- Apr 22, 2017
-
-
Matthew Whitehead authored
Constants used for tuning are generally a bad idea, especially as hardware changes over time. Replace the constant 2 jiffies with sysctl variable netdev_budget_usecs to enable sysadmins to tune the softirq processing. Also document the variable. For example, a very fast machine might tune this to 1000 microseconds, while my regression testing 486DX-25 needs it to be 4000 microseconds on a nearly idle network to prevent time_squeeze from being incremented. Version 2: changed jiffies to microseconds for predictable units. Signed-off-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Craig Gallek says: ==================== ip_tunnel: Allow policy-based routing through tunnels iproute2 changes to follow. Example usage: ip link add gre-test type gre local 10.0.0.1 remote 10.0.0.2 fwmark 0x4 ip -detail link show gre-test ... ip link set gre-test type gre fwmark 0 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Craig Gallek authored
This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 21, 2017
-
-
Florian Fainelli authored
tag_lan9303.c does check for a NULL dst but that's already checked by dsa_switch_rcv() one layer above. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Juergen Borleis <jbe@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The labels were out of order, so it either could result in an Oops or a leak. Fixes: 48935bbb ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We've got the number of longs, yes, but we should multiply by sizeof(long) to get the number of bytes needed. Fixes: e4917d46 ("qede: Add aRFS support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chema Gonzalez authored
Signed-off-by:
Chema Gonzalez <chemag@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-04-18 This series contains updates to mainly ixgbe with only one ixgbevf change. Usha adds a check to ensure the creation of number of VF's is valid based on the traffic classes configured, all to avoid transmit hangs. Joe Perches reduces the use of pr_cont since the output can be interleaved by other processes. Tony cleans up the code overwriting the KX4 config, which is configured by the NVM. Adds a check for MMNGC.MNG_VETO, to resolve an issue where we were getting a link loss for the BMC when loading the driver. Don fixes up SGMII x553 config details which were missed in earlier implementations. Added support for x552 XFI backplane interface support. Cleaned up an unused define, which was causing confusion on supported devices. Emil fixes a link issue on KR parts by making sure the default setting is set. Refactors the code so that the code for allocating memory for the list of MAC addresses that the VFs can use into its own function. Made some code cleans to help readability and ensure notification of SRIOV being enabled is done upon completion. Fixed an issue where if we failed to allocate vfinfo in __ixgbe_enable_sriov() the driver would crash with a NULL pointer dereference. Philippe Reynes updates ixgbevf to use the new API for {get|set}_link_ksettings. Alex increases the headroom allocation when using build_skb() on a system with 4K pages. Fixed an issue in ixgbe_dump() where we were no longer clearing the status bit. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
David Ahern reported that 5425077d ("net: ipv6: Add early demux handler for UDP unicast") breaks udp_l3mdev_accept=0 since early demux for IPv6 UDP was doing a generic socket lookup which does not require an exact match. Fix this by making UDPv6 early demux match connected sockets only. v1->v2: Take reference to socket after match as suggested by Eric v2->v3: Add comment before break Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast") Reported-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Tested-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: address two poll() flakes Some packetdrill tests are failing when host kernel is using ASAN or other debugging infrastructure. I was able to fix the flakes by making sure we were not sending wakeup events too soon. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When using TCP FastOpen for an active session, we send one wakeup event from tcp_finish_connect(), right before the data eventually contained in the received SYNACK is queued to sk->sk_receive_queue. This means that depending on machine load or luck, poll() users might receive POLLOUT events instead of POLLIN|POLLOUT To fix this, we need to move the call to sk->sk_state_change() after the (optional) call to tcp_rcv_fastopen_synack() Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When a RST packet is processed, we send two wakeup events to interested polling users. First one by a sk->sk_error_report(sk) from tcp_reset(), followed by a sk->sk_state_change(sk) from tcp_done(). Depending on machine load and luck, poll() can either return POLLERR, or POLLIN|POLLOUT|POLLERR|POLLHUP (this happens on 99 % of the cases) This is probably fine, but we can avoid the confusion by reordering things so that we have more TCP fields updated before the first wakeup. This might even allow us to remove some barriers we added in the past. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Allow flow based forwarding in OVS This patchset does some fixes so the HW is setup correctly to do flow-based (ACL based) forwarding for OVS-enslaved port. The first patch is just trivial fix spotted on the way. Patches 2-4 take care of proper FID setup which HW needs in order to for ACL based forwarding. The 7th patch (with dependency of patch 5 and 6) takes care of proper setup of ports that are enslaved in OVS. The last patch implements new FID miss trap that is used to push packets belonging to unknown flows to kernel and userspace. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When there is no FID set for a specific packet, the HW will drop it. However, by default these packets are useful to be delivered to CPU as it can inspect them and program HW accordingly. So add this trap. This would only ever happen when port is enslaved to an OVS master. Otherwise, packets would be dropped during VLAN / STP filtering, before FID classification. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
>From now on, a port can become a slave of OVS master. All vlans are enabled, STP state is set to "forwarding". It is up to the OVS userspace daemon to setup the flows either in kernel or in HW using TC flower offload. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
To find out if a netdev is an OVS port. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
So far, mlxsw_sp_port_vlan_set range is limited by MLXSW_REG_SPVM_REC_MAX_COUNT. In spectrum_switchdev code this is wrapped up by a helper function which actually does multiple calls to FW for bigger ranges. Move the code into mlxsw_sp_port_vlan_set and use it always. That allows caller not to care about the range. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
HW requires the FID to be valid in order for the forward action to work. So regardless of the current FID validity, just set the dummy FID which would do the trick. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
For forwarding using ACL action, HW needs a valid FID to be setup. It does not actually use it, so it can be any valid FID. So create a dummy FID only for this purpose. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Implement part of multipurpose Virtual Router and Forwarding Domain Action that takes care of setting up FID. We need to use it to be able to forward packets using ACL action when no FID is associated on RX. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Niklas Cassel authored
The hardware has a LPI interrupt. There is already code in the stmmac driver to parse and handle the interrupt. However, this information was missing from the DT binding. At the same time, improve the description of the existing interrupts. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Acked-By:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
struct sock_filter_ext didn't make it into the tree and is now called struct bpf_insn. Reword the kerneldoc comment for bpf_convert_filter() accordingly. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2017-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== My last pull request has been a while, we now have: * connection quality monitoring with multiple thresholds * support for FILS shared key authentication offload * pre-CAC regulatory compliance - only ETSI allows this * sanity check for some rate confusion that hit ChromeOS (but nobody else uses it, evidently) * some documentation updates * lots of cleanups ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Juergen Borleis says: ==================== net: dsa: add SMSC/Microchip LAN9303 three port ethernet switch driver The LAN9303 is a three port 10/100 ethernet switch with integrated phys for the two external ethernet ports. The third port is an RMII/MII interface to a host master network interface (e.g. fixed link). While the LAN9303 device itself supports offload packet processing, this driver does not make use of it yet. This driver just configures the device to provide two separate network interfaces (which is the default state of a DSA device). Please note: the "MDIO managed mode" driver part isn't tested yet. I have used and tested the "I2C managed mode" only. Changes in v6: - fix support to use the driver as a module (core, i2c and mdio) - license info added in all parts of the driver (for module support) Changes in v5: - add missing include file to 'net/dsa/tag_lan9303.c' Changes in v4: - rebased on net-next, 'net/dsa/tag_lan9303.c' adapted to changed API Changes in v3: - 'ds_to_lan9303()' removed - special PHY reg MII_LAN911X_SPECIAL_CONTROL_STATUS mapping removed - compatible strings for I2C and MDIO are now different - MDIO-managed-mode devicetree binding added (still compile time tested only) Changes in v2: - code moved to 'drivers/net/dsa' - timeouts in completion wait loops - macros instead of various magic numbers - development code removed - devicetree property names changed - devicetree example adapted - tried to avoid to mix 'switching' and 'forwarding'... Comments are welcome. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Juergen Beisert authored
When the LAN9303 device is in MDIO manged mode, all register accesses must be done via MDIO. Please note: this code is compile time tested only due to the absence of such configured hardware. It is based on a patch from Stefan Roese from 2014. Signed-off-by:
Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com CC: sr@denx.de Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Juergen Beisert authored
In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by:
Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Juergen Beisert authored
The SMSC/Microchip LAN9303 is an ethernet switch device with one CPU port and two external ethernet ports with built-in phys. This driver uses the DSA framework, but is currently only capable of separating the two external ports. There is no offload support yet. Signed-off-by:
Juergen Borleis <jbe@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Juergen Beisert authored
To define the outgoing port and to discover the incoming port a regular VLAN tag is used by the LAN9303. But its VID meaning is 'special'. This tag handler/filter depends on some hardware features which must be enabled in the device to provide and make use of this special VLAN tag to control the destination and the source of an ethernet packet. Signed-off-by:
Juergen Borleis <jbe@pengutronix.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Thelen authored
gcc 4.8.4 complains that mlx4_SW2HW_MPT_wrapper() uses an uninitialized 'mpt' variable: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_MPT_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2802:12: warning: 'mpt' may be used uninitialized in this function [-Wmaybe-uninitialized] mpt->mtt = mtt; I think this warning is a false complaint. mpt is only used when mr_res_start_move_to() return zero, and in all such cases it initializes mpt. But apparently gcc cannot see that. Initialize mpt to avoid the warning. Signed-off-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 20, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 19, 2017
-
-
Sergei Shtylyov authored
The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea ("ravb: unmap descriptors when freeing rings"). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
I just found that when we had changed the Rx path to check for length instead of the DD bit we introduced an issue in ixgbe_dump since we were no longer clearing the status bits. To correct this I am updating ixgbe_dump to look for the length bits in the descriptor since that is what we are using in the Rx path. Fixes: c3630cc4 ("ixgbe: Use length to determine if descriptor is done") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Two Sparc bug fixes from Daniel Jordan and Nitin Gupta" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix hugepage page table free sparc64: Use LOCKDEP_SMALL, not PROVE_LOCKING_SMALL
-
Alexander Duyck authored
This patch increases the headroom allocated when using build_skb on a system with 4K pages. Specifically the breakdown of headroom versus cache size is as follows: L1 Cache Size Headroom 64 192 64, NET_IP_ALIGN == 2 194 128 128 128, NET_IP_ALIGN == 2 130 256 512 256, NET_IP_ALIGN == 2 258 I stopped at supporting only a cache line size of 256 as that was the largest cache size I could find supported in the kernel. With this we are guaranteeing at least 128 bytes of headroom to spare in the frame. This should be enough for us to insert a couple of IPv6 headers if needed which is likely enough room for anything XDP should need. I'm leaving the padding for systems with pages larger than 4K unmodified for now. XDP currently isn't really setup to work on those types of systems so we can cross that bridge when we get there. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
We did not have a check in place for MMNGC.MNG_VETO when setting up link on X550EM_X KR devices which resulted in link loss for the BMC when loading the driver. This patch adds a check for ixgbe_check_reset_blocked() in setup_link() since in that case there is no PHY reset function. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-