- Oct 22, 2017
-
-
Bernd Edlinger authored
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c9 ("stmmac: review RX/TX ring management") Signed-off-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix spellos (typos) in textsearch library helpers. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Don't release call mutex at the end of rxrpc_kernel_begin_call() if the call pointer actually holds an error value. Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fix HW timestamping Three fixes for HW timestamping feature, all of them for RX side. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Prevent infinite loop by correctly setting the loop condition to break when i == 10. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
When using GMAC4 the valid timestamp is from CTX next desc but we are passing the previous desc to get_rx_timestamp_status() callback. Fix this and while at it rework a little bit the function logic. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
When RX HW timestamp is enabled and a frame is discarded we are not freeing the skb but instead only setting to NULL the entry. Add a call to dev_kfree_skb_any() so that skb entry is correctly freed. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels Petr says: Currently mlxsw only offloads tunnels that are configured with TTL of "inherit" (which is the default). However, Spectrum defaults to 255 and the driver neglects to change the configuration. Thus the tunnel packets from offloaded tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are never actually offloaded. To fix this, introduce support for TIGCR, the register that keeps the related bits of global tunnel configuration, and use it on first offload to properly configure inheritance of TTL of tunnel packets from overlay packets. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Spectrum tunnels do not default to ttl of "inherit" like the Linux ones do. Configure TIGCR on router init so that the TTL of tunnel packets is copied from the overlay packets. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The TIGCR register is used for setting up the IPinIP Tunnel configuration. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Niklas Söderlund authored
Commit 9cab88726929605 ("net: ethtool: Add back transceiver type") restores the transceiver type to struct ethtool_link_settings and convert_link_ksettings_to_legacy_settings() but forgets to remove the error check for the same in convert_legacy_settings_to_link_ksettings(). This prevents older versions of ethtool to change link settings. # ethtool --version ethtool version 3.16 # ethtool -s eth0 autoneg on speed 100 duplex full Cannot set new settings: Invalid argument not setting speed not setting duplex not setting autoneg While newer versions of ethtool works. # ethtool --version ethtool version 4.10 # ethtool -s eth0 autoneg on speed 100 duplex full [ 57.703268] sh-eth ee700000.ethernet eth0: Link is Down [ 59.618227] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx Fixes: 19cab887 ("net: ethtool: Add back transceiver type") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by:
Renjith R V <renjith.rv@quest-global.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When vlan tunnels were introduced, vlan range errors got silently dropped and instead 0 was returned always. Restore the previous behaviour and return errors to user-space. Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Syzkaller hits WARN_ON(sk->sk_wmem_queued) in sk_stream_kill_queues after triggering an EFAULT in __zerocopy_sg_from_iter. On this error, skb_zerocopy_stream_iter resets the skb to its state before the operation with __pskb_trim. It cannot kfree_skb like datagram callers, as the skb may have data from a previous send call. __pskb_trim calls skb_condense for unowned skbs, which adjusts their truesize. These tcp skbuffs are owned and their truesize must add up to sk_wmem_queued. But they match because their skb->sk is NULL until tcp_transmit_skb. Temporarily set skb->sk when calling __pskb_trim to signal that the skbuffs are owned and avoid the skb_condense path. Fixes: 52267790 ("sock: add MSG_ZEROCOPY") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Two BPF fixes for range marking The set contains two fixes for direct packet access range markings and test cases for all direct packet access patterns that the verifier matches on. They are targeted for net tree, note that once net gets merged into net-next, there will be a minor merge conflict due to signature change of the function find_good_pkt_pointers() as well as data_meta patterns present in net-next tree. You can just add bool false to the data_meta patterns and I will follow-up with properly converting the patterns for data_meta in a similar way. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Lets add test cases to cover really all possible direct packet access tests for good/bad access cases so we keep tracking them. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Alexander had a test program with direct packet access, where the access test was in the form of data + X > data_end. In an unrelated change to the program LLVM decided to swap the branches and emitted code for the test in form of data + X <= data_end. We hadn't seen these being generated previously, thus verifier would reject the program. Therefore, fix up the verifier to detect all test cases, so we don't run into such issues in the future. Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Reported-by:
Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
During review I noticed that the current logic for direct packet access marking in check_cond_jmp_op() has an off by one for the upper right range border when marking in find_good_pkt_pointers() with BPF_JLT and BPF_JLE. It's not really harmful given access up to pkt_end is always safe, but we should nevertheless correct the range marking before it becomes ABI. If pkt_data' denotes a pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end in the true branch as well as for pkt_end <= pkt_data' in the false branch we mark the range with X although it should really be X - 1 in these cases. For example, X could be pkt_end - pkt_data, then when testing for pkt_data' < pkt_end the verifier simulation cannot deduce that a byte load of pkt_data' - 1 would succeed in this branch. Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Fastabend authored
An integer overflow is possible in dev_map_bitmap_size() when calculating the BITS_TO_LONG logic which becomes, after macro replacement, (((n) + (d) - 1)/ (d)) where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid overflow cast to u64 before arithmetic. Reported-by:
Richard Weinberger <richard@nod.at> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Oct 21, 2017
-
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: Atlantic driver 10/2017 updates This patchset fixes various issues in driver, improves parameters for better performance on 10Gbit link ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Default Tx rates cause very long ISR delays on Tx. 0xff is 510us delay, giving only ~ 2000 interrupts per seconds for Tx rings cleanup. With these settings udp tx rate was never higher than ~800Mbps on a single stream. Changing min delay to 0xF makes it way better with ~6Gbps TCP stream performance is almost unaffected by this change, since LSO optimizations play important role. CPU load is affected insignificantly by this change. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
That may lead to mmio resource leakage. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
There is no much practical use from having MSIX vectors more that number of cpus, thus cap this first with preconfigured limit, then with number of cpus online. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
When doing ifconfig down/up, driver did not reported carrier_off neither in nic_stop nor in nic_start. That caused link to be visible as "up" during couple of seconds immediately after "ifconfig up". Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Queue stat strings are cleaned up, duplicate stat name strings removed, queue restarts counter added Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Internal statistics system on chip never gets reset until hardware reboot. This is quite inconvenient in terms of ethtool statistics usage. This patch implements incremental statistics update inside of service callback. Upon nic initialization, first request is done to fetch initial stat data, current collected stat data gets cleared. Internal statistics mailbox readout is improved to save space and increase readability Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
In the UDP code there are two leftover error messages with very few meaning. Replace them with a more descriptive error message as some users reported them as "strange network error". Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
On big-endian machines, functions converting between tunnel ID and VNI use the three LSBs of tunnel ID storage to map VNI. The comparison function eq_tun_id_and_vni(), on the other hand, attempted to map the VNI from the three MSBs. Fix it by using the same check implemented on LE, which maps VNI from the three LSBs of tunnel ID. Fixes: 2e0b26e1 ("geneve: Optimize geneve device lookup.") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.14-20171019' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-10-19 this is a pull request of 11 patches for the upcoming 4.14 release. There are 6 patches by ZHU Yi for the flexcan driver, that work around the CAN error handling state transition problems found in various incarnations of the flexcan IP core. The patch by Colin Ian King fixes a potential NULL pointer deref in the CAN broad cast manager (bcm). One patch by me replaces a direct deref of a RCU protected pointer by rcu_access_pointer. My second patch adds missing OOM error handling in af_can. A patch by Stefan Mätje for the esd_usb2 driver fixes the dlc in received RTR frames. And the last patch is by Wolfgang Grandegger, it fixes a busy loop in the gs_usb driver in case it runs out of TX contexts. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
Without the patch, when hvs_open_connection() hasn't completely established a connection (e.g. it has changed sk->sk_state to SS_CONNECTED, but hasn't inserted the sock into the connected queue), vsock_stream_connect() may see the sk_state change and return the connection to the userspace, and next when the userspace closes the connection quickly, hvs_release() may not see the connection in the connected queue; finally hvs_open_connection() inserts the connection into the queue, but we won't be able to purge the connection for ever. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Cc: Marcelo Cerri <marcelo.cerri@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
The length of GVI (GetVersionInfo) response packet should be 40 instead of 36. This issue was found from /sys/kernel/debug/ncsi/eth0/stats. # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 0 0 2 With this applied, no error reported on GVI response packets: # ethtool --ncsi eth0 swstats : RESPONSE OK TIMEOUT ERROR ======================================= GVI 2 0 0 Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
The NCSI channel has been configured to provide service if its link monitor timer is enabled, regardless of its state (inactive or active). So the timeout event on the link monitor indicates the out-of-service on that channel, for which a failover is needed. This sets NCSI_DEV_RESHUFFLE flag to enforce failover on link monitor timeout, regardless the channel's original state (inactive or active). Also, the link is put into "down" state to give the failing channel lowest priority when selecting for the active channel. The state of failing channel should be set to active in order for deinitialization and failover to be done. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
When there are no NCSI channels probed, HWA (Hardware Arbitration) mode is enabled. It's not correct because HWA depends on the fact: NCSI channels exist and all of them support HWA mode. This disables HWA when no channels are probed. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Samuel Mendoza-Jonas authored
ncsi_channel_monitor() misses stopping the channel monitor in several places that it should, causing a WARN_ON_ONCE() to trigger when the monitor is re-started later, eg: [ 459.040000] WARNING: CPU: 0 PID: 1093 at net/ncsi/ncsi-manage.c:269 ncsi_start_channel_monitor+0x7c/0x90 [ 459.040000] CPU: 0 PID: 1093 Comm: kworker/0:3 Not tainted 4.10.17-gaca2fdd #140 [ 459.040000] Hardware name: ASpeed SoC [ 459.040000] Workqueue: events ncsi_dev_work [ 459.040000] [<80010094>] (unwind_backtrace) from [<8000d950>] (show_stack+0x20/0x24) [ 459.040000] [<8000d950>] (show_stack) from [<801dbf70>] (dump_stack+0x20/0x28) [ 459.040000] [<801dbf70>] (dump_stack) from [<80018d7c>] (__warn+0xe0/0x108) [ 459.040000] [<80018d7c>] (__warn) from [<80018e70>] (warn_slowpath_null+0x30/0x38) [ 459.040000] [<80018e70>] (warn_slowpath_null) from [<803f6a08>] (ncsi_start_channel_monitor+0x7c/0x90) [ 459.040000] [<803f6a08>] (ncsi_start_channel_monitor) from [<803f7664>] (ncsi_configure_channel+0xdc/0x5fc) [ 459.040000] [<803f7664>] (ncsi_configure_channel) from [<803f8160>] (ncsi_dev_work+0xac/0x474) [ 459.040000] [<803f8160>] (ncsi_dev_work) from [<8002d244>] (process_one_work+0x1e0/0x450) [ 459.040000] [<8002d244>] (process_one_work) from [<8002d510>] (worker_thread+0x5c/0x570) [ 459.040000] [<8002d510>] (worker_thread) from [<80033614>] (kthread+0x124/0x164) [ 459.040000] [<80033614>] (kthread) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) This also updates the monitor instead of just returning if ncsi_xmit_cmd() fails to send the get-link-status command so that the monitor properly times out. Fixes: e6f44ed6 "net/ncsi: Package and channel management" Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Samuel Mendoza-Jonas authored
Correct the value of the HNCDSC AEN packet. Fixes: 7a82ecf4 "net/ncsi: NCSI AEN packet handler" Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzkaller got crashes in packet_getsockopt() processing PACKET_ROLLOVER_STATS command while another thread was managing to change po->rollover Using RCU will fix this bug. We might later add proper RCU annotations for sparse sake. In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu() variant, as spotted by John. Fixes: a9b63918 ("packet: rollover statistics") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: John Sperbeck <jsperbeck@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce105008 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-