- Jan 15, 2018
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Offload PRIO qdisc Nogah says: Add an offload support for PRIO qdisc for mlxsw driver. PRIO qdisc is being offloaded by using ndo_setup_tc. It has three commands, to set or tune the qdisc, to remove it and to get its stats. Like RED offloading, offloading this qdisc is not enforced on the driver and determining its offload state is done in the dump action, when the stats are being updated. In the driver, offloading of PRIO is supported as root qdisc only. It supports only priorities 0-7 (the range that is used by the current static mapping of DSCP to skb prio and by 1:1 PCP values mapping) and up to 8 bands. Patches 1-2 offload DSCP to priority mapping in the mlxsw_sp driver. Patch 3 adds offload support for PRIO qdisc. Patches 4-5 Add PRIO offload support in the mlxsw_sp driver. --- v1->v2: - Patch 1/5: - Rewrite patch msg - Patch 3/5: - Send all the qstats in the replace command (and not just backlog) - Patch 5/5: - Align with the changes from 3/5 - Move backlog to the generic qdisc stats struct - Delete extra newline ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Support basic stats for PRIO qdisc, which includes tx packets and bytes count, drops count and backlog size. The rest of the stats are irrelevant for this qdisc offload. Since backlog is not only incremental but reflecting momentary value, in case of a qdisc that stops being offloaded but is not destroyed, backlog value needs to be updated about the un-offloading. For that reason an unoffload function is being added to the ops struct. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add support for offloading PRIO qdisc as root qdisc. The support is for up to 8 bands. Routed packets priority is determined by the DSCP field with the default translations. Bridged packets priority is determined by the PCP field, if exist, otherwise it is set to 0. Since both options have only priorities 0-7, higher priorities mapping are being ignored. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add the ability to offload PRIO qdisc by using ndo_setup_tc. There are three commands for PRIO offloading: * TC_PRIO_REPLACE: handles set and tune * TC_PRIO_DESTROY: handles qdisc destroy * TC_PRIO_STATS: updates the qdiscs counters (given as reference) Like RED qdisc, the indication of whether PRIO is being offloaded is being set and updated as part of the dump function. It is so because the driver could decide to offload or not based on the qdisc parent, which could change without notifying the qdisc. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
When routing ip packets, the kernel is setting the SKB's priority based on the tos field of the packet. Imitate this behavior in the mlxsw router, having the internal switch priority of a routed packet determined according to its DS field. Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Add rdpm definition - router DSCP to priority mapping register. This register will be utilized later to align the default mapping between packet DSCP and switch-priority to the kernel's mapping between packet priority and skb priority. This is the first non-bit indexed register where the entries are arranged in descending order, i.e., entry at offset 0 matches configuration for dscp[63]. As a result, the item's step is converted into a signed variable to support descending arrays [where step would be negative]. Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6xxx: ATU and VTU interrupts Both the ATU and VTU of Mavell switches can generate interrupts when violations occur. Trap this interrupts and print what violation occurred. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When there is a problem with the VTU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When there is a problem with the ATU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Since commit eb789980 ("mlxsw: spectrum_router: Populate adjacency entries according to weights") the driver includes support for non-equal-cost multipath, but IPv4 nexthops were the only user. Now that the kernel supports weighted IPv6 nexthops, we can extend the driver to support it as well. This is done by assigning each nexthop its configured weight, so that it will be populated accordingly in the device's adjacency table. The `weight` parameter is also taken into account when comparing nexthop groups in order not to consolidate non-identical groups. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
On targets that have different sizes for phys_addr_t and dma_addr_t, we get a type mismatch error: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_alloc_dring': drivers/net/ethernet/socionext/netsec.c:970:9: error: passing argument 3 of 'dma_zalloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The code is otherwise correct, as the address is never actually used as a physical address but only passed into a DMA register. For consistently, I'm changing the variable name as well, to clarify that this is a DMA address. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 12, 2018
-
-
David S. Miller authored
Peng Li says: ==================== hns3: add some new features and fix some bugs This patchset adds 3 ethtool features: get_channels, get_coalesce and get_coalesce, and fix some bugs. [patch 1/11] adds ethtool_ops.get_channels (ethtool -l) support for VF. [patch 2/11] removes TSO config command from VF driver, as only main PF can config TSO MSS length according to hardware. [patch 3/11 - 4/11] add ethtool_ops {get|set}_coalesce (ethtool -c/-C) support to PF. [patch 5/11 - 9/11] fix some bugs related to {get|set}_coalesce. [patch 10/11 - 11/11] fix the features handling in hns3_nic_set_features(). Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking to improve the reliability. --- Change log: V1 -> V2: 1, Rewrite the cover letter requested by David Miller. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jian Shen authored
It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jian Shen authored
Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6d ("net: hns3: add ethtool related offload command") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
If the int_gl_idx does not be set, the default interrupt coalesce index is 0. The TX queues and the RX queues will both use the GL0 as the interrupt coalesce GL switch. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for TX queues and RX queues. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
Previously, driver used 2us as the GL unit. The time unit ethtool command "-c" and "-C" use is 1us, so now the GL unit driver uses actually is 1us. This patch changes the unit of GL value macro from 2us to 1us. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
Since the TX GL and the RX GL need to be set separately, hns3_set_vector_coalesc_gl() has been replaced with hns3_set_vector_coalesce_rx_gl() and hns3_set_vector_coalesce_tx_gl(). This patch removes hns3_set_vector_coalesc_gl(). Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
The GL update function uses the max GL value between tx_int_gl and rx_int_gl to set both new tx_int_gl and new rx_int_gl. Therefore, User can not enable TX GL self-adaptive or RX GL self-adaptive individually. This patch refactors the code to update the TX GL and the RX GL separately, making user can enable TX GL self-adaptive or RX GL self-adaptive individually. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fuyun Liang authored
This patch adds ethtool_ops.get_coalesce support to PF. Whilst our hardware supports per queue values, external interfaces support only a single shared value. As such we use the values for queue 0. Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
Only main PF can config TSO MSS length according to hardware. This patch removes TSO config command from VF driver. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch supports the ethtool's get_channels() for VF. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
BPF alignment tests got a conflict because the registers are output as Rn_w instead of just Rn in net-next, and in net a fixup for a testcase prohibits logical operations on pointers before using them. Also, we should attempt to patch BPF call args if JIT always on is enabled. Instead, if we fail to JIT the subprogs we should pass an error back up and fail immediately. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-01-11 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various BPF related improvements and fixes to nfp driver: i) do not register XDP RXQ structure to control queues, ii) round up program stack size to word size for nfp, iii) restrict MTU changes when BPF offload is active, iv) add more fully featured relocation support to JIT, v) add support for signed compare instructions to the nfp JIT, vi) export and reuse verfier log routine for nfp, and many more, from Jakub, Quentin and Nic. 2) Fix a syzkaller reported GPF in BPF's copy_verifier_state() when we hit kmalloc failure path, from Alexei. 3) Add two follow-up fixes for the recent XDP RXQ series: i) kvzalloc() allocated memory was only kfree()'ed, and ii) fix a memory leak where RX queue was not freed in netif_free_rx_queues(), from Jakub. 4) Add a sample for transferring XDP meta data into the skb, here it is used for setting skb->mark with the buffer from XDP, from Jesper. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-01-11 Here's likely the last bluetooth-next pull request for the 4.16 kernel. - Added support for Bluetooth on 2015+ MacBook (Pro) - Fix to QCA Rome suspend/resume handling - Two new QCA_ROME USB IDs in btusb - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
I ran into a randconfig build failure: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe': drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration] Including linux/io.h directly fixes this. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-10 This series contains updates to i40e and i40evf only. Alice adds the displaying of priority xon/xoff packet stats, since we were already keeping track of them. Based on the recent changes, bump the driver versions. Jake changes how the driver determines whether or not the device is currently up to resolve the possible issue of freeing data structures and other memory before they have been fully allocated. Refactored the driver to simplify the locking behavior and to consistently use spinlocks instead of an overloaded bit lock to protect MAC and filter lists. Created a helper function which can convert the AdminQ link speed definition into a virtchnl definition. Colin Ian King cleans up a redundant variable initialization. Alex cleans up the driver to stop clearing the pending bit array for each vector manually, since it is prone to dropping an interrupt and based on the hardware specs, the pending bit array will be cleared automatically in MSI-X mode. Cleaned up flags for promiscuous mode to resolve an issue where enabling & disabling promiscuous mode on a VF would leave us in a high polling rate for the adminq task. Cleaned up code that was prone to race issues. Jingjing renames pipeline personalization profile (ppp) to dynamic device personalization (ddp) because it was being confused with the well known point to point protocol. Also removed checks for "track_id" being zero, since it is valid for it to be zero for profiles that do not have any 'write' commands. v2: cleaned up commit message for patch 12 based on feedback from Sergei Shtylyov and Alex Duyck v3: dropped patch 15 from the original series while Mariusz Stachura works on the changes that Jakub Kicinski has suggested ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Fontenot authored
Initiating a kdump via the command line can cause a pending interrupt to be handled by the ibmvnic driver when initializing the sub-CRQ irqs during driver initialization. NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic] LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 Call Trace: [c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 [c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90 [c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0 [c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250 [c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80 [c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0 [c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24 [c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120 [c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180 Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 11, 2018
-
-
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del to support vxlan tunnelling. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs regression fix from Al Viro/ Fix a leak in socket() introduced by commit 8e1611e2 ("make sock_alloc_file() do sock_release() on failures"). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Fix a leak in socket(2) when we fail to allocate a file descriptor.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
-
Jesper Dangaard Brouer authored
Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-