Commits · 3f90b82df110ef9cb33761b56ca85ae0d0372d4a · 方亚芬 / linux

Jun 27, 2013
- MIPS: tlbex: Fix size of area to be flushed. · 3f90b82d
  Ralf Baechle authored Jun 27, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
  3f90b82d
Jun 25, 2013

MIPS: Flush TLB handlers directly after writing them · a3d9086b

Jonas Gorski authored Jun 21, 2013



When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the
generated tlbmiss_handler_setup_pgd before it was committed to memory,
causing boot failures:

  trap_init()
   |- per_cpu_trap_init()
   |   |- TLBMISS_HANDLER_SETUP()
   |       |- tlbmiss_handler_setup_pgd()
   |- flush_tlb_handlers()

To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler()
right after they were generated. We can do this as the cache handling is
initialized just before creating the tlb handlers.

This issue was introduced in 3d8bfdd0
("MIPS: Use C0_KScratch (if present) to hold PGD pointer.").

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5539/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

a3d9086b

MIPS: SNI: pcit: Fix build error with CONFIG_PCI=n disabled. · 6a72015d

Ralf Baechle authored Jun 25, 2013

CC arch/mips/sni/pcit.o
arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

6a72015d

MIPS: SNI: pcimt: Guard sni_controller with CONFIG_PCI · 5bd80765

Markos Chandras authored Jun 24, 2013



Fixes the following build problem:

arch/mips/sni/pcimt.c:188:30: error: 'sni_controller'
defined but not used [-Werror=unused-variable]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5547/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5bd80765

MIPS: Sibyte: Platform: Add load address for CONFIG_SIBYTE_LITTLESUR · 0be0aea2

Markos Chandras authored Jun 25, 2013



Fixes the following build problem:
mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error

because VMLINUX_LOAD_ADDRESS was an empty string for that platform
so the vmlinux.lds.S created an invalid section entry on line 50.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5548/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

0be0aea2

Jun 22, 2013

MIPS: microMIPS: Fix POOL16C minor opcode enum · dfb033f0

Tony Wu authored Jun 20, 2013

As pointed out by Maciej, POOL16C minor opcodes were mostly shifted
by one bit. Correct those opcodes, and also add jraddiusp to the enum.

Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: david.daney@cavium.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5527/

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

dfb033f0

MIPS: Fix TLBR-use hazards for R2 cores in the TLB reload handlers · 73acc7df

Ralf Baechle authored Jun 20, 2013



MIPS R2 documents state that an execution hazard barrier is needed
after a TLBR before reading EntryLo.

Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5526/

73acc7df

MIPS: Fix rtlx build error. · b90b3802

Ralf Baechle authored May 07, 2013



  CC      arch/mips/kernel/rtlx.o
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable]
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors

Caused by 496ad9aa [new helper:
file_inode(file)].

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

b90b3802

WATCHDOG: sb_wdog: Fix 32 bit build failure · cd6cbde6

Ralf Baechle authored Jun 19, 2013



Fixes the following linking problem:
drivers/watchdog/sb_wdog.c:211: undefined reference to `__udivdi3'

This results from reading a 64 bit register, then dividing the value by
1000000.  For 32 bit kernels gcc will use the helper function __udivdi3
from libgcc which the kernel intentionally doesn't provide.

In the read registerbits 23..63 are always zero and only bits 0..22 are
signficant.  So a simple cast to truncate the read value to 32 bits
fixes the issue.

Reported and initial patch by Markos Chandras <markos.chandras@imgtec.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>

cd6cbde6

MIPS: BCM63XX: remove bogus Kconfig selects · 31888351

Florian Fainelli authored Jun 18, 2013



Remove the bogus selects on USB-related symbols for 6345 and 6338, not
only we do not yet support USB on BCM63XX, but they also cause the
following warnings:

warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
make[4]: Leaving directory `/home/florian/dev/linux'

Just get rid of these bogus Kconfig selects because neither 6345 nor
6338 actually have built-in USB host controllers.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: http://patchwork.linux-mips.org/patch/5497/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

31888351

MIPS: Fix execution hazard during watchpoint register probe · c5e1503f

Paul Burton authored Jun 15, 2013



Writing a value to a WatchLo* register creates an execution hazard, so
if its value is then read before that hazard is cleared then said value
may be invalid. The mips_probe_watch_registers function must therefore
clear the execution hazard between setting the match bits in a WatchLo*
register & reading the register back in order to check which are set.

This fixes intermittent incorrect watchpoint register probing on some
MIPS cores such as interAptiv & proAptiv.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/5474/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

c5e1503f

MIPS: powertv: Drop SYS_HAS_EARLY_PRINTK · c37441c1

Markos Chandras authored Jun 17, 2013



PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.

Fixes the following problem when EARLY_PRINTK is enabled for powertv:

arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

c37441c1

MIPS: sibyte: Amend dependencies for SIBYTE_BUS_WATCHER · 6793f55c

Markos Chandras authored Jun 17, 2013



SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X
or CONFIG_SIBYTE_SB1250 is selected according to the
arch/mips/sibyte/Makefile.
This fixes the following build problem:

arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher'

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5482/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

6793f55c

MIPS: Sibyte: Fix bus watcher build for BCM1x55 and BCM1x80. · ae5b0e09

Ralf Baechle authored Jun 19, 2013

CC arch/mips/sibyte/bcm1480/bus_watcher.o
CHK kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2

The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/

Reported-by: Markos Chandras <markos.chandras@imgtec.com>

ae5b0e09

MIPS: Sibyte: Fix build for SIBYTE_BW_TRACE on BCM1x55 and BCM1x80. · 55e9741a

Ralf Baechle authored Jun 19, 2013

CC arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1

This happens because 8deab114 [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/

55e9741a

MIPS: sibyte: Declare the cfe_write() buffer as constant · 39b6f3aa

Markos Chandras authored Jun 17, 2013



The write() prototype expects a const char * as argument so declare
it as such.

Fixes the following build problem:

arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

39b6f3aa

MIPS: Sibyte: Add missing sched.h header · 0156915c

Markos Chandras authored Jun 17, 2013



It's needed for the TASK_INTERRUPTIBLE definition.

Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)

[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

0156915c

MIPS: sibyte: Remove unused variable. · d6095cac

Markos Chandras authored Jun 17, 2013



Fixes the following build problem:

arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int':
arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf'
[-Werror=unused-variable]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5481/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

d6095cac

MIPS: ath79: Fix argument for the ap136_pc_init function · 970cb7b9

Markos Chandras authored Jun 17, 2013



ap136_pci_init expects a u8 pointer as an argument.

Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

970cb7b9

MIPS/OCTEON: Override default address space layout. · 9b1f812a

David Daney authored Jun 13, 2013



OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9b1f812a

MIPS: malta: Remove software reset defines from generic header. · b72d9a4e

Steven J. Hill authored Jun 13, 2013



Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

b72d9a4e

MIPS: malta: Move defines of reset registers and values. · 36a29af4

Steven J. Hill authored Jun 13, 2013



Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

36a29af4

MIPS: sead3: Fix ability to perform a soft reset. · 2ddbc4e2

Steven J. Hill authored Jun 13, 2013



The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2ddbc4e2

MIPS: Loongson: Fix random early boot hang · 2f963bfb

Aaro Koskinen authored Feb 19, 2013



Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge
device (CS5536 general purpose timer) for the timer interrupt. It starts
running early and is already enabled during the PCI configuration,
during which there is a small window in pci_read_base() when the register
access is temporarily disabled. If the timer interrupts at this point,
the system will hang. Fix this by adding a fixup that keeps the register
access always enabled.

The hang the patch fixes usually looks like this:

[    0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
[    0.848000] pci 0000:00:0e.0: reg 10: [io  0xb410-0xb417]
[    0.852000] pci 0000:00:0e.0: reg 14: [io  0xb000-0xb0ff]
[    0.856000] pci 0000:00:0e.0: reg 18: [io  0xb380-0xb3bf]
[   28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[   28.140000] Modules linked in:
[   28.140000] irq event stamp: 37965
[   28.140000] hardirqs last  enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c
[   28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c
[   28.140000] softirqs last  enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258
[   28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0
[   28.140000] Cpu 0
[   28.140000] $ 0   : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001
[   28.140000] $ 4   : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011
[   28.140000] $ 8   : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011
[   28.140000] $12   : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000
[   28.140000] $16   : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000
[   28.140000] $20   : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000
[   28.140000] $24   : 0000000000000d80 00000000fffedbe0
[   28.140000] $28   : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8
[   28.140000] Hi    : 0000000000d0fc00
[   28.140000] Lo    : 0000000000f82b40
[   28.140000] epc   : ffffffff8023810c __do_softirq+0xe4/0x258
[   28.140000]     Not tainted
[   28.140000] ra    : ffffffff802380f8 __do_softirq+0xd0/0x258
[   28.140000] Status: 140044e3    KX SX UX KERNEL EXL IE
[   28.140000] Cause : 10008400
[   28.140000] PrId  : 00006303 (ICT Loongson-2)

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4958/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2f963bfb

lib/Kconfig.debug: Restrict FRAME_POINTER for MIPS · 25c87eae

Markos Chandras authored Jun 11, 2013



FAULT_INJECTION_STACKTRACE_FILTER selects FRAME_POINTER but
that symbol is not available for MIPS.

Fixes the following problem on a randconfig:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP &&
 KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies
(DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN ||
MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS)

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5441/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

25c87eae

MIPS: Octeon: Don't clobber bootloader data structures. · d949b4fe

David Daney authored Jun 12, 2013



Commit abe77f90 (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself.  The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel.  Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.

The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

d949b4fe

MIPS: IP27: Fix build error if CONFIG_PCI=y and CONFIG_NUMA disabled. · 4f675e8a

Ralf Baechle authored Jun 13, 2013



Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:

  CC      arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4f675e8a

MIPS: IP27: Fix build errors with CONFIG_PCI disabled. · 73ec78b0

Ralf Baechle authored Jun 13, 2013



  LD      init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

73ec78b0

MIPS: IP27: Fix build errors with CONFIG_PCI disabled. · 8ea2b8b6

Ralf Baechle authored Jun 13, 2013



  LD      init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8ea2b8b6

MIPS: IP27: Fix build error with CONFIG_MAPPED_KERNEL · 28963b1e

Ralf Baechle authored Jun 13, 2013

Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather
complex and are no longer usable from assembler resulting in an
explosion like this:

AS arch/mips/kernel/head.o
arch/mips/kernel/head.S: Assembler messages:
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
make[2]: *** [arch/mips/kernel/head.o] Error 1

Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe
to hardcode the TLB bits there.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

28963b1e

MIPS: Move gas macro MAPPED_KERNEL_SETUP_TLB to IP27-specific code. · 23946ef1
Ralf Baechle authored Jun 13, 2013
```
It's IP27-specific and can only cause trouble in head.S.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
23946ef1

Jun 20, 2013

RAPIDIO: IDT_GEN2: Fix build error. · 27f62b9f

Ralf Baechle authored Jun 13, 2013

CC drivers/rapidio/switches/idt_gen2.o
drivers/rapidio/switches/idt_gen2.c: In function ‘idtg2_show_errlog’:
drivers/rapidio/switches/idt_gen2.c:379:30: error: ‘PAGE_SIZE’ undeclared (first use in this function)
drivers/rapidio/switches/idt_gen2.c:379:30: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>

27f62b9f

MIPS: Octeon: Fix build error if CONFIG_MTD=n · 68651ff6
Ralf Baechle authored Jun 13, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
68651ff6

Jun 18, 2013

MIPS: Octeon: Fix build error if CONFIG_BUG=n · 368b0625

David Daney authored Jun 20, 2013



  CC      init/do_mounts.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/linux/skbuff.h:33,
                 from include/linux/icmpv6.h:4,
                 from include/linux/ipv6.h:59,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:26,
                 from include/linux/nfs_fs.h:30,
                 from init/do_mounts.c:30:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
  LD      init/mounts.o
  CC      init/init_task.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/linux/skbuff.h:33,
                 from include/linux/netfilter.h:5,
                 from include/net/netns/netfilter.h:5,
                 from include/net/net_namespace.h:20,
                 from include/linux/init_task.h:14,
                 from init/init_task.c:1:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
  LD      init/built-in.o
  CC      arch/mips/cavium-octeon/setup.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
                 from include/linux/dma-mapping.h:76,
                 from include/asm-generic/pci-dma-compat.h:7,
                 from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129,
                 from include/linux/pci.h:1451,
                 from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12,
                 from arch/mips/cavium-octeon/setup.c:41:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1
make[1]: *** [arch/mips/cavium-octeon] Error 2
make: *** [arch/mips] Error 2

[ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.]

Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5519/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

368b0625

MIPS: Oceton: Fix build error. · 39205750

Ralf Baechle authored Jun 13, 2013

If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:

arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

39205750

MIPS: <uapi/asm/siginfo.h>: Don't reference CONFIG_* symbols. · c8d5c685
Ralf Baechle authored Jun 12, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
c8d5c685
MIPS: <uapi/asm/msgbuf.h>: Don't reference CONFIG_* symbols. · cfceb5e2
Ralf Baechle authored Jun 12, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
cfceb5e2
MIPS: <uapi/asm/swab.h>: Don't reference CONFIG_* symbols. · cfb9a4e7
Ralf Baechle authored Jun 12, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
cfb9a4e7
MIPS: <uapi/asm/resource.h: Don't reference CONFIG_* symbols. · f746caa3
Ralf Baechle authored Jun 12, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
f746caa3

Jun 13, 2013
- MIPS: <uapi/asm/fcntl.h>: Don't reference CONFIG_* symbols. · b8121f0f
  Ralf Baechle authored Jun 12, 2013
```
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
```
  b8121f0f