- Oct 10, 2017
-
-
Steven Rostedt (Red Hat) authored
When a CPU lowers its priority (schedules out a high priority task for a lower priority one), a check is made to see if any other CPU has overloaded RT tasks (more than one). It checks the rto_mask to determine this and if so it will request to pull one of those tasks to itself if the non running RT task is of higher priority than the new priority of the next task to run on the current CPU. When we deal with large number of CPUs, the original pull logic suffered from large lock contention on a single CPU run queue, which caused a huge latency across all CPUs. This was caused by only having one CPU having overloaded RT tasks and a bunch of other CPUs lowering their priority. To solve this issue, commit: b6366f04 ("sched/rt: Use IPI to trigger RT task push migration instead of pulling") changed the way to request a pull. Instead of grabbing the lock of the overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work. Although the IPI logic worked very well in removing the large latency build up, it still could suffer from a large number of IPIs being sent to a single CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet, when I tested this on a 120 CPU box, with a stress test that had lots of RT tasks scheduling on all CPUs, it actually triggered the hard lockup detector! One CPU had so many IPIs sent to it, and due to the restart mechanism that is triggered when the source run queue has a priority status change, the CPU spent minutes! processing the IPIs. Thinking about this further, I realized there's no reason for each run queue to send its own IPI. As all CPUs with overloaded tasks must be scanned regardless if there's one or many CPUs lowering their priority, because there's no current way to find the CPU with the highest priority task that can schedule to one of these CPUs, there really only needs to be one IPI being sent around at a time. This greatly simplifies the code! The new approach is to have each root domain have its own irq work, as the rto_mask is per root domain. The root domain has the following fields attached to it: rto_push_work - the irq work to process each CPU set in rto_mask rto_lock - the lock to protect some of the other rto fields rto_loop_start - an atomic that keeps contention down on rto_lock the first CPU scheduling in a lower priority task is the one to kick off the process. rto_loop_next - an atomic that gets incremented for each CPU that schedules in a lower priority task. rto_loop - a variable protected by rto_lock that is used to compare against rto_loop_next rto_cpu - The cpu to send the next IPI to, also protected by the rto_lock. When a CPU schedules in a lower priority task and wants to make sure overloaded CPUs know about it. It increments the rto_loop_next. Then it atomically sets rto_loop_start with a cmpxchg. If the old value is not "0", then it is done, as another CPU is kicking off the IPI loop. If the old value is "0", then it will take the rto_lock to synchronize with a possible IPI being sent around to the overloaded CPUs. If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no IPI being sent around, or one is about to finish. Then rto_cpu is set to the first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set in rto_mask, then there's nothing to be done. When the CPU receives the IPI, it will first try to push any RT tasks that is queued on the CPU but can't run because a higher priority RT task is currently running on that CPU. Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it finds one, it simply sends an IPI to that CPU and the process continues. If there's no more CPUs in the rto_mask, then rto_loop is compared with rto_loop_next. If they match, everything is done and the process is over. If they do not match, then a CPU scheduled in a lower priority task as the IPI was being passed around, and the process needs to start again. The first CPU in rto_mask is sent the IPI. This change removes this duplication of work in the IPI logic, and greatly lowers the latency caused by the IPIs. This removed the lockup happening on the 120 CPU machine. It also simplifies the code tremendously. What else could anyone ask for? Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and supplying me with the rto_start_trylock() and rto_start_unlock() helper functions. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Clark Williams <williams@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott Wood <swood@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Sebastian Andrzej Siewior authored
A side-effect to the old code is that now SCHED_DEADLINE is also recognized. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171004154901.26904-2-bigeasy@linutronix.de Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Sebastian Andrzej Siewior authored
This helper returns true if a task has elevated priority which is true for RT tasks (SCHED_RR and SCHED_FIFO) and also for SCHED_DEADLINE. A task which runs at RT priority due to PI-boosting is not considered as one with elevated priority. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171004154901.26904-1-bigeasy@linutronix.de Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
find_idlest_group() returns NULL when the local group is idlest. The caller then continues the find_idlest_group() search at a lower level of the current CPU's sched_domain hierarchy. find_idlest_group_cpu() is not consulted and, crucially, @new_cpu is not updated. This means the search is pointless and we return @prev_cpu from select_task_rq_fair(). This is fixed by initialising @new_cpu to @cpu instead of @prev_cpu. Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171005114516.18617-6-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
When 'p' is not allowed on any of the CPUs in the sched_domain, we currently return NULL from find_idlest_group(), and pointlessly continue the search on lower sched_domain levels (where 'p' is also not allowed) before returning prev_cpu regardless (as we have not updated new_cpu). Add an explicit check for this case, and add a comment to find_idlest_group(). Now when find_idlest_group() returns NULL, it always means that the local group is allowed and idlest. Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171005114516.18617-5-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
When the local group is not allowed we do not modify this_*_load from their initial value of 0. That means that the load checks at the end of find_idlest_group cause us to incorrectly return NULL. Fixing the initial values to ULONG_MAX means we will instead return the idlest remote group in that case. Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171005114516.18617-4-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
Since commit: 83a0a96a ("sched/fair: Leverage the idle state info when choosing the "idlest" cpu") find_idlest_group_cpu() (formerly find_idlest_cpu) no longer returns -1, so we can simplify the checking of the return value in find_idlest_cpu(). Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171005114516.18617-3-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
In preparation for changes that would otherwise require adding a new level of indentation to the while(sd) loop, create a new function find_idlest_cpu() which contains this loop, and rename the existing find_idlest_cpu() to find_idlest_group_cpu(). Code inside the while(sd) loop is unchanged. @new_cpu is added as a variable in the new function, with the same initial value as the @new_cpu in select_task_rq_fair(). Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171005114516.18617-2-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
The "goto force_balance" here is intended to mitigate the fact that avg_load calculations can result in bad placement decisions when priority is asymmetrical. The original commit that adds it: fab47622 ("sched: Force balancing on newidle balance if local group has capacity") explains: Under certain situations, such as a niced down task (i.e. nice = -15) in the presence of nr_cpus NICE0 tasks, the niced task lands on a sched group and kicks away other tasks because of its large weight. This leads to sub-optimal utilization of the machine. Even though the sched group has capacity, it does not pull tasks because sds.this_load >> sds.max_load, and f_b_g() returns NULL. A similar but inverted issue also affects ARM big.LITTLE (asymmetrical CPU capacity) systems - consider 8 always-running, same-priority tasks on a system with 4 "big" and 4 "little" CPUs. Suppose that 5 of them end up on the "big" CPUs (which will be represented by one sched_group in the DIE sched_domain) and 3 on the "little" (the other sched_group in DIE), leaving one CPU unused. Because the "big" group has a higher group_capacity its avg_load may not present an imbalance that would cause migrating a task to the idle "little". The force_balance case here solves the problem but currently only for CPU_NEWLY_IDLE balances, which in theory might never happen on the unused CPU. Including CPU_IDLE in the force_balance case means there's an upper bound on the time before we can attempt to solve the underutilization: after DIE's sd->balance_interval has passed the next nohz balance kick will help us out. Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170807163900.25180-1-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Brendan Jackman authored
We use task_util() in find_idlest_group() via capacity_spare_wake(). This task_util() updated in wake_cap(). However wake_cap() is not the only reason for ending up in find_idlest_group() - we could have been sent there by wake_wide(). So explicitly sync the task util with prev_cpu when we are about to head to find_idlest_group(). We could simply do this at the beginning of select_task_rq_fair() (i.e. irrespective of whether we're heading to select_idle_sibling() or find_idlest_group() & co), but I didn't want to slow down the select_idle_sibling() path more than necessary. Don't do this during fork balancing, we won't need the task_util and we'd just clobber the last_update_time, which is supposed to be 0. Signed-off-by:
Brendan Jackman <brendan.jackman@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andres Oportus <andresoportus@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/20170808095519.10077-1-brendan.jackman@arm.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Uladzislau Rezki authored
As a first step this patch makes cfs_tasks list as MRU one. It means, that when a next task is picked to run on physical CPU it is moved to the front of the list. Therefore, the cfs_tasks list is more or less sorted (except woken tasks) starting from recently given CPU time tasks toward tasks with max wait time in a run-queue, i.e. MRU list. Second, as part of the load balance operation, this approach starts detach_tasks()/detach_one_task() from the tail of the queue instead of the head, giving some advantages: - tends to pick a task with highest wait time; - tasks located in the tail are less likely cache-hot, therefore the can_migrate_task() decision is higher. hackbench illustrates slightly better performance. For example doing 1000 samples and 40 groups on i5-3320M CPU, it shows below figures: default: 0.657 avg patched: 0.646 avg Signed-off-by:
Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kirill Tkhai <tkhai@yandex.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/20170913102430.8985-2-urezki@gmail.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Suravee Suthikulpanit authored
On AMD Family17h-based (EPYC) system, a logical NUMA node can contain upto 8 cores (16 threads) with the following topology. ---------------------------- C0 | T0 T1 | || | T0 T1 | C4 --------| || |-------- C1 | T0 T1 | L3 || L3 | T0 T1 | C5 --------| || |-------- C2 | T0 T1 | #0 || #1 | T0 T1 | C6 --------| || |-------- C3 | T0 T1 | || | T0 T1 | C7 ---------------------------- Here, there are 2 last-level (L3) caches per logical NUMA node. A socket can contain upto 4 NUMA nodes, and a system can support upto 2 sockets. With full system configuration, current scheduler creates 4 sched domains: domain0 SMT (span a core) domain1 MC (span a last-level-cache) domain2 NUMA (span a socket: 4 nodes) domain3 NUMA (span a system: 8 nodes) Note that there is no domain to represent cpus spaning a logical NUMA node. With this hierarchy of sched domains, the scheduler does not balance properly in the following cases: Case1: When running 8 tasks, a properly balanced system should schedule a task per logical NUMA node. This is not the case for the current scheduler. Case2: In some cases, threads are scheduled on the same cpu, while other cpus are idle. This results in run-to-run inconsistency. For example: taskset -c 0-7 sysbench --num-threads=8 --test=cpu \ --cpu-max-prime=100000 run Total execution time ranges from 25.1s to 33.5s depending on threads placement, where 25.1s is when all 8 threads are balanced properly on 8 cpus. Introducing NUMA identity node sched domain, which is based on how SRAT/SLIT table define a logical NUMA node. This results in the following hierarchy of sched domains on the same system described above. domain0 SMT (span a core) domain1 MC (span a last-level-cache) domain2 NODE (span a logical NUMA node) domain3 NUMA (span a socket: 4 nodes) domain4 NUMA (span a system: 8 nodes) This fixes the improper load balancing cases mentioned above. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Link: http://lkml.kernel.org/r/1504768805-46716-1-git-send-email-suravee.suthikulpanit@amd.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The normal x86_topology on NHM+ machines degenerates because the MC and CPU domains are of the same size, therefore MC inherits SD_PREFER_SIBLING from CPU (which then gets taken out). The result is that we'll spread tasks across the first NUMA level in order to maximize cache utilization. However, for the x86_numa_in_package_topology we loose the CPU domain, and we'll not have SD_PREFER_SIBLING set anywhere, giving a distinct difference in behaviour. Commit: 8e7fbcbc ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs") made a fail by not preserving the SD_PREFER_SIBLING for the !power_saving case on both CPU and MC. Then commit: 6956dc56 ("sched/numa: Add SD_PERFER_SIBLING to CPU domain") adds it back to the CPU but not MC. Restore that now, such that we get consistent spreading behaviour wrt L3 and NUMA. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
luca abeni authored
Ask the compiler to use a single bit for storing true / false values, instead of wasting the size of a whole int value. Tested with gcc 5.4.0 on x86_64, and the compiler produces the expected Assembly (similar to the Assembly code generated when explicitly accessing the bits with bitmasks, "&" and "|"). Signed-off-by:
luca abeni <luca.abeni@santannapisa.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504778971-13573-5-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
__dl_sub() is more meaningful as a name, and is more consistent with the naming of the dual function (__dl_add()). Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Luca Abeni <luca.abeni@santannapisa.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Luca Abeni authored
Fix a bug introduced in: 72f9f3fd ("sched/deadline: Remove dl_new from struct sched_dl_entity") After that commit, when switching to -deadline if the scheduling deadline of a task is in the past then switched_to_dl() calls setup_new_entity() to properly initialize the scheduling deadline and runtime. The problem is that the task is enqueued _before_ having its parameters initialized by setup_new_entity(), and this can cause problems. For example, a task with its out-of-date deadline in the past will potentially be enqueued as the highest priority one; however, its adjusted deadline may not be the earliest one. This patch fixes the problem by initializing the task's parameters before enqueuing it. Signed-off-by:
luca abeni <luca.abeni@santannapisa.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
luca abeni authored
Signed-off-by:
luca abeni <luca.abeni@santannapisa.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1504778971-13573-2-git-send-email-luca.abeni@santannapisa.it Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Steve requested better names for the new task-state helper functions. So introduce the concept of task-state index for the printing and rename __get_task_state() to task_state_index() and __task_state_to_char() to task_index_to_char(). Requested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.net Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
quiet_vmstat() is an expensive function that only makes sense when we go into NOHZ. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: aubrey.li@linux.intel.com Cc: cl@linux.com Cc: fweisbec@gmail.com Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
While load_balance() masks the source CPUs against active_mask, it had a hole against the destination CPU. Ensure the destination CPU is also part of the 'domain-mask & active-mask' set. Reported-by:
Levin, Alexander (Sasha Levin) <alexander.levin@verizon.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 77d1dfda ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds") Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The trivial wake_affine_idle() implementation is very good for a number of workloads, but it comes apart at the moment there are no idle CPUs left, IOW. the overloaded case. hackbench: NO_WA_WEIGHT WA_WEIGHT hackbench-20 : 7.362717561 seconds 6.450509391 seconds (win) netperf: NO_WA_WEIGHT WA_WEIGHT TCP_SENDFILE-1 : Avg: 54524.6 Avg: 52224.3 TCP_SENDFILE-10 : Avg: 48185.2 Avg: 46504.3 TCP_SENDFILE-20 : Avg: 29031.2 Avg: 28610.3 TCP_SENDFILE-40 : Avg: 9819.72 Avg: 9253.12 TCP_SENDFILE-80 : Avg: 5355.3 Avg: 4687.4 TCP_STREAM-1 : Avg: 41448.3 Avg: 42254 TCP_STREAM-10 : Avg: 24123.2 Avg: 25847.9 TCP_STREAM-20 : Avg: 15834.5 Avg: 18374.4 TCP_STREAM-40 : Avg: 5583.91 Avg: 5599.57 TCP_STREAM-80 : Avg: 2329.66 Avg: 2726.41 TCP_RR-1 : Avg: 80473.5 Avg: 82638.8 TCP_RR-10 : Avg: 72660.5 Avg: 73265.1 TCP_RR-20 : Avg: 52607.1 Avg: 52634.5 TCP_RR-40 : Avg: 57199.2 Avg: 56302.3 TCP_RR-80 : Avg: 25330.3 Avg: 26867.9 UDP_RR-1 : Avg: 108266 Avg: 107844 UDP_RR-10 : Avg: 95480 Avg: 95245.2 UDP_RR-20 : Avg: 68770.8 Avg: 68673.7 UDP_RR-40 : Avg: 76231 Avg: 75419.1 UDP_RR-80 : Avg: 34578.3 Avg: 35639.1 UDP_STREAM-1 : Avg: 64684.3 Avg: 66606 UDP_STREAM-10 : Avg: 52701.2 Avg: 52959.5 UDP_STREAM-20 : Avg: 30376.4 Avg: 29704 UDP_STREAM-40 : Avg: 15685.8 Avg: 15266.5 UDP_STREAM-80 : Avg: 8415.13 Avg: 7388.97 (wins and losses) sysbench: NO_WA_WEIGHT WA_WEIGHT sysbench-mysql-2 : 2135.17 per sec. 2142.51 per sec. sysbench-mysql-5 : 4809.68 per sec. 4800.19 per sec. sysbench-mysql-10 : 9158.59 per sec. 9157.05 per sec. sysbench-mysql-20 : 14570.70 per sec. 14543.55 per sec. sysbench-mysql-40 : 22130.56 per sec. 22184.82 per sec. sysbench-mysql-80 : 20995.56 per sec. 21904.18 per sec. sysbench-psql-2 : 1679.58 per sec. 1705.06 per sec. sysbench-psql-5 : 3797.69 per sec. 3879.93 per sec. sysbench-psql-10 : 7253.22 per sec. 7258.06 per sec. sysbench-psql-20 : 11166.75 per sec. 11220.00 per sec. sysbench-psql-40 : 17277.28 per sec. 17359.78 per sec. sysbench-psql-80 : 17112.44 per sec. 17221.16 per sec. (increase on the top end) tbench: NO_WA_WEIGHT Throughput 685.211 MB/sec 2 clients 2 procs max_latency=0.123 ms Throughput 1596.64 MB/sec 5 clients 5 procs max_latency=0.119 ms Throughput 2985.47 MB/sec 10 clients 10 procs max_latency=0.262 ms Throughput 4521.15 MB/sec 20 clients 20 procs max_latency=0.506 ms Throughput 9438.1 MB/sec 40 clients 40 procs max_latency=2.052 ms Throughput 8210.5 MB/sec 80 clients 80 procs max_latency=8.310 ms WA_WEIGHT Throughput 697.292 MB/sec 2 clients 2 procs max_latency=0.127 ms Throughput 1596.48 MB/sec 5 clients 5 procs max_latency=0.080 ms Throughput 2975.22 MB/sec 10 clients 10 procs max_latency=0.254 ms Throughput 4575.14 MB/sec 20 clients 20 procs max_latency=0.502 ms Throughput 9468.65 MB/sec 40 clients 40 procs max_latency=2.069 ms Throughput 8631.73 MB/sec 80 clients 80 procs max_latency=8.605 ms (increase on the top end) Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rik van Riel <riel@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Eric reported a sysbench regression against commit: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()") Similarly, Rik was looking at the NAS-lu.C benchmark, which regressed against his v3.10 enterprise kernel. PRE (current tip/master): ivb-ep sysbench: 2: [30 secs] transactions: 64110 (2136.94 per sec.) 5: [30 secs] transactions: 143644 (4787.99 per sec.) 10: [30 secs] transactions: 274298 (9142.93 per sec.) 20: [30 secs] transactions: 418683 (13955.45 per sec.) 40: [30 secs] transactions: 320731 (10690.15 per sec.) 80: [30 secs] transactions: 355096 (11834.28 per sec.) hsw-ex NAS: OMP_PROC_BIND/lu.C.x_threads_144_run_1.log: Time in seconds = 18.01 OMP_PROC_BIND/lu.C.x_threads_144_run_2.log: Time in seconds = 17.89 OMP_PROC_BIND/lu.C.x_threads_144_run_3.log: Time in seconds = 17.93 lu.C.x_threads_144_run_1.log: Time in seconds = 434.68 lu.C.x_threads_144_run_2.log: Time in seconds = 405.36 lu.C.x_threads_144_run_3.log: Time in seconds = 433.83 POST (+patch): ivb-ep sysbench: 2: [30 secs] transactions: 64494 (2149.75 per sec.) 5: [30 secs] transactions: 145114 (4836.99 per sec.) 10: [30 secs] transactions: 278311 (9276.69 per sec.) 20: [30 secs] transactions: 437169 (14571.60 per sec.) 40: [30 secs] transactions: 669837 (22326.73 per sec.) 80: [30 secs] transactions: 631739 (21055.88 per sec.) hsw-ex NAS: lu.C.x_threads_144_run_1.log: Time in seconds = 23.36 lu.C.x_threads_144_run_2.log: Time in seconds = 22.96 lu.C.x_threads_144_run_3.log: Time in seconds = 22.52 This patch takes out all the shiny wake_affine() stuff and goes back to utter basics. Between the two CPUs involved with the wakeup (the CPU doing the wakeup and the CPU we ran on previously) pick the CPU we can run on _now_. This restores much of the regressions against the older kernels, but leaves some ground in the overloaded case. The default-enabled WA_WEIGHT (which will be introduced in the next patch) is an attempt to address the overloaded situation. Reported-by:
Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jinpuwang@gmail.com Cc: vcaputo@pengaru.com Fixes: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()") Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Linus Torvalds authored
Merge powerpc transactional memory fixes from Michael Ellerman: "I figured I'd still send you the commits using a bundle to make sure it works in case I need to do it again in future" This fixes transactional memory state restore for powerpc. * bundle'd patches from Michael Ellerman: powerpc/tm: Fix illegal TM state in signal handler powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix object leak on IPSEC offload failure, from Steffen Klassert. 2) Fix range checks in ipset address range addition operations, from Jozsef Kadlecsik. 3) Fix pernet ops unregistration order in ipset, from Florian Westphal. 4) Add missing netlink attribute policy for nl80211 packet pattern attrs, from Peng Xu. 5) Fix PPP device destruction race, from Guillaume Nault. 6) Write marks get lost when BPF verifier processes R1=R2 register assignments, causing incorrect liveness information and less state pruning. Fix from Alexei Starovoitov. 7) Fix blockhole routes so that they are marked dead and therefore not cached in sockets, otherwise IPSEC stops working. From Steffen Klassert. 8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan net: thunderx: mark expected switch fall-throughs in nicvf_main() udp: fix bcast packet reception netlink: do not set cb_running if dump's start() errs ipv4: Fix traffic triggered IPsec connections. ipv6: Fix traffic triggered IPsec connections. ixgbe: incorrect XDP ring accounting in ethtool tx_frame param net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag Revert commit 1a8b6d76 ("net:add one common config...") ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register ixgbe: Return error when getting PHY address if PHY access is not supported netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1' netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook tipc: Unclone message at secondary destination lookup tipc: correct initialization of skb list gso: fix payload length when gso_size is zero mlxsw: spectrum_router: Avoid expensive lookup during route removal bpf: fix liveness marking doc: Fix typo "8023.ad" in bonding documentation ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real ...
-
Aleksander Morgado authored
The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback. This module allows switching to different USB profiles with the 'AT+UUSBCONF' command, and provides a ECM network interface when the 'AT+UUSBCONF=2' profile is selected. The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB configuration includes a ECM network interface. Both these modules are controlled via AT commands through one of the TTYs exposed. Connecting these modules may be done just by activating the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP on the ECM interface. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include: stable fixes: - nfs/filelayout: fix oops when freeing filelayout segment - NFS: Fix uninitialized rpc_wait_queue bugfixes: - NFSv4/pnfs: Fix an infinite layoutget loop - nfs: RPC_MAX_AUTH_SIZE is in bytes" * tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4/pnfs: Fix an infinite layoutget loop nfs/filelayout: fix oops when freeing filelayout segment sunrpc: remove redundant initialization of sock NFS: Fix uninitialized rpc_wait_queue NFS: Cleanup error handling in nfs_idmap_request_key() nfs: RPC_MAX_AUTH_SIZE is in bytes
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Robert Richter <rric@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim Fedorenko. 2) Fix splat with mark restoration in xt_socket with non-full-sock, patch from Subash Abhinov Kasiviswanathan. 3) ipset bogusly bails out when adding IPv4 range containing more than 2^31 addresses, from Jozsef Kadlecsik. 4) Incorrect pernet unregistration order in ipset, from Florian Westphal. 5) Races between dump and swap in ipset results in BUG_ON splats, from Ross Lagerwall. 6) Fix chain renames in nf_tables, from JingPiao Chen. 7) Fix race in pernet codepath with ebtables table registration, from Artem Savkov. 8) Memory leak in error path in set name allocation in nf_tables, patch from Arvind Yadav. 9) Don't dump chain counters if they are not available, this fixes a crash when listing the ruleset. 10) Fix out of bound memory read in strlcpy() in x_tables compat code, from Eric Dumazet. 11) Make sure we only process TCP packets in SYNPROXY hooks, patch from Lin Zhang. 12) Cannot load rules incrementally anymore after xt_bpf with pinned objects, added in revision 1. From Shmulik Ladkani. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-10-09 This series contains updates to ixgbe and arch/Kconfig. Mark fixes a case where PHY register access is not supported and we were returning a PHY address, when we should have been returning -EOPNOTSUPP. Sabrina Dubroca fixes the use of a logical "and" when it should have been the bitwise "and" operator. Ding Tianhong reverts the commit that added the Kconfig bool option ARCH_WANT_RELAX_ORDER, since there is now a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING that has been added to indicate that Relaxed Ordering Attributes should not be used for Transaction Layer Packets. Then follows up with making the needed changes to ixgbe to use the new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag. John Fastabend fixes an issue in the ring accounting when the transmit ring parameters are changed via ethtool when an XDP program is attached. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The commit bc044e8d ("udp: perform source validation for mcast early demux") does not take into account that broadcast packets lands in the same code path and they need different checks for the source address - notably, zero source address are valid for bcast and invalid for mcast. As a result, 2nd and later broadcast packets with 0 source address landing to the same socket are dropped. This breaks dhcp servers. Since we don't have stringent performance requirements for ingress broadcast traffic, fix it by disabling UDP early demux such traffic. Reported-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: bc044e8d ("udp: perform source validation for mcast early demux") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
It turns out that multiple places can call netlink_dump(), which means it's still possible to dereference partially initialized values in dump() that were the result of a faulty returned start(). This fixes the issue by calling start() _before_ setting cb_running to true, so that there's no chance at all of hitting the dump() function through any indirect paths. It also moves the call to start() to be when the mutex is held. This has the nice side effect of serializing invocations to start(), which is likely desirable anyway. It also prevents any possible other races that might come out of this logic. In testing this with several different pieces of tricky code to trigger these issues, this commit fixes all avenues that I'm aware of. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2017-10-09 The QCA folks found another netlink problem - we were missing validation of some attributes. It's not super problematic since one can only read a few bytes beyond the message (and that memory must exist), but here's the fix for it. I thought perhaps we can make nla_parse_nested() require a policy, but given the two-stage validation/parsing in regular netlink that won't work. Please pull and let me know if there's any problem. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-10-09 1) Fix some error paths of the IPsec offloading API. 2) Fix a NULL pointer dereference when IPsec is used with vti. From Alexey Kodanev. 3) Don't call xfrm_policy_cache_flush under xfrm_state_lock, it triggers several locking warnings. From Artem Savkov. Please pull or let me know if there are problems. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
A recent patch removed the dst_free() on the allocated dst_entry in ipv4_blackhole_route(). The dst_free() marked the dst_entry as dead and added it to the gc list. I.e. it was setup for a one time usage. As a result we may now have a blackhole route cached at a socket on some IPsec scenarios. This makes the connection unusable. Fix this by marking the dst_entry directly at allocation time as 'dead', so it is used only once. Fixes: b838d5e1 ("ipv4: mark DST_NOGC and remove the operation of dst_free()") Reported-by:
Tobias Brunner <tobias@strongswan.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
A recent patch removed the dst_free() on the allocated dst_entry in ipv6_blackhole_route(). The dst_free() marked the dst_entry as dead and added it to the gc list. I.e. it was setup for a one time usage. As a result we may now have a blackhole route cached at a socket on some IPsec scenarios. This makes the connection unusable. Fix this by marking the dst_entry directly at allocation time as 'dead', so it is used only once. Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of dst_free()") Reported-by:
Tobias Brunner <tobias@strongswan.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Oct 09, 2017
-
-
John Fastabend authored
Changing the TX ring parameters with an XDP program attached may cause the XDP queues to be cleared and the TX rings to be incorrectly configured. Fix by doing correct ring accounting in setup call. Fixes: 33fdc82f ("ixgbe: add support for XDP_TX action") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ding Tianhong authored
The ixgbe driver use the compile check to determine if it can send TLPs to Root Port with the Relaxed Ordering Attribute set, this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to the kernel and we could check the bit4 in the PCIe Device Control register to determine whether we should use the Relaxed Ordering Attributes or not, so use this new way in the ixgbe driver. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Acked-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ding Tianhong authored
The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to indicate that Relaxed Ordering Attributes (RO) should not be used for Transaction Layer Packets (TLP) targeted toward these affected Root Port, it will clear the bit4 in the PCIe Device Control register, so the PCIe device drivers could query PCIe configuration space to determine if it can send TLPs to Root Port with the Relaxed Ordering Attributes set. With this new flag we don't need the config ARCH_WANT_RELAX_ORDER to control the Relaxed Ordering Attributes for the ixgbe drivers just like the commit 1a8b6d76 ("net:add one common config...") did, so revert this commit. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sabrina Dubroca authored
In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register and then try to mask some bits out of the value, using the logical instead of bitwise and operator. Fixes: a21d0822 ("ixgbe: add support for geneve Rx offload") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-