Pull jfs fix from David Kleikamp:
 "Another ACL regression. This one more subtle"

* tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy:
  jfs: set i_ctime when setting ACL

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for v3.14"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix use after free in jbd2_journal_start_reserved()
  ext4: don't leave i_crtime.tv_sec uninitialized
  ext4: fix online resize with a non-standard blocks per group setting
  ext4: fix online resize with very large inode tables
  ext4: don't try to modify s_flags if the the file system is read-only
  ext4: fix error paths in swap_inode_boot_loader()
  ext4: fix xfstest generic/299 block validity failures

If start_this_handle() fails then it leads to a use after free of
"handle".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Pull Ceph fixes from Sage Weil:
 "We have some patches fixing up ACL support issues from Zheng and
  Guangliang and a mount option to enable/disable this support.  (These
  fixes were somewhat delayed by the Chinese holiday.)

  There is also a small fix for cached readdir handling when directories
  are fragmented"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix __dcache_readdir()
  ceph: add acl, noacl options for cephfs mount
  ceph: make ceph_forget_all_cached_acls() static inline
  ceph: add missing init_acl() for mkdir() and atomic_open()
  ceph: fix ceph_set_acl()
  ceph: fix ceph_removexattr()
  ceph: remove xattr when null value is given to setxattr()
  ceph: properly handle XATTR_CREATE and XATTR_REPLACE

Pull CIFS fixes from Steve French:
 "Three cifs fixes, the most important fixing the problem with passing
  bogus pointers with writev (CVE-2014-0069).

  Two additional cifs fixes are still in review (including the fix for
  an append problem which Al also discovered)"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix too big maxBuf size for SMB3 mounts
  cifs: ensure that uncached writes handle unmapped areas correctly
  [CIFS] Fix cifsacl mounts over smb2 to not call cifs

When FS-Cache allocates an object, the following sequence of events can
occur:

 -->fscache_alloc_object()
    -->cachefiles_alloc_object() [via cache->ops->alloc_object]
    <--[returns new object]
    -->fscache_attach_object()
    <--[failed]
    -->cachefiles_put_object() [via cache->ops->put_object]
       -->fscache_object_destroy()
          -->fscache_objlist_remove()
             -->rb_erase() to remove the object from fscache_object_list.

resulting in a crash in the rbtree code.

The problem is that the object is only added to fscache_object_list on
the success path of fscache_attach_object() where it calls
fscache_objlist_add().

So if fscache_attach_object() fails, the object won't have been added to
the objlist rbtree.  We do, however, unconditionally try to remove the
object from the tree.

Thanks to NeilBrown for finding this and suggesting this solution.

Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: (a customer of) NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has been this way for years, and every time I stumble across it I
lose my lunch.  After coming across it for the nth time in the Coverity
results, I had to overcome the bystander effect and do something about
it.

This ignores the 79 column limit in favor of making it look like C
instead of gibberish.

The correct thing to do here would be to lose some of the indentation by
breaking this function up into several smaller ones.  I might do that at
some point if I have the stomach to look at this again.

(Also some of those overlong ternary operations would likely be more
readable as regular if's)

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-buf fix from Sumit Semwal:
 "Just some debugfs output updates.

  There's another patch related to dma-buf, but it'll get upstreamed via
  Greg KH's pull request"

* tag 'dma-buf-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
  dma-buf: update debugfs output

Pull AVR32 fixes from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: add generic vga.h to Kbuild
  avr32: add generic ioremap_wc() definition in io.h
  avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use
  avr32: fix missing module.h causing build failure in mimc200/fram.c

If directory is fragmented, readdir() read its dirfrags one by one.
After reading all dirfrags, the corresponding dentries are sorted in
(frag_t, off) order in the dcache. If dentries of a directory are all
cached, __dcache_readdir() can use the cached dentries to satisfy
readdir syscall. But when checking if a given dentry is after the
position of readdir, __dcache_readdir() compares numerical value of
frag_t directly. This is wrong, it should use ceph_frag_compare().

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

Make the 'acl' option dependent on having ACL support compiled in.  Make
the 'noacl' option work even without it so that one can always ask it to
be off and not error out on mount when it is not supported.

Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Signed-off-by: Sage Weil <sage@inktank.com>

Signed-off-by: Guangliang Zhao <lucienchao@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Sage Weil <sage@inktank.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

If acl is equivalent to file mode permission bits, ceph_set_acl()
needs to remove any existing acl xattr. Use __ceph_setxattr() to
handle both setting and removing acl xattr cases, it doesn't return
-ENODATA when there is no acl xattr.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

For the setxattr request, introduce a new flag CEPH_XATTR_REMOVE
to distinguish null value case from the zero-length value case.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

return -EEXIST if XATTR_CREATE is set and xattr alread exists.
return -ENODATA if XATTR_REPLACE is set but xattr does not exist.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are some more powerpc fixes for 3.14

  The main one is a nasty issue with the NUMA balancing support which
  requires a small generic change and the addition of a new accessor to
  set _PAGE_NUMA.  Both have been reviewed and acked by Mel and Rik.

  The changelog should have plenty of details but basically, without
  this fix, we get random user segfaults and/or corruptions due to
  missing TLB/hash flushes.  Aneesh series of 3 patches fixes it.

  We have some vDSO vs.  perf fixes from Anton, some small EEH fixes
  from Gavin, a ppc32 regression vs the stack overflow detector, and a
  fix for the way we handle PCIe host bridge speed settings on pseries
  (which is needed for proper operations of AMD graphics cards on
  Power8)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Disable EEH on reboot
  powerpc/eeh: Cleanup on eeh_subsystem_enabled
  powerpc/powernv: Rework EEH reset
  powerpc: Use unstripped VDSO image for more accurate profiling data
  powerpc: Link VDSOs at 0x0
  mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit
  mm: Dirty accountable change only apply to non prot numa case
  powerpc/mm: Add new "set" flag argument to pte/pmd update function
  powerpc/pseries: Add Gen3 definitions for PCIE link speed
  powerpc/pseries: Fix regression on PCI link speed
  powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack

This is not a buffer overflow in the traditional sense: we don't
overflow any *kernel* buffers, but we do mis-count the amount of data we
copy back to user space for the SYSLOG_ACTION_READ_ALL case.

In particular, if the user buffer is too small to hold everything, and
*if* there is a continuation line at just the right place, we can end up
giving the user more data than he asked for.

The reason is that we first count up the number of bytes all the log
records contains, then we walk the records again until we've skipped the
records at the beginning that won't fit, and then we walk the rest of
the records and copy them to the user space buffer.

And in between that "skip the initial records that won't fit" and the
"copy the records that *will* fit to user space", we reset the 'prev'
variable that contained the record information for the last record not
copied.  That meant that when we started copying to user space, we now
had a different character count than what we had originally calculated
in the first record walk-through.

The fix is to simply not clear the 'prev' flags value (in both cases
where we had the same logic: syslog_print_all and kmsg_dump_get_buffer:
the latter is used for pstore-like dumping)

Reported-and-tested-by: Debabrata Banerjee <dbanerje@akamai.com>
Acked-by: Kay Sievers <kay@vrfy.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Need add generic "vga.h", or can not pass building for allmodconfig,
the related error:

    CC [M]  drivers/gpu/drm/drm_irq.o
  In file included from include/linux/vgaarb.h:34,
                   from drivers/gpu/drm/drm_irq.c:42:
  include/video/vga.h:22:21: error: asm/vga.h: No such file or directory

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>

Need generic ioremap_wc(), or can not pass compiling with allmodconfig,
the related error:

    CC [M]  drivers/gpu/drm/drm_bufs.o
  drivers/gpu/drm/drm_bufs.c: In function 'drm_addmap_core':
  drivers/gpu/drm/drm_bufs.c:217: error: implicit declaration of function 'ioremap_wc'
  drivers/gpu/drm/drm_bufs.c:218: warning: assignment makes pointer from integer without a cast

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>

For avr32 cross compiler, do not define '__linux__' internally, so it
will cause issue with allmodconfig.

The related error:

    CC [M]  fs/coda/psdev.o
  In file included from include/linux/coda.h:64,
                   from fs/coda/psdev.c:45:
  include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t'

The related toolchain version (which only download, not re-compile):

  [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v
  Using built-in specs.
  Target: avr32
  Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www
.atmel.com/avr
  Thread model: single
  gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435)

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
Cc: stable@vger.kernel.org

Causing this:

In file included from arch/avr32/boards/mimc200/fram.c:13:
include/linux/miscdevice.h:51: error: field 'list' has incomplete type
include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t'
arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: stable@vger.kernel.org

If the i_crtime field is not present in the inode, don't leave the
field uninitialized.

Fixes: ef7f3835

 ("ext4: Add nanosecond timestamps")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

We possiblly detect EEH errors during reboot, particularly in kexec
path, but it's impossible for device drivers and EEH core to handle
or recover them properly.

The patch registers one reboot notifier for EEH and disable EEH
subsystem during reboot. That means the EEH errors is going to be
cleared by hardware reset or second kernel during early stage of
PCI probe.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The patch cleans up variable eeh_subsystem_enabled so that we needn't
refer the variable directly from external. Instead, we will use
function eeh_enabled() and eeh_set_enable() to operate the variable.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

When doing reset in order to recover the affected PE, we issue
hot reset on PE primary bus if it's not root bus. Otherwise, we
issue hot or fundamental reset on root port or PHB accordingly.
For the later case, we didn't cover the situation where PE only
includes root port and it potentially causes kernel crash upon
EEH error to the PE.

The patch reworks the logic of EEH reset to improve the code
readability and also avoid the kernel crash.

Cc: stable@vger.kernel.org
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We are seeing a lot of hits in the VDSO that are not resolved by perf.
A while(1) gettimeofday() loop shows the issue:

27.64%  [vdso]  [.] 0x000000000000060c
22.57%  [vdso]  [.] 0x0000000000000628
16.88%  [vdso]  [.] 0x0000000000000610
12.39%  [vdso]  [.] __kernel_gettimeofday
 6.09%  [vdso]  [.] 0x00000000000005f8
 3.58%  test    [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18
 2.94%  [vdso]  [.] __kernel_datapage_offset
 2.90%  test    [.] main

We are using a stripped VDSO image which means only symbols with
relocation info can be resolved. There isn't a lot of point to
stripping the VDSO, the debug info is only about 1kB:

4680 arch/powerpc/kernel/vdso64/vdso64.so
5815 arch/powerpc/kernel/vdso64/vdso64.so.dbg

By using the unstripped image, we can resolve all the symbols in the
VDSO and the perf profile data looks much better:

76.53%  [vdso]  [.] __do_get_tspec
12.20%  [vdso]  [.] __kernel_gettimeofday
 5.05%  [vdso]  [.] __get_datapage
 3.20%  test    [.] main
 2.92%  test    [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

perf is failing to resolve symbols in the VDSO. A while (1)
gettimeofday() loop shows:

93.99%  [vdso]  [.] 0x00000000000005e0
 3.12%  test    [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18
 2.81%  test    [.] main

The reason for this is that we are linking our VDSO shared libraries
at 1MB, which is a little weird. Even though this is uncommon, Alan
points out that it is valid and we should probably fix perf userspace.

Regardless, I can't see a reason why we are doing this. The code
is all position independent and we never rely on the VDSO ending
up at 1M (and we never place it there on 64bit tasks).

Changing our link address to 0x0 fixes perf VDSO symbol resolution:

73.18%  [vdso]  [.] 0x000000000000060c
12.39%  [vdso]  [.] __kernel_gettimeofday
 3.58%  test    [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18
 2.94%  [vdso]  [.] __kernel_datapage_offset
 2.90%  test    [.] main

We still have some local symbol resolution issues that will be
fixed in a subsequent patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Archs like ppc64 doesn't do tlb flush in set_pte/pmd functions when using
a hash table MMU for various reasons (the flush is handled as part of
the PTE modification when necessary).

ppc64 thus doesn't implement flush_tlb_range for hash based MMUs.

Additionally ppc64 require the tlb flushing to be batched within ptl locks.

The reason to do that is to ensure that the hash page table is in sync with
linux page table.

We track the hpte index in linux pte and if we clear them without flushing
hash and drop the ptl lock, we can have another cpu update the pte and can
end up with duplicate entry in the hash table, which is fatal.

We also want to keep set_pte_at simpler by not requiring them to do hash
flush for performance reason. We do that by assuming that set_pte_at() is
never *ever* called on a PTE that is already valid.

This was the case until the NUMA code went in which broke that assumption.

Fix that by introducing a new pair of helpers to set _PAGE_NUMA in a
way similar to ptep/pmdp_set_wrprotect(), with a generic implementation
using set_pte_at() and a powerpc specific one using the appropriate
mechanism needed to keep the hash table in sync.

Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

So move it within the if loop

Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

pte_update() is a powerpc-ism used to change the bits of a PTE
when the access permission is being restricted (a flush is
potentially needed).

It uses atomic operations on when needed and handles the hash
synchronization on hash based processors.

It is currently only used to clear PTE bits and so the current
implementation doesn't provide a way to also set PTE bits.

The new _PAGE_NUMA bit, when set, is actually restricting access
so it must use that function too, so this change adds the ability
for pte_update() to also set bits.

We will use this later to set the _PAGE_NUMA bit.

Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Rev3 of the PCI Express Base Specification defines a Supported Link
Speeds Vector where the bit definitions within this field are:

Bit 0 - 2.5 GT/s
Bit 1 - 5.0 GT/s
Bit 2 - 8.0 GT/s

This vector definition is used by the platform firmware to export the
maximum and current link speeds of the PCI bus via the
"ibm,pcie-link-speed-stats" device-tree property.

This patch updates pseries_root_bridge_prepare() to detect Gen3
speed buses (defined by 0x04).

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 5091f0c9

 (powerpc/pseries: Fix PCIE link speed endian issue)
introduced a regression on the PCI link speed detection using the
device-tree property. The ibm,pcie-link-speed-stats property is composed
of two 32-bit integers, the first one being the maxinum link speed and
the second the current link speed. The changes introduced by the
aforementioned commit are considering just the first integer.

Fix this issue by changing how the property is accessed, using the
helper functions to properly access the array of values. The explicit
byte swapping is not needed anymore here, since it's done by the helper
functions.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Guenter Roeck has got the following call trace on a p2020 board:
  Kernel stack overflow in process eb3e5a00, r1=eb79df90
  CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4
  task: eb3e5a00 ti: c0616000 task.ti: ef440000
  NIP: c003a420 LR: c003a410 CTR: c0017518
  REGS: eb79dee0 TRAP: 0901   Not tainted (3.13.0-rc8-juniper-00146-g19eca00)
  MSR: 00029000 <CE,EE,ME>  CR: 24008444  XER: 00000000
  GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000
  GPR08: 00000000 020b8000 00000000 00000000 44008442
  NIP [c003a420] __do_softirq+0x94/0x1ec
  LR [c003a410] __do_softirq+0x84/0x1ec
  Call Trace:
  [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable)
  [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8
  [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c
  [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8
  [ef441f40] [c000e7f4] ret_from_except+0x0/0x18
  --- Exception: 501 at 0xfcda524
      LR = 0x10024900
  Instruction dump:
  7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9
  5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f
  Kernel panic - not syncing: kernel stack overflow
  CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4
  Call Trace:

The reason is that we have used the wrong register to calculate the
ksp_limit in commit cbc9565e

 (powerpc: Remove ksp_limit on ppc64).
Just fix it.

As suggested by Benjamin Herrenschmidt, also add the C prototype of the
function in the comment in order to avoid such kind of errors in the
future.

Cc: stable@vger.kernel.org # 3.12
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull btrfs fixes from Chris Mason:
 "We have a small collection of fixes in my for-linus branch.

  The big thing that stands out is a revert of a new ioctl.  Users
  haven't shipped yet in btrfs-progs, and Dave Sterba found a better way
  to export the information"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: use right clone root offset for compressed extents
  btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105
  Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol
  Btrfs: fix max_inline mount option
  Btrfs: fix a lockdep warning when cleaning up aborted transaction
  Revert "btrfs: add ioctl to export size of global metadata reservation"

Pull devicetree fixes from Rob Herring:
 "Fix booting on PPC boards.  Changes to of_match_node matching caused
  the serial port on some PPC boards to stop working.  Reverted the
  change and reimplement to split matching between new style compatible
  only matching and fallback to old matching algorithm"

* tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: search the best compatible match first in __of_match_node()
  Revert "OF: base: match each node compatible against all given matches first"

The set_flexbg_block_bitmap() function assumed that the number of
blocks in a blockgroup was sb->blocksize * 8, which is normally true,
but not always!  Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block
bitmap corruption after:

mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jon Bernard <jbernard@tuxion.com>
Cc: stable@vger.kernel.org

If a file system has a large number of inodes per block group, all of
the metadata blocks in a flex_bg may be larger than what can fit in a
single block group.  Unfortunately, ext4_alloc_group_tables() in
resize.c was never tested to see if it would handle this case
correctly, and there were a large number of bugs which caused the
following sequence to result in a BUG_ON:

kernel bug at fs/ext4/resize.c:409!
   ...
call trace:
 [<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830
 [<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80
 [<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00
 [<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0
 [<ffffffff811b9df2>] ? final_putname+0x22/0x50
 [<ffffffff811c1371>] sys_ioctl+0x81/0xa0
 [<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b
code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0
rip  [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180


This can be reproduced with the following command sequence:

   mke2fs -t ext4 -i 4096 /dev/vdd 1G
   mount -t ext4 /dev/vdd /vdd
   resize2fs /dev/vdd 8G

To fix this, we need to make sure the right thing happens when a block
group's inode table straddles two block groups, which means the
following bugs had to be fixed:

1) Not clearing the BLOCK_UNINIT flag in the second block group in
   ext4_alloc_group_tables --- the was proximate cause of the BUG_ON.

2) Incorrectly determining how many block groups contained contiguous
   free blocks in ext4_alloc_group_tables().

3) Incorrectly setting the start of the next block range to be marked
   in use after a discontinuity in setup_new_flex_group_blocks().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org