- Apr 10, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs fixes from Mike Marshall: "Orangefs cleanups and a strncpy vulnerability fix. Cleanups: - remove an unused variable from orangefs_readdir. - clean up printk wrapper used for ofs "gossip" debugging. - clean up truncate ctime and mtime setting in inode.c - remove a useless null check found by coccinelle. - optimize some memcpy/memset boilerplate code. - remove some useless sanity checks from xattr.c Fix: - fix a potential strncpy vulnerability" * tag 'for-linus-4.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove unused variable orangefs: Add KERN_<LEVEL> to gossip_<level> macros orangefs: strncpy -> strscpy orangefs: clean up truncate ctime and mtime setting Orangefs: fix ifnullfree.cocci warnings Orangefs: optimize boilerplate code. Orangefs: xattr.c cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - compile-time fixes (warnings and failures) - a bug in iommu core code which could cause the group->domain pointer to be falsly cleared - fix in scatterlist handling of the ARM common DMA-API code - stall detection fix for the Rockchip IOMMU driver * tag 'iommu-fixes-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Silence an uninitialized variable warning iommu/rockchip: Fix "is stall active" check iommu: Don't overwrite domain pointer when there is no default_domain iommu/dma: Restore scatterlist offsets correctly iommu: provide of_xlate pointer unconditionally
-
- Apr 09, 2016
-
-
Martin Brandenburg authored
Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Joe Perches authored
Emit the logging messages at the appropriate levels. Miscellanea: o Change format to fmt o Use the more common ##__VA_ARGS__ Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Martin Brandenburg authored
It would have been possible for a rogue client-core to send in a symlink target which is not NUL terminated. This returns EIO if the client-core gives us corrupt data. Leave debugfs and superblock code as is for now. Other dcache.c and namei.c strncpy instances are safe because ORANGEFS_NAME_MAX = NAME_MAX + 1; there is always enough space for a name plus a NUL byte. Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Martin Brandenburg authored
The ctime and mtime are always updated on a successful ftruncate and only updated on a successful truncate where the size changed. We handle the ``if the size changed'' bit. This matches FUSE's behavior. Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
kbuild test robot authored
fs/orangefs/orangefs-debugfs.c:130:2-26: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Mike Marshall authored
Suggested by David Binderman <dcb314@hotmail.com> The former can potentially be a performance win over the latter. memcpy(d, s, len); memset(d+len, c, size-len); memset(d, c, size); memcpy(d, s, len); Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
Mike Marshall authored
1. It is nonsense to test for negative size_t, suggested by David Binderman <dcb314@hotmail.com> 2. By the time Orangefs gets called, the vfs has ensured that name != NULL, and that buffer and size are sane. Signed-off-by:
Mike Marshall <hubcap@omnibond.com>
-
- Apr 08, 2016
-
-
Bart Van Assche authored
This reverts commit 0fd10721 . That patch causes the ib_srpt driver to crash as soon as the first SCSI command is received: kernel BUG at drivers/infiniband/ulp/srpt/ib_srpt.c:1439! invalid opcode: 0000 [#1] SMP Workqueue: target_completion target_complete_ok_work [target_core_mod] RIP: srpt_queue_response+0x437/0x4a0 [ib_srpt] Call Trace: srpt_queue_data_in+0x9/0x10 [ib_srpt] target_complete_ok_work+0x152/0x2b0 [target_core_mod] process_one_work+0x197/0x480 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x22/0x40 Aside from the crash, the shortcomings of that patch are as follows: - It makes the ib_srpt driver use I/O contexts allocated by transport_alloc_session_tags() but it does not initialize these I/O contexts properly. All the initializations performed by srpt_alloc_ioctx() are skipped. - It swaps the order of the send ioctx allocation and the transition to RTR mode which is wrong. - The amount of memory that is needed for I/O contexts is doubled. - srpt_rdma_ch.free_list is no longer used but is not removed. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfixes from Ted Ts'o: "These changes contains a fix for overlayfs interacting with some (badly behaved) dentry code in various file systems. These have been reviewed by Al and the respective file system mtinainers and are going through the ext4 tree for convenience. This also has a few ext4 encryption bug fixes that were discovered in Android testing (yes, we will need to get these sync'ed up with the fs/crypto code; I'll take care of that). It also has some bug fixes and a change to ignore the legacy quota options to allow for xfstests regression testing of ext4's internal quota feature and to be more consistent with how xfs handles this case" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: ignore quota mount options if the quota feature is enabled ext4 crypto: fix some error handling ext4: avoid calling dquot_get_next_id() if quota is not enabled ext4: retry block allocation for failed DIO and DAX writes ext4: add lockdep annotations for i_data_sem ext4: allow readdir()'s of large empty directories to be interrupted btrfs: fix crash/invalid memory access on fsync when using overlayfs ext4 crypto: use dget_parent() in ext4_d_revalidate() ext4: use file_dentry() ext4: use dget_parent() in ext4_file_open() nfs: use file_dentry() fs: add file_dentry() ext4 crypto: don't let data integrity writebacks fail with ENOMEM ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fix from Sage Weil: "This just fixes a few remaining memory allocations in RBD to use GFP_NOIO instead of GFP_ATOMIC" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use GFP_NOIO consistently for request allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/qemu fixes from Michael S Tsirkin: "A couple of fixes for virtio and for the new QEMU fw cfg driver" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bit MAINTAINERS: add entry for QEMU firmware: qemu_fw_cfg.c: hold ACPI global lock during device access virtio: virtio 1.0 cs04 spec compliance for reset qemu_fw_cfg: don't leak kobj on init error
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is mostly amdgpu/radeon fixes, and imx related fixes. There is also one one TTM fix, one nouveau fix, and one hdlcd fix. The AMD ones are some fixes for power management after suspend/resume one some GPUs, and some vblank fixes. The IMX ones are for more stricter plane checks and some cleanups. I'm off until Monday, so therre might be some fixes early next week if anyone missed me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/nouveau/tegra: acquire and enable reference clock if needed drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm: ARM HDLCD - fix an error code drm: ARM HDLCD - get rid of devm_clk_put() drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. ...
-
- Apr 07, 2016
-
-
Dan Carpenter authored
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
John Keeping authored
Since commit cd6438c5 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by:
John Keeping <john@metanate.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: stable@vger.kernel.org # v4.4+ Fixes: 1228236d ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Stefan Hajnoczi authored
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the device status bit in the uapi header file so that both the kernel and userspace applications can use it. The bit is currently unused by the virtio guest drivers and vhost. According to the spec "a good implementation will try to recover by issuing a reset". This is not attempted here because it requires auditing the virtio drivers to ensure there are no resource leaks or crashes if the device needs to be reset mid-operation. See "2.1 Device Status Field" in the VIRTIO 1.0 specification for details. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Michael S. Tsirkin authored
Gabriel merged support for QEMU FW CFG interface, but there's apparently no official maintainer. It's also possible that this will grow more interfaces in future. I'll happily co-maintain it and handle pull requests together with the rest of the PV stuff I maintain. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Gabriel Somlo <somlo@cmu.edu>
-
Gabriel Somlo authored
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Gabriel Somlo <somlo@cmu.edu> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Michael S. Tsirkin authored
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com>
-
Michael S. Tsirkin authored
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Gabriel Somlo <somlo@cmu.edu>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Lots of misc bug fixes for radeon and amdgpu and one for ttm. - fix vram info fetching on Fiji and unposted boards - additional vblank fixes from the conversion to drm_vblank_on/off - UVD dGPU suspend and resume fixes - lots of powerplay fixes - fix a fence leak in the pageflip code - ttm fix for platforms where CPU is 32 bit, but physical addresses are >32bits * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. drm/amd/powerplay: notify amdgpu whether dpm is enabled or not. drm/amdgpu: Not support disable dpm in powerplay. drm/amdgpu: add an cgs interface to notify amdgpu the dpm state. ...
-
Linus Torvalds authored
Let's see if anybody even notices. I doubt anybody uses this, and it does expose addresses that should be randomized, so let's just remove the code. It's old and traditional, and it used to be cute, but we should have removed this long ago. If it turns out anybody notices and this breaks something, we'll have to revert this, and maybe we'll end up using other approaches instead (using %pK or similar). But removing unnecessary code is always the preferred option. Noted-by:
Emrah Demir <ed@abdsec.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "I'm back from PTO. These issues cropped up while I was gone and are simple fixes. I'll have more after I've caught up, but I wanted to get these in quick. Two minor fixes for 4.6-rc2: - Fix mlx5 build error when on demand paging is not enabled - Fix possible uninit variable in new i40iw driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: i40iw: avoid potential uninitialized variable use IB/mlx5: fix VFs callback function prototypes
-
- Apr 06, 2016
-
-
Arnd Bergmann authored
gcc finds that the i40iw_make_cm_node() function in the recently added i40iw driver uses an uninitilized variable as an index into an array if CONFIG_IPV6 is disabled and the driver uses IPv6 mode: drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node': drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized] ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr); As far as I can tell, this code path can not be used because the ipv4 variable is always set with CONFIG_IPV6 is disabled, but it's better to be sure and prevent the undefined behavior, as well as shut up that warning in a proper way. This adds an 'else' clause for the case we get the warning about, causing the function to return an error in a controlled way. To avoid adding extra mess with combined io()/#ifdef clauses, I'm also converting the existing #ifdef into a more readable if(IS_ENABLED()) check. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: f27b4746 ("i40iw: add connection management code") Acked-by:
Mustafa Ismail <Mustafa.ismail@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Arnd Bergmann authored
The previous patch that added a couple of callback functions put the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING, which causes the build to fail if that option is disabled: drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add': drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function) This moves the four declarations below the #ifdef section so they are always available. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: eff901d3 ("IB/mlx5: Implement callbacks for manipulating VFs") Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
git://github.com/skeggsb/linuxDave Airlie authored
Just a single fix to prevent GM20B systems hanging at boot. * 'linux-4.6' of git://github.com/skeggsb/linux: drm/nouveau/tegra: acquire and enable reference clock if needed
-
Alexandre Courbot authored
GM20B requires an extra clock compared to GK20A. Add that information into the platform data and acquire and enable this clock if necessary. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
git://linux-arm.org/linux-ldDave Airlie authored
arm hdlcd fix. * 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld: drm: ARM HDLCD - fix an error code drm: ARM HDLCD - get rid of devm_clk_put()
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm: stricter plane parameter checking, dw_hdmi-imx and dmfc fixes - Check whether plane parameters comply with IPU IDMAC limitations and fix planar YUV 4:2:0 U/V offsets and stride - Cleanup encoder in dw_hdmi-imx bind error path and remove a superfluous platform_set_drvdata in dw_hdmi-imx - DMFC setup fixes: lock the ipu_dmfc_init_channel function against concurrent use, rename it to ipu_dmfc_config_wait4eot, and call it after the FIFO size has been determined. * tag 'imx-drm-next-2016-04-01' of git://git.pengutronix.de/git/pza/linux: drm/imx: Don't set a gamma table size drm/imx: ipuv3-plane: Configure DMFC wait4eot bit after slots are determined gpu: ipu-v3: ipu-dmfc: Rename ipu_dmfc_init_channel to ipu_dmfc_config_wait4eot gpu: ipu-v3: ipu-dmfc: Make function ipu_dmfc_init_channel() return void gpu: ipu-v3: ipu-dmfc: Protect function ipu_dmfc_init_channel() with mutex drm/imx: dw_hdmi: Don't call platform_set_drvdata() drm/imx: dw_hdmi: Call drm_encoder_cleanup() in error path drm/imx: ipuv3-plane: fix planar YUV 4:2:0 support drm/imx: ipuv3-plane: Add more thorough checks for plane parameter limitations gpu: ipu-cpmem: modify ipu_cpmem_set_yuv_planar_full for better control
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Miscellaneous bugfixes. The ARM and s390 fixes are for new regressions from the merge window, others are usual stable material" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: compiler-gcc: disable -ftracer for __noclone functions kvm: x86: make lapic hrtimer pinned s390/mm/kvm: fix mis-merge in gmap handling kvm: set page dirty only if page has been writable KVM: x86: reduce default value of halt_poll_ns parameter KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabled KVM: x86: Inject pending interrupt even if pending nmi exist arm64: KVM: Register CPU notifiers when the kernel runs at HYP arm64: kvm: 4.6-rc1: Fix VTCR_EL2 VS setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of driver specific fixes here that came in since the merge window plus one core fix for locking in cases where a client driver grabs a lock on the whole bus for an extended series of operations that was introduced by the changes to support accelerated flash operations" * tag 'spi-fix-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: rockchip: fix probe deferral handling spi: omap2-mcspi: fix dma transfer for vmalloced buffer spi: fix possible deadlock between internal bus locks and bus_lock_flag spi: imx: Fix possible NULL pointer deref spi: imx: only do necessary changes to ECSPIx_CONFIGREG spi: rockchip: Spelling s/divsor/divisor/
-
David Disseldorp authored
As of 5a60e876 , RBD object request allocations are made via rbd_obj_request_create() with GFP_NOIO. However, subsequent OSD request allocations in rbd_osd_req_create*() use GFP_ATOMIC. With heavy page cache usage (e.g. OSDs running on same host as krbd client), rbd_osd_req_create() order-1 GFP_ATOMIC allocations have been observed to fail, where direct reclaim would have allowed GFP_NOIO allocations to succeed. Cc: stable@vger.kernel.org # 3.18+ Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Chunming Zhou authored
Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com>
-
- Apr 05, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Here is a set of pin control fixes for the v4.6 series. A bit bigger than what I hoped for, but all fixes are confined to drivers, a few of them also targeted to stable. Summary: - On Super-H PFC (Renesas) controllers: only use dummies on legacy systems. This fixes a serious ethernet regression on a Renesas board. - Pistachio: Fix errors in the pin table. - Allwinner SunXi: fix the external interrupts to work. - Intel: fix so the high level interrupts start working, and fix a spurious interrupt issue. - Qualcomm ipq4019: fix the number of GPIOs provided (bump to 100), correct register offsets and handle GPIO mode properly. - Revert the revert on the revert so that Xway has a .to_irq() callback again. - Minor fixes to errorpaths and debug info. - A MAINTAINERS update" * tag 'pinctrl-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"" pinctrl: qcom: ipq4019: fix register offsets pinctrl: qcom: ipq4019: fix the function enum for gpio mode pinctrl: qcom: ipq4019: set ngpios to correct value pinctrl: nomadik: fix pull debug print inversion MAINTAINERS: pinctrl: samsung: Add two new maintainers pinctrl: intel: implement gpio_irq_enable pinctrl: intel: make the high level interrupt working pinctrl: freescale: imx: fix bogus check of of_iomap() return value pinctrl: sunxi: Fix A33 external interrupts not working pinctrl: pistachio: fix mfio84-89 function description and pinmux. pinctrl: sh-pfc: only use dummy states for non-DT platforms
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Some bug fixes on au0828 and snd-usb-audio: - the au0828+snd-usb-audio MC patch broke several things and produced some race conditions. Better to revert the patches, and re-work on them for a next version - fix a regression at tuner disable links logic - properly handle dev_state as a bitmask" * tag 'media/v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Revert "[media] media: au0828 change to use Managed Media Controller API" [media] Revert "[media] sound/usb: Use Media Controller API to share media resources" [media] au0828: Fix dev_state handling [media] au0828: fix au0828_v4l2_close() dev_state race condition [media] media: au0828 fix to clear enable/disable/change source handlers [media] v4l2-mc: cleanup a warning [media] au0828: disable tuner links and cache tuner/decoder
-
Robin Murphy authored
With the change to stashing just the IOVA-page-aligned remainder of the CPU-page offset rather than the whole thing, the failure path in __invalidate_sg() also needs tweaking to account for that in the case of differing page sizes where the two offsets may not be equivalent. Similarly in __finalise_sg(), lest the architecture-specific wrappers later get the wrong address for cache maintenance on sync or unmap. Fixes: 164afb1d ("iommu/dma: Use correct offset in map_sg") Reported-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Cc: stable@ver.kernel.org # v4.4+ Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Paolo Bonzini authored
-ftracer can duplicate asm blocks causing compilation to fail in noclone functions. For example, KVM declares a global variable in an asm like asm("2: ... \n .pushsection data \n .global vmx_return \n vmx_return: .long 2b"); and -ftracer causes a double declaration. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: stable@vger.kernel.org Cc: kvm@vger.kernel.org Reported-by:
Linda Walsh <lkml@tlinx.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luiz Capitulino authored
When a vCPU runs on a nohz_full core, the hrtimer used by the lapic emulation code can be migrated to another core. When this happens, it's possible to observe milisecond latency when delivering timer IRQs to KVM guests. The huge latency is mainly due to the fact that apic_timer_fn() expects to run during a kvm exit. It sets KVM_REQ_PENDING_TIMER and let it be handled on kvm entry. However, if the timer fires on a different core, we have to wait until the next kvm exit for the guest to see KVM_REQ_PENDING_TIMER set. This problem became visible after commit 9642d18e . This commit changed the timer migration code to always attempt to migrate timers away from nohz_full cores. While it's discussable if this is correct/desirable (I don't think it is), it's clear that the lapic emulation code has a requirement on firing the hrtimer in the same core where it was started. This is achieved by making the hrtimer pinned. Lastly, note that KVM has code to migrate timers when a vCPU is scheduled to run in different core. However, this forced migration may fail. When this happens, we can have the same problem. If we want 100% correctness, we'll have to modify apic_timer_fn() to cause a kvm exit when it runs on a different core than the vCPU. Not sure if this is possible. Here's a reproducer for the issue being fixed: 1. Set all cores but core0 to be nohz_full cores 2. Start a guest with a single vCPU 3. Trace apic_timer_fn() and kvm_inject_apic_timer_irqs() You'll see that apic_timer_fn() will run in core0 while kvm_inject_apic_timer_irqs() runs in a different core. If you get both on core0, try running a program that takes 100% of the CPU and pin it to core0 to force the vCPU out. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-