Pull media fixes from Mauro Carvalho Chehab:
 "A dvb core deadlock fix, a couple videobuf2 fixes an a series of media
  driver fixes"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (30 commits)
  [media] videobuf2-dma-sg: fix possible memory leak
  [media] vb2: regression fix: always set length field.
  [media] mt9p031: Include linux/of.h header
  [media] rtl2830: add parent for I2C adapter
  [media] media: marvell-ccic: use devm to release clk
  [media] ths7303: Declare as static a private function
  [media] em28xx-video: Swap release order to avoid lock nesting
  [media] usbtv: Add support for PAL video source
  [media] media_tree: Fix spelling errors
  [media] videobuf2: Add support for file access mode flags for DMABUF exporting
  [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning
  [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning
  [media] af9035: unlock on error in af9035_i2c_master_xfer()
  [media] af9033: fix broken I2C
  [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev
  [media] af9035: fix broken I2C and USB I/O
  [media] wm8775: fix broken audio routing
  [media] marvell-ccic: drop resource free in driver remove
  [media] tef6862/radio-tea5764: actually assign clamp result
  [media] cx231xx: use after free on error path in probe
  ...

Pull hwmon fix from Guenter Roeck:
 "Fix HIH-6130 driver to work with BeagleBone"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK

Pull hwmon fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Prevent some divide by zeros in FAN_TO_REG()
  hwmon: (w83l768ng) Fix fan speed control range
  hwmon: (w83l786ng) Fix fan speed control mode setting and reporting
  hwmon: (lm90) Unregister hwmon device if interrupt setup fails

Whilst architectures may be able to do better than this (which they can,
by simply defining their own macro), this is a generic stab at a
zero_bytemask implementation for the asm-generic, big-endian
word-at-a-time implementation.

On arm64, a clz instruction is used to implement the fls efficiently.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When explicitly hashing the end of a string with the word-at-a-time
interface, we have to be careful which end of the word we pick up.

On big-endian CPUs, the upper-bits will contain the data we're after, so
ensure we generate our masks accordingly (and avoid hashing whatever
random junk may have been sitting after the string).

This patch adds a new dcache helper, bytemask_from_count, which creates
a mask appropriate for the CPU endianness.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull iommu fixes from Alex Williamson:
 "arm/smmu driver updates via Will Deacon fixing locking around page
  table walks and a couple other issues"

* tag 'iommu-fixes-for-v3.13-rc4' of git://github.com/awilliam/linux-vfio:
  iommu/arm-smmu: fix error return code in arm_smmu_device_dt_probe()
  iommu/arm-smmu: remove potential NULL dereference on mapping path
  iommu/arm-smmu: use mutex instead of spinlock for locking page tables

Pull misc keyrings fixes from David Howells:
 "These break down into five sets:

   - A patch to error handling in the big_key type for huge payloads.
     If the payload is larger than the "low limit" and the backing store
     allocation fails, then big_key_instantiate() doesn't clear the
     payload pointers in the key, assuming them to have been previously
     cleared - but only one of them is.

     Unfortunately, the garbage collector still calls big_key_destroy()
     when sees one of the pointers with a weird value in it (and not
     NULL) which it then tries to clean up.

   - Three patches to fix the keyring type:

     * A patch to fix the hash function to correctly divide keyrings off
       from keys in the topology of the tree inside the associative
       array.  This is only a problem if searching through nested
       keyrings - and only if the hash function incorrectly puts the a
       keyring outside of the 0 branch of the root node.

     * A patch to fix keyrings' use of the associative array.  The
       __key_link_begin() function initially passes a NULL key pointer
       to assoc_array_insert() on the basis that it's holding a place in
       the tree whilst it does more allocation and stuff.

       This is only a problem when a node contains 16 keys that match at
       that level and we want to add an also matching 17th.  This should
       easily be manufactured with a keyring full of keyrings (without
       chucking any other sort of key into the mix) - except for (a)
       above which makes it on average adding the 65th keyring.

     * A patch to fix searching down through nested keyrings, where any
       keyring in the set has more than 16 keyrings and none of the
       first keyrings we look through has a match (before the tree
       iteration needs to step to a more distal node).

     Test in keyutils test suite:

        http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=8b4ae963ed92523aea18dfbb8cab3f4979e13bd1

   - A patch to fix the big_key type's use of a shmem file as its
     backing store causing audit messages and LSM check failures.  This
     is done by setting S_PRIVATE on the file to avoid LSM checks on the
     file (access to the shmem file goes through the keyctl() interface
     and so is gated by the LSM that way).

     This isn't normally a problem if a key is used by the context that
     generated it - and it's currently only used by libkrb5.

     Test in keyutils test suite:

        http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=d9a53cbab42c293962f2f78f7190253fc73bd32e

   - A patch to add a generated file to .gitignore.

   - A patch to fix the alignment of the system certificate data such
     that it it works on s390.  As I understand it, on the S390 arch,
     symbols must be 2-byte aligned because loading the address discards
     the least-significant bit"

* tag 'keys-devel-20131210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  KEYS: correct alignment of system_certificate_list content in assembly file
  Ignore generated file kernel/x509_certificate_list
  security: shmem: implement kernel private shmem inodes
  KEYS: Fix searching of nested keyrings
  KEYS: Fix multiple key add into associative array
  KEYS: Fix the keyring hash function
  KEYS: Pre-clear struct key on allocation

Pull xfs bugfixes from Ben Myers:

 - fix for buffer overrun in agfl with growfs on v4 superblock

 - return EINVAL if requested discard length is less than a block

 - fix possible memory corruption in xfs_attrlist_by_handle()

* tag 'xfs-for-linus-v3.13-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: growfs overruns AGFL buffer on V4 filesystems
  xfs: don't perform discard if the given range length is less than block size
  xfs: underflow bug in xfs_attrlist_by_handle()

When debugging the read-only hugepage case, I was confused by the fact
that get_futex_key() did an access_ok() only for the non-shared futex
case, since the user address checking really isn't in any way specific
to the private key handling.

Now, it turns out that the shared key handling does effectively do the
equivalent checks inside get_user_pages_fast() (it doesn't actually
check the address range on x86, but does check the page protections for
being a user page).  So it wasn't actually a bug, but the fact that we
treat the address differently for private and shared futexes threw me
for a loop.

Just move the check up, so that it gets done for both cases.  Also, use
the 'rw' parameter for the type, even if it doesn't actually matter any
more (it's a historical artifact of the old racy i386 "page faults from
kernel space don't check write protections").

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hugepage code had the exact same bug that regular pages had in
commit 7485d0d3 ("futexes: Remove rw parameter from
get_futex_key()").

The regular page case was fixed by commit 9ea71503 ("futex: Fix
regression with read only mappings"), but the transparent hugepage case
(added in a5b338f2

: "thp: update futex compound knowledge") case
remained broken.

Found by Dave Jones and his trinity tool.

Reported-and-tested-by: Dave Jones <davej@fedoraproject.org>
Cc: stable@kernel.org # v2.6.38+
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The "rpm * div" operations can overflow here, so this patch adds an
upper limit to rpm to prevent that.  Jean Delvare helped me with this
patch.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>

The wrong mask is used, which causes some fan speed control modes
(pwmX_enable) to be incorrectly reported, and some modes to be
impossible to set.

[JD: add subject and description.]

Signed-off-by: Brian Carnes <bmcarnes@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Commit 109b1283 (hwmon: (lm90) Add support to handle IRQ) introduced
interrupt support. Its error handling code fails to unregister the already
registered hwmon device.

Fixes: 109b1283


Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Some I2C bus drivers do not allow zero-length data transfers which are
required to start a measurement with the HIH6130/1 sensor. Nevertheless,
we can overcome this limitation by writing a zero dummy byte. This byte
is ignored by the sensor and was verified to be working with the OMAP
I2C bus driver in a BeagleBone board.

Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
[Guenter Roeck: Simplified complexity of write_length initialization]
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull watchdog fixes from Wim Van Sebroeck:
 "Drop the unnecessary miscdevice.h includes that we forgot in commit
  487722cf ("watchdog: Get rid of MODULE_ALIAS_MISCDEV statements")
  and fix an oops for the sc1200_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  sc1200_wdt: Fix oops
  watchdog: Drop unnecessary include of miscdevice.h

Pull AVR32 fixes from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: favr-32: clk_round_rate() can return a zero upon error
  avr32: remove deprecated IRQF_DISABLED
  cpufreq_ at32ap-cpufreq.c: Fix section mismatch
  avr32: pm: Fix section mismatch
  avr32: Kill CONFIG_MTD_PARTITIONS

Pull s390 fixes from Martin Schwidefsky:
 "One patch to increase the number of possible CPUs to 256, with the
  latest machine a single LPAR can have up to 101 CPUs.  Plus a number
  of bug fixes, the clock_gettime patch fixes a regression added in the
  3.13 merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/time,vdso: fix clock_gettime for CLOCK_MONOTONIC
  s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID
  s390/vdso: fix access-list entry initialization
  s390: increase CONFIG_NR_CPUS limit
  s390/smp,sclp: fix size of sclp_cpu_info structure
  s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early
  s390/dasd: fix memory leak caused by dangling references to request_queue

Apart from data-type specific alignment constraints, there are also
architecture-specific alignment requirements.
For example, on s390 symbols must be on even addresses implying a 2-byte
alignment.  If the system_certificate_list_end symbol is on an odd address
and if this address is loaded, the least-significant bit is ignored.  As a
result, the load_system_certificate_list() fails to load the certificates
because of a wrong certificate length calculation.

To be safe, align system_certificate_list on an 8-byte boundary.  Also improve
the length calculation of the system_certificate_list content.  Introduce a
system_certificate_list_size (8-byte aligned because of unsigned long) variable
that stores the length.  Let the linker calculate this size by introducing
a start and end label for the certificate content.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>

$ git status
# On branch pending-rebases
# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#	kernel/x509_certificate_list
nothing added to commit but untracked files present (use "git add" to track)
$

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>

This loop in xfs_growfs_data_private() is incorrect for V4
superblocks filesystems:

		for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++)
			agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK);

For V4 filesystems, we don't have a agfl header structure, and so
XFS_AGFL_SIZE() returns an entire sector's worth of entries, which
we then index from an offset into the sector. Hence: buffer overrun.

This problem was introduced in 3.10 by commit 77c95bba

 ("xfs: add
CRC checks to the AGFL") which changed the AGFL structure but failed
to update the growfs code to handle the different structures.

Fix it by using the correct offset into the buffer for both V4 and
V5 filesystems.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit b7d961b3)

For discard operation, we should return EINVAL if the given range length
is less than a block size, otherwise it will go through the file system
to discard data blocks as the end range might be evaluated to -1, e.g,
# fstrim -v -o 0 -l 100 /xfs7
/xfs7: 9811378176 bytes were trimmed

This issue can be triggered via xfstests/generic/288.

Also, it seems to get the request queue pointer via bdev_get_queue()
instead of the hard code pointer dereference is not a bad thing.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit f9fd0135)

If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.

This can only be triggered with CAP_SYS_ADMIN.

Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 071c529e)

If loaded with isapnp = 0 the driver explodes. This is catching
people out now and then. What should happen in the working case is
a complete mystery and the code appears terminally confused, but we
can at least make the error path work properly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991

After commit 487722cf

 (watchdog: Get rid of MODULE_ALIAS_MISCDEV
statements) the affected drivers no longer need to include miscdevice.h.
Only exception is rt2880_wdt.c which never needed it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Treat both negative and zero return values from clk_round_rate() as
errors.  This is needed since subsequent patches will convert
clk_round_rate()'s return value to be an unsigned type, rather than a
signed type, since some clock sources can generate rates higher than
(2^31)-1 Hz.

Eventually, when calling clk_round_rate(), only a return value of zero
will be considered a error.  All other values will be considered valid
rates.  The comparison against values less than 0 is kept to preserve
the correct behavior in the meantime.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Håvard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>

The function at32_cpufreq_driver_init was marked as __init but will be
called from inside the cpufreq framework. This lead to the following a
section mismatch during compilation:

WARNING: drivers/built-in.o(.data+0x2448): Section mismatch in reference
from the variable at32_driver to the function
.init.text:at32_cpufreq_driver_init()
The variable at32_driver references
the function __init at32_cpufreq_driver_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the
variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The power management has a section mismatch which leads to the following
warning during compilation:

WARNING: arch/avr32/mach-at32ap/built-in.o(.text+0x16d4): Section
mismatch in reference from the function avr32_pm_offset() to the
function .init.text:pm_exception()
The function avr32_pm_offset() references
the function __init pm_exception().

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>

This patch removes CONFIG_MTD_PARTITIONS in config files for avr32.
Because CONFIG_MTD_PARTITIONS was removed by commit
6a8a98b2

.

Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>

Fix the return when 'buf->pages' allocation error.

Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Commit dc77523c

 ensured that m.offset is
only set for the MMAP memory mode by calling __setup_offsets only for that
mode.

However, __setup_offsets also initializes the length fields, and that should
be done regardless of the memory mode. Because of that change the v4l2-ctl
test application fails for the USERPTR mode.

This fix creates a __setup_lengths function that sets the length, and
__setup_offsets just sets the offset and no longer touches the length.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a handful of powerpc fixes for 3.13.

  The patches are reasonably trivial and self contained.  Note the offb
  patches outside of arch/powerpc, they are LE fixes for our
  open-firmware 'dumb' framebuffer"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix up the kdump base cap to 128M
  powernv: Fix VFIO support with PHB3
  powerpc/52xx: Re-enable bestcomm driver in defconfigs
  powerpc/pasemi: Turn on devtmpfs in defconfig
  offb: Add palette hack for little endian
  offb: Little endian fixes
  powerpc: Fix PTE page address mismatch in pgtable ctor/dtor
  powerpc/44x: Fix ocm_block allocation
  powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node

The current logic sets the kdump base to min of 2G or ppc64_rma_size/2.
On PowerNV kernel the first memory block 'memory@0' can be very large,
equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on
PowerNV, kdump base is set to 512M resulting kdump to fail while allocating
paca array. This is because, paca need its memory from RMA region capped
at 256M (see allocate_pacas()).

This patch lowers the kdump base cap to 128M so that kdump kernel can
successfully get memory below 256M for paca allocation.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

I have recently found out that no iommu_groups could be found under
/sys/ on a P8. That prevents PCI passthrough from working.

During my investigation, I found out there seems to be a missing
iommu_register_group for PHB3. The following patch seems to fix the
problem. After applying it, I see iommu_groups under
/sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter,
which gives me a device at /dev/vfio/.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

At least some distros expect it these days; turn it on. Also, random
churn from doing a savedefconfig for the first time in a year or so.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The pseudo palette color entries need to be ajusted for little
endian.

This patch byteswaps the values in the pseudo palette depending
on the host endian order and the screen depth.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The "screen" properties : depth, width, height, linebytes need
to be converted to the host endian order when read from the device
tree.

The offb_init_palette_hacks() routine also made assumption on the
host endian order.

Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

In pte_alloc_one(), pgtable_page_ctor() is passed an address that has
not been converted by page_address() to the newly allocated PTE page.

When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor()
with an address to the PTE page that has been converted by page_address().
The mismatch in the PTE's page address causes pgtable_page_dtor() to access
invalid memory, so resources for that PTE (such as the page lock) is not
properly cleaned up.

On PPC32, only SMP kernels are affected.

On PPC64, only SMP kernels with 4K page size are affected.

This bug was introduced by commit d614bb04
"powerpc: Move the pte free routines from common header".

On a preempt-rt kernel, a spinlock is dynamically allocated for each
PTE in pgtable_page_ctor().  When the PTE is freed, calling
pgtable_page_dtor() with a mismatched page address causes a memory leak,
as the pointer to the PTE's spinlock is bogus.

On mainline, there isn't any immediately obvious symptoms, but the
problem still exists here.

Fixes: d614bb04

 "powerpc: Move the pte free routes from common header"
Cc: Paul Mackerras <paulus@samba.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-stable <stable@vger.kernel.org> # v3.10+
Signed-off-by: Hong H. Pham <hong.pham@windriver.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>