- Sep 15, 2016
-
-
Gavin Shan authored
The PCI hotplug can be part of EEH error recovery. The @pdn and the device's PE number aren't removed and added afterwords. The PE number in @pdn should be set to an invalid one. Otherwise, the PE's device count is decreased on removing devices while failing to be increased on adding devices. It leads to unbalanced PE's device count and make normal PCI hotplug path broken. Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Sep 14, 2016
-
-
Gavin Shan authored
The PE for root bus (root PE) can be removed because of PCI hot remove in EEH recovery path for fenced PHB error. We need update @phb->root_pe_populated accordingly so that the root PE can be populated again in forthcoming PCI hot add path. Also, the PE shouldn't be destroyed as it's global and reserved resource. Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE") Reported-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Sep 12, 2016
-
-
Michael Ellerman authored
The number of CPU feature keys is meant to map 1:1 to the number of CPU feature flags defined in cputable.h, and the latter must fit in an unsigned long. In commit 4db73271 ("powerpc: Add option to use jump label for cpu_has_feature()"), I incorrectly defined NUM_CPU_FTR_KEYS to 64. There should be no real adverse consequences of this bug, other than us allocating too many keys. Fix it by using BITS_PER_LONG. Fixes: 4db73271 ("powerpc: Add option to use jump label for cpu_has_feature()") Tested-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gautham R. Shenoy authored
pnv_wakeup_tb_loss() currently expects cr4 to be "eq" if the CPU is waking up from a complete hypervisor state loss. Hence, it currently restores the SPR contents only if cr4 is "eq". However, after commit bcef83a0 ("powerpc/powernv: Add platform support for stop instruction"), on ISA v3.0 CPUs, the function pnv_restore_hyp_resource() sets cr4 to contain the result of the comparison between the state the CPU has woken up from and the first deep stop state before calling pnv_wakeup_tb_loss(). Thus if the CPU woke up from a state that is deeper than the first deep stop state, cr4 will have "gt" set and hence, pnv_wakeup_tb_loss() will fail to restore the SPRs on waking up from such a state. Fix the code in pnv_wakeup_tb_loss() to restore the SPR states when cr4 is "eq" or "gt". Fixes: bcef83a0 ("powerpc/powernv: Add platform support for stop instruction") Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Shreyas B. Prabhu <shreyasbp@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Sep 08, 2016
-
-
Paul Mackerras authored
In commit c60ac569 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac569 ("powerpc: Update kernel VSID range") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
Commit 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef4136 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: stable@vger.kernel.org # v4.6+ Reported-by:
Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Tested-by:
Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e916772 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: stable@vger.kernel.org # v4.7+ Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Sep 06, 2016
-
-
Gavin Shan authored
The compound PE is created to accommodate the devices attached to one specific PCI bus that consume multiple M64 segments. The compound PE is made up of one master PE and possibly multiple slave PEs. The slave PEs should be destroyed when releasing the master PE. A kernel crash happens when derferencing @pe->pdev on releasing the slave PE in pnv_ioda_deconfigure_pe(). # echo 0 > /sys/bus/pci/slots/C7/power iommu: Removing device 0000:01:00.1 from group 0 iommu: Removing device 0000:01:00.0 from group 0 Unable to handle kernel paging request for data at address 0x00000010 Faulting instruction address: 0xc00000000005d898 cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620] pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610 lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610 sp: c000000fe82178a0 msr: 9000000000009033 dar: 10 dsisr: 40000000 current = 0xc000000fe815ab80 paca = 0xc00000000ff00400 softe: 0 irq_happened: 0x01 pid = 2709, comm = sh Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \ (gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \ Tue Sep 6 13:37:29 AEST 2016 enter ? for help [c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610 [c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70 [c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0 [c000000fe8217a40] c000000000704898 device_release+0x58/0xf0 [c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0 [c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40 [c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150 [c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0 [c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0 [c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190 [c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60 [c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0 [c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260 [c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190 [c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240 [c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110 [c000000fe8217e30] c000000000009524 system_call+0x38/0x108 It fixes the kernel crash by bypassing releasing resources (DMA, IO and memory segments, PELTM) because there are no resources assigned to the slave PE. Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE") Reported-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Benjamin Herrenschmidt authored
When using the OPAL ICP backend we incorrectly pass Linux CPU numbers rather than HW CPU numbers to OPAL. Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Thiago Jung Bauermann authored
On ppc64le, builds with CONFIG_KEXEC=n fail with: arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’: arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’ if (rc && !kdump_in_progress()) This is because pseries/setup.c includes <linux/kexec.h>, but kdump_in_progress() is defined in <asm/kexec.h>. This is a problem because the former only includes the latter if CONFIG_KEXEC_CORE=y. Fix it by including <asm/kexec.h> directly, as is done in powernv/setup.c. Fixes: d3cbff1b ("powerpc: Put exception configuration in a common place") Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Aug 29, 2016
-
-
Cyril Bur authored
Userspace can begin and suspend a transaction within the signal handler which means they might enter sys_rt_sigreturn() with the processor in suspended state. sys_rt_sigreturn() wants to restore process context (which may have been in a transaction before signal delivery). To do this it must restore TM SPRS. To achieve this, any transaction initiated within the signal frame must be discarded in order to be able to restore TM SPRs as TM SPRs can only be manipulated non-transactionally.. >From the PowerPC ISA: TM Bad Thing Exception [Category: Transactional Memory] An attempt is made to execute a mtspr targeting a TM register in other than Non-transactional state. Not doing so results in a TM Bad Thing: [12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable] [12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033) [12045.221540] Oops: Unrecoverable exception, sig: 6 [#1] [12045.221586] SMP NR_CPUS=2048 NUMA PowerNV [12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure scsi_transport_sas bnx2x ipr mdio libcrc32c [12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34 [12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000 [12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000 [12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700 Not tainted (4.7.0) [12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280 XER: 20000000 [12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033 GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0 GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000 GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000 GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0 [12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c [12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0 [12045.223630] Call Trace: [12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0 [12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108 [12045.223806] Instruction dump: [12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 [12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 [12045.224074] ---[ end trace cb8002ee240bae76 ]--- It isn't clear exactly if there is really a use case for userspace returning with a suspended transaction, however, doing so doesn't (on its own) constitute a bad frame. As such, this patch simply discards the transactional state of the context calling the sigreturn and continues. Reported-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Tested-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
Simon Guo <wei.guo.simon@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mukesh Ojha authored
In a situation, where Linux kernel gets notified about duplicate error log from OPAL, it is been observed that kernel fails to remove sysfs entries (/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because, we currently search the error log/dump kobject in the kset list via 'kset_find_obj()' routine. Which eventually increment the reference count by one, once it founds the kobject. So, unless we decrement the reference count by one after it found the kobject, we would not be able to release the kobject properly later. This patch adds the 'kobject_put()' which was missing earlier. Signed-off-by:
Mukesh Ojha <mukesh02@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Reviewed-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Nicholas Piggin authored
tabort_syscall runs with RI=1, so a nested recoverable machine check will load the paca into r13 and overwrite what we loaded it with, because exceptions returning to privileged mode do not restore r13. Fixes: b4b56f9e (powerpc/tm: Abort syscalls in active transactions) Cc: stable@vger.kernel.org Signed-off-by:
Nick Piggin <npiggin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- Aug 22, 2016
-
-
Paolo Bonzini authored
hmi.c functions are unused unless sibling_subcore_state is nonzero, and that in turn happens only if KVM is in use. So move the code to arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE rather than CONFIG_PPC_BOOK3S_64. The sibling_subcore_state is also included in struct paca_struct only if KVM is supported by the kernel. Cc: Daniel Axtens <dja@axtens.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: kvm-ppc@vger.kernel.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Christophe Leroy authored
of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() [ 0.275940] Unable to handle kernel paging request for data at address 0x00000130 [ 0.283120] Faulting instruction address: 0xc01b44cc [ 0.288175] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.293343] PREEMPT CMPC885 [ 0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68 [ 0.304131] task: c6074000 ti: c6080000 task.ti: c6080000 [ 0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708 [ 0.314372] REGS: c6081d90 TRAP: 0300 Not tainted (4.7.0-g65124df-dirty) [ 0.322267] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 24000028 XER: 20000000 [ 0.328813] DAR: 00000130 DSISR: c0000000 GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000 GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083 GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000 [ 0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc [ 0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44 [ 0.370972] Call Trace: [ 0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc [ 0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118 [ 0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c [ 0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc [ 0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110 [ 0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64 [ 0.408233] Instruction dump: [ 0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004 [ 0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0 [ 0.426763] ---[ end trace fe4113ee21d72ffa ]--- fixes: e65078f1 ("powerpc: sysdev: cpm1: use gpiochip data pointer") fixes: a14a2d48 ("powerpc: cpm_common: use gpiochip data pointer") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Nicholas Piggin authored
MCE must not enable MSR_RI until PACA_EXMC is no longer being used. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Nicholas Piggin authored
MCE must not use PACA_EXGEN. When a general exception enables MSR_RI, that means SPRN_SRR[01] and SPRN_SPRG are no longer used. However the PACA save area is still in use. Acked-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
When booting from an OpenFirmware which supports it, we use the "ibm,client-architecture-support" firmware call to communicate our capabilities to firmware. The format of the structure we pass to firmware is specified in PAPR (Power Architecture Platform Requirements), or the public version LoPAPR (Linux on Power Architecture Platform Reference). Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte field at bytes 17-20 for the "Platform Facilities Enable". This is followed by a 1 byte field at byte 21 for "Sub-Processor Represenation Level". Comparing to the code, there we have the Platform Facilities options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is incorrectly placed at byte 18. Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes to hopefully make it clearer in future. As far as I'm aware nothing actually consumes this value at this time, so the effect of this bug is nil in practice. It does mean we've been incorrectly setting bit 15 of the "Platform Facilities Enable" option for the past ~3 1/2 years, so we should avoid allocating that bit to anything else in future. Fixes: df77c799 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Boqun Feng authored
We observed a kernel oops when running a PPC guest with config NR_CPUS=4 and qemu option "-smp cores=1,threads=8": [ 30.634781] Unable to handle kernel paging request for data at address 0xc00000014192eb17 [ 30.636173] Faulting instruction address: 0xc00000000003e5cc [ 30.637069] Oops: Kernel access of bad area, sig: 11 [#1] [ 30.637877] SMP NR_CPUS=4 NUMA pSeries [ 30.638471] Modules linked in: [ 30.638949] CPU: 3 PID: 27 Comm: migration/3 Not tainted 4.7.0-07963-g9714b26 #1 [ 30.640059] task: c00000001e29c600 task.stack: c00000001e2a8000 [ 30.640956] NIP: c00000000003e5cc LR: c00000000003e550 CTR: 0000000000000000 [ 30.642001] REGS: c00000001e2ab8e0 TRAP: 0300 Not tainted (4.7.0-07963-g9714b26) [ 30.643139] MSR: 8000000102803033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[E]> CR: 22004084 XER: 00000000 [ 30.644583] CFAR: c000000000009e98 DAR: c00000014192eb17 DSISR: 40000000 SOFTE: 0 GPR00: c00000000140a6b8 c00000001e2abb60 c0000000016dd300 0000000000000003 GPR04: 0000000000000000 0000000000000004 c0000000016e5920 0000000000000008 GPR08: 0000000000000004 c00000014192eb17 0000000000000000 0000000000000020 GPR12: c00000000140a6c0 c00000000ffffc00 c0000000000d3ea8 c00000001e005680 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 c00000001e6b3a00 0000000000000000 0000000000000001 GPR24: c00000001ff85138 c00000001ff85130 000000001eb6f000 0000000000000001 GPR28: 0000000000000000 c0000000017014e0 0000000000000000 0000000000000018 [ 30.653882] NIP [c00000000003e5cc] __cpu_disable+0xcc/0x190 [ 30.654713] LR [c00000000003e550] __cpu_disable+0x50/0x190 [ 30.655528] Call Trace: [ 30.655893] [c00000001e2abb60] [c00000000003e550] __cpu_disable+0x50/0x190 (unreliable) [ 30.657280] [c00000001e2abbb0] [c0000000000aca0c] take_cpu_down+0x5c/0x100 [ 30.658365] [c00000001e2abc10] [c000000000163918] multi_cpu_stop+0x1a8/0x1e0 [ 30.659617] [c00000001e2abc60] [c000000000163cc0] cpu_stopper_thread+0xf0/0x1d0 [ 30.660737] [c00000001e2abd20] [c0000000000d8d70] smpboot_thread_fn+0x290/0x2a0 [ 30.661879] [c00000001e2abd80] [c0000000000d3fa8] kthread+0x108/0x130 [ 30.662876] [c00000001e2abe30] [c000000000009968] ret_from_kernel_thread+0x5c/0x74 [ 30.664017] Instruction dump: [ 30.664477] 7bde1f24 38a00000 787f1f24 3b600001 39890008 7d204b78 7d05e214 7d0b07b4 [ 30.665642] 796b1f24 7d26582a 7d204a14 7d29f214 <7d4048a8> 7d4a3878 7d4049ad 40c2fff4 [ 30.666854] ---[ end trace 32643b7195717741 ]--- The reason of this is that in __cpu_disable(), when we try to set the cpu_sibling_mask or cpu_core_mask of the sibling CPUs of the disabled one, we don't check whether the current configuration employs those sibling CPUs(hw threads). And if a CPU is not employed by a configuration, the percpu structures cpu_{sibling,core}_mask are not allocated, therefore accessing those cpumasks will result in problems as above. This patch fixes this problem by adding an addition check on whether the id is no less than nr_cpu_ids in the sibling CPU iteration code. Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Paul Gortmaker authored
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andrzej Hajda authored
Unsigned type is always non-negative, so the loop could not end in case condition is never true. The problem has been detected using semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mauricio Faria de Oliveira authored
This patch leverages 'struct pci_host_bridge' from the PCI subsystem in order to free the pci_controller only after the last reference to its devices is dropped (avoiding an oops in pcibios_release_device() if the last reference is dropped after pcibios_free_controller()). The patch relies on pci_host_bridge.release_fn() (and .release_data), which is called automatically by the PCI subsystem when the root bus is released (i.e., the last reference is dropped). Those fields are set via pci_set_host_bridge_release() (e.g. in the platform-specific implementation of pcibios_root_bridge_prepare()). It introduces the 'pcibios_free_controller_deferred()' .release_fn() and it expects .release_data to hold a pointer to the pci_controller. The function implictly calls 'pcibios_free_controller()', so an user must *NOT* explicitly call it if using the new _deferred() callback. The functionality is enabled for pseries (although it isn't platform specific, and may be used by cxl). Details on not-so-elegant design choices: - Use 'pci_host_bridge.release_data' field as pointer to associated 'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)' in pcibios_free_controller_deferred(). That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL' (so, if the last reference is released after pci_remove_root_bus() runs, which eventually reaches pcibios_free_controller_deferred(), that would hit a null pointer dereference). The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks are interested in this fix. Test-case #1 (hold references) # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0 <...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...> # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1 <...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...> # cat >/dev/sdaa & pid1=$! # cat >/dev/sdab & pid2=$! # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r Validating PHB DLPAR capability...yes. [ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01 [ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0... ... [ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1... ... [ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released [ 611.972140] rpadlpar_io: slot PHB 33 removed # kill -9 $pid1 # kill -9 $pid2 [ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1 Test-case #2 (don't hold references) # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r Validating PHB DLPAR capability...yes. [ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01 [ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0... ... [ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1... ... [ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released [ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1 [ 933.955999] rpadlpar_io: slot PHB 33 removed Suggested-By:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andrew Donnellan authored
When cxl removes a vPHB, it's possible that the pci_controller may be freed before all references to the devices on the vPHB have been released. This in turn causes an invalid memory access when the devices are eventually released, as pcibios_release_device() attempts to call the phb's release_device hook. In cxl_pci_vphb_remove(), remove the existing call to pcibios_free_controller(). Instead, use pcibios_free_controller_deferred() to free the pci_controller after all devices have been released. Export pci_set_host_bridge_release() so we can do this. Cc: stable@vger.kernel.org Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Markus Elfring authored
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Guenter Roeck authored
Powerpc builds may fail with the following build error. Error log: In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0, from ./include/linux/mmu_context.h:4, from mm/mmu_context.c:8: ./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr': ./arch/powerpc/include/asm/cputhreads.h:101:2: error: implicit declaration of function 'cpu_has_feature' The problem can be triggered by configuring ppc64e_defconfig and selecting CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE. Fixes: b92a226e ("powerpc: Move cpu_has_feature() to a separate file") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull two parisc fixes from Helge Deller: "The first patch ensures that the high-res cr16 clocksource (which was added in kernel 4.7) gets choosen as default clocksource for parisc. The second patch moves the #define of EREFUSED down inside errno.h and thus unbreaks building the gccgo compiler" * 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix order of EREFUSED define in errno.h parisc: Fix automatic selection of cr16 clocksource
-
Tony Luck authored
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by:
Aristeu Rozanski <aris@redhat.com> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 20, 2016
-
-
Helge Deller authored
When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
-
Helge Deller authored
Commit 54b66800 (parisc: Add native high-resolution sched_clock() implementation) added support to use the CPU-internal cr16 counters as reliable clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK. Sadly the commit missed to remove the hack which prevented cr16 to become the default clocksource even on SMP systems. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.7+
-
Linus Torvalds authored
The kernel test robot reported a usercopy failure in the new hardened sanity checks, due to a page-crossing copy of the FPU state into the task structure. This happened because the kernel test robot was testing with SLOB, which doesn't actually do the required book-keeping for slab allocations, and as a result the hardening code didn't realize that the task struct allocation was one single allocation - and the sanity checks fail. Since SLOB doesn't even claim to support hardening (and you really shouldn't use it), the straightforward solution is to just make the usercopy hardening code depend on the allocator supporting it. Reported-by:
kernel test robot <xiaolong.ye@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has some pretty standard driver bugfixes and one minor cleanup" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: meson: Use complete() instead of complete_all() i2c: brcmstb: Use complete() instead of complete_all() i2c: bcm-kona: Use complete() instead of complete_all() i2c: bcm-iproc: Use complete() instead of complete_all() i2c: at91: fix support of the "alternative command" feature i2c: ocores: add missed clk_disable_unprepare() on failure paths i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer() i2c: mux: demux-pinctrl: properly roll back when adding adapter fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - a stable fix for DM round robin multipath path selector to disable preemption before using this_cpu_ptr() - a slight increase in DM crypt's mempool reserves to make swap ontop of DM crypt more performant - a few DM raid fixes to issues found while testing changes that were merged in v4.8-rc1 * tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: support raid0 with missing metadata devices dm raid: enhance attempt_restore_of_faulty_devices() to support more devices dm raid: fix restoring of failed devices regression dm raid: fix frozen recovery regression dm crypt: increase mempool reserve to better support swapping dm round robin: do not use this_cpu_ptr() without having preemption disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Six fairly small fixes. The ipr, mpt3sas and ses ones all trigger oopses. The megaraid one fixes an attach failure on io mapped only cards, the fcoe one is an obvious problem in the error path and the aacraid one is a theoretical security issue (ability to trick the kernel into a buffer overrun)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: Fix racy cleanup of /sys in remove_dev() mpt3sas: Fix resume on WarpDrive flash cards ipr: Fix sync scsi scan megaraid_sas: Fix probing cards without io port aacraid: Check size values after double-fetch from user fcoe: Use kfree_skb() instead of kfree()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for your tree. The normal amount of gadget fixes, xhci fixes, new device ids, and a few other minor things. All of them have been in linux-next for a while, the full details are in the shortlog below" * tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) xhci: don't dereference a xhci member after removing xhci usb: xhci: Fix panic if disconnect xhci: really enqueue zero length TRBs. xhci: always handle "Command Ring Stopped" events cdc-acm: fix wrong pipe type on rx interrupt xfers usb: misc: usbtest: add fix for driver hang usb: dwc3: gadget: stop processing on HWO set usb: dwc3: don't set last bit for ISOC endpoints usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG usb: udc: core: fix error handling usb: gadget: fsl_qe_udc: off by one in setup_received_handle() usb/gadget: fix gadgetfs aio support. usb: gadget: composite: Fix return value in case of error usb: gadget: uvc: Fix return value in case of error usb: gadget: fix check in sync read from ep in gadgetfs usb: misc: usbtest: usbtest_do_ioctl may return positive integer usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe() usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() usb: gadget: configfs: add mutex lock before unregister gadget usb: gadget: u_ether: fix dereference after null check coverify warning ...
-
Linus Torvalds authored
Merge tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs and iomap fixes from Dave Chinner: "Changes in this update: Regression fixes for XFS changes introduce in 4.8-rc1: - buffer IO accounting assert failure - ENOSPC block accounting reservation issue - DAX IO path page cache invalidation fix - rmapbt on-disk block count in agf - correct classification of rmap block type when updating AGFL. - iomap support for attribute fork mapping Regression fixes for iomap infrastructure in 4.8-rc1: - fiemap: honor FIEMAP_FLAG_SYNC - fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression - make mark_page_accessed and pagefault_disable usage consistent with other IO paths" * tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: remove OWN_AG rmap when allocating a block from the AGFL xfs: (re-)implement FIEMAP_FLAG_XATTR xfs: simplify xfs_file_iomap_begin iomap: mark ->iomap_end as optional iomap: prepare iomap_fiemap for attribute mappings iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag iomap: remove superflous pagefault_disable from iomap_write_actor iomap: remove superflous mark_page_accessed from iomap_write_actor xfs: store rmapbt block count in the AGF xfs: don't invalidate whole file on DAX read/write xfs: fix bogus space reservation in xfs_iomap_write_allocate xfs: don't assert fail on non-async buffers on ioacct decrement
-
- Aug 19, 2016
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix a bug in it87 driver and URLs in ftsteutates driver" * tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ftsteutates) Correct ftp urls in driver documentation hwmon: (it87) Features mask must be 32 bit wide
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull more drm fixes from Dave Airlie: "Daniel pointed out I'd missed some i915 fixes, and I also found a single etnaviv fix I missed. So here they are" * tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux: drm/etnaviv: take GPU lock later in the submit process drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
-