- Jul 20, 2012
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull last minute Ceph fixes from Sage Weil: "The important one fixes a bug in the socket failure handling behavior that was turned up in some recent failure injection testing. The other two are minor bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: endian bug in rbd_req_cb() rbd: Fix ceph_snap_context size calculation libceph: fix messenger retry
-
- Jul 19, 2012
-
-
git://neil.brown.name/mdLinus Torvalds authored
Pull three md bugfixes from NeilBrown: "One of the bugs was introduced in 3.5-rc1. Others have been there for longer." * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid1: close some possible races on write errors during resync md: avoid crash when stopping md array races with closing other open fds. md: fix bug in handling of new_data_offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "Ok, we should be good to go now" 1) We have to statically initialize the init_net device list head rather than do so in an initcall, otherwise netprio_cgroup crashes if it's built statically rather than modular (Mark D. Rustad) 2) Fix SKB null oopser in CIPSO ipv4 option processing (Paul Moore) 3) Qlogic maintainers update (Anirban Chakraborty) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Statically initialize init_net.dev_base_head MAINTAINERS: Changes in qlcnic and qlge maintainers list cipso: don't follow a NULL pointer when setsockopt() is called
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID update from Jiri Kosina: "A final round of changes for HID for 3.5: just device ID additions." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: add support for Zytronic panels HID: add Sennheiser BTD500USB device support HID: add battery quirk for Apple Wireless ANSI
-
Ezequiel Garcia authored
The strcpy was being used to set the name of the board. Since the destination char* was read-only and the name is set statically at compile time; this was both wrong and redundant. The type of char* is changed to const char* to prevent future errors. Reported-by:
Radek Masin <radek@masin.eu> Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> [ Taking directly due to vacations - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Benjamin Tissoires authored
Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
NeilBrown authored
commit 4367af55 md/raid1: clear bad-block record when write succeeds. Added a 'reschedule_retry' call possibility at the end of end_sync_write, but didn't add matching code at the end of sync_request_write. So if the writes complete very quickly, or scheduling makes it seem that way, then we can miss rescheduling the request and the resync could hang. Also commit 73d5c38a md: avoid races when stopping resync. Fix a race condition in this same code in end_sync_write but didn't make the change in sync_request_write. This patch updates sync_request_write to fix both of those. Patch is suitable for 3.1 and later kernels. Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Original-version-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
md will refuse to stop an array if any other fd (or mounted fs) is using it. When any fs is unmounted of when the last open fd is closed all pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put) so there will be no pending IO to worry about when the array is stopped. However in order to send the STOP_ARRAY ioctl to stop the array one must first get and open fd on the block device. If some fd is being used to write to the block device and it is closed after mdadm open the block device, but before mdadm issues the STOP_ARRAY ioctl, then there will be no last-close on the md device so __blkdev_put will not call sync_blockdev. If this happens, then IO can still be in-flight while md tears down the array and bad things can happen (use-after-free and subsequent havoc). So in the case where do_md_stop is being called from an open file descriptor, call sync_block after taking the mutex to ensure there will be no new openers. This is needed when setting a read-write device to read-only too. Cc: stable@vger.kernel.org Reported-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
commit c6563a8c md: add possibility to change data-offset for devices. introduced a 'new_data_offset' attribute which should normally be the same as 'data_offset', but can be explicitly set to a different value to allow a reshape operation to move the data. Unfortunately when the 'data_offset' is explicitly set through sysfs, the new_data_offset is not also set, so the two would become out-of-sync incorrectly. One result of this is that trying to set the 'size' after the 'data_offset' would fail because it is not permitted to set the size when the 'data_offset' and 'new_data_offset' are different - as that can be confusing. Consequently when mdadm tried to do this while assembling an IMSM array it would fail. This bug was introduced in 3.5-rc1. Reported-by:
Brian Downing <bdowning@lavos.net> Bisected-by:
Brian Downing <bdowning@lavos.net> Tested-by:
Brian Downing <bdowning@lavos.net> Signed-off-by:
NeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fixes from Nicholas Bellinger: "This includes a bugfix from MDR to address a NULL pointer OOPs with FCoE aborts, along with a WRITE_SAME emulation bugfix for NOLB=0 cases, and persistent reservation return cleanups from Roland. All three patches are CC'ed to stable." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix range calculation in WRITE SAME emulation when num blocks == 0 target: Clean up returning errors in PR handling code tcm_fc: Fix crash seen with aborts and large reads
-
Olaf Hering authored
The referenced html file does not exist anymore. Replace the URL with the current project homepage. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yoichi Yuasa authored
Commit 37778088 ("bug.h: need linux/kernel.h for TAINT_WARN.") broke all MIPS builds: CC arch/mips/kernel/machine_kexec.o include/linux/log2.h: In function '__ilog2_u32': include/linux/log2.h:34:2: error: implicit declaration of function 'fls' [-Werror=implicit-function-declaration] include/linux/log2.h: In function '__ilog2_u64': include/linux/log2.h:42:2: error: implicit declaration of function 'fls64' [-Werror=implicit-function-declaration] ... Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Tested-by:
John Crispin <blogic@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <ddaney@caviumnetworks.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit a7a20d10 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d ("fix async probe regression"), so that same commit a7a20d10 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by:
Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull SELinux regression fixes from James Morris. Andrew Morton has a box that hit that open perms problem. I also renamed the "epollwakeup" selinux name for the new capability to be "block_suspend", to match the rename done by commit d9914cf6 ("PM: Rename CAP_EPOLLWAKEUP to CAP_BLOCK_SUSPEND"). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: SELinux: do not check open perms if they are not known to policy SELinux: include definition of new capabilities
-
Rustad, Mark D authored
This change eliminates an initialization-order hazard most recently seen when netprio_cgroup is built into the kernel. With thanks to Eric Dumazet for catching a bug. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
One more time/ntp fix pulled from Ingo Molnar. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Fix STA_INS/DEL clearing bug
-
Hans Verkuil authored
The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls(). This caused this ioctl to always return -ENOTTY. The cause for this was that for 3.5 two patch series were merged, one changing V4L2 core ioctl handling and one adding new functionality, and some of the new functionality wasn't handled by the new V4L2 core code. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> [ Taking it directly due to vacations - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes for SPEAr from Olof Johansson: "These are arriving very late in the release cycle, but there has been a change of maintainers on the SPEAr platform and they have needed a while to get going. The patch count is higher than I would like at this point, but they're all relevant fixes and well-contained in their own platform code. I still think it's suitable 3.5 material and I don't think it should increase the need for a -rc8 since they are so contained." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE ARM: dts: SPEAr320: Fix compatible string Clk: SPEAr1340: Update sys clock parent array clk: SPEAr1340: Fix clk enable register for uart1 and i2c1. ARM: SPEAr13xx: Fix Interrupt bindings Clk:spear6xx:Fix: Rename clk ids within predefined limit Clk:spear3xx:Fix: Rename clk ids within predefined limit clk:spear1310:Fix: Rename clk ids within predefined limit clk:spear1340:Fix: Rename clk ids within predefined limit
-
Anirban Chakraborty authored
Please apply. Thanks. Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: cifs: always update the inode cache with the results from a FIND_* cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps cifs: on CONFIG_HIGHMEM machines, limit the rsize/wsize to the kmap space Initialise mid_q_entry before putting it on the pending queue
-
Paul Moore authored
As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 18, 2012
-
-
Al Viro authored
Caused, AFAICS, by mismerge in commit ff9cb1c4 ("Merge branch 'for_linus' into for_linus_merged") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
http://git.stlinux.com/spear/linux-2.6Olof Johansson authored
* 'for-3.5-spear-fixes' of http://git.stlinux.com/spear/linux-2.6: ARM: SPEAr600: Fix timer interrupt definition in spear600.dtsi ARM: dts: SPEAr320: Boot the board in EXTENDED_MODE ARM: dts: SPEAr320: Fix compatible string Clk: SPEAr1340: Update sys clock parent array clk: SPEAr1340: Fix clk enable register for uart1 and i2c1. ARM: SPEAr13xx: Fix Interrupt bindings Clk:spear6xx:Fix: Rename clk ids within predefined limit Clk:spear3xx:Fix: Rename clk ids within predefined limit clk:spear1310:Fix: Rename clk ids within predefined limit clk:spear1340:Fix: Rename clk ids within predefined limit
-
Stefan Roese authored
Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
On spear320 device supported mode are: * AUTO_NET_SMII_MODE * AUTO_NET_MII_MODE * AUTO_EXP_MODE * SMALL_PRINTERS_MODE * EXTENDED_MODE spear320-evb board is designed for EXTENDED_MODE only, hence it does not boot correctly in current form where pinctrl part for some devices fail. Configure and boot the SPEAr320 evaluation board in EXTENDED_MODE. Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
sys_clk has multiple parents and selection of parent depends on sys_clk_ctrl register bit no. 23:25, with following possibilities 0XX: pll1_clk 10X: sys_synth_clk 110: pll2_clk 111: pll3_clk Out of several possibilities (h/w wise) to select same clock parent for sys_clk, current clock implementation was considering just one value. When bootloader programmed different (valid) value to select a clock parent then Linux breaks. Here, we try to include all possibilities which can lead to same clock selection thus making Linux independent of bootloader selection values. Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
This patch is to fix typing mistake of clk enable register of i2c1 and uart1. Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
- Correct interrupt bindings for uart, ethernet and pmu. - Added interrupt binding for keyboard. Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
-
Vipul Kumar Samar authored
The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk pll3_48m -> pll3_ Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de>
-
Vipul Kumar Samar authored
The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk ras_gen1_synth_gate_clk -> ras_syn1_gclk ras_pll3_48m -> ras_pll3_ pll3_48m -> pll3_ Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de>
-
Vipul Kumar Samar authored
The max limit of con_id is 16 and dev_id is 20. As of now for spear1310, many clk ids are exceeding this predefined limit. This patch is intended to rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk gmac_phy -> phy_ gmii_125m_pad -> gmii_pad Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de>
-
Vipul Kumar Samar authored
The max limit of con_id is 16 and dev_id is 20. As of now for spear1340, many clk ids are exceeding this predefined limit. This patch rename clk ids like: mux_clk -> _mclk gate_clk -> _gclk synth_clk -> syn_clk gmac_phy -> phy_ gmii_125m_pad_ -> gmii_pad Signed-off-by:
Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by:
Shiraz Hashim <shiraz.hashim@st.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de>
-
Dan Carpenter authored
Sparse complains about this because: drivers/block/rbd.c:996:20: warning: cast to restricted __le32 drivers/block/rbd.c:996:20: warning: cast from restricted __le16 These are set in osd_req_encode_op() and they are le16. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Alex Elder <elder@inktank.com> (cherry picked from commit 895cfcc8)
-
Yan, Zheng authored
ceph_snap_context->snaps is an u64 array Signed-off-by:
Zheng Yan <zheng.z.yan@intel.com> Reviewed-by:
Alex Elder <elder@inktank.com> (cherry picked from commit f9f9a190)
-
Sage Weil authored
In ancient times, the messenger could both initiate and accept connections. An artifact if that was data structures to store/process an incoming ceph_msg_connect request and send an outgoing ceph_msg_connect_reply. Sadly, the negotiation code was referencing those structures and ignoring important information (like the peer's connect_seq) from the correct ones. Among other things, this fixes tight reconnect loops where the server sends RETRY_SESSION and we (the client) retries with the same connect_seq as last time. This bug pretty easily triggered by injecting socket failures on the MDS and running some fs workload like workunits/direct_io/test_sync_io. Signed-off-by:
Sage Weil <sage@inktank.com>
-
Linus Torvalds authored
Merge Andrew's remaining patches for 3.5: "Nine fixes" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (9 commits) mm: fix lost kswapd wakeup in kswapd_stop() m32r: make memset() global for CONFIG_KERNEL_BZIP2=y m32r: add memcpy() for CONFIG_KERNEL_GZIP=y m32r: consistently use "suffix-$(...)" m32r: fix 'fix breakage from "m32r: use generic ptrace_resume code"' fallout m32r: fix pull clearing RESTORE_SIGMASK into block_sigmask() fallout m32r: remove duplicate definition of PTRACE_O_TRACESYSGOOD mn10300: fix "pull clearing RESTORE_SIGMASK into block_sigmask()" fallout bootmem: make ___alloc_bootmem_node_nopanic() really nopanic
-
Aaditya Kumar authored
Offlining memory may block forever, waiting for kswapd() to wake up because kswapd() does not check the event kthread->should_stop before sleeping. The proper pattern, from Documentation/memory-barriers.txt, is: --- waker --- event_indicated = 1; wake_up_process(event_daemon); --- sleeper --- for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); if (event_indicated) break; schedule(); } set_current_state() may be wrapped by: prepare_to_wait(); In the kswapd() case, event_indicated is kthread->should_stop. === offlining memory (waker) === kswapd_stop() kthread_stop() kthread->should_stop = 1 wake_up_process() wait_for_completion() === kswapd_try_to_sleep (sleeper) === kswapd_try_to_sleep() prepare_to_wait() . . schedule() . . finish_wait() The schedule() needs to be protected by a test of kthread->should_stop, which is wrapped by kthread_should_stop(). Reproducer: Do heavy file I/O in background. Do a memory offline/online in a tight loop Signed-off-by:
Aaditya Kumar <aaditya.kumar@ap.sony.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mel@csn.ul.ie> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Fix the m32r compile error: arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1 make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 by removing the static keyword. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Fix the m32r link error: LD arch/m32r/boot/compressed/vmlinux arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow': misc.c:(.text+0x190): undefined reference to `memcpy' misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy' make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1 by adding our own implementation of memcpy(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-