- Feb 17, 2009
-
-
Steven Rostedt authored
Impact: new feature Currently, the function tracer only gives you an ability to hook a tracer to all functions being traced. The dynamic function trace allows you to pick and choose which of those functions will be traced, but all functions being traced will call all tracers that registered with the function tracer. This patch adds a new feature that allows a tracer to hook to specific functions, even when all functions are being traced. It allows for different functions to call different tracer hooks. The way this is accomplished is by a special function that will hook to the function tracer and will set up a hash table knowing which tracer hook to call with which function. This is the most general and easiest method to accomplish this. Later, an arch may choose to supply their own method in changing the mcount call of a function to call a different tracer. But that will be an exercise for the future. To register a function: struct ftrace_hook_ops { void (*func)(unsigned long ip, unsigned long parent_ip, void **data); int (*callback)(unsigned long ip, void **data); void (*free)(void **data); }; int register_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops, void *data); glob is a simple glob to search for the functions to hook. ops is a pointer to the operations (listed below) data is the default data to be passed to the hook functions when traced ops: func is the hook function to call when the functions are traced callback is a callback function that is called when setting up the hash. That is, if the tracer needs to do something special for each function, that is being traced, and wants to give each function its own data. The address of the entry data is passed to this callback, so that the callback may wish to update the entry to whatever it would like. free is a callback for when the entry is freed. In case the tracer allocated any data, it is give the chance to free it. To unregister we have three functions: void unregister_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops, void *data) This will unregister all hooks that match glob, point to ops, and have its data matching data. (note, if glob is NULL, blank or '*', all functions will be tested). void unregister_ftrace_function_hook_func(char *glob, struct ftrace_hook_ops *ops) This will unregister all functions matching glob that has an entry pointing to ops. void unregister_ftrace_function_hook_all(char *glob) This simply unregisters all funcs. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up Now that ftrace_lock is a mutex, there is no reason to have three different mutexes protecting similar data. All the mutex paths are not in hot paths, so having a mutex to cover more data is not a problem. This patch removes the ftrace_sysctl_lock and ftrace_start_lock and uses the ftrace_lock to protect the locations that were protected by these locks. By doing so, this change also removes some of the lock nesting that was taking place. There are still more mutexes in ftrace.c that can probably be consolidated, but they can be dealt with later. We need to be careful about the way the locks are nested, and by consolidating, we can cause a recursive deadlock. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up The older versions of ftrace required doing the ftrace list search under atomic context. Now all the calls are in non-atomic context. There is no reason to keep the ftrace_lock as a spinlock. This patch converts it to a mutex. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Allow for other tracers to add their own commands for function selection. This interface gives a trace the ability to name a command for function selection. Right now it is pretty limited in what it offers, but this is a building step for more features. The :mod: command is converted to this interface and also serves as a template for other implementations. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: fix to prevent empty set_ftrace_filter and no ftrace output The function filter is used to only trace a given set of functions. The filter is enabled when a function name is echoed into the set_ftrace_filter file. But if the name has a typo and the function is not found, the filter is enabled, but no function is listed. This makes a confusing situation where set_ftrace_filter is empty but no functions ever get enabled for tracing. For example: # cat /debug/tracing/set_ftrace_filter #### all functions enabled #### # echo bad_name > set_ftrace_filter # cat /debug/tracing/set_ftrace_filter # echo function > current_tracer # cat trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | This patch changes that to only enable filtering if a function is set to be filtered on. Now, the filter is not enabled if a bad name is echoed into set_ftrace_filter. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
This patch adds a "command" syntax to the function filtering files: /debugfs/tracing/set_ftrace_filter /debugfs/tracing/set_ftrace_notrace Of the format: <function>:<command>:<parameter> The command is optional, and dependent on the command, so are the parameters. echo do_fork > set_ftrace_filter Will only trace 'do_fork'. echo 'sched_*' > set_ftrace_filter Will only trace functions starting with the letters 'sched_'. echo '*:mod:ext3' > set_ftrace_filter Will trace only the ext3 module functions. echo '*write*:mod:ext3' > set_ftrace_notrace Will prevent the ext3 functions with the letters 'write' in the name from being traced. echo '!*_allocate:mod:ext3' > set_ftrace_filter Will remove the functions in ext3 that end with the letters '_allocate' from the ftrace filter. Although this patch implements the 'command' format, only the 'mod' command is supported. More commands to follow. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up ftrace_match_records does a lot of things that other features can use. This patch breaks up ftrace_match_records and pulls out ftrace_setup_glob and ftrace_match_record. ftrace_setup_glob prepares a simple glob expression for use with ftrace_match_record. ftrace_match_record compares a single record with a glob type. Breaking this up will allow for more features to run on individual records. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up ftrace_match is too generic of a name. What it really does is search all records and matches the records with the given string, and either sets or unsets the functions to be traced depending on if the parameter 'enable' is set or not. This allows us to make another function called ftrace_match that can be used to test a single record. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up To iterate over all the functions that dynamic trace knows about it requires two for loops. One to iterate over the pages and the other to iterate over the records within the page. There are several duplications of these loops in ftrace.c. This patch creates the macros do_for_each_ftrace_rec and while_for_each_ftrace_rec to handle this logic, and removes the duplicate code. While making this change, I also discovered and fixed a small bug that one of the iterations should exit the loop after it found the record it was searching for. This used a break when it should have used a goto, since there were two loops it needed to break out from. No real harm was done by this bug since it would only continue to search the other records, and the code was in a slow path anyway. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up, make set_ftrace_filter less confusing The set_ftrace_filter shows only the functions that will be traced. But when it is empty, it will trace all functions. This can be a bit confusing. This patch makes set_ftrace_filter show: #### all functions enabled #### When all functions will be traced, and we do not filter only a select few. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
- Feb 13, 2009
-
-
Ingo Molnar authored
Merge branch 'tip/tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
-
Ingo Molnar authored
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
-
Ingo Molnar authored
Merge branches 'tracing/ftrace', 'tracing/ring-buffer', 'tracing/sysprof', 'tracing/urgent' and 'linus' into tracing/core
-
Steven Rostedt authored
Impact: avoid corruption in system time accounting Martin Schwidefsky told me that there was an issue with NMIs and system accounting. The problem is that the accounting code is not reentrant, and if an NMI goes off after an interrupt it can corrupt the accounting. For now, the best we can do is to treat NMIs like SMIs and they are not accounted for. This patch changes nmi_enter to not call __irq_enter and to do the preempt-count and tracing calls directly. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Steven Rostedt authored
Impact: clean up While reviewing the ring buffer code, I thougth I saw a bug with if (!__raw_spin_trylock(&cpu_buffer->lock)) goto out_unlock; But I forgot that we use a variable "lock_taken" that is set if the spinlock is taken, and only unlock it if that variable is set. To avoid further confusion from other reviewers, this patch renames the label out_unlock with out_reset, which is the more appropriate name. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: mm: Export symbol ksize()
-
Steven Rostedt authored
To add a bit in the preempt_count to be set when in NMI context, we found that some archs did not have enough bits to spare. This is due to the hardirq_count being a mask that can hold NR_IRQS. Some archs allow for over 16000 IRQs, and that would require a mask of 14 bits. The sofitrq mask is 8 bits and the preempt disable mask is also 8 bits. The PREEMP_ACTIVE bit is bit 30, and bit 31 would make the preempt_count (which is type int) a negative number. A negative preempt_count is a sign of failure. Add them up 14+8+8+1+1 you get 32 bits. No room for the NMI bit. But the hardirq_count is to track the number of nested IRQs, not the number of total IRQs. This originally took the paranoid approach of setting the max nesting to NR_IRQS. But when we have archs with over 1000 IRQs, it is not practical to think they will ever all nest on a single CPU. Not to mention that this would most definitely cause a stack overflow. This patch sets a max of 10 bits to be used for IRQ nesting. I did a 'git grep HARDIRQ' to examine all users of HARDIRQ_BITS and HARDIRQ_MASK, and found that making it a max of 10 would not hurt anyone. I did find that the m68k expected it to be 8 bits, so I allow for the archs to set the number to be less than 10. I removed the setting of HARDIRQ_BITS from the archs that set it to more than 10. This includes ALPHA, ia64 and avr32. This will always allow room for the NMI bit, and if we need to allow for NMI nesting, we have 4 bits to play with. Signed-off-by:
Steven Rostedt <srostedt@redhat.com>
-
Nick Piggin authored
A bug was introduced into write_cache_pages cyclic writeout by commit 31a12666 ("mm: write_cache_pages cyclic fix"). The intention (and comments) is that we should cycle back and look for more dirty pages at the beginning of the file if there is no more work to be done. But the !done condition was dropped from the test. This means that any time the page writeout loop breaks (eg. due to nr_to_write == 0), we will set index to 0, then goto again. This will set done_index to index, then find done is set, so will proceed to the end of the function. When updating mapping->writeback_index for cyclic writeout, we now use done_index == 0, so we're always cycling back to 0. This seemed to be causing random mmap writes (slapadd and iozone) to start writing more pages from the LRU and writeout would slowdown, and caused bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=12604 about Berkeley DB slowing down dramatically. With this patch, iozone random write performance is increased nearly 5x on my system (iozone -B -r 4k -s 64k -s 512m -s 1200m on ext2). Signed-off-by:
Nick Piggin <npiggin@suse.de> Reported-and-tested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Feb 12, 2009
-
-
Kirill A. Shutemov authored
Commit 7b2cd92a ("crypto: api - Fix zeroing on free") added modular user of ksize(). Export that to fix crypto.ko compilation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi>
-
git://git.infradead.org/users/cbou/battery-2.6.29Linus Torvalds authored
* git://git.infradead.org/users/cbou/battery-2.6.29: pcf50633_charger: Fix typo
-
Ian Dall authored
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12646 When the temperature exceeds 32767 milli-degrees the temperature overflows to -32768 millidegrees. These are bothe well within the -55 - +125 degree range for the sensor. Fix overflow in left-shift of a u8. Signed-off-by:
Ian Dall <ian@beware.dropbear.id.au> Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Clements authored
Fix a problem that causes I/O to a disconnected (or partially initialized) nbd device to hang indefinitely. To reproduce: # ioctl NBD_SET_SIZE_BLOCKS /dev/nbd23 514048 # dd if=/dev/nbd23 of=/dev/null bs=4096 count=1 ...hangs... This can also occur when an nbd device loses its nbd-client/server connection. Although we clear the queue of any outstanding I/Os after the client/server connection fails, any additional I/Os that get queued later will hang. This bug may also be the problem reported in this bug report: http://bugzilla.kernel.org/show_bug.cgi?id=12277 Testing would need to be performed to determine if the two issues are the same. This problem was introduced by the new request handling thread code ("NBD: allow nbd to be used locally", 3/2008), which entered into mainline around 2.6.25. The fix, which is fairly simple, is to restore the check for lo->sock being NULL in do_nbd_request. This causes I/O to an uninitialized nbd to immediately fail with an I/O error, as it did prior to the introduction of this bug. Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Reported-by:
Jon Nelson <jnelson-kernel-bugzilla@jamponi.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: <stable@kernel.org> [2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeremy Fitzhardinge authored
Christophe Saout reported [in precursor to: http://marc.info/?l=linux-kernel&m=123209902707347&w=4]: > Note that I also some a different issue with CONFIG_UNEVICTABLE_LRU. > Seems like Xen tears down current->mm early on process termination, so > that __get_user_pages in exit_mmap causes nasty messages when the > process had any mlocked pages. (in fact, it somehow manages to get into > the swapping code and produces a null pointer dereference trying to get > a swap token) Jeremy explained: Yes. In the normal case under Xen, an in-use pagetable is "pinned", meaning that it is RO to the kernel, and all updates must go via hypercall (or writes are trapped and emulated, which is much the same thing). An unpinned pagetable is not currently in use by any process, and can be directly accessed as normal RW pages. As an optimisation at process exit time, we unpin the pagetable as early as possible (switching the process to init_mm), so that all the normal pagetable teardown can happen with direct memory accesses. This happens in exit_mmap() -> arch_exit_mmap(). The munlocking happens a few lines below. The obvious thing to do would be to move arch_exit_mmap() to below the munlock code, but I think we'd want to call it even if mm->mmap is NULL, just to be on the safe side. Thus, this patch: exit_mmap() needs to unlock any locked vmas before calling arch_exit_mmap, as the latter may switch the current mm to init_mm, which would cause the former to fail. Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christophe Saout <christophe@saout.de> Cc: Keir Fraser <keir.fraser@eu.citrix.com> Cc: Christophe Saout <christophe@saout.de> Cc: Alex Williamson <alex.williamson@hp.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
Since netmos 9835 with subids 0x1014(IBM):0x0299 is now bound with serial/8250_pci, because it has no parallel ports and subdevice id isn't in the expected form, return -ENODEV from probe function. This is performed in netmos preinit_hook. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Federico Cuello authored
Commit dcf6a79d ("write-back: fix nr_to_write counter") fixed nr_to_write counter, but didn't set the break condition properly. If nr_to_write == 0 after being decremented it will loop one more time before setting done = 1 and breaking the loop. [akpm@linux-foundation.org: coding-style fixes] Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
With the new system call defines we get this on uml: arch/um/sys-i386/built-in.o: In function `sys_call_table': (.rodata+0x308): undefined reference to `sys_sigprocmask' Reason for this is that uml passes the preprocessor option -Dsigprocmask=kernel_sigprocmask to gcc when compiling the kernel. This causes SYSCALL_DEFINE3(sigprocmask, ...) to be expanded to SYSCALL_DEFINEx(3, kernel_sigprocmask, ...) and finally to a system call named sys_kernel_sigprocmask. However sys_sigprocmask is missing because of this. To avoid macro expansion for the system call name just concatenate the name at first define instead of carrying it through severel levels. This was pointed out by Al Viro. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
WANG Cong <wangcong@zeuux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Carsten Otte authored
For a reason that I was unable to understand in three months of debugging, mount ext2 -o remount stopped working properly when remounting from regular operation to xip, or the other way around. According to a git bisect search, the problem was introduced with the VM_MIXEDMAP/PTE_SPECIAL rework in the vm: commit 70688e4d Author: Nick Piggin <npiggin@suse.de> Date: Mon Apr 28 02:13:02 2008 -0700 xip: support non-struct page backed memory In the failing scenario, the filesystem is mounted read only via root= kernel parameter on s390x. During remount (in rc.sysinit), the inodes of the bash binary and its libraries are busy and cannot be invalidated (the bash which is running rc.sysinit resides on subject filesystem). Afterwards, another bash process (running ifup-eth) recurses into a subshell, runs dup_mm (via fork). Some of the mappings in this bash process were created from inodes that could not be invalidated during remount. Both parent and child process crash some time later due to inconsistencies in their address spaces. The issue seems to be timing sensitive, various attempts to recreate it have failed. This patch refuses to change the xip flag during remount in case some inodes cannot be invalidated. This patch keeps users from running into that issue. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
I enabled all cgroup subsystems when compiling kernel, and then: # mount -t cgroup -o net_cls xxx /mnt # mkdir /mnt/0 This showed up immediately: BUG: MAX_LOCKDEP_SUBCLASSES too low! turning off the locking correctness validator. It's caused by the cgroup hierarchy lock: for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { struct cgroup_subsys *ss = subsys[i]; if (ss->root == root) mutex_lock_nested(&ss->hierarchy_mutex, i); } Now we have 9 cgroup subsystems, and the above 'i' for net_cls is 8, but MAX_LOCKDEP_SUBCLASSES is 8. This patch uses different lockdep keys for different subsystems. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Add Li Zefan as co-maintainer. Acked-by:
Paul Menage <menage@google.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
With a postfix decrement t will reach -1 rather than 0, so neither the warning nor the `goto error_out' will occur. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc processing of SYSCALL wrappers. The SYSCALL wrapper patches played havoc with kernel-doc for syscalls. Syscalls that were scanned for DocBook processing reported warnings like this one, for sys_tgkill: Warning(kernel/signal.c:2285): No description found for parameter 'tgkill' Warning(kernel/signal.c:2285): No description found for parameter 'pid_t' Warning(kernel/signal.c:2285): No description found for parameter 'int' because the macro parameters all "look like" function parameters, although they are not: /** * sys_tgkill - send signal to one specific thread * @tgid: the thread group ID of the thread * @pid: the PID of the thread * @sig: signal to be sent * * This syscall also checks the @tgid and returns -ESRCH even if the PID * exists but it's not belonging to the target process anymore. This * method solves the problem of threads exiting and PIDs getting reused. */ SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig) { ... This patch special-cases the handling SYSCALL_DEFINE* function prototypes by expanding them to long sys_foobar(type1 arg1, type1 arg2, ...) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc-nano-HOWTO.txt to use */ as the ending marker in kernel-doc examples and state that */ is the preferred ending marker. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Reported-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
page_cgroup's page allocation at init/memory hotplug uses kmalloc() and vmalloc(). If kmalloc() failes, vmalloc() is used. This is because vmalloc() is very limited resource on 32bit systems. We want to use kmalloc() first. But in this kind of call, __GFP_NOWARN should be specified. Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Uwe Kleine-Koenig authored
Signed-off-by:
Uwe Kleine-Koenig <ukleinek@strlen.de> Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Marcel Selhorst authored
Update my email address. Signed-off-by:
Marcel Selhorst <m.selhorst@sirrix.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
MinChan Kim authored
When I tested following program, I found that the mlocked counter is strange. It cannot free some mlocked pages. It is because try_to_unmap_file() doesn't check real page mappings in vmas. That is because the goal of an address_space for a file is to find all processes into which the file's specific interval is mapped. It is related to the file's interval, not to pages. Even if the page isn't really mapped by the vma, it returns SWAP_MLOCK since the vma has VM_LOCKED, then calls try_to_mlock_page. After this the mlocked counter is increased again. COWed anon page in a file-backed vma could be a such case. This patch resolves it. -- my test program -- int main() { mlockall(MCL_CURRENT); return 0; } -- before -- root@barrios-target-linux:~# cat /proc/meminfo | egrep 'Mlo|Unev' Unevictable: 0 kB Mlocked: 0 kB -- after -- root@barrios-target-linux:~# cat /proc/meminfo | egrep 'Mlo|Unev' Unevictable: 8 kB Mlocked: 8 kB Signed-off-by:
MinChan Kim <minchan.kim@gmail.com> Acked-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
This reverts commit c87591b7 . Since journal_start_commit() is now fixed to return 1 when we started a transaction commit, there's some transaction waiting to be committed or there's a transaction already committing, we don't need to call ext3_force_commit() in ext3_sync_fs(). Furthermore ext3_force_commit() can unnecessarily create sync transaction which is expensive so it's worthwhile to remove it when we can. Cc: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
journal_start_commit() returns 1 if either a transaction is committing or the function has queued a transaction commit. But it returns 0 if we raced with somebody queueing the transaction commit as well. This resulted in ext3_sync_fs() not functioning correctly (description from Arthur Jones): In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. This can be reproduced with a script created by Eric Sandeen <sandeen@redhat.com>: #!/bin/bash umount /mnt/test2 mount /dev/sdb4 /mnt/test2 rm -f /mnt/test2/* dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512 touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename /mnt/test2/link umount /mnt/test2 mount /dev/sdb4 /mnt/test2 ls /mnt/test2/ This patch fixes journal_start_commit() to always return 1 when there's a transaction committing or queued for commit. Cc: Eric Sandeen <sandeen@redhat.com> Cc: Mike Snitzer <snitzer@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sven Wegener authored
We need to pass an unsigned long as the minimum, because it gets casted to an unsigned long in the sysctl handler. If we pass an int, we'll access four more bytes on 64bit arches, resulting in a random minimum value. [rientjes@google.com: fix type of `old_bytes'] Signed-off-by:
Sven Wegener <sven.wegener@stealer.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
We weren't properly allocating the cmap for depths greater than 8bpp, which caused pain for things like DirectFB. Also, we never freed the cmap memory upon module unload.. Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Marco La Porta <marco-laporta@tiscali.it> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-