- Feb 07, 2012
-
-
Sebastian Andrzej Siewior authored
WindowsXP+BOT issues a MODE_SENSE request with page 0x1c which is not suppoerted by target. Target rejects that command with TCM_INVALID_CDB_FIELD, so far so good. On BOT I can't send the SENSE response back, instead I can only reply that an error occured. The next thing happens is a REQUEST_SENSE request with 18 bytes length. Since the check here is more than 18 bytes I have to NACK that request as well. This is not really required: We check for some additional room, but we never use it. The additional length is set to 0xa so the total length is 0xa + 8 = 18 which is fine with my 18 bytes. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Jan 18, 2012
-
-
Roland Dreier authored
My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Roland Dreier authored
My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by:
Dax Kelson <dkelson@gurulabs.com> Reported-by:
Andy Grover <agrover@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by:
Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Jesper Juhl authored
A statement such as struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); has undefined behaviour since there are two assignments to 'na', strictly speaking (the order in which side-effects from the assignments take place is undefined since there's no intervening sequence point), and it looks unintentional in any case. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Dan Carpenter authored
Signed bitfields are a problem because instead of being 1 or 0 like you'd expect they are 0 and -1. It doesn't cause a problem in this case but sparse complains: drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit signed bitfield Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98 [ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98 [ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57 [ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85 [ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10 [ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13 Reported-by:
<jrepac@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
- core_tpg_pre_addlun() returns always ERR_PTR() or the pointer, never NULL. The additional check for NULL in core_dev_add_lun() is not required. - core_tpg_pre_dellun() returns always ERR_PTR() or the pointer, never NULL. The check for NULL in core_dev_del_lun() is wrong. The third argument (int *) is never used, remove it. - core_dev_add_lun() returns always NULL or the pointer, never ERR_PTR. The check for IS_ERR() is not required. (nab: Convert core_dev_add_lun() use err.h macros for failure handling to be consistent with the rest of target_core_fabric_configfs.c callers) Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
It may happen that uasp will free the request in irq conntext, the callchain: uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count() where the last function enables the IRQ. Those irqs are re-disabled later (due to the spin.*irq_restore) but in between we could get hurt. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
The multiple calls to pr_debug() each with one letter results in a new line. This patch merges the multiple requests into one call per line so we don't have the multiple line cuts. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Roland Dreier authored
According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
roland@purestorage.com authored
Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data buffers wastes a lot of CPU clearing pages that will be quickly be overwritten by the actual data. However, for emulated control commands such as INQUIRY and so on, the code does assume that the buffer is zeroed. To avoid this CPU overhead, skip the __GFP_ZERO for commands that are actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Marco Sanvido authored
Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by:
Marco Sanvido <marco@purestorage.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Marco Sanvido authored
The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by:
Marco Sanvido <marco@purestorage.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
We never embedd the bio into a structure, so there is no need to allocate 64 bytes of headroom per bio. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Dec 16, 2011
-
-
Roland Dreier authored
The target code was not setting the additional sense length field in the sense data it returned, which meant that at least the Linux stack ignored the ASC/ASCQ fields. For example, without this patch, on a tcm_loop device: # sg_raw -v /dev/sda 2 0 0 0 0 0 gives cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Raw sense data (in hex): 70 00 05 00 00 00 00 00 while after the patch we correctly get the following (which matches what a regular disk returns): cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid command operation code Raw sense data (in hex): 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Dec 14, 2011
-
-
Nicholas Bellinger authored
This patch removes a legacy se_dev_check_online() check from within transport_execute_tasks() that should no longer be necessary as transport_lookup_cmd_lun() is already making this call. Using transport_cmd_check_stop() from transport_execute_tasks() should already be checking per se_cmd context for each descriptor upon active I/O shutdown, so no need to acquire dev->dev_status_lock again while executing se_task submission. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch removes the original usage of __transport_execute_tasks() ahead of every transport_get_cmd_from_queue() call in transport_processing_thread(). This helps reduce se_device->execute_task_lock contention between qla2xxx wq with target_submit_cmd() for READs and transport_processing_thread() context servicing WRITEs with full payloads for I/O submission. It also adds a __transport_execute_tasks() to kick the task queue again without a *se_cmd descriptor with existing queue full logic, but this may end up not being necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch makes __transport_execute_tasks() perform the addition of tasks to dev->execute_task_list via __transport_add_tasks_from_cmd() while holding dev->execute_task_lock during normal I/O fast path submission. It effectively removes the unnecessary re-acquire of dev->execute_task_lock during transport_execute_tasks() -> transport_add_tasks_from_cmd() ahead of calling __transport_execute_tasks() to queue tasks for the passed *se_cmd descriptor. (v2: Re-add goto check_depth usage for multi-task submission for now..) Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
Historically, pSCSI devices have been the ones that required target-core to enforce a per se_device->depth_left. This patch changes target-core to no longer (by default) enforce a per se_device->depth_left or sleep in transport_tcq_window_closed() when we out of queue slots for all backend export cases. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch makes __transport_execute_tasks() use a local *se_dev reference to prevent direct se_cmd->se_dev access after transport_cmd_check_stop() -> transport_add_tasks_from_cmd() has been called, as in the current implementation we can expect __transport_execute_tasks() may be called from another context that may have already completed the I/O. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
Remove the now unused target_core_fabric_ops->check_release_cmd() as target_core handles this directly for se_cmd->cmd_kref objects now. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch converts the main ft_send_work() I/O path to use target_submit_cmd() with a single se_cmd->cmd_kref reference that is released via the existing ft_check_stop_free() response path callback. It also makes ft_send_tm() use transport_init_se_cmd() and target_get_sess_cmd() to also use single se_cmd->cmd_kref reference. Cc: Christoph Hellwig <hch@lst.de> Cc: Kiran Patil <kiran.patil@intel.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch adds a target_submit_cmd() caller that can be used by fabrics to submit an uninitialized se_cmd descriptor to an struct se_session + unpacked_lun from workqueue process context. This call will invoke the following steps: - transport_init_se_cmd() to setup se_cmd specific pointers - Obtain se_cmd->cmd_kref references with target_get_sess_cmd() - set se_cmd->t_tasks_bidi - transport_lookup_cmd_lun() to setup struct se_cmd->se_lun from the passed unpacked_lun - transport_generic_allocate_tasks() to setup the passed *cdb, and - transport_handle_cdb_direct() handle READ dispatch or WRITE ready-to-transfer callback to fabric v2 changes from hch feedback: *) Add target_sc_flags_table for target_submit_cmd flags *) Rename bidi parameter to flags, add TARGET_SCF_BIDI_OP *) Convert checks to BUG_ON *) Add out_check_cond for transport_send_check_condition_and_sense usage v3 changes: *) Add TARGET_SCF_ACK_KREF for target_submit_cmd into target_get_sess_cmd to determine when the fabric caller is expecting a second kref_put() from fabric packet acknowledgement. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch moves target_put_sess_cmd() to use a se_cmd->cmd_kref callback target_release_cmd_kref when performing driver release of fabric->se_cmd descriptor memory. It sets the default cmd_kref count value to '2' within target_get_sess_cmd() setup, and currently assumes TFO->check_stop_free() usage. It drops se_tfo->check_release_cmd() usage in the main transport_release_cmd codepath. Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Roland Dreier authored
Current SCSI specs say that the "response format" field in the standard INQUIRY response should be set to 2, and all the real SCSI devices I have do put 2 here. So let's do that too. Signed-off-by:
Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
This includes: - remove on _ in "__NAMELEN" in $fabric _make_tport - target_fabric_configfs_init() returns an error pointer and not NULL anymore. Consider that. - replace (!(var_name)) with (!var_name). The extra () are not required - remove #ifdef MODULE. If the code is builtin it needs an init function or the code is useless - put exit/clean functions into __exit Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch fixes TFO->release_cmd() and removes legacy pack_lun() usage and new_cmd_failure when generating new TCM fabric skeleton from the tcm_mod_builder.py script. Reported-by:
Stefan Bergstrand <stefan.bergstrand@sdsab.se> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
If we want dynamically allocated objects to be cacheline aligned we need to tell that to the slab allocator by using the proper flags and not by liberally sprinkling annotations onto all structures. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
There is not reason to artifically limit max_sectors in tcm_loop, set it to UINT_MAX to allow stressing the large I/O handling in the target core using the loopback driver. Also remove various superflous defines hiding the values set in the host template. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
This patch strips the trailing newline from backend device udev_path and alias attributes. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch makes chap_server_compute_md5() use proper unsigned long usage for the CHAP_I (identifier) and check for values beyond 255 as per RFC-1994. Reported-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Jörn Engel authored
A reader should spend an extra moment whenever noticing a cast, because either something special is going on that deserves extra attention or, as is all too often the case, the code is wrong. These casts, afaics, have all been useless. They cast a foo* to a foo*, cast a void* to the assigned type, cast a foo* to void*, before assigning it to a void* variable, etc. In a few cases I also removed an additional &...[0], which is equally useless. Lastly I added three FIXMEs where, to the best of my judgement, the code appears to have a bug. It would be good if someone could check these. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Jörn Engel authored
- rename to target_check_cdb_and_preempt - use non-safe list_for_each_entry - move common check into callee (simplifying callers) Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Jörn Engel authored
And make it static afterwards. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Sebastian Andrzej Siewior authored
The command | echo rd_pages=32768 > ramdisk/control Does not work because it writes "rd_pages=32768\n" and the parser which matches for "rd_pages=%d" does not recognize it due to the \n. One way of fixing this would be using "echo -n" instead. This patch adds \n to the list of separators so we don't have to use the -n argument which I find is more convinient. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Christoph Hellwig authored
There is no need to make task_state_active an atomic_t given that it is always set under the execute_task_lock so we can make it a simple bool. Also rename it to t_state_active to be closer to the list it guards, and make sure all checks before the list addion/removal actually happen under execute_task_lock. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-