- Jun 18, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED fixes from Jacek Anaszewski: - Fix brightness setting upon hardware blinking enabled - Handle suspend/resume in heartbeat trigger * tag 'for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: handle suspend/resume in heartbeat trigger leds: core: Fix brightness setting upon hardware blinking enabled
-
- Jun 17, 2016
-
-
Linus Torvalds authored
Merge tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "These changes fix a bit of fallout from the introduction of the atomic API" * tag 'pwm/for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: atmel-hlcdc: Fix default PWM polarity pwm: sysfs: Get return value from pwm_apply_state() pwm: Improve args checking in pwm_apply_state()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: - miscellaneous fixes for MIPS and s390 - one new kvm_stat for s390 - correctly disable VT-d posted interrupts with the rest of posted interrupts - "make randconfig" fix for x86 AMD - off-by-one in irq route check (the "good" kind that errors out a bit too early!) * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: check apicv is active before using VT-d posted interrupt kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APIC kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid() MIPS: KVM: Fix CACHE triggered exception emulation MIPS: KVM: Don't unwind PC when emulating CACHE MIPS: KVM: Include bit 31 in segment matches MIPS: KVM: Fix modular KVM under QEMU KVM: s390: Add stats for PEI events KVM: s390: ignore IBC if zero
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfixes from Bruce Fields: "Oleg Drokin found and fixed races in the nfsd4 state code that go back to the big nfs4_lock_state removal around 3.17 (but that were also probably hard to reproduce before client changes in 3.20 allowed the client to perform parallel opens). Also fix a 4.1 backchannel crash due to rpc multipath changes in 4.6. Trond acked the client-side rpc fixes going through my tree" * tag 'nfsd-4.7-1' of git://linux-nfs.org/~bfields/linux: nfsd: Make init_open_stateid() a bit more whole nfsd: Extend the mutex holding region around in nfsd4_process_open2() nfsd: Always lock state exclusively. rpc: share one xps between all backchannels nfsd4/rpc: move backchannel create logic into rpc code SUNRPC: fix xprt leak on xps allocation failure nfsd: Fix NFSD_MDS_PR_KEY on 32-bit by adding ULL postfix
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fixes from Miklos Szeredi: "This contains two regression fixes: one for the xattr API update and one for using the mounter's creds in file creation in overlayfs. There's also a fix for a bug in handling hard linked AF_UNIX sockets that's been there from day one. This fix is overlayfs only despite the fact that it touches code outside the overlay filesystem: d_real() is an identity function for all except overlay dentries" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix uid/gid when creating over whiteout ovl: xattr filter fix af_unix: fix hard linked sockets on overlay vfs: add d_real_inode() helper
-
Dan Carpenter authored
If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jun 16, 2016
-
-
Yang Zhang authored
VT-d posted interrupt is relying on the CPU side's posted interrupt. Need to check whether VCPU's APICv is active before enabing VT-d posted interrupt. Fixes: d62caabb Cc: stable@vger.kernel.org Signed-off-by:
Yang Zhang <yang.zhang.wz@gmail.com> Signed-off-by:
Shengge Ding <shengge.dsg@alibaba-inc.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Xiubo Li authored
These days, we experienced one guest crash with 8 cores and 3 disks, with qemu error logs as bellow: qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984: kvm_irqchip_commit_routes: Assertion `ret == 0' failed. And then we found one patch(bdf026317d) in qemu tree, which said could fix this bug. Execute the following script will reproduce the BUG quickly: irq_affinity.sh ======================================================================== vda_irq_num=25 vdb_irq_num=27 while [ 1 ] do for irq in {1,2,4,8,10,20,40,80} do echo $irq > /proc/irq/$vda_irq_num/smp_affinity echo $irq > /proc/irq/$vdb_irq_num/smp_affinity dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct done done ======================================================================== The following qemu log is added in the qemu code and is displayed when this bug reproduced: kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024, irq_routes->nr: 1024, gsi_count: 1024. That's to say when irq_routes->nr == 1024, there are 1024 routing entries, but in the kernel code when routes->nr >= 1024, will just return -EINVAL; The nr is the number of the routing entries which is in of [1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1]. This patch fix the BUG above. Cc: stable@vger.kernel.org Signed-off-by:
Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by:
Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by:
Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "The main drm fixes pull for rc4: one regression fix in the connector refcounting, and an MST fix. There rest is nouveau, amdkfd, i915, etnaviv, and radeon/amdgpu fixes, mostly regression or black screen fixes" * tag 'drm-fixes-for-v4.7-rc4' of git://people.freedesktop.org/~airlied/linux: (23 commits) drm/etnaviv: initialize iommu domain page size drm/nouveau/iccsense: fix memory leak drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64" drm/amd/powerplay: select samu dpm 0 as boot level on polaris. drm/amd/powerplay: update powerplay table parsing drm/dp/mst: Always clear proposed vcpi table for port. drm/crtc: only store the necessary data for set_config rollback drm/crtc: fix connector reference counting mismatch in drm_crtc_helper_set_config drm/i915/ilk: Don't disable SSC source if it's in use Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" drm/amdgpu/gfx7: fix broken condition check drm/radeon: fix asic initialization for virtualized environments amdgpu: fix asic initialization for virtualized environments (v2) drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled drm/radeon: do not hard reset GPU while freezing on r600/r700 family drm/i915: Extract physical display dimensions from VBT drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV drm/i915: Only ignore eDP ports that are connected drm/i915: Silence "unexpected child device config size" for VBT on 845g drm/i915: Fix NULL pointer deference when out of PLLs in IVB ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Minor kconfig dependency cleanup, trivial mic mute hotkey for ideapad, and a needed improvement in adaptive keyboard detection for thinkpad: platform/x86: - Drop duplicate dependencies on X86 thinkpad_acpi: - Add support for HKEY version 0x200 ideapad_laptop: - Add an event for mic mute hotkey" * tag 'platform-drivers-x86-v4.7-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: Drop duplicate dependencies on X86 thinkpad_acpi: Add support for HKEY version 0x200 ideapad_laptop: Add an event for mic mute hotkey
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI fixes from Richard Weinberger: "This contains fixes for a regression introduced in rc1" * tag 'upstream-4.7-rc4' of git://git.infradead.org/linux-ubifs: ubi: Don't bypass ->getattr() Revert "mtd: switch open_mtd_by_chdev() to use of vfs_stat()" Revert "mtd: switch ubi_open_volume_path() to vfs_stat()"
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull ipmi bugfix from Corey Minyard: "Fix a fairly significant ipmi list bug This bug could cause lists to be corrupted" * tag 'for-linus-4.7-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()
-
Oleg Drokin authored
Move the state selection logic inside from the caller, always making it return correct stp to use. Signed-off-by:
J . Bruce Fields <bfields@fieldses.org> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Oleg Drokin authored
To avoid racing entry into nfs4_get_vfs_file(). Make init_open_stateid() return with locked stateid to be unlocked by the caller. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Oleg Drokin authored
It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio docs and tests from Michael Tsirkin: "This merely has some documentation and a new test, seems safe to merge" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add noring tool tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu tools/virtio/ringtest: add usage example to README MAINTAINERS: Add file patterns for virtio device tree bindings
-
Shuah Khan authored
Updating email addresses in MAINTAINERS and .mailmap files. Cc: stable@vger.kernel.org Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mauro Carvalho Chehab authored
For the third time in three years, I'm changing my e-mail at Samsung. That's bad, as it may stop communications with me for a while. So, this time, I'll also add the mchehab@kernel.org e-mail, as it remains stable since ever. Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
radeon and amdgpu fixes for 4.7. Highlights: - fixes for GPU VM passthrough - fixes for powerplay on Polaris GPUs - pll fixes for rs780/880 * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: select samu dpm 0 as boot level on polaris. drm/amd/powerplay: update powerplay table parsing Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" drm/amdgpu/gfx7: fix broken condition check drm/radeon: fix asic initialization for virtualized environments amdgpu: fix asic initialization for virtualized environments (v2) drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled drm/radeon: do not hard reset GPU while freezing on r600/r700 family
-
Suravee Suthikulpanit authored
Add logic to disable AVIC #ifndef CONFIG_X86_LOCAL_APIC. Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Suravee Suthikulpanit authored
The commit 8221c137 ("svm: Manage vcpu load/unload when enable AVIC") introduces a build error due to implicit function declaration when #ifdef CONFIG_X86_32 and #ifndef CONFIG_X86_LOCAL_APIC (as reported by Kbuild test robot i386-randconfig-x0-06121009). So, this patch introduces kvm_cpu_get_apicid() wrapper around __default_cpu_present_to_apicid() with additional handling if CONFIG_X86_LOCAL_APIC is not defined. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: commit 8221c137 ("svm: Manage vcpu load/unload when enable AVIC") Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://git.pengutronix.de/git/lst/linuxDave Airlie authored
just a single fix for a regression introduced by IOMMU API changes in v4.7. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: initialize iommu domain page size
-
- Jun 15, 2016
-
-
J. Bruce Fields authored
The spec allows backchannels for multiple clients to share the same tcp connection. When that happens, we need to use the same xprt for all of them. Similarly, we need the same xps. This fixes list corruption introduced by the multipath code. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Trond Myklebust <trondmy@primarydata.com>
-
J. Bruce Fields authored
Also simplify the logic a bit. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Trond Myklebust <trondmy@primarydata.com>
-
J. Bruce Fields authored
Callers of rpc_create_xprt expect it to put the xprt on success and failure. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Trond Myklebust <trondmy@primarydata.com>
-
Miklos Szeredi authored
Fix a regression when creating a file over a whiteout. The new file/directory needs to use the current fsuid/fsgid, not the ones from the mounter's credentials. The refcounting is a bit tricky: prepare_creds() sets an original refcount, override_creds() gets one more, which revert_cred() drops. So 1) we need to expicitly put the mounter's credentials when overriding with the updated one 2) we need to put the original ref to the updated creds (and this can safely be done before revert_creds(), since we'll still have the ref from override_creds()). Reported-by:
Stephen Smalley <sds@tycho.nsa.gov> Fixes: 3fe6e52f ("ovl: override creds with the ones from the superblock mounter") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com>
-
Lucas Stach authored
Since d16e0faa (iommu: Allow selecting page sizes per domain) the iommu core demands the page size to be set per domain, otherwise any mapping attempts will be dropped. Make sure to set a valid page size for the etnaviv iommu. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de>
-
git://github.com/skeggsb/linuxDave Airlie authored
* 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau/iccsense: fix memory leak drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Robin Murphy authored
This reverts commit 1733a2ad . There is apparently something amiss with the way the TTM code handles DMA buffers, which the above commit was attempting to work around for arm64 systems with non-coherent PCI. Unfortunately, this completely breaks systems *with* coherent PCI (which appear to be the majority). Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on a machine with a PCI GPU having coherent dma_map_ops (in this case a 7600GT card plugged into an ARM Juno board) results in a fatal crash: [ 2.803438] nouveau 0000:06:00.0: DRM: allocated 1024x768 fb: 0x9000, bo ffffffc976141c00 [ 2.897662] Unable to handle kernel NULL pointer dereference at virtual address 000001ac [ 2.897666] pgd = ffffff8008e00000 [ 2.897675] [000001ac] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000 [ 2.897680] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 2.897685] Modules linked in: [ 2.897692] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5+ #543 [ 2.897694] Hardware name: ARM Juno development board (r1) (DT) [ 2.897699] task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 [ 2.897711] PC is at __memcpy+0x7c/0x180 [ 2.897719] LR is at OUT_RINGp+0x34/0x70 [ 2.897724] pc : [<ffffff80083465fc>] lr : [<ffffff800854248c>] pstate: 80000045 [ 2.897726] sp : ffffffc9768ab360 [ 2.897732] x29: ffffffc9768ab360 x28: 0000000000000001 [ 2.897738] x27: ffffffc97624c000 x26: 0000000000000000 [ 2.897744] x25: 0000000000000080 x24: 0000000000006c00 [ 2.897749] x23: 0000000000000005 x22: ffffffc97624c010 [ 2.897755] x21: 0000000000000004 x20: 0000000000000004 [ 2.897761] x19: ffffffc9763da000 x18: ffffffc976b2491c [ 2.897766] x17: 0000000000000007 x16: 0000000000000006 [ 2.897771] x15: 0000000000000001 x14: 0000000000000001 [ 2.897777] x13: 0000000000e31b70 x12: ffffffc9768a0080 [ 2.897783] x11: 0000000000000000 x10: fffffffffffffb00 [ 2.897788] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.897793] x7 : 0000000000000000 x6 : 00000000000001ac [ 2.897799] x5 : 00000000ffffffff x4 : 0000000000000000 [ 2.897804] x3 : 0000000000000010 x2 : 0000000000000010 [ 2.897810] x1 : ffffffc97624c010 x0 : 00000000000001ac ... [ 2.898494] Call trace: [ 2.898499] Exception stack(0xffffffc9768ab1a0 to 0xffffffc9768ab2c0) [ 2.898506] b1a0: ffffffc9763da000 0000000000000004 ffffffc9768ab360 ffffff80083465fc [ 2.898513] b1c0: ffffffc976801e00 ffffffc9762b8000 ffffffc9768ab1f0 ffffff80080ec158 [ 2.898520] b1e0: ffffffc9768ab230 ffffff8008496d04 ffffffc975ce6d80 ffffffc9768ab36e [ 2.898527] b200: ffffffc9768ab36f ffffffc9768ab29d ffffffc9768ab29e ffffffc9768a0000 [ 2.898533] b220: ffffffc9768ab250 ffffff80080e70c0 ffffffc9768ab270 ffffff8008496e44 [ 2.898540] b240: 00000000000001ac ffffffc97624c010 0000000000000010 0000000000000010 [ 2.898546] b260: 0000000000000000 00000000ffffffff 00000000000001ac 0000000000000000 [ 2.898552] b280: 0000000000000000 0000000000000000 fffffffffffffb00 0000000000000000 [ 2.898558] b2a0: ffffffc9768a0080 0000000000e31b70 0000000000000001 0000000000000001 [ 2.898566] [<ffffff80083465fc>] __memcpy+0x7c/0x180 [ 2.898574] [<ffffff800853e164>] nv04_fbcon_imageblit+0x1d4/0x2e8 [ 2.898582] [<ffffff800853d6d0>] nouveau_fbcon_imageblit+0xd8/0xe0 [ 2.898591] [<ffffff80083c4db4>] soft_cursor+0x154/0x1d8 [ 2.898598] [<ffffff80083c47b4>] bit_cursor+0x4fc/0x538 [ 2.898605] [<ffffff80083c0cfc>] fbcon_cursor+0x134/0x1a8 [ 2.898613] [<ffffff800841c280>] hide_cursor+0x38/0xa0 [ 2.898620] [<ffffff800841d420>] redraw_screen+0x120/0x228 [ 2.898628] [<ffffff80083bf268>] fbcon_prepare_logo+0x370/0x3f8 [ 2.898635] [<ffffff80083bf640>] fbcon_init+0x350/0x560 [ 2.898641] [<ffffff800841c634>] visual_init+0xac/0x108 [ 2.898648] [<ffffff800841df14>] do_bind_con_driver+0x1c4/0x3a8 [ 2.898655] [<ffffff800841e4f4>] do_take_over_console+0x174/0x1e8 [ 2.898662] [<ffffff80083bf8c4>] do_fbcon_takeover+0x74/0x100 [ 2.898669] [<ffffff80083c3e44>] fbcon_event_notify+0x8cc/0x920 [ 2.898680] [<ffffff80080d7e38>] notifier_call_chain+0x50/0x90 [ 2.898685] [<ffffff80080d8214>] __blocking_notifier_call_chain+0x4c/0x90 [ 2.898691] [<ffffff80080d826c>] blocking_notifier_call_chain+0x14/0x20 [ 2.898696] [<ffffff80083c5e1c>] fb_notifier_call_chain+0x1c/0x28 [ 2.898703] [<ffffff80083c81ac>] register_framebuffer+0x1cc/0x2e0 [ 2.898712] [<ffffff800845da80>] drm_fb_helper_initial_config+0x288/0x3e8 [ 2.898719] [<ffffff800853da20>] nouveau_fbcon_init+0xe0/0x118 [ 2.898727] [<ffffff800852d2f8>] nouveau_drm_load+0x268/0x890 [ 2.898734] [<ffffff8008466e24>] drm_dev_register+0xbc/0xc8 [ 2.898740] [<ffffff8008468a88>] drm_get_pci_dev+0xa0/0x180 [ 2.898747] [<ffffff800852cb28>] nouveau_drm_probe+0x1a0/0x1e0 [ 2.898755] [<ffffff80083a32e0>] pci_device_probe+0x98/0x110 [ 2.898763] [<ffffff800858e434>] driver_probe_device+0x204/0x2b0 [ 2.898770] [<ffffff800858e58c>] __driver_attach+0xac/0xb0 [ 2.898777] [<ffffff800858c3e0>] bus_for_each_dev+0x60/0xa0 [ 2.898783] [<ffffff800858dbc0>] driver_attach+0x20/0x28 [ 2.898789] [<ffffff800858d7b0>] bus_add_driver+0x1d0/0x238 [ 2.898796] [<ffffff800858ed50>] driver_register+0x60/0xf8 [ 2.898802] [<ffffff80083a20dc>] __pci_register_driver+0x3c/0x48 [ 2.898809] [<ffffff8008468eb4>] drm_pci_init+0xf4/0x120 [ 2.898818] [<ffffff8008c56fc0>] nouveau_drm_init+0x21c/0x230 [ 2.898825] [<ffffff80080829d4>] do_one_initcall+0x8c/0x190 [ 2.898832] [<ffffff8008c31af4>] kernel_init_freeable+0x14c/0x1f0 [ 2.898839] [<ffffff80088a0c20>] kernel_init+0x10/0x100 [ 2.898845] [<ffffff8008085e10>] ret_from_fork+0x10/0x40 [ 2.898853] Code: a88120c7 a8c12027 a88120c7 a8c12027 (a88120c7) [ 2.898871] ---[ end trace d5713dcad023ee04 ]--- [ 2.898888] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b In a toss-up between the GPU seeing stale data artefacts on some systems vs. catastrophic kernel crashes on other systems, the latter would seem to take precedence, so revert this change until the real underlying problem can be fixed. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Alexandre Courbot <acourbot@nvidia.com> [acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/] Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
Rex Zhu authored
Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
to handle pptable format change on Polaris boards Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Andrey Grodzovsky authored
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e46 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com>
-
Philipp Zabel authored
drm_crtc_helper_set_config only potentially touches connector->encoder and encoder->crtc, so we only have to store those for all connectors and encoders, respectively. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Philipp Zabel authored
Since commit 0955c125 ("drm/crtc: take references to connectors used in a modeset. (v2)"), the reference counts of all connectors in the drm_mode_set given to drm_crtc_helper_set_config are incremented, and then the reference counts of all connectors are decremented on success, but in a temporary copy of the connector structure. This leads to the following error after the first modeset on imx-drm: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = ad8c4000 [00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657 Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>] lr : [<80252e94>] psr: 200c0013 sp : adca7ca8 ip : adca7b90 fp : adca7cd4 r10: 00000000 r9 : 00000100 r8 : 00000200 r7 : af3c9800 r6 : aded7848 r5 : aded7800 r4 : 00000000 r3 : af3ca058 r2 : 00000200 r1 : af3ca058 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3d8c404a DAC: 00000051 Process kmsfb-manage (pid: 190, stack limit = 0xadca6210) Stack: (0xadca7ca8 to 0xadca8000) 7ca0: 805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c 7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800 7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08 7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28 7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500 7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800 7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290 7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940 7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003 7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0 7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08 7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018 7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f 7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878 7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30 7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80 7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc 7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990 7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000 7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80 7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548 7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8 7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc 7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018 7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d Backtrace: [<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28) r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820 r4:aded7800 r3:805190e0 [<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c) r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4) r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800 [<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4) r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18 r4:ae77fcc0 [<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c) r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50 [<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc) r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051 r4:adca7e50 [<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0) r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0 r4:7ebd5630 [<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c) r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630 r4:adfe3b81 [<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c) r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004) ---[ end trace 9a7257572ccacb16 ]--- Only the reference count of connectors that weren't previously bound to an encoder should be incremented after a call to drm_crtc_helper_set_config. And only the reference count of connectors that were previously bound to an encoder and are unbound afterwards should ever be decremented. The reference counts of the temporary copies in the save_connectors should not be touched at all. This patch fixes the above error by only incrementing the reference count of those connectors in the set that are initially not bound to any encoder, and also by restoring the reference count of only those connectors in the set in the failure case. "Note that this can only be hit when fbdev emulation is disabled, since then the refcount drops from 1 to 0 and we call the connector destroy functions on the backup copy, which eventually results in tears. With fbdev emulation the refcount only goes down from 2 to 1 ever. And since we unconditionally increment the refcount on the real object, the refcount of that will slowly increase. The backup connector's refcount doesn't matter, since we kfree() that either way in the end of drm_crtc_helper_set_config()." Fixes: 0955c125 ("drm/crtc: take references to connectors used in a modeset. (v2)") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
"Pretty much all regression fixes, or black screens." * tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/ilk: Don't disable SSC source if it's in use drm/i915: Extract physical display dimensions from VBT drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV drm/i915: Only ignore eDP ports that are connected drm/i915: Silence "unexpected child device config size" for VBT on 845g drm/i915: Fix NULL pointer deference when out of PLLs in IVB
-
Lyude authored
Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- Jun 14, 2016
-
-
Geert Uytterhoeven authored
On 32-bit: fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’: fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’: fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix this. Fixes: f99d4fbd ("nfsd: add SCSI layout support") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Paolo Bonzini authored
Merge MIPS patches destined to both 4.7 and kvm/next, to avoid unnecessary conflicts. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
James Hogan authored
When emulating TLB miss / invalid exceptions during CACHE instruction emulation, be sure to set up the correct PC and host_cp0_badvaddr state for the kvm_mips_emlulate_tlb*_ld() function to pick up for guest EPC and BadVAddr. PC needs to be rewound otherwise the guest EPC will end up pointing at the next instruction after the faulting CACHE instruction. host_cp0_badvaddr must be set because guest CACHE instructions trap with a Coprocessor Unusable exception, which doesn't update the host BadVAddr as a TLB exception would. This doesn't tend to get hit when dynamic translation of emulated instructions is enabled, since only the first execution of each CACHE instruction actually goes through this code path, with subsequent executions hitting the SYNCI instruction that it gets replaced with. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-