- Dec 09, 2011
-
-
Tejun Heo authored
Now that all early memory information is in memblock when enabled, we can implement reverse free area iterator and use it to implement NUMA aware allocator which is then wrapped for simpler variants instead of the confusing and inefficient mending of information in separate NUMA aware allocator. Implement for_each_free_mem_range_reverse(), use it to reimplement memblock_find_in_range_node() which in turn is used by all allocators. The visible allocator interface is inconsistent and can probably use some cleanup too. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
Now all ARCH_POPULATES_NODE_MAP archs select HAVE_MEBLOCK_NODE_MAP - there's no user of early_node_map[] left. Kill early_node_map[] and replace ARCH_POPULATES_NODE_MAP with HAVE_MEMBLOCK_NODE_MAP. Also, relocate for_each_mem_pfn_range() and helper from mm.h to memblock.h as page_alloc.c would no longer host an alternative implementation. This change is ultimately one to one mapping and shouldn't cause any observable difference; however, after the recent changes, there are some functions which now would fit memblock.c better than page_alloc.c and dependency on HAVE_MEMBLOCK_NODE_MAP instead of HAVE_MEMBLOCK doesn't make much sense on some of them. Further cleanups for functions inside HAVE_MEMBLOCK_NODE_MAP in mm.h would be nice. -v2: Fix compile bug introduced by mis-spelling CONFIG_HAVE_MEMBLOCK_NODE_MAP to CONFIG_MEMBLOCK_HAVE_NODE_MAP in mmzone.h. Reported by Stephen Rothwell. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
Tejun Heo authored
score used early_node_map[] just to prime free_area_init_nodes(). Now memblock can be used for the same purpose and early_node_map[] is scheduled to be dropped. Use memblock instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com>
-
Tejun Heo authored
s390 used early_node_map[] just to prime free_area_init_nodes(). Now memblock can be used for the same purpose and early_node_map[] is scheduled to be dropped. Use memblock instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org
-
Tejun Heo authored
mips used early_node_map[] just to prime free_area_init_nodes(). Now memblock can be used for the same purpose and early_node_map[] is scheduled to be dropped. Use memblock instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-mips@linux-mips.org
-
Tejun Heo authored
ia64 used early_node_map[] just to prime free_area_init_nodes(). Now memblock can be used for the same purpose and early_node_map[] is scheduled to be dropped. Use memblock instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org
-
Tejun Heo authored
sh doesn't access early_node_map[] directly and enabling HAVE_MEMBLOCK_NODE_MAP is trivial - replacing add_active_range() calls with memblock_set_node() and selecting HAVE_MEMBLOCK_NODE_MAP is enough. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org
-
Tejun Heo authored
sparc doesn't access early_node_map[] directly and enabling HAVE_MEMBLOCK_NODE_MAP is trivial - replacing add_active_range() calls with memblock_set_node() and selecting HAVE_MEMBLOCK_NODE_MAP is enough. -v2: Use select in Kconfig instead as suggested by Sam Ravnborg. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: sparclinux@vger.kernel.org
-
Tejun Heo authored
powerpc doesn't access early_node_map[] directly and enabling HAVE_MEMBLOCK_NODE_MAP is trivial - replacing add_active_range() calls with memblock_set_node() and selecting HAVE_MEMBLOCK_NODE_MAP is enough. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
Implement memblock_add_node() which can add a new memblock memory region with specific node ID. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
The only function of memblock_analyze() is now allowing resize of memblock region arrays. Rename it to memblock_allow_resize() and update its users. * The following users remain the same other than renaming. arm/mm/init.c::arm_memblock_init() microblaze/kernel/prom.c::early_init_devtree() powerpc/kernel/prom.c::early_init_devtree() openrisc/kernel/prom.c::early_init_devtree() sh/mm/init.c::paging_init() sparc/mm/init_64.c::paging_init() unicore32/mm/init.c::uc32_memblock_init() * In the following users, analyze was used to update total size which is no longer necessary. powerpc/kernel/machine_kexec.c::reserve_crashkernel() powerpc/kernel/prom.c::early_init_devtree() powerpc/mm/init_32.c::MMU_init() powerpc/mm/tlb_nohash.c::__early_init_mmu() powerpc/platforms/ps3/mm.c::ps3_mm_add_memory() powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups() sh/kernel/machine_kexec.c::reserve_crashkernel() * x86/kernel/e820.c::memblock_x86_fill() was directly setting memblock_can_resize before populating memblock and calling analyze afterwards. Call memblock_allow_resize() before start populating. memblock_can_resize is now static inside memblock.c. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
Tejun Heo authored
Total size of memory regions was calculated by memblock_analyze() requiring explicitly calling the function between operations which can change memory regions and possible users of total size, which is cumbersome and fragile. This patch makes each memblock_type track total size automatically with minor modifications to memblock manipulation functions and remove requirements on calling memblock_analyze(). [__]memblock_dump_all() now also dumps the total size of reserved regions. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
* early_init_devtree(): Total memory size is aligned to PAGE_SIZE; however, alignment isn't enforced if memory_limit is explicitly specified. Simplify the logic and always apply PAGE_SIZE alignment. * MMU_init(): memblock regions is truncated by directly modifying memblock.memory.cnt. This is incomplete (reserved array is not truncated) and unnecessarily low level hindering further memblock improvments. Use memblock_enforce_memory_limit() instead. * wii_memory_fixups(): Unnecessarily low level direct manipulation of memblock regions. The same result can be achieved using properly abstracted operations. Reimplement using memblock API. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
With recent updates, the basic memblock operations are robust enough that there's no reason for memblock_enfore_memory_limit() to directly manipulate memblock region arrays. Reimplement it using __memblock_remove(). Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
Allow memblock users to specify range where @base + @size overflows and automatically cap it at maximum. This makes the interface more robust and specifying till-the-end-of-memory easier. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
__memblock_remove()'s open coded region manipulation can be trivially replaced with memblock_islate_range(). This increases code sharing and eases improving region tracking. This pulls memblock_isolate_range() out of HAVE_MEMBLOCK_NODE_MAP. Make it use memblock_get_region_node() instead of assuming rgn->nid is available. -v2: Fixed build failure on !HAVE_MEMBLOCK_NODE_MAP caused by direct rgn->nid access. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
memblock_set_node() operates in three steps - break regions crossing boundaries, set nid and merge back regions. This patch separates the first part into a separate function - memblock_isolate_range(), which breaks regions crossing range boundaries and returns range index range for regions properly contained in the specified memory range. This doesn't introduce any behavior change and will be used to further unify region handling. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
memblock_init() initializes arrays for regions and memblock itself; however, all these can be done with struct initializers and memblock_init() can be removed. This patch kills memblock_init() and initializes memblock with struct initializer. The only difference is that the first dummy entries don't have .nid set to MAX_NUMNODES initially. This doesn't cause any behavior difference. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
Tejun Heo authored
memblock no longer depends on having one more entry at the end during addition making the sentinel entries at the end of region arrays not too useful. Remove the sentinels. This eases further updates. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
Add __memblock_dump_all() which dumps memblock configuration whether memblock_debug is enabled or not. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
Make memblock_double_array(), __memblock_alloc_base() and memblock_alloc_nid() use memblock_reserve() instead of calling memblock_add_region() with reserved array directly. This eases debugging and updates to memblock_add_region(). Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
memblock_{add|remove|free|reserve}() return either 0 or -errno but had long as return type. Chage it to int. Also, drop 'extern' from all prototypes in memblock.h - they are unnecessary and used inconsistently (especially if mm.h is included in the picture). Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org>
-
Tejun Heo authored
24aa0788 (memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones) removed arch/x86/include/asm/memblock.h and dropped its inclusion from include/linux/memblock.h which breaks other architectures which depended on the generic memblock.h pulling in the arch specific one. However, the proper fix isn't adding back the asm inclusion. memblock doesn't have any arch dependent part and doesn't need arch specific header file and asm/memblock.h files are either practically empty or contain mostly unrelated arch specific stuff. * In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is either empty or just contains unused MEMBLOCK_DBG() macro. Remove them. * In arm and unicore32, asm/memblock.h contains arch specific stuff. Include it directly from its users. It might be a good idea to rename the header file to avoid confusion. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
"H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
-
- Nov 29, 2011
-
-
Tejun Heo authored
Conflicts & resolutions: * arch/x86/xen/setup.c dc91c728 "xen: allow extra memory to be in multiple regions" 24aa0788 "memblock, x86: Replace memblock_x86_reserve/free..." conflicted on xen_add_extra_mem() updates. The resolution is trivial as the latter just want to replace memblock_x86_reserve_range() with memblock_reserve(). * drivers/pci/intel-iommu.c 166e9278 "x86/ia64: intel-iommu: move to drivers/iommu/" 5dfe8660 "bootmem: Replace work_with_active_regions() with..." conflicted as the former moved the file under drivers/iommu/. Resolved by applying the chnages from the latter on the moved file. * mm/Kconfig 66616720 "memblock: add NO_BOOTMEM config symbol" c378ddd5 "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option" conflicted trivially. Both added config options. Just letting both add their own options resolves the conflict. * mm/memblock.c d1f0ece6 "mm/memblock.c: small function definition fixes" ed7b56a7 "memblock: Remove memblock_memory_can_coalesce()" confliected. The former updates function removed by the latter. Resolution is trivial. Signed-off-by:
Tejun Heo <tj@kernel.org>
-
- Nov 28, 2011
-
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
* 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6: viafb: correct sync polarity for OLPC DCON video:da8xx-fb: Disable and reset sequence on version2 of LCDC OMAPDSS: DISPC: skip scaling calculations when not scaling OMAPFB: fix compilation warnings due to missing include OMAPDSS: HDMI: fix returned HDMI pixel clock
-
Rafael J. Wysocki authored
Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8 ("ath9k_hw: Add support for AR946/8x chipsets") that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Nov 27, 2011
-
-
Andy Whitcroft authored
Fix build failure in staging iio driver: .../drivers/staging/iio/industrialio-core.c: In function 'iio_event_getfd': .../drivers/staging/iio/industrialio-core.c:262:32: error: 'ev_int' undeclared (first use in this function) Also convert the rest of the function to use the new variable. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/44x: Add mtd ndfc to the ppx44x defconfig powerpc: Fix compiliation with hugetlbfs enabled arch/powerpc/sysdev/ehv_pic.c: add missing kfree powerpc/fsl-lbc: Fix for fsl_upm drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac powerpc/qe: Fixup QE_General4 errata powerpc/85xx: Fix compile error on p3060_qds.c powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO' powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe
-
- Nov 26, 2011
-
-
git://github.com/herbertx/cryptoLinus Torvalds authored
* git://github.com/herbertx/crypto: crypto: mv_cesa - fix hashing of chunks > 1920 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericssonLinus Torvalds authored
* 'gpio-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: gpio: pca953x: Staticise pca953x_get_altdata()
-
- Nov 25, 2011
-
-
Tony Breeds authored
Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Acked-by:
Josh Boyer <jwboyer@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kumar Gala authored
arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- Nov 24, 2011
-
-
Julia Lawall authored
At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Alexandre Rusev authored
If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by:
Alexandre Rusev <arusev@dev.rtsoft.ru> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Shaohui Xie authored
compatible in dts has been changed, so the driver needs to be updated accordingly. Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Joakim Tjernlund authored
QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Paul Bolle authored
The driver for the Freescale P3060 QDS got added by commit 96cc017c ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Roy Zang authored
P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by:
Roy Zang <tie-fei.zang@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Linus Torvalds authored
-