- Feb 17, 2016
-
-
Benjamin Tissoires authored
Allow to reuse the code in a later series and simplifies the reading of wacom_intuos_inout(). Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- Jan 19, 2016
-
-
Ping Cheng authored
INTUOSHT2 in range event is not used to indicate in proximity state. INTUOSHT2 only has one stylus. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Ping Cheng authored
stylus_in_proximity was introduced to support touch arbitration before in range was supported. With in range event, the logic changed. stylus_in_proximity should be set for both in prox and in range events. To finish a clean touch arbitration logic, we should send touch up (if it was down) before posting any general pen events. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Ping Cheng authored
Move general events related data validation to wacom_intuos_general. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Ping Cheng authored
Move wacom_intuos_schedule_prox_event inside wacom_intuos_general so we don't call it when general event data isn't ready. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- Jan 15, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - appoint Benjamin Tissoires as co-maintainer / designated reviewer - sysfs report_descriptor visibility fix for unclaimed devices, from Andy Lutomirski - suspend/resume fixes for Sony driver from Frank Praznik - IRQ deadlock fix from Ioan-Adrian Ratiu - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and Srinivas Pandruvada - a lot of new device support (especially, but not limited to, Wacom) and assorted small misc fixes - almost complete G920 support; the only bit that is missing is switching the device to HID mode automatically; Simon Wood and Michal Maly are working on it. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits) Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode" HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips HID: Add new PID for Microchip Pick16F1454 HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices HID: i2c-hid: Prevent sending reports from racing with device reset HID: use kobj_to_dev() HID: wiimote: use dev_to_wii() HID: add a new helper to_hid_driver() HID: use to_hid_device() HID: move to_hid_device() to hid.h HID: usbhid: use to_usb_device HID: corsair: Convert to use module_hid_driver HID: input: ignore the battery in OKLICK Laser BTmouse HID: wacom: Fix pad button range for CINTIQ_COMPANION_2 HID: wacom: Fix touchring value reporting HID: wacom: Report 'strip2' values in ABS_RY HID: wacom: Limit touchstrip data to 13 bits HID: wacom: bitwise vs logical ORs HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices HID: enable hid device to suspend/resume asynchronously ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fix a regression in the SunRPC socket polling code - Fix the attribute cache revalidation code - Fix race in __update_open_stateid() - Fix an lo->plh_block_lgets imbalance in layoutreturn - Fix an Oopsable typo in ff_mirror_match_fh() Features: - pNFS layout recall performance improvements. - pNFS/flexfiles: Support server-supplied layoutstats sampling period Bugfixes + cleanups: - NFSv4: Don't perform cached access checks before we've OPENed the file - Fix starvation issues with background flushes - Reclaim writes should be flushed as unstable writes if there are already entries in the commit lists - Various bugfixes from Chuck to fix NFS/RDMA send queue ordering problems - Ensure that we propagate fatal layoutget errors back to the application - Fixes for sundry flexfiles layoutstats bugs - Fix files/flexfiles to not cache invalidated layouts in the DS commit buckets" * tag 'nfs-for-4.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits) NFS: Fix a compile warning about unused variable in nfs_generic_pg_pgios() NFSv4: Fix a compile warning about no prototype for nfs4_ioctl() NFS: Use wait_on_atomic_t() for unlock after readahead SUNRPC: Fixup socket wait for memory NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid() NFSv4.1/pNFS: Fix a race in initiate_file_draining() NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn() NFS: Relax requirements in nfs_flush_incompatible NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid NFS: Allow multiple commit requests in flight per file NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs SUNRPC: Fix a missing break in rpc_anyaddr() pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh() NFS: Fix attribute cache revalidation NFS: Ensure we revalidate attributes before using execute_ok() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Don't put symlink bodies in pagecache into highmem" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Make sure that highmem pages are not added to symlink page cache
-
Al Viro authored
inode_nohighmem() is sufficient to make sure that page_get_link() won't try to allocate a highmem page. Moreover, it is sufficient to make sure that page_symlink/__page_symlink won't do the same thing. However, any filesystem that manually preseeds the symlink's page cache upon symlink(2) needs to make sure that the page it inserts there won't be a highmem one. Fortunately, only nfs and shmem have run afoul of that... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc changes: - fix lguest bug - fix /proc/meminfo output on certain configs - fix pvclock bug - fix reboot on certain iMacs by adding new reboot quirk - fix bootup crash - fix FPU boot line option parsing - add more x86 self-tests - small cleanups, documentation improvements, etc" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Remove an unneeded condition in srat_detect_node() x86/vdso/pvclock: Protect STABLE check with the seqcount x86/mm: Improve switch_mm() barrier comments selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[] lguest: Map switcher text R/O x86/boot: Hide local labels in verify_cpu() x86/fpu: Disable AVX when eagerfpu is off x86/fpu: Disable MPX when eagerfpu is off x86/fpu: Disable XGETBV1 when no XSAVE x86/fpu: Fix early FPU command-line parsing x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED selftests/x86: Disable the ldt_gdt_64 test for now x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output x86/boot: Double BOOT_HEAP_SIZE to 64KB x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Three clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/vt8500: Increase the minimum delta clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependency clocksource/drivers: Fix dependencies for !HAS_IOMEM archs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes, the biggest patch is one that decouples the kernel's list.h from tooling list.h" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf tools: Fallback to srcdir/Documentation/tips.txt perf ui/tui: Print helpline message as is perf tools: Set and pass DOCDIR to builtin-report.c perf tools: Add file_only config option to strlist perf tools: Add more usage tips perf record: Add --buildid-all option tools subcmd: Add missing NORETURN define for parse-options.h tools: Fix formatting of the "make -C tools" help message tools: Make list.h self-sufficient perf tools: Fix mmap2 event allocation in synthesize code perf stat: Fix recort_usage typo perf test: Reset err after using it hold errcode in hist testcases perf test: Fix false TEST_OK result for 'perf test hist' tools build: Add BPF feature check to test-all perf bpf: Fix build breakage due to libbpf tools: Move Makefile.arch from perf/config to tools/scripts perf tools: Fix PowerPC native building perf tools: Fix phony build target for build-test perf tools: Add -lutil in python lib list for broken python-config perf tools: Add missing sources to perf's MANIFEST ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Quite some driver updates: - piix4 can now handle multiplexed adapters - brcmstb, xlr, eg20t, designware drivers support more SoCs - emev2 gained i2c slave support - img-scb and rcar got bigger refactoring to remove issues - lots of common driver updates i2c core changes: - new quirk flag when an adapter does not support clock stretching, so clients can be configured to avoid that if possible - added a helper function to retrieve timing parameters from firmware (with rcar being the first user) - "multi-master" DT binding added so drivers can adapt to this setting (like disabling PM to keep arbitration working) - RuntimePM for the logical adapter device is now always enabled by the core to ensure propagation from childs to the parent (the HW device) - new macro builtin_i2c_driver to reduce boilerplate" * 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: create builtin_i2c_driver to avoid registration boilerplate i2c: imx: fix i2c resource leak with dma transfer dt-bindings: i2c: eeprom: add another EEPROM device dt-bindings: move I2C eeprom descriptions to the proper file i2c: designware: Do not require clock when SSCN and FFCN are provided DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115 i2c: s3c2410: remove superfluous runtime PM calls i2c: always enable RuntimePM for the adapter device i2c: designware: retry transfer on transient failure i2c: ibm_iic: rename i2c_timings struct due to clash with generic version i2c: designware: Add support for AMD Seattle I2C i2c: imx: Remove unneeded comments i2c: st: use to_platform_device() i2c: designware: use to_pci_dev() i2c: brcmstb: Adding support for CM and DSL SoCs i2c: mediatek: fix i2c multi transfer issue in high speed mode i2c: imx: improve code readability i2c: imx: Improve message log when DMA is not used i2c: imx: add runtime pm support to improve the performance i2c: imx: init bus recovery info before adding i2c adapter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree updates from Rob Herring: - Rework and export the changeset API to make it available to users other than DT overlays - ARM secure devices binding - OCTEON USB binding - Clean-up of various SRAM binding docs - Various other binding doc updates * tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) drivers/of: Export OF changeset functions Fix documentation for adp1653 DT ARM: psci: Fix indentation in DT bindings of/platform: export of_default_bus_match_table of/unittest: Show broken behaviour in the platform bus of: fix declaration of of_io_request_and_map of/address: replace printk(KERN_ERR ...) with pr_err(...) of/irq: optimize device node matching loop in of_irq_init() dt-bindings: tda998x: Document the required 'port' node. net/macb: bindings doc: Merge cdns-emac to macb dt-bindings: Misc fix for the ATH79 DDR controllers dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Documentation: dt: Add bindings for Secure-only devices dt-bindings: ARM: add arm,cortex-a72 compatible string ASoC: Atmel: ClassD: add GCK's parent clock in DT binding DT: add Olimex to vendor prefixes Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string Documentation/devicetree: document OCTEON USB bindings usb: misc: usb3503: Describe better how to bind clock to the hub dt-bindings: Consolidate SRAM bindings from all vendors ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Device Support: - Add support for s2mps15; sec-core - Add support for Lewisburg; lpc_ich - Add support for cs47l24 and wm1831; arizona New Functionality: - Allow user to select syscon register width; syscon Fix-ups: - Lots of Checkpatch fixes - Rename -pmic/-regulator; s2mps11 - Build driver components into a single module; wm8994-* - Better handing of IRQ during suspend/resume; as3722 - Constify things; da903x - Remove unused code; ab8500-core - Improve error handing; qcom_rpm - Simplify code: wm831x-otp, sta2x11-mfd - Improve locking; cros_ec_spi - Fix incorrect DT binding filename reference; arizona, palmas, snps-dwapb-gpio, wm8994 Bug Fixes: - Fix broken SYSFS 'show ID' call; wm831x-otp - Protect reads from non-existent registers; qcom-spmi-pmic - Repair build warnings; as3722 - Fix IRQ request ordering; arizona-irq - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb, htc-egpio, dm355evm_msp, asic3" * tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits) mfd: davinci_voicecodec: Remove pointless 'out of memory' error message mfd: da9052-irq: Fix trivial 'space before comma' error mfd: da9052-i2c: Fix tabbing/whitespace issue mfd: da903x: Fix white space and split string issues mfd: cs5535-mfd: Add missing line spacing and make local array static mfd: cros_ec_spi: Repair comparison ordering issue mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue. mfd: asic3: Fix a plethora of Checkpatch errors and warnings mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings mfd: arizona-i2c: Add blank line formatting after declaration mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead mfd: adp5520: Some trivial 'no space before tab' fixes mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting mfd: ab8500-core: Fix many warnings reported by Checkpatch mfd: ab2100-otp: Remove pointless 'out of memory' error message mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch mfd: aat2870-core: Remove unnecessary 'out of memory' message mfd: 88pm860x-core: Fix commenting and declaration spacing ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "I have mostly fixes in the power-supply tree for the 4.5 kernel. I should mention, that the top-most commit has not been in next, but it's a fix changing only a single register offset. Summary: - uncouple CONFIG_POWER_RESET from CONFIG_POWER_SUPPLY - misc fixes" * tag 'for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: bq27xxx_battery: Fix bq27541 AveragePower register address power: test_power: correctly handle empty writes power: generic-adc-battery: use to_delayed_work power: isp1704_charger: Fix isp1704_write() definition power: bq27xxx: fix register numbers of bq27500 power: bq27xxx: fix reading for bq27000 and bq27010 power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them power: bq27xxx_battery: Reorganize I2C into a module power: bq27xxx: don't fill system log by missing battery power: max8903_charger: set IRQF_ONESHOT if no primary handler is specified power/reset: at91-reset: add missing of_node_put power: ds2782_battery: constify ds278x_battery_ops structure power: bq2415x_charger: Delete unnecessary checks before the function call "of_node_put"
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: "Misc fixes" * tag 'hsi-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi_port: fix handling of_get_named_gpio result HSI: omap_ssi: fix handling ida_simple_get result HSI: Remove struct hsi_client private fields from kernel-doc
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: Fix-ups: - Take heed of GPIO default-on requests; gpio_backlight - Enable DT probing; tps65217_bl Bug Fixes: - Free resources in error path; pwm_bl - Fix uninitialised variable warning; adp8860_bl, adp8870_bl - Protect unconditional DT look-ups from non-DT platforms; pwm_bl - Fix backlight flicker; pwm_bl * tag 'backlight-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Free PWM requested by legacy API on error path backlight: adp8860: Fix another uninitialized variable use backlight: gpio-backlight: Use default-on on GPIO request backlight: pwm_bl: Fix broken PWM backlight for non-dt platforms backlight: tps65217_bl: Add MODULE_DEVICE_TABLE backlight: pwm_bl: Avoid backlight flicker when probed from DT backlight: adp88x0: Fix uninitialized variable use
-
- Jan 14, 2016
-
-
Jiri Kosina authored
Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', 'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
-
Dan Carpenter authored
Originally we calculated ht_nodeid as "ht_nodeid = apicid - boot_cpu_id;" so presumably it could be negative. But after commit: 01aaea1a ('x86: introduce initial apicid') we use c->initial_apicid which is an unsigned short and thus always >= 0. It causes a static checker warning to test for impossible conditions so let's remove it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Huang Rui <ray.huang@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Link: http://lkml.kernel.org/r/20160113123940.GE19993@mwanda Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!davinci_vc) { + dev_dbg(&pdev->dev, total: 0 errors, 1 warnings, 154 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
ERROR: space prohibited before that ',' (ctx:WxW) + da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052); total: 1 errors, 0 warnings, 290 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: suspect code indent for conditional statements (8, 24) + if (!i2c_safe_reg(reg)) + return regmap_read(da9052->regmap, total: 0 errors, 1 warnings, 226 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
While we're at it, let's also match the MODULE_LICENSE with the header. WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: quoted string split across lines +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); total: 0 errors, 3 warnings, 574 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Missing a blank line after declarations + struct resource *res; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); WARNING: char * array declaration might be better as static const + const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" }; total: 0 errors, 2 warnings, 192 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); total: 0 errors, 2 warnings, 731 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
ERROR: code indent should use tabs where possible + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no space before tabs + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no spaces at the start of a line + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ total: 1 errors, 2 warnings, 366 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
ERROR: Macros with complex values should be enclosed in parentheses +#define INIT_CDEX(_name, _rate) \ + [ASIC3_CLOCK_##_name] = { \ + .cdex = CLOCK_CDEX_##_name, \ + .rate = _rate, \ + } WARNING: line over 80 characters + ASIC3_GPIO_INT_STATUS); WARNING: void function return statements are not generally useful + return; +} WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: line over 80 characters + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p r_err(... to printk(KERN_ERR ... + printk(KERN_ERR "kzalloc failed\n"); WARNING: Possible unnecessary 'out of memory' message + if (asic == NULL) { + printk(KERN_ERR "kzalloc failed\n"); WARNING: Missing a blank line after declarations + int retval = 0; + retval = platform_driver_probe(&asic3_device_driver, asic3_probe); total: 1 errors, 13 warnings, 1081 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!pdata) { + dev_err(&client->dev, "Failed to allocate pdata\n"); WARNING: Possible unnecessary 'out of memory' message + if (!as3711) { + dev_err(&client->dev, "Memory allocation failed\n"); WARNING: line over 80 characters + dev_err(&client->dev, "regmap initialization failed: %d\n", ret); WARNING: line over 80 characters + /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); total: 0 errors, 8 warnings, 236 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Missing a blank line after declarations + struct arizona *arizona = dev_get_drvdata(&i2c->dev); + arizona_dev_exit(arizona); total: 0 errors, 1 warnings, 120 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(5); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); total: 0 errors, 4 warnings, 1407 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: please, no space before tabs +^I.id_table ^I= adp5520_id,$ total: 0 errors, 3 warnings, 365 lines checked Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: char * array declaration might be better as static const + static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO WARNING: quoted string split across lines + "Charger \"%s\" is connected with known battery." + " Rebooting.\n", WARNING: quoted string split across lines + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); total: 0 errors, 4 warnings, 199 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ib t*/ WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ WARNING: suspect code indent for conditional statements (16, 20) + if (!strcmp(name, dev_name(gpadc->dev))) + return gpadc; WARNING: suspect code indent for conditional statements (0, 16) +if (ad_value < 0) { + dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", WARNING: quoted string split across lines + dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" + " %d AD: 0x%x\n", channel, ad_value); WARNING: Missing a blank line after declarations + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(10); ERROR: else should follow close brace '}' + } + else WARNING: line over 80 characters + delay_max = 10000; /* large range to optimise sleep mode */ WARNING: line over 80 characters + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; WARNING: line over 80 characters + gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL); WARNING: Possible unnecessary 'out of memory' message + if (!gpadc) { + dev_err(&pdev->dev, "Error: No memory\n"); WARNING: space prohibited before semicolon + return ; WARNING: void function return statements are not generally useful + return ; +} WARNING: quoted string split across lines +MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," + "M'boumba Cedric Madianga"); total: 1 errors, 14 warnings, 1089 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Block comments use a trailing */ on a separate line + * */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 17)) + *offset = 24; WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 16)) + *offset = 25; WARNING: suspect code indent for conditional statements (8, 24) + if ((i == 3) && (*offset >= 24)) + *offset += 2; WARNING: ENOSYS means 'invalid syscall nr' and nothing else + return -ENOSYS; WARNING: static const char * array should probably be static const char * const + static const char *switch_off_status[] = { WARNING: static const char * array should probably be static const char * const + static const char *turn_on_status[] = { total: 0 errors, 9 warnings, 1867 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); total: 0 errors, 1 warnings, 250 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Missing a blank line after declarations + struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); + if (!ab3100->startup_events_read) WARNING: Possible unnecessary 'out of memory' message + if (!ab3100) { + dev_err(&client->dev, "could not allocate AB3100 device\n"); WARNING: else is not generally useful after a break or return + break; + } else { total: 0 errors, 3 warnings, 996 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!aat2870) { + dev_err(&client->dev, total: 0 errors, 1 warnings, 524 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
Checkpatch output: WARNING: Block comments use a trailing */ on a separate line + * - turn off */ WARNING: Missing a blank line after declarations + int ret; + ret = i2c_add_driver(&pm860x_driver); total: 0 errors, 2 warnings, 1283 lines checked Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-