- Feb 02, 2008
-
-
Oliver Neukum authored
this covers the rest of the obvious cases by using the flags and locks to guard against disconnect which were introduced in the earlier patch against mos7720. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
If disconnect() is called for a logical disconnect, no more IO must be done after disconnect() returns, or the old and new drivers may conflict. This patch avoids this by using the flag and lock introduced by the earlier patch for the mos7720 driver. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
in an error case memory already allocated must be freed again. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
this driver uses usb_get_intfdata() == NULL as a test for disconnect(). You must not do that as this races with probe(). By the time you test your erstwhile interface may already be somebody else's interface. This fixes the close() method of cypress_m8 to use the recently introduced flag and use locking against disconnect() where required in close(). Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jan Engelhardt authored
Signed-off-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
This fixes a problem where the mos7720 driver will make io to a device from which it has been logically disconnected. It does so by introducing a flag by which the generic usb serial code can signal the subdrivers their disconnection and appropriate locking. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Yoshihiro Shimoda authored
add support for SuperH OHCI. supported CPU are: - SH7720 - SH7721 - SH7763 Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
People keep trying to add entries to this section of the driver for things. That's what the Changelog is supposed to be for, not the .c file. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Chavent authored
When building an external module, the ezusb_* functions are not defined if we haven't loaded any built'in module that use them (whiteheat, keyspan, ...). This patch allow to build those functions even if we only have selected the usbserial generic driver. Signed-off-by:
Paul Chavent <paul.chavent@fnac.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1031) adds a short delay to the bus-suspend routine in ehci-hcd. Without it some devices disconnect when they should suspend. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1030b) moves a del_timer_sync() call outside the scope of a spinlock, where it could cause a deadlock, and adds a new del_timer_sync() call for the new IAA watchdog timer (it was omitted by mistake). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Pete Zaitcev authored
The ISO descriptors are allocated separately in proc_submiturb for a fetch from user mode, then tucked at the end of URB. This seems like a dead code. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This has some bugfixes for the EHCI driver's ISO transfer scanning logic. It was leaving ITDs and SITDs on the schedule too long, for a few different reasons, which caused trouble. (a) Look at all microframes for high speed transfers, not just the ones we expect to have finished. This way transfers ending mid-frame will complete without needing another IRQ. This also minimizes bogus scheduling underruns (e.g. EL2NSYNC). (b) When we encounter an ISO transfer (either speed, but this hits mostly at full speed) that's not yet been completed, immediately stop scanning; we've caught up to the hardware, no matter what other indications might say. (c) Always clean up ITDs (for high speed transfers) when the HC is no longer running. I'm not sure whether the last one has been observed before, but both the others have been reported with "real world" audio and video code. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Small updates to the EHCI driver's ISO support: - Get rid of the Kconfig option for full speed ISO. It may not be perfect yet, but it hasn't appeared to be dangerous and pretty much every configuration wants it. - Instead of two places to disable an empty periodic schedule after an ISO transfer completes, just have one. - After the periodic schedule is disabled, we can short-circuit the schedule scan ... it can't possibly have more work to do. Assuming a typical config with split iso enabled, the only change in behavior should be almost unobservable: quicker termination of periodic scans when the schedule gets emptied. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Karsten Wiese authored
In the EHCI driver, itd->usecs[8] is used in periodic_usecs(), indexed by uframe. For an ITD's unused uframes it is 0, else it contains the same value as itd->stream->usecs. To check if an ITD's uframe is used, we can instead test itd->hw_transaction[uframe]: if used, it will be nonzero no matter what endianess is used. This patch replaces those two uses, eliminates itd->usecs[], and saves eight bytes from each ITD. Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vladimir Barinov authored
EHCI Glue driver for Intel IXP4XX EHCI USB controller Signed-off-by:
Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Walker authored
The dev->sem conforms to mutex style usage. This patch converts it to use the struct mutex type, and new API. There is also a small style fix around this comment, /* unlock here as tower_delete frees dev */ Where I broke the line up to meet the 80 char limit. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Valentine Barshak authored
This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by:
Valentine Barshak <vbarshak@ru.mvista.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Stefan Roese <sr@denx.de> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Eremin-Solenikov authored
Use debugfs instead of /proc/driver/udc Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Various small at91_udc cleanups: - Use generic GPIO calls, not older platform-specific ones - Use gpio_request()/gpio_free() - Use VERBOSE_DEBUG convention, not older VERBOSE - Fix sparse complaint about parameter type (changed to gfp_t) - Add missing newline to some rarely-seen debug messages - Fix some old cleanup bugs on probe() fault paths Also add a mechanism whereby rm9200 gpios can drive the D+ pullup through an inverting transistor, based on a patch from Steve Birtles. Most UDC drivers supporting a GPIO based pullup should probably have such an option, but testing it requries such a board in hand! Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Steve Birtles <arm_kernel_development@micromark.net.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Update the ohci-at91 bus glue to start understanding about the per-port power switch GPIOs it's given (on the sam9263-ek and potentially other boards). For the moment this just claims them and forces them active (assuming active-low power enables) whenever the HCD is loaded. The assumption is still that board setup configures the GPIOs. Using gpio_request() tracks actual usage and guards against conflict. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
This documents two newly created files: /sys/bus/usb/device/.../power/connected_duration /sys/bus/usb/device/.../power/active_duration Documentation was placed in Documentation/ABI/testing, since that's where the documentation is for the other USB sysfs power files. Signed-off-by:
Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
This patch exports two statistics to userspace: /sys/bus/usb/device/.../power/connected_duration /sys/bus/usb/device/.../power/active_duration connected_duration is the total time (in msec) that the device has been connected. active_duration is the total time the device has not been suspended. With these two statistics, tools like PowerTOP can calculate the percentage time that a device is active, i.e. not suspended or auto-suspended. Users can also use the active_duration to check if a device is actually autosuspended. Currently, they can set power/level to auto and power/autosuspend to a positive timeout, but there's no way to know from userspace if a device was actually autosuspended without looking at the dmesg output. These statistics will be useful in creating an automated userspace script to test autosuspend for USB devices. Signed-off-by:
Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin Lloyd authored
The following improvements were made: - Fixed control line issue where asserting DTR on ep5 would close ep2 - Added support for calc_num_ports (will help support future composite devices) Signed-off-by:
Kevin Lloyd <linux@sierrawireless.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Harald Welte authored
[PATCH] ftdi_sio: add support for more FTDI based JTAG adaptors There are more devices similar to the Olimex JTAG adaptor, in that the first port of the FT2232C is used for JTAG, and only the second port is available as UART. I have thus renamed ftdi_olimex_{probe,quirk} to ftdi_jtag_{probe,quirk} and added vendor/product ID's for the OpenMoko Neo1973 Debug Board as well as the OOCDlink device. I've also updated the KERN_INFO message sent to userspace to remove the word 'olimex' and an extra '\n' that was causing an empty line in dmesg. Signed-off-by:
Harald Welte <laforge@openmoko.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Don't pass NULL into termios functions when calling them internally Remove all the crap which then checks for NULL which can't occur now Clear CMSPAR as it is not supported Report the baud rate back to the caller properly (See FIXME someone with the docs) Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Remove internal NULL passing in termios code Remove all the if checks it causes Encode the baud rate back properly Clear CMSPAR as it is not supported Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Remove lots of NULL checks that can no longer occur Encode the baud rate back into the termios (again someone with docs see FIXME to improve this further) Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Eremin-Solenikov authored
Use gpio_vbus instead of udc_is_connected for udc on tosa. Signed-off-by:
Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Add a missing dependency which goofs up the xconfig display. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Fix a small glitch noted by Yannick Cote. There is no endpoint number six, so if a (broken) host wrongly tried to change or read status of that endpoint, the driver could access reserved register space. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Yannick Cote <yanick@yanos.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
Am Sonntag, 16. Dezember 2007 05:23:47 schrieb Andrew Morton: > On Sat, 15 Dec 2007 07:08:52 -0800 (PST) bugme-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=9573 > > There's a null pointer dereference on drivers/usb/serial/whiteheat.c as > > follows: > > > > (1) line 613: the test "if (port->tty)" implies that null is a legal value > > for "port->tty" at that point > > > > (2) neither firm_open nor firm_purge initialize "port->tty" drivers/usb/serial/usb-serial::serial_open() sets port->tty The check for NULL is bogus. This patch removes the check. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Fix potential (never-observed) oops on rare error path, bugzilla #9594. Fix uses the same test as used earlier. Also make the adjacent "else" block look like an "else" block instead of hiding like a bug. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Kernel bugzilla entry #9569 reports a potential OOPS in some code supporting the integrated root hub TT support used on ARC/TDI derived cores. (This seems to have been a longstanding issue.) This patch cleans up usage of urb->dev->tt to avoid that potential oops and also fixes some overly long lines. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tzachi Perelstein authored
Some glue bits for the on-chip USB host controller in the Marvell Orion family of ARM SoCs, which is basically EHCI compatible. Signed-off-by:
Tzachi Perelstein <tzachi@marvell.com> Reviewed-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Marcin Slusarz authored
fix warning: drivers/usb/host/ehci-hcd.c:832:8: warning: symbol 'status' shadows an earlier one drivers/usb/host/ehci-hcd.c:790:71: originally declared here Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Marcin Slusarz authored
fix warning: drivers/usb/core/devio.c:1226:20: warning: incorrect type in assignment (different address spaces) drivers/usb/core/devio.c:1226:20: expected void *usercontext drivers/usb/core/devio.c:1226:20: got void [noderef] <asn:1>* Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Marcin Slusarz authored
fix warnings: drivers/usb/storage/initializers.c:83:26: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/initializers.c:83:26: expected unsigned int *act_len drivers/usb/storage/initializers.c:83:26: got int *<noident> drivers/usb/storage/initializers.c:89:26: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/initializers.c:89:26: expected unsigned int *act_len drivers/usb/storage/initializers.c:89:26: got int *<noident> Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This adds a workaround for an issue reported with ISO transfers on some EHCI controllers, most recently with VIA KT800 and PS3 EHCI silicon. The issue is that the silicon doesn't necessarily seem to be done using ISO DMA descriptors (itd, sitd) when it marks them inactive. (One theory is that the ill-defined mechanism where hardware caches periodic transfer descriptors isn't invalidating their state...) With such silicon, quick re-use of those descriptors makes trouble. Waiting until the next frame seems to be a sufficient workaround. This patch ensures that the relevant descriptors aren't available for immediate re-use. It does so by not recycling them until after issuing the completion callback which would reuse them by enqueueing an URB and thus (re)allocating ISO DMA descriptors. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Geoff Levand <geoffrey.levand@am.sony.com> Cc: Masashi Kimoto <Masashi_Kimoto@hq.scei.sony.co.jp> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-