- Nov 04, 2014
-
-
David S. Miller authored
Herbert Xu says: ==================== tun: Fix csum_start and TUN_PKT_STRIP The first patch fixes a serious problem that breaks checksum offload in VMs while the second patch fixes a problem that probably affects no one. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The makefile for sanitizing kernel headers uses the kbuild file to determine which files to do. Several networking related headers were missing. Without these headers iproute2 build would break. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
Fix: net/bridge/netfilter/nft_reject_bridge.c: In function 'nft_reject_br_send_v6_unreach': net/bridge/netfilter/nft_reject_bridge.c:240:3: error: implicit declaration of function 'csum_ipv6_magic' csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr, ^ make[3]: *** [net/bridge/netfilter/nft_reject_bridge.o] Error 1 Seen with powerpc:allmodconfig. Fixes: 523b929d ("netfilter: nft_reject_bridge: don't use IP stack to reject traffic") Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 02, 2014
-
-
Linus Walleij authored
The SMC91x is written to explicitly look up the IRQ resource from the platform device and extract the IRQ and flags, however the platform_get_irq() does additional things, like call of_irq_get() in the device tree case, which will translate the IRQ using the irqdomain and defer the probe if the IRQ host cannot be found. As we're not looking up the resource, this will not retrieve the IRQ flags, but that is better done using irqd_get_trigger_type(), as the trigger is what the driver wants to modify. We take care to preserve the semantics that will make the trigger type provided from the resource override any local specifier. Tested on the Nomadik NHK15 which has its SMC91x IRQ line connected to a STMPE2401 GPIO expander on I2C. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chen Gang authored
drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx, xps-ethernetlite-2.00.b' for QEMU using When use current latest upstream qemu (current version: 2.1.2), need let driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find net device in microblaze qemu. Related QEMU commands under fedora 20: yum install libvirt yum install tunctl tunctl -b ip link set tap0 up brctl addif virbr0 tap0 ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \ -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \ -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \ -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \ -net tap,vlan=0,ifname=tap0,script=no,downscript=no in microblaze qemu bash (guest machine): ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0 ifconfig eth0 up After add this patch, can find the device, and can be used by 'telnetd' (need cross-build busybox with glibc for it), then outside can telnet to it without password. Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport: TX dma fixes This patch series contains two fixes for our transmit path, first one is a pretty nasty one since we were not allocating a large enough dma coherent pool for our transmit descriptors, which would work most of the time, since allocations are contiguous and we could have. Second patch fixes a less frequent, though highly likley crash when using CMA allocations. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Callers of bcm_sysport_init_tx_ring() can currently fail, and will always call bcm_sysport_fini_tx_ring() in a loop ending at the number of TX queues (32) without checking if the TX ring was successfully initialized or not. Update bcm_sysport_fini_tx_ring() to return early and avoid a crash de-referencing ring->cbs if the TX ring was not initialized, since ring->cbs is the last part of the initialization done by bcm_sysport_init_tx_ring() that could fail. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Reported-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We should not be allocating a single byte of DMA coherent memory, but instead a full-sized struct dma_desc (8 bytes). Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudip Mukherjee authored
we are allocating memory using kzalloc for struct mvpp2_prs_entry, but later when we are getting error we were just returning the error value without releasing the memory. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 01, 2014
-
-
David S. Miller authored
Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These are fixes received after my previous pull request plus one that has been in the works for quite a while, but its previous version caused problems to happen, so it's been deferred till now. Fixed are two recent regressions (MFD enumeration and cpufreq-dt), ACPI EC regression introduced in 3.17, system suspend error code path regression introduced in 3.15, an older bug related to recovery from failing resume from hibernation and a cpufreq-dt driver issue related to operation performance points. Specifics: - Fix a crash on r8a7791/koelsch during resume from system suspend caused by a recent cpufreq-dt commit (Geert Uytterhoeven). - Fix an MFD enumeration problem introduced by a recent commit adding ACPI support to the MFD subsystem that exposed a weakness in the ACPI core causing ACPI enumeration to be applied to all devices associated with one ACPI companion object, although it should be used for one of them only (Mika Westerberg). - Fix an ACPI EC regression introduced during the 3.17 cycle causing some Samsung laptops to misbehave as a result of a workaround targeted at some Acer machines. That includes a revert of a commit that went too far and a quirk for the Acer machines in question. From Lv Zheng. - Fix a regression in the system suspend error code path introduced during the 3.15 cycle that causes it to fail to take errors from asychronous execution of "late" suspend callbacks into account (Imre Deak). - Fix a long-standing bug in the hibernation resume error code path that fails to roll back everything correcty on "freeze" callback errors and leaves some devices in a "suspended" state causing more breakage to happen subsequently (Imre Deak). - Make the cpufreq-dt driver disable operation performance points that are not supported by the VR connected to the CPU voltage plane with acceptable tolerance instead of constantly failing voltage scaling later on (Lucas Stach)" * tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC" cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling ACPI: Use ACPI companion to match only the first physical device cpufreq: cpufreq-dt: disable unsupported OPPs
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "These changes, intended for v3.18, fix: Sysfs - Fix "enable" filename change (Greg Kroah-Hartman) An unintentional sysfs filename change in commit 5136b2da ("PCI: convert bus code to use dev_groups"), which appeared in v3.13, changed "enable" to "enabled", and this changes it back. Old users of "enable" are currently broken and will be helped by this change. Anything that started to use "enabled" after v3.13 will be broken by this change. If necessary, we can add a symlink to make both work, but this patch doesn't do that. PCI device hotplug - Revert duplicate merge (Kamal Mostafa) A mistaken duplicate merge that added a check twice. Nothing's broken; this just removes the unnecessary code. Freescale i.MX6 - Wait for clocks to stabilize after ref_en (Richard Zhu) An i.MX6 clock problem that prevents mx6 nitrogen boards from booting" * tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Rename sysfs 'enabled' file back to 'enable' PCI: imx6: Wait for clocks to stabilize after ref_en Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"
-
Andy Lutomirski authored
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code reads out of bounds, causing the NT fix to be unreliable. But, and this is much, much worse, if your stack is somehow just below the top of the direct map (or a hole), you read out of bounds and crash. Excerpt from the crash: [ 1.129513] RSP: 0018:ffff88001da4bf88 EFLAGS: 00010296 2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp) That read is deterministically above the top of the stack. I thought I even single-stepped through this code when I wrote it to check the offset, but I clearly screwed it up. Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace") Reported-by:
Rusty Russell <rusty@ozlabs.org> Cc: stable@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfixes from Ted Ts'o: "A set of miscellaneous ext4 bug fixes for 3.18" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: make ext4_ext_convert_to_initialized() return proper number of blocks ext4: bail early when clearing inode journal flag fails ext4: bail out from make_indexed_dir() on first error jbd2: use a better hash function for the revoke table ext4: prevent bugon on race between write/fcntl ext4: remove extent status procfs files if journal load fails ext4: disallow changing journal_csum option during remount ext4: enable journal checksum when metadata checksum feature enabled ext4: fix oops when loading block bitmap failed ext4: fix overflow when updating superblock backups after resize
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota and ext3 fixes from Jan Kara. * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fs, jbd: use a more generic hash function quota: Properly return errors from dquot_writeback_dquots() ext3: Don't check quota format when there are no quota files
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "A bit has accumulated, but it's been a week or so since my last batch of post-merge-window fixes, so... 1) Missing module license in netfilter reject module, from Pablo. Lots of people ran into this. 2) Off by one in mac80211 baserate calculation, from Karl Beldan. 3) Fix incorrect return value from ax88179_178a driver's set_mac_addr op, which broke use of it with bonding. From Ian Morgan. 4) Checking of skb_gso_segment()'s return value was not all encompassing, it can return an SKB pointer, a pointer error, or NULL. Fix from Florian Westphal. This is crummy, and longer term will be fixed to just return error pointers or a real SKB. 6) Encapsulation offloads not being handled by skb_gso_transport_seglen(). From Florian Westphal. 7) Fix deadlock in TIPC stack, from Ying Xue. 8) Fix performance regression from using rhashtable for netlink sockets. The problem was the synchronize_net() invoked for every socket destroy. From Thomas Graf. 9) Fix bug in eBPF verifier, and remove the strong dependency of BPF on NET. From Alexei Starovoitov. 10) In qdisc_create(), use the correct interface to allocate ->cpu_bstats, otherwise the u64_stats_sync member isn't initialized properly. From Sabrina Dubroca. 11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter. 12) nf_tables_newchain() was erroneously expecting error pointers from netdev_alloc_pcpu_stats(). It only returna a valid pointer or NULL. From Sabrina Dubroca. 13) Fix use-after-free in _decode_session6(), from Li RongQing. 14) When we set the TX flow hash on a socket, we mistakenly do so before we've nailed down the final source port. Move the setting deeper to fix this. From Sathya Perla. 15) NAPI budget accounting in amd-xgbe driver was counting descriptors instead of full packets, fix from Thomas Lendacky. 16) Fix total_data_buflen calculation in hyperv driver, from Haiyang Zhang. 17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke Mehrtens. 18) Fix mis-use of per-cpu memory in TCP md5 code. The problem is that something that ends up being vmalloc memory can't be passed to the crypto hash routines via scatter-gather lists. From Eric Dumazet. 19) Fix regression in promiscuous mode enabling in cdc-ether, from Olivier Blin. 20) Bucket eviction and frag entry killing can race with eachother, causing an unlink of the object from the wrong list. Fix from Nikolay Aleksandrov. 21) Missing initialization of spinlock in cxgb4 driver, from Anish Bhatt. 22) Do not cache ipv4 routing failures, otherwise if the sysctl for forwarding is subsequently enabled this won't be seen. From Nicolas Cavallari" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits) drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode drivers: net: cpsw: Fix broken loop condition in switch mode net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0 stmmac: pci: set default of the filter bins net: smc91x: Fix gpios for device tree based booting mpls: Allow mpls_gso to be built as module mpls: Fix mpls_gso handler. r8152: stop submitting intr for -EPROTO netfilter: nft_reject_bridge: restrict reject to prerouting and input netfilter: nft_reject_bridge: don't use IP stack to reject traffic netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing drivers/net: macvtap and tun depend on INET drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets drivers/net: Disable UFO through virtio net: skb_fclone_busy() needs to detect orphaned skb gre: Use inner mac length when computing tunnel length mlx4: Avoid leaking steering rules on flow creation error flow net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc update from David Miller: "Two changes: 1) It makes no sense to execute a VTOC partition table request in the Sun virtual block device driver and fail to load if it doesn't succeed because a) we don't use the result at all and b) it won't succeed if there is an EFI partition on the disk, for example. We read the partition table via the normal means in the block layer anyways, so this is really completely useless, so just remove it. From Dwight Engen. 2) Hook up new bpf system call" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: don't call VD_OP_GET_VTOC sparc: Hook up bpf system call.
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze updates from Michal Simek: - wire-up new bpf syscall - fix PCI bug - fix Kconfig warning * tag 'microblaze-3.18-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Wire up bpf syscall microblaze: Fix IO space breakage after of_pci_range_to_resource() change microblaze: Fix missing NR_CPUS in menuconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fixes from all around the place: - hyper-V 32-bit PAE guest kernel fix - two IRQ allocation fixes on certain x86 boards - intel-mid boot crash fix - intel-quark quirk - /proc/interrupts duplicate irq chip name fix - cma boot crash fix - syscall audit fix - boot crash fix with certain TSC configurations (seen on Qemu) - smpboot.c build warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi() x86, intel-mid: Create IRQs for APB timers and RTC timers x86: Don't enable F00F workaround on Intel Quark processors x86/irq: Fix XT-PIC-XT-PIC in /proc/interrupts x86, cma: Reserve DMA contiguous area after initmem_init() i386/audit: stop scribbling on the stack frame x86, apic: Handle a bad TSC more gracefully x86: ACPI: Do not translate GSI number if IOAPIC is disabled x86/smpboot: Move data structure to its primary usage scope
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) cpufreq: cpufreq-dt: disable unsupported OPPs * pm-sleep: PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling
-
Rafael J. Wysocki authored
* acpi-scan: ACPI: Use ACPI companion to match only the first physical device * acpi-ec: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Various scheduler fixes all over the place: three SCHED_DL fixes, three sched/numa fixes, two generic race fixes and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/dl: Fix preemption checks sched: Update comments for CLONE_NEWNS sched: stop the unbound recursion in preempt_schedule_context() sched/fair: Fix division by zero sysctl_numa_balancing_scan_size sched/fair: Care divide error in update_task_scan_period() sched/numa: Fix unsafe get_task_struct() in task_numa_assign() sched/deadline: Fix races between rt_mutex_setprio() and dl_task_timer() sched/deadline: Don't replenish from a !SCHED_DEADLINE entity sched: Fix race between task_group and sched_task_group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus on the kernel side: - a revert for a newly introduced PMU driver which isn't complete yet and where we ran out of time with fixes (to be tried again in v3.19) - this makes up for a large chunk of the diffstat. - compilation warning fixes - a printk message fix - event_idx usage fixes/cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Trivial typo fix for --demangle perf tools: Fix report -F dso_from for data without branch info perf tools: Fix report -F dso_to for data without branch info perf tools: Fix report -F symbol_from for data without branch info perf tools: Fix report -F symbol_to for data without branch info perf tools: Fix report -F mispredict for data without branch info perf tools: Fix report -F in_tx for data without branch info perf tools: Fix report -F abort for data without branch info perf tools: Make CPUINFO_PROC an array to support different kernel versions perf callchain: Use global caching provided by libunwind perf/x86/intel: Revert incomplete and undocumented Broadwell client support perf/x86: Fix compile warnings for intel_uncore perf: Fix typos in sample code in the perf_event.h header perf: Fix and clean up initialization of pmu::event_idx perf: Fix bogus kernel printk perf diff: Add missing hists__init() call at tool start
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull futex fixes from Ingo Molnar: "This contains two futex fixes: one fixes a race condition, the other clarifies shared/private futex comments" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix a race condition between REQUEUE_PI and task death futex: Mention key referencing differences between shared and private futexes
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-10-31 Please pull this small batch of spooky fixes intended for the 3.18 stream...boo! Cyril Brulebois adds an rt2x00 device ID. Dan Carpenter provides a one-line masking fix for an ath9k debugfs entry. Larry Finger gives us a package of small rtlwifi fixes which add some bits that were left out of some feature updates that were included in the merge window. Hopefully this isn't a sign that the rtlwifi base is getting too big... Marc Yang brings a fix for a temporary mwifiex stall when doing 11n RX reordering. Please let me know if there are problems! ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lennart Sorensen authored
The cpsw driver did not support the IFF_ALLMULTI flag which makes dynamic multicast routing not work. Related to this, when enabling IFF_PROMISC in switch mode, all registered multicast addresses are flushed, resulting in only broadcast and unicast traffic being received. A new cpsw_ale_set_allmulti function now scans through the ALE entry table and adds/removes the host port from the unregistered multicast port mask of each vlan entry depending on the state of IFF_ALLMULTI. In promiscious mode, cpsw_ale_set_allmulti is used to force reception of all multicast traffic in addition to the unicast and broadcast traffic. With this change dynamic multicast and promiscious mode both work in switch mode. Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lennart Sorensen authored
0d961b3b (drivers: net: cpsw: fix buggy loop condition) accidentally fixed a loop comparison in too many places while fixing a real bug. It was correct to fix the dual_emac mode section since there 'i' is used as an index into priv->slaves which is a 0 based array. However the other two changes (which are only used in switch mode) are wrong since there 'i' is actually the ALE port number, and port 0 is the host port, while port 1 and up are the slave ports. Putting the loop condition back in the switch mode section fixes it. A comment has been added to point out the intent clearly to avoid future confusion. Also a comment is fixed that said the opposite of what was actually happening. Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by:
Heiko Schocher <hs@denx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
If a driver supports reading EEPROM but no EEPROM is installed in the system, the driver's get_eeprom_len function returns 0. ethtool will subsequently try to read that zero-length EEPROM anyway. If the driver does not support EEPROM access at all, this operation will return -EOPNOTSUPP. If the driver does support EEPROM access but no EEPROM is installed, the operation will return -EINVAL. Return -EOPNOTSUPP in both cases for consistency. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andy Shevchenko authored
The commit 3b57de95 brought the support for a different amount of the filter bins, but didn't update the PCI driver accordingly. This patch appends the default values when the device is enumerated via PCI bus. Fixes: 3b57de95 (net: stmmac: Support devicetree configs for mcast and ucast filter entries) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tony Lindgren authored
With legacy booting, the platform init code was taking care of the configuring of GPIOs. With device tree based booting, things may or may not work depending what bootloader has configured or if the legacy platform code gets called. Let's add support for the pwrdn and reset GPIOs to the smc91x driver to fix the issues of smc91x not working properly when booted in device tree mode. And let's change n900 to use these settings as some versions of the bootloader do not configure things properly causing errors. Reported-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dwight Engen authored
The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Kconfig already allows mpls to be built as module. Following patch fixes Makefile to do same. CC: Simon Horman <simon.horman@netronome.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
mpls gso handler needs to pull skb after segmenting skb. CC: Simon Horman <simon.horman@netronome.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "The tree contains two RCU fixes and a compiler quirk comment fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make rcu_barrier() understand about missing rcuo kthreads compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles rcu: More on deadlock between CPU hotplug and expedited grace periods
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "As you requested in the rc2 release mail the timer department serves you a few real bug fixes: - Fix the probe logic of the architected arm/arm64 timer - Plug a stack info leak in posix-timers - Prevent a shift out of bounds issue in the clockevents core" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ARM/ARM64: arch-timer: fix arch_timer_probed logic clockevents: Prevent shift out of bounds posix-timers: Fix stack info leak in timer_create()
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "ARM has system calls outside the NR_syscalls range, and the generic tracing system does not support that and without checks, it can cause an oops to be reported. Rabin Vincent added checks in the return code on syscall events to make sure that the system call number is within the range that tracing knows about, and if not, simply ignores the system call. The system call tracing infrastructure needs to be rewritten to handle these cases better, but for now, to keep from oopsing, this patch will do" * tag 'trace-fixes-v3.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/syscalls: Ignore numbers outside NR_syscalls' range
-
git://git.lwn.net/linux-2.6Linus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "So this is my first pull request since I rashly agreed to look after the documentation subtree. It contains some typo fixes, a few minor documentation improvements, and, most importantly, fixes for a couple of build problems in various bits of sample code. I fully intend to start sending pull requests with signed tags. However, due to poor planning on my part and the general obnoxiousness of life, I'm 2000 miles away from my private key which is sitting on a powered-down machine. This should be fixed before my next request. Meanwhile git.lwn.net is a machine under my control, the patches are all trivial, and all have done time in linux-next" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: Documentation/SubmittingPatches: Reported-by tags and permission Documentation: remove outdated references to the linux-next wiki Documentation: Restrict TSC test code to x86 doc: kernel-parameters.txt: Add ide-generic.probe-mask vdso: don't require 64-bit math in standalone test Documentation: Add CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF case Documentation: Add default kmemleak off case in kernel-parameters.txt Docs: Document that the sticky bit is understood by hugetlbfs DocBook: Reduce noise from make cleandocs Documentation: fix vdso_standalone_test_x86 on 32-bit Documentation: dt-bindings: Explain order in patch series Documentation/ABI/testing/sysfs-ibft: fix a typo
-