- Nov 06, 2007
-
-
David Miller authored
A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Michael Chan <mchan@broadcom.com> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Miller authored
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008ded : "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by:
Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Miller authored
This reverts commit e3008ded . The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] tod clock: announce clocksource as perfect [S390] Rename "idle_time" attribute to "idle_time_us". [S390] Fix priority mistakes in drivers/s390/cio/cmf.c [S390] Fix memory detection. [S390] Fix compile on !CONFIG_SMP. [S390] device_schedule_callback() for dcssblk. [S390] Fix smsgiucv init on no iucv machines [S390] cio: use INIT_WORK to initialize struct work.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static
-
Kamalesh Babulal authored
Commit f2a0bd37 defines the function with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as "extern void cpm_load_patch(volatile immap_t *immr)" in the header file. Signed-off-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Lameter authored
Fix the memory leak that may occur when we attempt to reuse a cpu_slab that was allocated while we reenabled interrupts in order to be able to grow a slab cache. The per cpu freelist may contain objects and in that situation we may overwrite the per cpu freelist pointer loosing objects. This only occurs if we find that the concurrently allocated slab fits our allocation needs. If we simply always deactivate the slab then the freelist will be properly reintegrated and the memory leak will go away. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Prevent IO during partner login [SCSI] lpfc : Correct queue tag handling [SCSI] Update MAINTAINER email address and trees [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false
-
- Nov 05, 2007
-
-
Rusty Russell authored
After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Adrian Bunk authored
The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Adrian Bunk authored
This patch removes the no longer used EXPORT_SYMBOL_GPL(access_process_vm). Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Adrian Bunk authored
async_hcall() can become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Christian Borntraeger authored
The Time of Day clock is the standard time source for s390. It is - monotonic - allows very fast reading - architecture guarantees at least microsecond stepping - available as part of the architecture We should announce the rate of tod as 400 to be in sync with the description found in clocksource.h: "400-499:Perfect The ideal clocksource. A must-use where available." This change will prefer tod over less reliable clock sources. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Seems that people prefer to have the unit encoded in the attribute name. Also makes parsing easier. Now we have: # cat /sys/devices/system/cpu/cpu0/idle_time_us 131473592 instead of # cat /sys/devices/system/cpu/cpu0/idle_time 131473592 us Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Roel Kluin authored
Fixes priority mistakes similar to '!x & y' Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Yet another patch in the countless series of memory detection fixes: if the last area of the reported storage size is a hole the detection loop will loop forever. Just break chunk detection loop if its end is going to be larger than reported storage size. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Commit fae8b22d "[S390] Add per-cpu idle time / idle count sysfs attributes" causes a link error on !CONFIG_SMP. Fix this by adding some #ifdef's. Real fix would be to cleanup the code since we don't register a cpu on !CONFIG_SMP. But that would be quite a big patch. For the time being this is good enough. arch/s390/kernel/built-in.o: In function `do_monitor_call': (.text+0x50d4): undefined reference to `per_cpu__s390_idle' arch/s390/kernel/built-in.o: In function `cpu_idle': (.text+0x518c): undefined reference to `per_cpu__s390_idle' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
Unregistering a device from within a device attribute handler leads to a deadlock. Need to use device_schedule_callback() to unregister device in error path. Signed-off-by:
Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
smsgiucv is a driver that relies on iucv to work properly. If iucv ans smsgiucv are compiled into the kernel and run on an lpar the following scenario happens: iucv is initialized early as a subsystem. It checks for z/VM and returns with EPROTONOTSUPPORT. Later smsgiucv tries to run driver_register with iucv_bus as bus. As this bus is not initialized the driver core and list debugging issue several warnings and oopses. Solution is to let smsgiucv also check for z/VM and return EPROTONOTSUPPORT as well. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Use INIT_WORK to initialize struct work and don't initialize a struct work partial by explicitly initializing its private structures. Fixes the following lockdep bug because no key was assigned: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 0000000001f07bb8 0000000001f07bf8 0000000000000002 0000000000000000 0000000001f07c98 0000000001f07c10 0000000001f07c10 0000000000015406 0000000000000000 0000000000000002 0000000000000000 0000000000000000 0000000001f07bf8 000000000000000c 0000000001f07bf8 0000000001f07c68 000000000039ae60 0000000000015406 0000000001f07bf8 0000000001f07c48 Call Trace: ([<0000000000015376>] show_trace+0xda/0x104) [<0000000000015460>] show_stack+0xc0/0xf8 [<00000000000154c6>] dump_stack+0x2e/0x3c [<000000000006a71e>] __lock_acquire+0x47e/0x11a0 [<000000000006b4f0>] lock_acquire+0xb0/0xd8 [<00000000000555a6>] run_workqueue+0x1aa/0x24c [<00000000000556de>] worker_thread+0x96/0xf4 [<000000000005c210>] kthread+0x90/0xb4 [<000000000001947a>] kernel_thread_starter+0x6/0xc [<0000000000019474>] kernel_thread_starter+0x0/0xc Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
H. Peter Anvin authored
In accordance with the newly formalized 32-bit boot protocol, set %ebx == %ebp == %edi == 0 in order to support future extensions to the protocol. Signed-off-by:
H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
The 386 and 486 needs a jump immediately after setting %cr0 in order to serialize the pipeline. Signed-off-by:
H. Peter Anvin <hpa@zytor.com>
-
Linus Torvalds authored
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/sis: missing mutex unlock in error path. radeon: set the address to access the GART table on the CPU side correctly
-
Linus Torvalds authored
* 'an' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Utilize new SCSI event infrastructure SCSI: add asynchronous event notification API
-
Roel Kluin authored
airlied: separated this out from a patch on lkml. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
Dave Airlie <airlied@linux.ie>
-
Dave Airlie authored
This code relied on the CPU and GPU address for the aperture being the same, On some r5xx hardware I was playing with I noticed that this isn't always true. This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957) Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: iso and async streams: s/g list fix
-
Mark Lord authored
I have a system here that actively relies upon RTC wake alarms, and it has been failing (again) for a few days when attempting to use the /sys/class/rtc/rtc?/wakealarm interface. The old (fixed by Linus) /proc/ interface still works, but I'd like to get it using the new one. This patch fixes rtc-cmos to ignore the two upper bits when reading the BCD mday (day of month) register from CMOS. Some systems (eg. mine) seem to have the top bit set to "1" for some reason. The older /proc/ interface ignores the upper bits, and so we should too. Signed-off-by:
Mark Lord <mlord@pobox.com> Acked-by:
David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Nov 04, 2007
-
-
Jens Axboe authored
Torsten Kaiser wrote: > Looking that calltrace upwards, it seems replacing the > memset(dma->sglist,...) with sg_init_table(...) would fix the BUG_ON() > as that inits the SG_MAGIC. Tested-by:
Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de>
-
Jeff Garzik authored
An end to CD-ROM polling (if you have a device that supports AN)... hooray! Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Originally based on a patch by Kristen Carlson Accardi @ Intel. Copious input from James Bottomley. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them dm: bounce_pfn limit added Deadline iosched: Fix batching fairness Deadline iosched: Reset batch for ordered requests Deadline iosched: Factor out finding latter reques
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'sg' of git://git.kernel.dk/linux-2.6-block: [SG] Get rid of __sg_mark_end() cleanup asm/scatterlist.h includes SG: Make sg_init_one() use general table init functions
-
Linus Torvalds authored
Merge branch 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Update defconfigs. sh64: fix dma_cache_sync() compilation sh64: Move DMA macros from pci.h to scatterlist.h.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (24 commits) sh: Update r7785rp defconfig. sh: mach-type updates. sh: Fix up r7780rp highlander CF access size. sh: Terminate .eh_frame in VDSO with a 4-byte 0. sh: Correct SUBARCH matching. sh: Decouple 4k and soft/hardirq stacks. sh: Fix optimized __copy_user() movca.l usage. sh: Clean up SR.RB Kconfig mess. sh: Kill off dead ipr_irq_demux(). sh: Make SH7750 oprofile compile again. sh: Provide a __read_mostly section wrapper. sh: linker script tidying. sh: Move zero page param defs somewhere sensible. sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN. sh: Kill off legacy embedded ramdisk section. sh: Fix up early mem cmdline parsing. sh: Enable USBF on MS7722SE. sh: Add resource of USBF for SH7722. maple: Fix maple bus compiler warning sh: fix zImage build with >=binutils-2.18 ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (23 commits) libata: don't configure downstream links faster than the upstream link libata: request PHY speed configuration on SControl access failure libata: consider errors not associated with commands for speed down libata: more robust reset failure handling libata: cosmetic clean up / reorganization of ata_eh_reset() libata: fix timing computation in ata_eh_reset() libata: increase 128 KB / cmd limit for ATAPI tape drives sata_promise: fix endianess bug in ASIC PRD bug workaround libata: fix docbook make ata_scsi_lpm_get() static libata: suppress two warnings ata/sata_fsl: Remove ata_scsi_suspend/resume callbacks ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset() ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdef ata/sata_fsl: cleanup style problem ata/sata_fsl: remove unneeded sata_fsl_hardreset() ata/sata_fsl: remove unneeded on-stack copy of FIS ata/sata_fsl: cleanup needless casts to/from void __iomem * ata/sata_fsl: Remove unnecessary SCR cases ata/sata_fsl: Kill ata_sg_is_last() ...
-
Anton Altaparmakov authored
The regression was caused by: commit[a32ea1e1 ] Fix read/truncate race This causes ntfs_readpage() to be called for a zero i_size inode, which failed when the file was compressed and non-resident. Thanks a lot to Mike Galbraith for reporting the issue and tracking down the commit that caused the regression. Looking into it I found three bugs which the patch fixes. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Tested-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Robert Jennings authored
By setting the request_limit in send_srp_login to 1 we allowed login requests to be sent to the server adapter. If this was not an initial login, but was a login after a disconnect with the server, other I/O requests could attempt to be processed before the login occured. These I/O requests would fail, sometimes resulting in filesystems getting marked read-only. To address this we can set the request_limit to 0 while doing the login and add an exception where login requests, along with task management events, are always passed to the server. There is a case where the request_limit had already reached 0 would result in all events being sent rather than returning SCSI_MLQUEUE_HOST_BUSY; this has also been fixed by this patch. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Smart authored
This patch corrects the lpfc tag handling issue identified by Hannes Reinecke http://marc.info/?l=linux-scsi@m=119270235628850&w=2 The basis for this patch originated from Hajime Kai. Thank You Hajime. Signed-off-by:
<hajime-kai@soft.fujitsu.com> Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-