- Feb 12, 2014
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Ben Herrenschmidt: "Here is some powerpc goodness for -rc2. Arguably -rc1 material more than -rc2 but I was travelling (again !) It's mostly bug fixes including regressions, but there are a couple of new things that I decided to drop-in. One is a straightforward patch from Michael to add a bunch of P8 cache events to perf. The other one is a patch by myself to add the direct DMA (iommu bypass) for PCIe on Power8 for 64-bit capable devices. This has been around for a while, I had lost track of it. However it's been in our internal kernels we use for testing P8 already and it affects only P8 related code. Since P8 is still unreleased the risk is pretty much nil at this point" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powernv: Add iommu DMA bypass support for IODA2 powerpc: Fix endian issues in kexec and crash dump code powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP powerpc/xmon: Don't signal we've entered until we're finished printing powerpc/xmon: Fix timeout loop in get_output_lock() powerpc/xmon: Don't loop forever in get_output_lock() powerpc/perf: Configure BHRB filter before enabling PMU interrupts crypto/nx/nx-842: Fix handling of vmalloc addresses powerpc/pseries: Select ARCH_RANDOM on pseries powerpc/perf: Add Power8 cache & TLB events powerpc/relocate fix relocate processing in LE mode powerpc: Fix kdump hang issue on p8 with relocation on exception enabled. powerpc/pseries: Disable relocation on exception while going down during crash. powerpc/eeh: Drop taken reference to driver on eeh_rmv_device powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: - Fix compile error drivers/spi/spi-rspi.c with !CONFIG_OF - Fix warnings for unused/uninitialized variables with !CONFIG_OF - Fix PCIe bus matching for powerpc - Add documentation for various vendor strings * tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: DT: Add vendor prefix for Spansion Inc. of/device: Nullify match table in of_match_device() for CONFIG_OF=n dt-bindings: add vendor-prefix for neonode of: fix PCI bus match for PCIe slots of: restructure for_each macros to fix compile warnings of: add vendor prefix for Honeywell of: Update qcom vendor prefix description of: add vendor prefix for Allwinner Technology
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: - Fix two compilation issues - HZ, readq/writeq - Fix stack protection support * tag 'microblaze-3.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix a typo when disabling stack protection microblaze: Define readq and writeq IO helper function microblaze: Fix missing HZ macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 bugfixes from Martin Schwidefsky: "A collection a bug fixes. Most of them are minor but two of them are more severe. The linkage stack bug can be used by user space to force an oops, with panic_on_oops this is a denial-of-service. And the dump memory detection issue can cause incomplete memory dumps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: improve cio_commit_config s390: fix kernel crash due to linkage stack instructions s390/dump: Fix dump memory detection s390/appldata: restore missing init_virt_timer() s390/qdio: correct program-controlled interruption checking s390/qdio: for_each macro correctness
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: 1) Fix flexcan build on big endian, from Arnd Bergmann 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from non-sleepable contexts. From Or Gerlitz 4) vxlan_gro_receive() does not iterate over all possible flows properly, fix also from Or Gerlitz 5) CAN core doesn't use a proper SKB destructor when it hooks up sockets to SKBs. Fix from Oliver Hartkopp 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from Eric Dumazet 7) Fix address family assignment in IPVS, from Michal Kubecek 8) Fix ath9k build on ARM, from Sujith Manoharan 9) Make sure fail_over_mac only applies for the correct bonding modes, from Ding Tianhong 10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz 11) Handle gigabit features properly in generic PHY code, from Florian Fainelli 12) Don't blindly invoke link operations in rtnl_link_get_slave_info_data_size, they are optional. Fix from Fernando Luis Vazquez Cao 13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork 14) Handle netlink packet padding properly in openvswitch, from Thomas Graf 15) Fix oops when deleting chains in nf_tables, from Patrick McHardy 16) Fix RX stalls in xen-netback driver, from Zoltan Kiss 17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach 18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert Uytterhoeven 19) tg3_change_mtu() can deadlock, fix from Nithin Sujir 20) Fix regression in setting SCTP local source addresses on accepted sockets, caused by some generic ipv6 socket changes. Fix from Matija Glavinic Pecotic 21) IPPROTO_* must be pure defines, otherwise module aliases don't get constructed properly. Fix from Jan Moskyto 22) IPV6 netconsole setup doesn't work properly unless an explicit source address is specified, fix from Sabrina Dubroca 23) Use __GFP_NORETRY for high order skb page allocations in sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet 24) Fix a regression added in netconsole over bridging, from Cong Wang 25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive well with TCP pacing which needs the SRTT to be accurate. Fix from Eric Dumazet 26) Several cases of missing header file includes from Rashika Kheria 27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike 28) TCP Small Queues doesn't handle nonagle properly in some corner cases, fix from Eric Dumazet 29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding Tianhong 30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits) 6lowpan: fix lockdep splats alx: add missing stats_lock spinlock init 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers bonding: remove unwanted bond lock for enslave processing USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support tcp: tsq: fix nonagle handling bridge: Prevent possible race condition in br_fdb_change_mac_address bridge: Properly check if local fdb entry can be deleted when deleting vlan bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address bridge: Fix the way to check if a local fdb entry can be deleted bridge: Change local fdb entries whenever mac address of bridge device changes bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min net: vxge: Remove unused device pointer net: qmi_wwan: add ZTE MF667 3c59x: Remove unused pointer in vortex_eisa_cleanup() net: fix 'ip rule' iif/oif device rename ...
-
- Feb 11, 2014
-
-
Benjamin Herrenschmidt authored
This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Eric Dumazet authored
When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for bonding/l2tp/ppp in commits 0daa2303 ("[PATCH] bonding: lockdep annotation") 49ee4920 ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bf ("net: qdisc busylock needs lockdep annotations ") 303c07db ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ") Reported-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Greene authored
Trivial fix for init time stack trace occuring in alx_get_stats64 upon start up. Should have been part of commit adding the spinlock: f1b6b106 alx: add alx_get_stats64 operation Signed-off-by:
John Greene <jogreene@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Yao authored
The 9p-virtio transport does zero copy on things larger than 1024 bytes in size. It accomplishes this by returning the physical addresses of pages to the virtio-pci device. At present, the translation is usually a bit shift. That approach produces an invalid page address when we read/write to vmalloc buffers, such as those used for Linux kernel modules. Any attempt to load a Linux kernel module from 9p-virtio produces the following stack. [<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510 [<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0 [<ffffffff814839dd>] p9_client_read+0x15d/0x240 [<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0 [<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20 [<ffffffff811c84e7>] v9fs_file_read+0x37/0x70 [<ffffffff8114e3fb>] vfs_read+0x9b/0x160 [<ffffffff81153571>] kernel_read+0x41/0x60 [<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180 Subsequently, QEMU will die printing: qemu-system-x86_64: virtio: trying to map MMIO memory This patch enables 9p-virtio to correctly handle this case. This not only enables us to load Linux kernel modules off virtfs, but also enables ZFS file-based vdevs on virtfs to be used without killing QEMU. Special thanks to both Avi Kivity and Alexander Graf for their interpretation of QEMU backtraces. Without their guidence, tracking down this bug would have taken much longer. Also, special thanks to Linus Torvalds for his insightful explanation of why this should use is_vmalloc_addr() instead of is_vmalloc_or_module_addr(): https://lkml.org/lkml/2014/2/8/272 Signed-off-by:
Richard Yao <ryao@gentoo.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
dingtianhong authored
The bond enslave processing don't hold bond->lock anymore, so release an unlocked rw lock will cause warning message, remove the unwanted read_unlock(&bond->lock). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Acked-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Liu Junliang authored
Signed-off-by:
Liu Junliang <liujunliang_ljl@163.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
We expose a number of OF properties in the kexec and crash dump code and these need to be big endian. Cc: stable@vger.kernel.org # v3.13 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
We would allocate one specific exception stack for each kind of non-base exceptions for every CPU. For ppc32 the CPU hard ID is used as the subscript to get the specific exception stack for one CPU. But for an UP kernel, there is only one element in the each kind of exception stack array. We would get stuck if the CPU hard ID is not equal to '0'. So in this case we should use the subscript '0' no matter what the CPU hard ID is. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Currently we set our cpu's bit in cpus_in_xmon, and then we take the output lock and print the exception information. This can race with the master cpu entering the command loop and printing the backtrace. The result is that the backtrace gets garbled with another cpu's exception print out. Fix it by delaying the set of cpus_in_xmon until we are finished printing. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also skip the while loop because xmon_speaker != last_speaker (0) - meaning we skip the second cmpxchg() also. Following that code path the compiler sees no memory barriers and so is within its rights to never reload xmon_speaker. The end result is we loop forever. This manifests as all cpus being in xmon ('c' command), but they refuse to take control when you switch to them ('c x' for cpu # x). I have seen this deadlock in practice and also checked the generated code to confirm this is what's happening. The simplest fix is just to always try the cmpxchg(). Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anshuman Khandual authored
Right now the config_bhrb() PMU specific call happens after write_mmcr0(), which actually enables the PMU for event counting and interrupts. So there is a small window of time where the PMU and BHRB runs without the required HW branch filter (if any) enabled in BHRB. This can cause some of the branch samples to be collected through BHRB without any filter applied and hence affects the correctness of the results. This patch moves the BHRB config function call before enabling interrupts. Here are some data points captured via trace prints which depicts how we could get PMU interrupts with BHRB filter NOT enabled with a standard perf record command line (asking for branch record information as well). $ perf record -j any_call ls Before the patch:- ls-1962 [003] d... 2065.299590: .perf_event_interrupt: MMCRA: 40000000000 ls-1962 [003] d... 2065.299603: .perf_event_interrupt: MMCRA: 40000000000 ... All the PMU interrupts before this point did not have the requested HW branch filter enabled in the MMCRA. ls-1962 [003] d... 2065.299647: .perf_event_interrupt: MMCRA: 40040000000 ls-1962 [003] d... 2065.299662: .perf_event_interrupt: MMCRA: 40040000000 After the patch:- ls-1850 [008] d... 190.311828: .perf_event_interrupt: MMCRA: 40040000000 ls-1850 [008] d... 190.311848: .perf_event_interrupt: MMCRA: 40040000000 All the PMU interrupts have the requested HW BHRB branch filter enabled in MMCRA. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Fixed up whitespace and cleaned up changelog] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Nathan Fontenot authored
The powerpc specific nx-842 compression driver does not currently handle translating a vmalloc address to a physical address. The current driver uses __pa() for all addresses which does not properly handle vmalloc addresses and thus causes a failure since we do not pass a proper physical address to the hypervisor. This patch adds a routine to convert an address to a physical address by checking for vmalloc addresses and handling them properly. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> --- drivers/crypto/nx/nx-842.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
We have a driver for the ARCH_RANDOM hook in rng.c, so we should select ARCH_RANDOM on pseries. Without this the build breaks if you turn ARCH_RANDOM off. This hasn't broken the build because pseries_defconfig doesn't specify a value for PPC_POWERNV, which is default y, and selects ARCH_RANDOM. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Laurent Dufour authored
Relocation's code is not working in little endian mode because the r_info field, which is a 64 bits value, should be read from the right offset. The current code is optimized to read the r_info field as a 32 bits value starting at the middle of the double word (offset 12). When running in LE mode, the read value is not correct since only the MSB is read. This patch removes this optimization which consist to deal with a 32 bits value instead of a 64 bits one. This way it works in big and little endian mode. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mahesh Salgaonkar authored
On p8 systems, with relocation on exception feature enabled we are seeing kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this feature enabled, exception are raised with MMU (IR=DR=1) ON with the default offset of 0xc*4000. Since exception is raised in virtual mode it requires the vector region to be executable without which it fails to fetch and execute instruction at 0xc*4xxx. For default kernel since kernel is loaded at real 0, the htab mappings sets the entire kernel text region executable. But for relocatable kernel (e.g. kdump case) we only copy interrupt vectors down to real 0 and never marked that region as executable because in p7 and below we always get exception in real mode. This patch fixes this issue by marking htab mapping range as executable that overlaps with the interrupt vector region for relocatable kernel. Thanks to Ben who helped me to debug this issue and find the root cause. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mahesh Salgaonkar authored
Disable relocation on exception while going down even in kdump case. This is because we are about clear htab mappings while kexec-ing into kdump kernel and we may run into issues if we still have AIL ON. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thadeu Lima de Souza Cascardo authored
Commit f5c57710 ("powerpc/eeh: Use partial hotplug for EEH unaware drivers") introduces eeh_rmv_device, which may grab a reference to a driver, but not release it. That prevents a driver from being removed after it has gone through EEH recovery. This patch drops the reference if it was taken. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Paul Gortmaker authored
Commit 446f6d06 ("powerpc/mpic: Properly set default triggers") breaks the mpc7447_hpc_defconfig as follows: CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type': arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant Looking at the cpp output (gcc 4.7.3), I see: case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] | mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]: The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set for this platform, thus enabling the following: ------------------- #ifdef CONFIG_MPIC_WEIRD static u32 mpic_infos[][MPIC_IDX_END] = { [0] = { /* Original OpenPIC compatible MPIC */ [...] #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] #else /* CONFIG_MPIC_WEIRD */ #define MPIC_INFO(name) MPIC_##name #endif /* CONFIG_MPIC_WEIRD */ ------------------- Here we convert the case section to if/else if, and also add the equivalent of a default case to warn about unknown types. Boot tested on sbc8548, build tested on all defconfigs. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "A bunch of fixes" * emailed patches fron Andrew Morton <akpm@linux-foundation.org>: ocfs2: check existence of old dentry in ocfs2_link() ocfs2: update inode size after zeroing the hole ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size mm/memory-failure.c: move refcount only in !MF_COUNT_INCREASED smp.h: fix x86+cpu.c sparse warnings about arch nonboot CPU calls mm: fix page leak at nfs_symlink() slub: do not assert not having lock in removing freed partial gitignore: add all.config ocfs2: fix ocfs2_sync_file() if filesystem is readonly drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem xen: properly account for _PAGE_NUMA during xen pte translations mm/slub.c: list_lock may not be held in some circumstances drivers/md/bcache/extents.c: use %zi to format size_t vmcore: prevent PT_NOTE p_memsz overflow during header update drivers/message/i2o/i2o_config.c: fix deadlock in compat_ioctl(I2OGETIOPS) Documentation/: update 00-INDEX files checkpatch: fix detection of git repository get_maintainer: fix detection of git repository drivers/misc/sgi-gru/grukdump.c: unlocking should be conditional in gru_dump_context()
-
Xue jiufei authored
System call linkat first calls user_path_at(), check the existence of old dentry, and then calls vfs_link()->ocfs2_link() to do the actual work. There may exist a race when Node A create a hard link for file while node B rm it. Node A Node B user_path_at() ->ocfs2_lookup(), find old dentry exist rm file, add inode say inodeA to orphan_dir call ocfs2_link(),create a hard link for inodeA. rm the link, add inodeA to orphan_dir again When orphan_scan work start, it calls ocfs2_queue_orphans() to do the main work. It first tranverses entrys in orphan_dir, linking all inodes in this orphan_dir to a list look like this: inodeA->inodeB->...->inodeA When tranvering this list, it will fall into loop, calling iput() again and again. And finally trigger BUG_ON(inode->i_state & I_CLEAR). Signed-off-by:
joyce <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
fs-writeback will release the dirty pages without page lock whose offset are over inode size, the release happens at block_write_full_page_endio(). If not update, dirty pages in file holes may be released before flushed to the disk, then file holes will contain some non-zero data, this will cause sparse file md5sum error. To reproduce the bug, find a big sparse file with many holes, like vm image file, its actual size should be bigger than available mem size to make writeback work more frequently, tar it with -S option, then keep untar it and check its md5sum again and again until you get a wrong md5sum. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Younger Liu authored
The issue scenario is as following: - Create a small file and fallocate a large disk space for a file with FALLOC_FL_KEEP_SIZE option. - ftruncate the file back to the original size again. but the disk free space is not changed back. This is a real bug that be fixed in this patch. In order to solve the issue above, we modified ocfs2_setattr(), if attr->ia_size != i_size_read(inode), It calls ocfs2_truncate_file(), and truncate disk space to attr->ia_size. Signed-off-by:
Younger Liu <younger.liu@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Tested-by:
Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Sunil Mushran <sunil.mushran@gmail.com> Reviewed-by:
Jensen <shencanquan@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
mce-test detected a test failure when injecting error to a thp tail page. This is because we take page refcount of the tail page in madvise_hwpoison() while the fix in commit a3e0f9e4 ("mm/memory-failure.c: transfer page count from head page to tail page after split thp") assumes that we always take refcount on the head page. When a real memory error happens we take refcount on the head page where memory_failure() is called without MF_COUNT_INCREASED set, so it seems to me that testing memory error on thp tail page using madvise makes little sense. This patch cancels moving refcount in !MF_COUNT_INCREASED for valid testing. [akpm@linux-foundation.org: s/&&/&/] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: <stable@vger.kernel.org> [3.9+: a3e0f9e4 ] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
Use what we already do for arch_disable_smp_support() to fix these: arch/x86/kernel/smpboot.c:1155:6: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? arch/x86/kernel/smpboot.c:1160:6: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? kernel/cpu.c:512:13: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? kernel/cpu.c:516:13: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael Aquini authored
Changes in commit a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API") have introduced a call to add_to_page_cache_lru() which causes a leak in nfs_symlink() as now the page gets an extra refcount that is not dropped. Jan Stancek observed and reported the leak effect while running test8 from Connectathon Testsuite. After several iterations over the test case, which creates several symlinks on a NFS mountpoint, the test system was quickly getting into an out-of-memory scenario. This patch fixes the page leak by dropping that extra refcount add_to_page_cache_lru() is grabbing. Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: <stable@vger.kernel.org> [3.11.x+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt authored
Vladimir reported the following issue: Commit c65c1877 ("slub: use lockdep_assert_held") requires remove_partial() to be called with n->list_lock held, but free_partial() called from kmem_cache_close() on cache destruction does not follow this rule, leading to a warning: WARNING: CPU: 0 PID: 2787 at mm/slub.c:1536 __kmem_cache_shutdown+0x1b2/0x1f0() Modules linked in: CPU: 0 PID: 2787 Comm: modprobe Tainted: G W 3.14.0-rc1-mm1+ #1 Hardware name: 0000000000000600 ffff88003ae1dde8 ffffffff816d9583 0000000000000600 0000000000000000 ffff88003ae1de28 ffffffff8107c107 0000000000000000 ffff880037ab2b00 ffff88007c240d30 ffffea0001ee5280 ffffea0001ee52a0 Call Trace: __kmem_cache_shutdown+0x1b2/0x1f0 kmem_cache_destroy+0x43/0xf0 xfs_destroy_zones+0x103/0x110 [xfs] exit_xfs_fs+0x38/0x4e4 [xfs] SyS_delete_module+0x19a/0x1f0 system_call_fastpath+0x16/0x1b His solution was to add a spinlock in order to quiet lockdep. Although there would be no contention to adding the lock, that lock also requires disabling of interrupts which will have a larger impact on the system. Instead of adding a spinlock to a location where it is not needed for lockdep, make a __remove_partial() function that does not test if the list_lock is held, as no one should have it due to it being freed. Also added a __add_partial() function that does not do the lock validation either, as it is not needed for the creation of the cache. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vladimir Davydov <vdavydov@parallels.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Borislav Petkov authored
This is used by kbuild to load preset Kconfig options. We need to ignore it, otherwise git clean kills it. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Younger Liu authored
If filesystem is readonly, there is no need to flush drive's caches or force any uncommitted transactions. [akpm@linux-foundation.org: return -EROFS, not 0] Signed-off-by:
Younger Liu <younger.liucn@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Prarit Bhargava authored
If you do echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec the following stack trace is output because the edac module is not designed to poll with a timeout of zero. WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0() list_add corruption. prev->next should be next (ffff8808291dd1b8), but was (null). (prev=ffff8808286fe3f8). Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> __list_add+0xac/0xc0 __internal_add_timer+0xab/0x130 internal_add_timer+0x17/0x40 mod_timer_pinned+0xca/0x170 intel_pstate_timer_func+0x28a/0x380 call_timer_fn+0x36/0x100 run_timer_softirq+0x1ff/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 kernel BUG at kernel/timer.c:1084! invalid opcode: 0000 [#1] SMP Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> run_timer_softirq+0x245/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 RIP cascade+0x93/0xa0 WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0() Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Workqueue: edac-poller edac_mc_workq_function [edac_core] Call Trace: dump_stack+0x45/0x56 warn_slowpath_common+0x7d/0xa0 warn_slowpath_null+0x1a/0x20 __queue_delayed_work+0xed/0x1a0 queue_delayed_work_on+0x27/0x50 edac_mc_workq_function+0x72/0xa0 [edac_core] process_one_work+0x17b/0x460 worker_thread+0x11b/0x400 kthread+0xd2/0xf0 ret_from_fork+0x7c/0xb0 This patch adds a range check in the edac_mc_poll_msec code to check for 0. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Cong Wang <cwang@twopensource.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Steven Noonan forwarded a users report where they had a problem starting vsftpd on a Xen paravirtualized guest, with this in dmesg: BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067 page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x2ffc0000000014(referenced|dirty) addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74 CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1 Call Trace: dump_stack+0x45/0x56 print_bad_pte+0x22e/0x250 unmap_single_vma+0x583/0x890 unmap_vmas+0x65/0x90 exit_mmap+0xc5/0x170 mmput+0x65/0x100 do_exit+0x393/0x9e0 do_group_exit+0xcc/0x140 SyS_exit_group+0x14/0x20 system_call_fastpath+0x1a/0x1f Disabling lock debugging due to kernel taint BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1 BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1 The issue could not be reproduced under an HVM instance with the same kernel, so it appears to be exclusive to paravirtual Xen guests. He bisected the problem to commit 1667918b ("mm: numa: clear numa hinting information on mprotect") that was also included in 3.12-stable. The problem was related to how xen translates ptes because it was not accounting for the _PAGE_NUMA bit. This patch splits pte_present to add a pteval_present helper for use by xen so both bare metal and xen use the same code when checking if a PTE is present. [mgorman@suse.de: wrote changelog, proposed minor modifications] [akpm@linux-foundation.org: fix typo in comment] Reported-by:
Steven Noonan <steven@uplinklabs.net> Tested-by:
Steven Noonan <steven@uplinklabs.net> Signed-off-by:
Elena Ufimtseva <ufimtseva@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Commit c65c1877 ("slub: use lockdep_assert_held") incorrectly required that add_full() and remove_full() hold n->list_lock. The lock is only taken when kmem_cache_debug(s), since that's the only time it actually does anything. Require that the lock only be taken under such a condition. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
drivers/md/bcache/extents.c: In function `btree_ptr_bad_expensive': drivers/md/bcache/extents.c:196: warning: format `%li' expects type `long int', but argument 4 has type `size_t' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-