- Dec 17, 2010
-
-
Dimitris Michailidis authored
The driver keeps a bitmap of the netdevs it registered so it knows what to unregister later. Remove that and look at reg_state instead. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
Remove a field the driver uses to keep track of the name of the first netdev it manages to register. Do this by changing the registration loop to stop the first time it fails so the first registered device is trivial to tell. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
The last byte of the buffer for MSI-X names could not be used due to a bogus -1. Also do not explicitly clear the last byte, snprintf will do the right thing. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
Currently MSI-X names for netdevs with long names are truncated in /proc/interrupts due to insufficient space. Use IFNAMSIZ to size the needed space. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
Print information about each port when its netdev is registered instead of looping separately over the ports at the end. The bulk of this patch is due to indentation change. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
And fix the supported flags ethtool reports for the two cases. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
The number of queues is known early, move the calls to netif_set_real_num_[rt]x_queues before register_netdev. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
No need to read the clock frequency from VPD, we already get it a bit later from FW, after any potential adjustments. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dimitris Michailidis authored
Enable relaxed ordering for descriptor reads and packet I/O. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Includes FCoE releated fixes in FW flows Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Add appropriate HW DCB/PFC configuration Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
Move the calcualation of the Tx hash for a given hash range into a separate function and define the skb_tx_hash(), which calculates a Tx hash for a [0; dev->real_num_tx_queues - 1] hash values range, using this function (__skb_tx_hash()). Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Dec 15, 2010
-
-
David S. Miller authored
Like RTAX_ADVMSS, make the default calculation go through a dst_ops method rather than caching the computation in the routing cache entries. Now dst metrics are pretty much left as-is when new entries are created, thus optimizing metric sharing becomes a real possibility. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
- Dec 14, 2010
-
-
David S. Miller authored
Make all RTAX_ADVMSS metric accesses go through a new helper function, dst_metric_advmss(). Leave the actual default metric as "zero" in the real metric slot, and compute the actual default value dynamically via a new dst_ops AF specific callback. For stacked IPSEC routes, we use the advmss of the path which preserves existing behavior. Unlike ipv4/ipv6, DecNET ties the advmss to the mtu and thus updates advmss on pmtu updates. This inconsistency in advmss handling results in more raw metric accesses than I wish we ended up with. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Since this driver is implemented as NAPI, netif_receive_skb must be used not netif_rx. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Add setting TEC/REC statistics processing. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
For reduce "if" condition, easy to read/understand the code, optimize "if" condition in rx/tx processing. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Fix incorrect return processing. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Currently, in case this driver is integrated as module, and when this module is re-installed, no interrupts is to be occurred. For the above issue, move MSI processing to open/release processing. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Comment optimization Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Modify miss-setting status issue at suspend. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Modify like use calculated value directly passed by CAN core module. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Delete unnecessary/redundant code Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Fix coding rule violation. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
For easy to readable, use netdev_dbg instead of dev_dbg partly Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Currently, Copyright and module description are not formal. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
For improve tx/rx speed, reduce register access. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Currently, these two functions spec(returned value) is unnatural. Thus, change the return value's spec Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
For easy to read/understand, Rename function/macro name. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Currently, in case CONFIG_PM is disabled, compiler outputs warnings. Move six functions which are used only CONFIG_PM is enabled, into "#ifdef CONFIG_PM" area. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tomoya authored
Replace complex "goto" to "do~while". For easy to read/understand, it divides a rx function into some functions. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-