Commit cd7764fe ("KVM: x86: latch INITs while in system management mode")
changed code to latch INIT while vCPU is in SMM and process latched INIT
when leaving SMM. It left a subtle remark in commit message that similar
treatment should also be done while vCPU is in VMX non-root-mode.

However, INIT signals should actually be latched in various vCPU states:
(*) For both Intel and AMD, INIT signals should be latched while vCPU
is in SMM.
(*) For Intel, INIT should also be latched while vCPU is in VMX
operation and later processed when vCPU leaves VMX operation by
executing VMXOFF.
(*) For AMD, INIT should also be latched while vCPU runs with GIF=0
or in guest-mode with intercept defined on INIT signal.

To fix this:
1) Add kvm_x86_ops->apic_init_signal_blocked() such that each CPU vendor
can define the various CPU states in which INIT signals should be
blocked and modify kvm_apic_accept_events() to use it.
2) Modify vmx_check_nested_events() to check for pending INIT signal
while vCPU in guest-mode. If so, emualte vmexit on
EXIT_REASON_INIT_SIGNAL. Note that nSVM should have similar behaviour
but is currently left as a TODO comment to implement in the future
because nSVM don't yet implement svm_check_nested_events().

Note: Currently KVM nVMX implementation don't support VMX wait-for-SIPI
activity state as specified in MSR_IA32_VMX_MISC bits 6:8 exposed to
guest (See nested_vmx_setup_ctls_msrs()).
If and when support for this activity state will be implemented,
kvm_check_nested_events() would need to avoid emulating vmexit on
INIT signal in case activity-state is wait-for-SIPI. In addition,
kvm_apic_accept_events() would need to be modified to avoid discarding
SIPI in case VMX activity-state is wait-for-SIPI but instead delay
SIPI processing to vmx_check_nested_events() that would clear
pending APIC events and emulate vmexit on SIPI.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Co-developed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

According to Intel SDM section 25.2 "Other Causes of VM Exits",
When INIT signal is received on a CPU that is running in VMX
non-root mode it should cause an exit with exit-reason of 3.
(See Intel SDM Appendix C "VMX BASIC EXIT REASONS")

This patch introduce the exit-reason definition.

Reviewed-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Co-developed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

* More selftests
* Improved KVM_S390_MEM_OP ioctl input checking
* Add kvm_valid_regs and kvm_dirty_regs invalid bit checking

The hrtimer which is used to emulate lapic timer is stopped during
vcpu reset, preemption timer should do the same.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch optimizes the virtual IPI emulation sequence:

write ICR2                     write ICR2
write ICR                      read ICR2
read ICR            ==>        send virtual IPI
read ICR2                      write ICR
send virtual IPI

It can reduce kvm-unit-tests/vmexit.flat IPI testing latency(from sender
send IPI to sender receive the ACK) from 3319 cycles to 3203 cycles on
SKylake server.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On AMD processors, in PAE 32bit mode, nested KVM instances don't
work. The L0 host get a kernel OOPS, which is related to
arch.mmu->pae_root being NULL.

The reason for this is that when setting up nested KVM instance,
arch.mmu is set to &arch.guest_mmu (while normally, it would be
&arch.root_mmu). However, the initialization and allocation of
pae_root only creates it in root_mmu. KVM code (ie. in
mmu_alloc_shadow_roots) then accesses arch.mmu->pae_root, which is the
unallocated arch.guest_mmu->pae_root.

This fix just allocates (and frees) pae_root in both guest_mmu and
root_mmu (and also lm_root if it was allocated). The allocation is
subject to previous restrictions ie. it won't allocate anything on
64-bit and AFAIK not on Intel.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=203923


Fixes: 14c07ad8 ("x86/kvm/mmu: introduce guest_mmu")
Signed-off-by: Jiri Palecek <jpalecek@web.de>
Tested-by: Jiri Palecek <jpalecek@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

x86_emulate_instruction() takes into account ctxt->have_exception flag
during instruction decoding, but in practice this flag is never set in
x86_decode_insn().

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

inject_emulated_exception() returns true if and only if nested page
fault happens. However, page fault can come from guest page tables
walk, either nested or not nested. In both cases we should stop an
attempt to read under RIP and give guest to step over its own page
fault handler.

This is also visible when an emulated instruction causes a #GP fault
and the VMware backdoor is enabled.  To handle the VMware backdoor,
KVM intercepts #GP faults; with only the next patch applied,
x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE.   EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it
thinks emulation failed due to a non-VMware opcode.  This patch prevents
the issue as x86_emulate_instruction() will return EMULATE_DONE after
injecting the #GP.

Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use the recently added tracepoint for logging nested VM-Enter failures
instead of spamming the kernel log when hardware detects a consistency
check failure.  Take the opportunity to print the name of the error code
instead of dumping the raw hex number, but limit the symbol table to
error codes that can reasonably be encountered by KVM.

Add an equivalent tracepoint in nested_vmx_check_vmentry_hw(), e.g. so
that tracing of "invalid control field" errors isn't suppressed when
nested early checks are enabled.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Debugging a failed VM-Enter is often like searching for a needle in a
haystack, e.g. there are over 80 consistency checks that funnel into
the "invalid control field" error code.  One way to expedite debug is
to run the buggy code as an L1 guest under KVM (and pray that the
failing check is detected by KVM).  However, extracting useful debug
information out of L0 KVM requires attaching a debugger to KVM and/or
modifying the source, e.g. to log which check is failing.

Make life a little less painful for VMM developers and add a tracepoint
for failed VM-Enter consistency checks.  Ideally the tracepoint would
capture both what check failed and precisely why it failed, but logging
why a checked failed is difficult to do in a generic tracepoint without
resorting to invasive techniques, e.g. generating a custom string on
failure.  That being said, for the vast majority of VM-Enter failures
the most difficult step is figuring out exactly what to look at, e.g.
figuring out which bit was incorrectly set in a control field is usually
not too painful once the guilty field as been identified.

To reach a happy medium between precision and ease of use, simply log
the code that detected a failed check, using a macro to execute the
check and log the trace event on failure.  This approach enables tracing
arbitrary code, e.g. it's not limited to function calls or specific
formats of checks, and the changes to the existing code are minimally
invasive.  A macro with a two-character name is desirable as usage of
the macro doesn't result in overly long lines or confusing alignment,
while still retaining some amount of readability.  I.e. a one-character
name is a little too terse, and a three-character name results in the
contents being passed to the macro aligning with an indented line when
the macro is used an in if-statement, e.g.:

        if (VCC(nested_vmx_check_long_line_one(...) &&
                nested_vmx_check_long_line_two(...)))
                return -EINVAL;

And that is the story of how the CC(), a.k.a. Consistency Check, macro
got its name.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We refactored this code a bit and accidentally deleted the "-" character
from "-EINVAL".  The kvm_vcpu_map() function never returns positive
EINVAL.

Fixes: c8e16b78 ("x86: KVM: svm: eliminate hardcoded RIP advancement from vmrun_interception()")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Receiving an unexpected exit reason from hardware should be considered
as a severe bug in KVM. Therefore, instead of just injecting #UD to
guest and ignore it, exit to userspace on internal error so that
it could handle it properly (probably by terminating guest).

In addition, prefer to use vcpu_unimpl() instead of WARN_ONCE()
as handling unexpected exit reason should be a rare unexpected
event (that was expected to never happen) and we prefer to print
a message on it every time it occurs to guest.

Furthermore, dump VMCS/VMCB to dmesg to assist diagnosing such cases.

Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move RDMSR and WRMSR emulation into common x86 code to consolidate
nearly identical SVM and VMX code.

Note, consolidating RDMSR introduces an extra indirect call, i.e.
retpoline, due to reaching {svm,vmx}_get_msr() via kvm_x86_ops, but a
guest kernel likely has bigger problems if increasing the latency of
RDMSR VM-Exits by ~70 cycles has a measurable impact on overall VM
performance.  E.g. the only recurring RDMSR VM-Exits (after booting) on
my system running Linux 5.2 in the guest are for MSR_IA32_TSC_ADJUST via
arch_cpu_idle_enter().

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Refactor the top-level MSR accessors to take/return the index and value
directly instead of requiring the caller to dump them into a msr_data
struct.

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Userspace can use ioctl KVM_SET_MSRS to update a set of MSRs of guest.
This ioctl set specified MSRs one by one. If it fails to set an MSR,
e.g., due to setting reserved bits, the MSR is not supported/emulated by
KVM, etc..., it stops processing the MSR list and returns the number of
MSRs have been set successfully.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The PLE window tracepoint triggers even if the window is not changed,
and the wording can be a bit confusing too.  One example line:

  kvm_ple_window: vcpu 0: ple_window 4096 (shrink 4096)

It easily let people think of "the window now is 4096 which is
shrinked", but the truth is the value actually didn't change (4096).

Let's only dump this message if the value really changed, and we make
the message even simpler like:

  kvm_ple_window: vcpu 4 old 4096 new 8192 (growed)

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The VMX ple_window is 32 bits wide, so logically it can overflow with
an int.  The module parameter is declared as unsigned int which is
good, however the dynamic variable is not.  Switching all the
ple_window references to use unsigned int.

The tracepoint changes will also affect SVM, but SVM is using an even
smaller width (16 bits) so it's always fine.

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It's done by TP_printk() already.

Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Tracing the ID helps to pair vmenters and vmexits for guests with
multiple vCPUs.

Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/arm updates for 5.4

- New ITS translation cache
- Allow up to 512 CPUs to be supported with GICv3 (for real this time)
- Now call kvm_arch_vcpu_blocking early in the blocking sequence
- Tidy-up device mappings in S2 when DIC is available
- Clean icache invalidation on VMID rollover
- General cleanup

Merge tag 'kvm-ppc-next-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

PPC KVM update for 5.4

- Some prep for extending the uses of the rmap array
- Various minor fixes
- Commits from the powerpc topic/ppc-kvm branch, which fix a problem
  with interrupts arriving after free_irq, causing host hangs and crashes.

Manually generate the PDPTR reserved bit mask when explicitly loading
PDPTRs.  The reserved bits that are being tracked by the MMU reflect the
current paging mode, which is unlikely to be PAE paging in the vast
majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation,
__set_sregs(), etc...  This can cause KVM to incorrectly signal a bad
PDPTR, or more likely, miss a reserved bit check and subsequently fail
a VM-Enter due to a bad VMCS.GUEST_PDPTR.

Add a one off helper to generate the reserved bits instead of sharing
code across the MMU's calculations and the PDPTR emulation.  The PDPTR
reserved bits are basically set in stone, and pushing a helper into
the MMU's calculation adds unnecessary complexity without improving
readability.

Oppurtunistically fix/update the comment for load_pdptrs().

Note, the buggy commit also introduced a deliberate functional change,
"Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was
effectively (and correctly) reverted by commit cd9ae5fe ("KVM: x86:
Fix page-tables reserved bits").  A bit of SDM archaeology shows that
the SDM from late 2008 had a bug (likely a copy+paste error) where it
listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved
for 2mb entries.  I.e. the SDM contradicted itself, and bits 6:5 are and
always have been reserved.

Fixes: 20c466b5 ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Reported-by: Doug Reiland <doug.reiland@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We can easily route hardware interrupts directly into VM context when
they target the "Fixed" or "LowPriority" delivery modes.

However, on modes such as "SMI" or "Init", we need to go via KVM code
to actually put the vCPU into a different mode of operation, so we can
not post the interrupt

Add code in the VMX and SVM PI logic to explicitly refuse to establish
posted mappings for advanced IRQ deliver modes. This reflects the logic
in __apic_accept_irq() which also only ever passes Fixed and LowPriority
interrupts as posted interrupts into the guest.

This fixes a bug I have with code which configures real hardware to
inject virtual SMIs into my guest.

Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.

One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.

Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:

  vcpu_id = 256 * vcpu2_index + vcpu_index

With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.

Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.

Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Now that we disallow invalid bits in kvm_valid_regs and kvm_dirty_regs
on s390x, too, we should also check this condition in the selftests.
The code has been taken from the x86-version of the sync_regs_test.

Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/lkml/20190904085200.29021-3-thuth@redhat.com/


Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

If unknown bits are set in kvm_valid_regs or kvm_dirty_regs, this
clearly indicates that something went wrong in the KVM userspace
application. The x86 variant of KVM already contains a check for
bad bits, so let's do the same on s390x now, too.

Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/lkml/20190904085200.29021-2-thuth@redhat.com/


Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com


Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

Explicitly specify the valid ranges for size and ar, and reword
buf requirements a bit.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20190829124746.28665-1-cohuck@redhat.com


Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

If the KVM_S390_MEM_OP ioctl is called with an access register >= 16,
then there is certainly a bug in the calling userspace application.
We check for wrong access registers, but only if the vCPU was already
in the access register mode before (i.e. the SIE block has recorded
it). The check is also buried somewhere deep in the calling chain (in
the function ar_translation()), so this is somewhat hard to find.

It's better to always report an error to the userspace in case this
field is set wrong, and it's safer in the KVM code if we block wrong
values here early instead of relying on a check somewhere deep down
the calling chain, so let's add another check to kvm_s390_guest_mem_op()
directly.

We also should check that the "size" is non-zero here (thanks to Janosch
Frank for the hint!). If we do not check the size, we could call vmalloc()
with this 0 value, and this will cause a kernel warning.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com


Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

Since commit 2f6ea23f ("arm64: KVM: Avoid marking pages as XN in
Stage-2 if CTR_EL0.DIC is set"), KVM has stopped marking normal memory
as execute-never at stage2 when the system supports D->I Coherency at
the PoU. This avoids KVM taking a trap when the page is first executed,
in order to clean it to PoU.

The patch that added this change also wrapped PAGE_S2_DEVICE mappings
up in this too. The upshot is, if your CPU caches support DIC ...
you can execute devices.

Revert the PAGE_S2_DEVICE change so PTE_S2_XN is always used
directly.

Fixes: 2f6ea23f ("arm64: KVM: Avoid marking pages as XN in Stage-2 if CTR_EL0.DIC is set")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

On POWER9, when userspace reads the value of the DPDES register on a
vCPU, it is possible for 0 to be returned although there is a doorbell
interrupt pending for the vCPU.  This can lead to a doorbell interrupt
being lost across migration.  If the guest kernel uses doorbell
interrupts for IPIs, then it could malfunction because of the lost
interrupt.

This happens because a newly-generated doorbell interrupt is signalled
by setting vcpu->arch.doorbell_request to 1; the DPDES value in
vcpu->arch.vcore->dpdes is not updated, because it can only be updated
when holding the vcpu mutex, in order to avoid races.

To fix this, we OR in vcpu->arch.doorbell_request when reading the
DPDES value.

Cc: stable@vger.kernel.org # v4.13+
Fixes: 57900694 ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>

When we are running multiple vcores on the same physical core, they
could be from different VMs and so it is possible that one of the
VMs could have its arch.mmu_ready flag cleared (for example by a
concurrent HPT resize) when we go to run it on a physical core.
We currently check the arch.mmu_ready flag for the primary vcore
but not the flags for the other vcores that will be run alongside
it.  This adds that check, and also a check when we select the
secondary vcores from the preempted vcores list.

Cc: stable@vger.kernel.org # v4.14+
Fixes: 38c53af8 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

There are some POWER9 machines where the OPAL firmware does not support
the OPAL_XIVE_GET_QUEUE_STATE and OPAL_XIVE_SET_QUEUE_STATE calls.
The impact of this is that a guest using XIVE natively will not be able
to be migrated successfully.  On the source side, the get_attr operation
on the KVM native device for the KVM_DEV_XIVE_GRP_EQ_CONFIG attribute
will fail; on the destination side, the set_attr operation for the same
attribute will fail.

This adds tests for the existence of the OPAL get/set queue state
functions, and if they are not supported, the XIVE-native KVM device
is not created and the KVM_CAP_PPC_IRQ_XIVE capability returns false.
Userspace can then either provide a software emulation of XIVE, or
else tell the guest that it does not have a XIVE controller available
to it.

Cc: stable@vger.kernel.org # v5.2+
Fixes: 3fab2d10 ("KVM: PPC: Book3S HV: XIVE: Activate XIVE exploitation mode")
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.

Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).

This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Detected by Coccinelle (and Will Deacon) using
scripts/coccinelle/misc/semicolon.cocci.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>

The rmap array in the guest memslot is an array of size number of guest
pages, allocated at memslot creation time. Each rmap entry in this array
is used to store information about the guest page to which it
corresponds. For example for a hpt guest it is used to store a lock bit,
rc bits, a present bit and the index of a hpt entry in the guest hpt
which maps this page. For a radix guest which is running nested guests
it is used to store a pointer to a linked list of nested rmap entries
which store the nested guest physical address which maps this guest
address and for which there is a pte in the shadow page table.

As there are currently two uses for the rmap array, and the potential
for this to expand to more in the future, define a type field (being the
top 8 bits of the rmap entry) to be used to define the type of the rmap
entry which is currently present and define two values for this field
for the two current uses of the rmap array.

Since the nested case uses the rmap entry to store a pointer, define
this type as having the two high bits set as is expected for a pointer.
Define the hpt entry type as having bit 56 set (bit 7 IBM bit ordering).

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Fix the error below triggered by `-Wimplicit-fallthrough`, by tagging
it as an expected fall-through.

    arch/powerpc/kvm/book3s_32_mmu.c: In function ‘kvmppc_mmu_book3s_32_xlate_pte’:
    arch/powerpc/kvm/book3s_32_mmu.c:241:21: error: this statement may fall through [-Werror=implicit-fallthrough=]
          pte->may_write = true;
          ~~~~~~~~~~~~~~~^~~~~~
    arch/powerpc/kvm/book3s_32_mmu.c:242:5: note: here
         case 3:
         ^~~~

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code.  To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Fix an incorrect/stale comment regarding the vmx_vcpu pointer, as guest
registers are now loaded using a direct pointer to the start of the
register array.

Opportunistically add a comment to document why the vmx_vcpu pointer is
needed, its consumption via 'call vmx_update_host_rsp' is rather subtle.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM implementations that wrap struct kvm_vcpu with a vendor specific
struct, e.g. struct vcpu_vmx, must place the vcpu member at offset 0,
otherwise the usercopy region intended to encompass struct kvm_vcpu_arch
will instead overlap random chunks of the vendor specific struct.
E.g. padding a large number of bytes before struct kvm_vcpu triggers
a usercopy warn when running with CONFIG_HARDENED_USERCOPY=y.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>