Fixes the following sparse warnings:

drivers/power/ipaq_micro_battery.c:278:24: warning:
 symbol 'micro_batt_device_driver' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This adds a driver for reading the battery status of the
battery connected to the Atmel microcontroller on the
iPAQ h3xxx series.

Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

TWL4030's Battery Charger seems to be designed for non-hotpluggable
batteries.

If battery is not present in the system, BATSTS is always set with the
expectation that software will take actions to move to a required safe
state (could be power down or disable various charger paths).

It does not seem possible even by manipulating the edge detection
of the event (using BCIEDR2 register) to have a consistent hotplug
handling. This seems to be the result of BATSTS interrupt generated
when the thermistor of the battery pack is disconnected from the
dedicated ADIN1 pin. Clearing the status just results in the status
being regenerated by the monitoring ADC(MADC) and disabling the
edges of event just makes hotplug no longer function. The only
other option is to disable the detection of the MADC by disabling
BCIMFEN4::BATSTSMCHGEN (battery presence detector) - but then, we can
never again detect battery reconnection.

So, detect battery presence based on precharge(which is hardware
automatic state) or default main charger configuration at the time of
probe and enable charger logic only if battery was present.

Reported-by: Russell King <linux@arm.linux.org.uk>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Add support for reboot functionality on boards with ARM-based
Broadcom STB chipsets. Make it built-in by default for ARCH_BRCMSTB,
but allow it to be configurable under COMPILE_TEST.

Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Fixes the following sparse warnings:

drivers/power/power_supply_core.c:540:5: warning:
 symbol '__power_supply_register' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Add new power supply properties for input current, charge termination
current, min and max temperature

POWER_SUPPLY_PROP_TEMP_MIN - minimum operatable temperature
POWER_SUPPLY_PROP_TEMP_MAX - maximum operatable temperature

POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT - input current limit programmed
by charger. Indicates the input current for a charging source.

POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT - Charge termination current used
to detect the end of charge condition

Signed-off-by: Jenny TC <jenny.tc@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

On the ARM Chromebook tps65090 has two masters: the AP (the main
processor running linux) and the EC (the embedded controller).  The AP
is allowed to mess with FETs but the EC is in charge of charge control.

The tps65090 interupt line is routed to both the AP and the EC, which
can cause quite a headache.  Having two people adjusting masks and
acking interrupts is a recipe for disaster.

In the shipping kernel we had a hack to have the AP pay attention to
the IRQ but not to ack it.  It also wasn't supposed to configure the
IRQ in any way.  That hack allowed us to detect when the device was
charging without messing with the EC's state.

The current tps65090 infrastructure makes the above difficult, and it
was a bit of a hack to begin with.  Rather than uglify the driver to
support it, just extend the driver's existing notion of "no irq" to
the charger.  This makes the charger code poll every 2 seconds for AC
detect, which is sufficient.

For proper functioning, requires (mfd: tps65090: Don't tell child
devices we have an IRQ if we don't).  If we don't have that patch
we'll simply fail to probe on devices without an interrupt (just like
we did before this patch).

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[sre@kernel.org: Use -ENXIO instead of NO_IRQ for missing interrupt,
since NO_IRQ is not available on all architectures.]
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This switches the GPIO poweroff driver to use GPIO descriptors
rather than numeral GPIOs. We get rid of the specific inversion
handling as GPIO descriptors know if they are active low or
high and can assert the line properly, so we do not need to
check the flag OF_GPIO_ACTIVE_LOW returned from the old call
of_get_gpio_flags() anymore.

Also convert to use managed resources and use dev_* message
printing while we're at it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

One an hdq buss, a missing device reads as 0xff, not -1.
So do a translation to allow detecting of a missing bus.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions for both platform and i2c drivers. Also, the unecessary
variable ret and labels batt_failed3, err_free were removed.

The following Coccinele script was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Add devicetree binding documentation for rx51-battery,
which is a simple A/D converter consumer.

Signed-off-by: Sebastian Reichel <sre@kernel.org>

Update rx51-battery driver to use the new IIO API of
twl4030-madc and add DT support.

Signed-off-by: Sebastian Reichel <sre@kernel.org>

Move sysfs_notify and i2c_transfer calls from bq2415x_notifier_call
to bq2415x_timer_work to avoid sleeping in atomic context.

This fixes the following bug:

[ 7.667449] Workqueue: events power_supply_changed_work
[ 7.673034] [<c0015c28>] (unwind_backtrace+0x0/0xe0) from [<c0011e1c>] (show_stack+0x10/0x14)
[ 7.682098] [<c0011e1c>] (show_stack+0x10/0x14) from [<c052cdd0>] (dump_stack+0x78/0xac)
[ 7.690704] [<c052cdd0>] (dump_stack+0x78/0xac) from [<c052a044>] (__schedule_bug+0x48/0x60)
[ 7.699645] [<c052a044>] (__schedule_bug+0x48/0x60) from [<c053071c>] (__schedule+0x74/0x638)
[ 7.708618] [<c053071c>] (__schedule+0x74/0x638) from [<c05301fc>] (schedule_timeout+0x1dc/0x24c)
[ 7.718017] [<c05301fc>] (schedule_timeout+0x1dc/0x24c) from [<c05316ec>] (wait_for_common+0x138/0x17c)
[ 7.727966] [<c05316ec>] (wait_for_common+0x138/0x17c) from [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0)
[ 7.737640] [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) from [<c035d928>] (__i2c_transfer+0x40/0x74)
[ 7.747039] [<c035d928>] (__i2c_transfer+0x40/0x74) from [<c035e22c>] (i2c_transfer+0x6c/0x90)
[ 7.756195] [<c035e22c>] (i2c_transfer+0x6c/0x90) from [<c037ad24>] (bq2415x_i2c_write+0x48/0x78)
[ 7.765563] [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) from [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50)
[ 7.776824] [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) from [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c)
[ 7.788085] [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) from [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4)
[ 7.798309] [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) from [<c005f228>] (notifier_call_chain+0x38/0x68)
[ 7.808715] [<c005f228>] (notifier_call_chain+0x38/0x68) from [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c)
[ 7.819732] [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) from [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18)
[ 7.831420] [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) from [<c0378078>] (power_supply_changed_work+0x6c/0xb8)
[ 7.842864] [<c0378078>] (power_supply_changed_work+0x6c/0xb8) from [<c00556c0>] (process_one_work+0x248/0x440)
[ 7.853546] [<c00556c0>] (process_one_work+0x248/0x440) from [<c0055d6c>] (worker_thread+0x208/0x350)
[ 7.863372] [<c0055d6c>] (worker_thread+0x208/0x350) from [<c005b0ac>] (kthread+0xc8/0xdc)
[ 7.872131] [<c005b0ac>] (kthread+0xc8/0xdc) from [<c000e138>] (ret_from_fork+0x14/0x3c)

Fixes: 32260308

 ("bq2415x_charger: Use power_supply notifier for automode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Pull gfs2 fixes from Steven Whitehouse:
 "This patch set contains two minor docs/spelling fixes, some fixes for
  flock, a change to use GFP_NOFS to avoid recursion on a rarely used
  code path and a fix for a race relating to the glock lru"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
  GFS2: memcontrol: Spelling s/invlidate/invalidate/
  GFS2: Allow caching of glocks for flock
  GFS2: Allow flocks to use normal glock dq rather than dq_wait
  GFS2: replace count*size kzalloc by kcalloc
  GFS2: Use GFP_NOFS when allocating glocks
  GFS2: Fix race in glock lru glock disposal
  GFS2: Only wait for demote when last holder is dequeued

Pull device mapper fixes from Mike Snitzer:
 "Fix the dm-thinp and dm-cache targets to disallow changing the data
  device's block size"

* tag 'dm-3.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: do not allow the data block size to change
  dm thin metadata: do not allow the data block size to change

Pull UBI fixes from Artem Bityutskiy:
 "Two UBI fastmap-related fixes for v3.16:

   - fix UBI fastmap support which we broke in 3.16-rc1 by reversing the
     volumes RB-tree sorting criteria.
   - make sure that we scrub all PEBs where we see bit-flips - we were
     missing some of them when the fastmap feature was enabled"

* tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs:
  UBI: fastmap: do not miss bit-flips
  UBI: fix the volumes tree sorting criteria

Pull xfs fixes from Dave Chinner:
 "Fixes for low memory perforamnce regressions and a quota inode
  handling regression.

  These are regression fixes for issues recently introduced - the change
  in the stack switch location is fairly important, so I've held off
  sending this update until I was sure that it still addresses the stack
  usage problem the original solved.  So while the commits in the xfs
  tree are recent, it has been under tested for several weeks now"

* tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfs:
  xfs: null unused quota inodes when quota is on
  xfs: refine the allocation stack switch
  Revert "xfs: block allocation work needs to be kswapd aware"

Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: cluster-devel@redhat.com
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch removes the GLF_NOCACHE flag from the glocks associated with
flocks. There should be no good reason not to cache glocks for flocks:
they only force the glock to be demoted before they can be reacquired,
which can slow down performance and even cause glock hangs, especially
in cases where the flocks are held in Shared (SH) mode.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch allows flock glocks to use a non-blocking dequeue rather
than dq_wait. It also reverts the previous patch I had posted regarding
dq_wait. The reverted patch isn't necessarily a bad idea, but I decided
this might avoid unforeseen side effects, and was therefore safer.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

kcalloc manages count*sizeof overflow.

Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Normally GFP_KERNEL is ok here, but there is now a rarely used code path
relating to deallocation of unlinked inodes (in certain corner cases)
which if hit at times of memory shortage can cause recursion while
trying to free memory.

One solution would be to try and move the gfs2_glock_get() call so
that it is no longer called while another glock is held, but that
doesn't look at all easy, so GFP_NOFS is the best solution for the
time being.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

We must not leave items on the LRU list with GLF_LOCK set, since
they can be removed if the glock is brought back into use, which
may then potentially result in a hang, waiting for GLF_LOCK to
clear.

It doesn't happen very often, since it requires a glock that has
not been used for a long time to be brought back into use at the
same moment that the shrinker is part way through disposing of
glocks.

The fix is to set GLF_LOCK at a later time, when we already know
that the other locks can be obtained. Also, we now only release
the lru_lock in case a resched is needed, rather than on every
iteration.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Function gfs2_glock_dq_wait is supposed to dequeue a glock and then
wait for the lock to be demoted. The problem is, if this is a shared
lock, its demote will depend on the other holders, which means you
might end up waiting forever because the other process is blocked.
This problem is especially apparent when dealing with nested flocks.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Two fixes found during migration of PV guests.  David would be the one
  doing this pull but he is on vacation.

  Fixes:
   - fix console deadlock when resuming PV guests
   - fix regression hit when ballooning and resuming PV guests"

* tag 'stable/for-linus-3.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: set ballooned out pages as invalid in p2m
  xen/manage: fix potential deadlock when resuming the console

Merge tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "A few more fixes for ftrace infrastructure.

  I was cleaning out my INBOX and found two fixes from zhangwei from a
  year ago that were lost in my mail.  These fix an inconsistency
  between trace_puts() and the way trace_printk() works.  The reason
  this is important to fix is because when trace_printk() doesn't have
  any arguments, it turns into a trace_puts().  Not being able to enable
  a stack trace against trace_printk() because it does not have any
  arguments is quite confusing.  Also, the fix is rather trivial and low
  risk.

  While porting some changes to PowerPC I discovered that it still has
  the function graph tracer filter bug that if you also enable stack
  tracing the function graph tracer filter is ignored.  I fixed that up.

  Finally, Martin Lau, fixed a bug that would cause readers of the
  ftrace ring buffer to block forever even though it was suppose to be
  NONBLOCK"

This also includes the fix from an earlier pull request:

 "Oleg Nesterov fixed a memory leak that happens if a user creates a
  tracing instance, sets up a filter in an event, and then removes that
  instance.  The filter allocates memory that is never freed when the
  instance is destroyed"

* tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix polling on trace_pipe
  tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs
  tracing: Fix graph tracer with stack tracer on other archs
  tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
  tracing: instance_rmdir() leaks ftrace_event_file->filter

Pull MTD fixes from Brian Norris:

 - Fix ELM suspend/resume

 - Reduce warnings if NAND ECC is too weak

 - Add CFI support for Sharp LH28F640BF NOR

   The last fix is coming in because other commits in the 3.16 cycle
   depended on this support.

* tag 'for-linus-20140716' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR
  mtd: nand: reduce the warning noise when the ECC is too weak
  mtd: devices: elm: fix elm_context_save() and elm_context_restore() functions

Pull scheduler fixes from Ingo Molnar:
 "A cpufreq lockup fix and a compiler warning fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix compiler warnings
  x86, tsc: Fix cpufreq lockup

Pull perf fixes from Ingo Molnar:
 "Tooling fixes and an Intel PMU driver fixlet"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Do not allow optimized switch for non-cloned events
  perf/x86/intel: ignore CondChgd bit to avoid false NMI handling
  perf symbols: Get kernel start address by symbol name
  perf tools: Fix segfault in cumulative.callchain report

Pull sound fixes from Takashi Iwai:
 "Things seem to calm down so far, just a small few HD-audio fixes
  (regression fixes and a new codec ID addition) popping up"

* tag 'sound-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix broken PM due to incomplete i915 initialization
  ALSA: hda - Revert stream assignment order for Intel controllers
  ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hda
  ALSA: hda: Fix build warning

The return value from 'ubi_io_read_ec_hdr()' was stored in 'err', not in 'ret'.
This fix makes sure Fastmap-enabled UBI does not miss bit-flip while reading EC
headers, events and scrubs the affected PEBs.

This issue was reported by Coverity Scan.

Artem: improved the commit message.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Pull quota fix from Jan Kara:
 "Fix locking of dquot shrinker"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: missing lock in dqcache_shrink_scan()

Pull GPIO fix from Linus Walleij:
 "Fix up some merge confusion from the merge window"

* tag 'gpio-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mcp23s08: Eliminates redundant checking.

ring_buffer_poll_wait() should always put the poll_table to its wait_queue
even there is immediate data available.  Otherwise, the following epoll and
read sequence will eventually hang forever:

1. Put some data to make the trace_pipe ring_buffer read ready first
2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee)
3. epoll_wait()
4. read(trace_pipe_fd) till EAGAIN
5. Add some more data to the trace_pipe ring_buffer
6. epoll_wait() -> this epoll_wait() will block forever

~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2,
  ring_buffer_poll_wait() returns immediately without adding poll_table,
  which has poll_table->_qproc pointing to ep_poll_callback(), to its
  wait_queue.
~ During the epoll_wait() call in step 3 and step 6,
  ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue
  because the poll_table->_qproc is NULL and it is how epoll works.
~ When there is new data available in step 6, ring_buffer does not know
  it has to call ep_poll_callback() because it is not in its wait queue.
  Hence, block forever.

Other poll implementation seems to call poll_wait() unconditionally as the very
first thing to do.  For example, tcp_poll() in tcp.c.

Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com

Cc: stable@vger.kernel.org # 2.6.27
Fixes: 2a2cc8f7

 "ftrace: allow the event pipe to be polled"
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Martin Lau <kafai@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Commit 1ab6c499 (fs: convert fs shrinkers to new scan/count API)
accidentally removed locking from quota shrinker. Fix it -
dqcache_shrink_scan() should use dq_list_lock to protect the
scan on free_dquots list.

CC: stable@vger.kernel.org
Fixes: 1ab6c499


Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>

The block size for the dm-cache's data device must remained fixed for
the life of the cache.  Disallow any attempt to change the cache's data
block size.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org

The block size for the thin-pool's data device must remained fixed for
the life of the thin-pool.  Disallow any attempt to change the
thin-pool's data block size.

It should be noted that attempting to change the data block size via
thin-pool table reload will be ignored as a side-effect of the thin-pool
handover that the thin-pool target does during thin-pool table reload.

Here is an example outcome of attempting to load a thin-pool table that
reduced the thin-pool's data block size from 1024K to 512K.

Before:
kernel: device-mapper: thin: 253:4: growing the data device from 204800 to 409600 blocks

After:
kernel: device-mapper: thin metadata: changing the data block size (from 2048 to 1024) is not supported
kernel: device-mapper: table: 253:4: thin-pool: Error creating metadata object
kernel: device-mapper: ioctl: error adding target to table

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org

The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing,
so add it, to be consistent with __trace_printk/__trace_bprintk.
Those functions are all called by the same function: trace_printk().

Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com



Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>