- Apr 21, 2015
-
-
Paul Mackerras authored
Rather than calling cond_resched() in kvmppc_run_core() before doing the post-processing for the vcpus that we have just run (that is, calling kvmppc_handle_exit_hv(), kvmppc_set_timer(), etc.), we now do that post-processing before calling cond_resched(), and that post- processing is moved out into its own function, post_guest_process(). The reschedule point is now in kvmppc_run_vcpu() and we define a new vcore state, VCORE_PREEMPT, to indicate that that the vcore's runner task is runnable but not running. (Doing the reschedule with the vcore in VCORE_INACTIVE state would be bad because there are potentially other vcpus waiting for the runner in kvmppc_wait_for_exec() which then wouldn't get woken up.) Also, we make use of the handy cond_resched_lock() function, which unlocks and relocks vc->lock for us around the reschedule. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
* Remove unused kvmppc_vcore::n_busy field. * Remove setting of RMOR, since it was only used on PPC970 and the PPC970 KVM support has been removed. * Don't use r1 or r2 in setting the runlatch since they are conventionally reserved for other things; use r0 instead. * Streamline the code a little and remove the ext_interrupt_to_host label. * Add some comments about register usage. * hcall_try_real_mode doesn't need to be global, and can't be called from C code anyway. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
Previously, if kvmppc_run_core() was running a VCPU that needed a VPA update (i.e. one of its 3 virtual processor areas needed to be pinned in memory so the host real mode code can update it on guest entry and exit), we would drop the vcore lock and do the update there and then. Future changes will make it inconvenient to drop the lock, so instead we now remove it from the list of runnable VCPUs and wake up its VCPU task. This will have the effect that the VCPU task will exit kvmppc_run_vcpu(), go around the do loop in kvmppc_vcpu_run_hv(), and re-enter kvmppc_run_vcpu(), whereupon it will do the necessary call to kvmppc_update_vpas() and then rejoin the vcore. The one complication is that the runner VCPU (whose VCPU task is the current task) might be one of the ones that gets removed from the runnable list. In that case we just return from kvmppc_run_core() and let the code in kvmppc_run_vcpu() wake up another VCPU task to be the runner if necessary. This all means that the VCORE_STARTING state is no longer used, so we remove it. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
This reads the timebase at various points in the real-mode guest entry/exit code and uses that to accumulate total, minimum and maximum time spent in those parts of the code. Currently these times are accumulated per vcpu in 5 parts of the code: * rm_entry - time taken from the start of kvmppc_hv_entry() until just before entering the guest. * rm_intr - time from when we take a hypervisor interrupt in the guest until we either re-enter the guest or decide to exit to the host. This includes time spent handling hcalls in real mode. * rm_exit - time from when we decide to exit the guest until the return from kvmppc_hv_entry(). * guest - time spend in the guest * cede - time spent napping in real mode due to an H_CEDE hcall while other threads in the same vcore are active. These times are exposed in debugfs in a directory per vcpu that contains a file called "timings". This file contains one line for each of the 5 timings above, with the name followed by a colon and 4 numbers, which are the count (number of times the code has been executed), the total time, the minimum time, and the maximum time, all in nanoseconds. The overhead of the extra code amounts to about 30ns for an hcall that is handled in real mode (e.g. H_SET_DABR), which is about 25%. Since production environments may not wish to incur this overhead, the new code is conditional on a new config symbol, CONFIG_KVM_BOOK3S_HV_EXIT_TIMING. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
This creates a debugfs directory for each HV guest (assuming debugfs is enabled in the kernel config), and within that directory, a file by which the contents of the guest's HPT (hashed page table) can be read. The directory is named vmnnnn, where nnnn is the PID of the process that created the guest. The file is named "htab". This is intended to help in debugging problems in the host's management of guest memory. The contents of the file consist of a series of lines like this: 3f48 4000d032bf003505 0000000bd7ff1196 00000003b5c71196 The first field is the index of the entry in the HPT, the second and third are the HPT entry, so the third entry contains the real page number that is mapped by the entry if the entry's valid bit is set. The fourth field is the guest's view of the second doubleword of the entry, so it contains the guest physical address. (The format of the second through fourth fields are described in the Power ISA and also in arch/powerpc/include/asm/mmu-hash64.h.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Suresh Warrier authored
Add two counters to count how often we generate real-mode ICS resend and reject events. The counters provide some performance statistics that could be used in the future to consider if the real mode functions need further optimizing. The counters are displayed as part of IPC and ICP state provided by /sys/debug/kernel/powerpc/kvm* for each VM. Also added two counters that count (approximately) how many times we don't find an ICP or ICS we're looking for. These are not currently exposed through sysfs, but can be useful when debugging crashes. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Suresh Warrier authored
Interrupt-based hypercalls return H_TOO_HARD to inform KVM that it needs to switch to the host to complete the rest of hypercall function in virtual mode. This patch ports the virtual mode ICS/ICP reject and resend functions to be runnable in hypervisor real mode, thus avoiding the need to switch to the host to execute these functions in virtual mode. However, the hypercalls continue to return H_TOO_HARD for vcpu_wakeup and notify events - these events cannot be done in real mode and they will still need a switch to host virtual mode. There are sufficient differences between the real mode code and the virtual mode code for the ICS/ICP resend and reject functions that for now the code has been duplicated instead of sharing common code. In the future, we can look at creating common functions. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Suresh Warrier authored
Replaces the ICS mutex lock with a spin lock since we will be porting these routines to real mode. Note that we need to disable interrupts before we take the lock in anticipation of the fact that on the guest side, we are running in the context of a hard irq and interrupts are disabled (EE bit off) when the lock is acquired. Again, because we will be acquiring the lock in hypervisor real mode, we need to use an arch_spinlock_t instead of a normal spinlock here as we want to avoid running any lockdep code (which may not be safe to execute in real mode). Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Suresh E. Warrier authored
Add counters to track number of times we switch from guest real mode to host virtual mode during an interrupt-related hyper call because the hypercall requires actions that cannot be completed in real mode. This will help when making optimizations that reduce guest-host transitions. It is safe to use an ordinary increment rather than an atomic operation because there is one ICP per virtual CPU and kvmppc_xics_rm_complete() only works on the ICP for the current VCPU. The counters are displayed as part of IPC and ICP state provided by /sys/debug/kernel/powerpc/kvm* for each VM. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Aneesh Kumar K.V authored
This adds helper routines for locking and unlocking HPTEs, and uses them in the rest of the code. We don't change any locking rules in this patch. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Aneesh Kumar K.V authored
We don't support real-mode areas now that 970 support is removed. Remove the remaining details of rma from the code. Also rename rma_setup_done to hpte_setup_done to better reflect the changes. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Michael Ellerman authored
Some PowerNV systems include a hardware random-number generator. This HWRNG is present on POWER7+ and POWER8 chips and is capable of generating one 64-bit random number every microsecond. The random numbers are produced by sampling a set of 64 unstable high-frequency oscillators and are almost completely entropic. PAPR defines an H_RANDOM hypercall which guests can use to obtain one 64-bit random sample from the HWRNG. This adds a real-mode implementation of the H_RANDOM hypercall. This hypercall was implemented in real mode because the latency of reading the HWRNG is generally small compared to the latency of a guest exit and entry for all the threads in the same virtual core. Userspace can detect the presence of the HWRNG and the H_RANDOM implementation by querying the KVM_CAP_PPC_HWRNG capability. The H_RANDOM hypercall implementation will only be invoked when the guest does an H_RANDOM hypercall if userspace first enables the in-kernel H_RANDOM implementation using the KVM_CAP_PPC_ENABLE_HCALL capability. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
David Gibson authored
On POWER, storage caching is usually configured via the MMU - attributes such as cache-inhibited are stored in the TLB and the hashed page table. This makes correctly performing cache inhibited IO accesses awkward when the MMU is turned off (real mode). Some CPU models provide special registers to control the cache attributes of real mode load and stores but this is not at all consistent. This is a problem in particular for SLOF, the firmware used on KVM guests, which runs entirely in real mode, but which needs to do IO to load the kernel. To simplify this qemu implements two special hypercalls, H_LOGICAL_CI_LOAD and H_LOGICAL_CI_STORE which simulate a cache-inhibited load or store to a logical address (aka guest physical address). SLOF uses these for IO. However, because these are implemented within qemu, not the host kernel, these bypass any IO devices emulated within KVM itself. The simplest way to see this problem is to attempt to boot a KVM guest from a virtio-blk device with iothread / dataplane enabled. The iothread code relies on an in kernel implementation of the virtio queue notification, which is not triggered by the IO hcalls, and so the guest will stall in SLOF unable to load the guest OS. This patch addresses this by providing in-kernel implementations of the 2 hypercalls, which correctly scan the KVM IO bus. Any access to an address not handled by the KVM IO bus will cause a VM exit, hitting the qemu implementation as before. Note that a userspace change is also required, in order to enable these new hcall implementations with KVM_CAP_PPC_ENABLE_HCALL. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> [agraf: fix compilation] Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Suresh E. Warrier authored
Export __spin_yield so that the arch_spin_unlock() function can be invoked from a module. This will be required for modules where we want to take a lock that is also is acquired in hypervisor real mode. Because we want to avoid running any lockdep code (which may not be safe in real mode), this lock needs to be an arch_spinlock_t instead of a normal spinlock. Signed-off-by:
Suresh Warrier <warrier@linux.vnet.ibm.com> Acked-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
- Apr 14, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here's the driver-core / kobject / lz4 tree update for 4.1-rc1. Everything here has been in linux-next for a while with no reported issues. It's mostly just coding style cleanups, with other minor changes in here as well, nothing big" * tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) debugfs: allow bad parent pointers to be passed in stable_kernel_rules: Add clause about specification of kernel versions to patch. kobject: WARN as tip when call kobject_get() to a kobject not initialized lib/lz4: Pull out constant tables drivers: platform: parse IRQ flags from resources driver core: Make probe deferral more quiet drivers/core/of: Add symlink to device-tree from devices with an OF node device: Add dev_of_node() accessor drivers: base: fw: fix ret value when loading fw firmware: Avoid manual device_create_file() calls drivers/base: cacheinfo: validate device node for all the caches drivers/base: use tabs where possible in code indentation driver core: add missing blank line after declaration drivers: base: node: Delete space after pointer declaration drivers: base: memory: Use tabs instead of spaces firmware_class: Fix whitespace and indentation drivers: base: dma-mapping: Erase blank space after pointer drivers: base: class: Add a blank line after declarations attribute_container: fix missing blank lines after declarations drivers: base: memory: Fix switch indent ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "Nothing too interesting. Rik made cpuset cooperate better with isolcpus and there are several other cleanup patches" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset, isolcpus: document relationship between cpusets & isolcpus cpusets, isolcpus: exclude isolcpus from load balancing in cpusets sched, isolcpu: make cpu_isolated_map visible outside scheduler cpuset: initialize cpuset a bit early cgroup: Use kvfree in pidlist_free() cgroup: call cgroup_subsys->bind on cgroup subsys initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq core updates from Thomas Gleixner: "Managerial summary: Core code: - final removal of IRQF_DISABLED - new state save/restore functions for virtualization support - wakeup support for stacked irqdomains - new function to solve the netpoll synchronization problem irqchips: - new driver for STi based devices - new driver for Vybrid MSCM - massive cleanup of the GIC driver by moving the GIC-addons to stacked irqdomains - the usual pile of fixes and updates to the various chip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: GICv3: Add support for irq_[get, set]_irqchip_state() irqchip: GIC: Add support for irq_[get, set]_irqchip_state() genirq: Allow the irqchip state of an IRQ to be save/restored genirq: MSI: Fix freeing of unallocated MSI irqchip: renesas-irqc: Add wake-up support irqchip: armada-370-xp: Allow using wakeup source irqchip: mips-gic: Add new functions to start/stop the GIC counter irqchip: tegra: Add Tegra210 support irqchip: digicolor: Move digicolor_set_gc to init section irqchip: renesas-irqc: Add functional clock to bindings irqchip: renesas-irqc: Add minimal runtime PM support irqchip: renesas-irqc: Add more register documentation DT: exynos: update PMU binding ARM: exynos4/5: convert pmu wakeup to stacked domains irqchip: gic: Don't complain in gic_get_cpumask() if UP system ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags ARM: shmobile: remove use of gic_arch_extn.irq_set_wake irqchip: gic: Add an entry point to set up irqchip flags ARM: omap: convert wakeupgen to stacked domains ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI changes from Sebastian Reichel: - nokia-modem: support speech data - misc fixes * tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: fix error return code HSI: nokia-modem: Add cmt-speech support HSI: cmt_speech: Add cmt-speech driver HSI: nokia-modem: fix error return code
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "Another release, another set of regulator updates. Not much of it is showing up in the code yet but there's been a lot of discussion going on about how to enhance the regulator API to work better with modern SoCs which have a microcontroller sitting between Linux and the hardware. I'm hopeful that'll start to come through into mainline for v4.2 but it's not quite there for v4.1 - what we do have (along with the usual small updates is) is: - work from Bjorn Andersson on refactoring the configuration of regulator loading interfaces to be useful for use with microcontrollers, the existing interfaces were never actually useful for anything as-is since nobody was willing to put enough data into public code. - a summary tree display in debugfs from Heiko Stübner. - support for act6000 regulators" * tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) regulator: max8660: Handle empty regulator data regulator: output current-limit for all regulators in summary regulator: add a summary tree in debugfs regulator: qcom: Tidy up probe() regulator: qcom: Rework to single platform device regulator: qcom: Refactor of-parsing code regulator: qcom: Don't enable DRMS in driver regulator: max8660: fix assignment of pdata to data that becomes dead regulator: Defer lookup of supply to regulator_get mfd: max77693: Remove unused structures regulator: max77693: Let core parse DT and drop board files support regulator: Ensure unique regulator debugfs directory names regulator: stw481x: Remove unused fields from struct stw481x regulator: palmas: Add has_regen3 check for TPS659038 regulator: constify of_device_id array regulator: fixes for regulator_set_optimum_mode name change regulator: Drop temporary regulator_set_optimum_mode wrapper usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode usb: phy: ab8500-usb: Rename regulator_set_optimum_mode ufs: Rename of regulator_set_optimum_mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "Only one framework update this time around, a change from Lars-Peter to move full to pm_ops and remove the legacy bus PM ops. Otherwise it's all driver updates: - make the spidev driver complain loudly if registered as spidev with DT rather than with a compatible string, hopefully helping people avoid making that mistake. - error handling and robustness fixes for the Designware and Intel MID drivers from Andy Shevchenko. - substantial performance improvements for the Raspberry Pi driver from Martin Sperl. - several new features for spidev_test from Adrian Remonda and Ian Abbott" * tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits) spi: bcm2835: enabling polling mode for transfers shorter than 30us spi: bcm2835: transform native-cs to gpio-cs on first spi_setup spi: img-spfi: Control CS lines with GPIO spi: img-spfi: Reset controller after each message spi: img-spfi: Implement a handle_err() callback spi: img-spfi: Setup TRANSACTION register before CONTROL register spi: Make master->handle_err() callback optional to avoid crashes spi: img-spfi: Limit bit clock to 1/4th of input clock spi: img-spfi: Implement a prepare_message() callback spi: fsl-dspi: Add ~50ns delay between cs and sck spi: fsl-dspi: Add cs-sck delays spi: fsl-dspi: Fix clock rate scale values spi: signedness bug in qspi_trigger_transfer_out_int() spi: imx: read back the RX/TX watermark levels earlier spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() spi: bitbang: only toggle bitchanges spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() spi: fsl-dspi: Fix clock rate scale values spi: Using Trigger number to transmit/receive data spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap update from Mark Brown: "Just one patch for regmap this time around, a change from Steven Rostedt to prettify the way we're making the regmap internal header available to the trace events (it turns out that the trace subsystem doesn't actually need to be in trace/events)" * tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Move tracing header into drivers/base/regmap
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: - convert a bunch of drivers to static attribute groups (Takashi Iwai) - misc cleanups * tag 'edac_for_4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Constify of_device_id array EDAC, i82443bxgx: Don't export static symbol EDAC, amd64_edac: Get rid of per-node driver instances EDAC: Properly unwind on failure path in edac_init() EDAC: highbank: Use static attribute groups for sysfs entries EDAC: octeon: Use static attribute groups for sysfs entries EDAC: mpc85xx: Use static attribute groups for sysfs entries EDAC: i7core: Use static attribute groups for sysfs entries EDAC: i7core: Return proper error codes for kzalloc() errors EDAC: amd64: Use static attribute groups EDAC: Allow to pass driver-specific attribute groups EDAC: Use static attribute groups for managing sysfs entries EDAC: Delete unnecessary checks before pci_dev_put()
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Support for new chips: - add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87 driver - add driver for NCT7904 Functional improvements: - support for new devicetree structure in ibmpowernv driver - register pwm-fan and gpio-fan drivers as thermal cooling devices - various minor cleanup and improvements to it87, nct6775, jc42, ibmpex, and coretemp drivers" * tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (43 commits) hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan hwmon: (it87) Use feature macros on sio_data hwmon: (ibmpowernv) Fix build error seen for some configurations hwmon: (gpio-fan) Move the thermal registration after registration is complete hwmon: (ibmpowernv) pretty print labels hwmon: (ibmpowernv) add a label attribute hwmon: (ibmpowernv) add support for the new device tree hwmon: (ibmpowernv) add a helper routine create_hwmon_attr hwmon: (it87) Add support for 6th fan of IT8620E hwmon: (it87) Add support for IT8620E hwmon: (it87) Add support for IT8790E hwmon: (it87) Introduce feature flag to reflect internal in7 sensor hwmon: (it87) Introduce configuration field for chip suffix hwmon: (it87) Fix PWM frequency display for chips with newer PWM control hwmon: (it87) Fix pwm sysfs attribute removal hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype hwmon: (ibmpowernv) add a convert_opal_attr_name() routine hwmon: (ibmpowernv) add a get_sensor_type() routine hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull avr32 fix from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix integer overflow in ELF_ET_DYN_BASE
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix out-of-bounds array index in OSS IRQ source initialization m68k/pci: Remove a superflous KERN_ERR m68k/defconfig: Update defconfigs for v4.0-rc1 m68k/q40: Make NE2000 builtin instead of modular m68k: Remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vdso changes from Ingo Molnar: "Misc vDSO updates" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Remove x32 intermediates during 'make clean' x86/vdso: Teach 'make clean' to remove generated vdso-image-*.c files x86/vdso32/syscall.S: Do not load __USER32_DS to %ss x86/vdso: Fix the x86 vdso2c tool includes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Leftover from 4.0 Fix a local stack variable corruption with certain kdump usage patterns (Dave Young)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/numa: Fix kernel stack corruption in numa_init()->numa_clear_kernel_node_hotplug()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 RAS changes from Ingo Molnar: "The main changes in this cycle were: - Simplify the CMCI storm logic on Intel CPUs after yet another report about a race in the code (Borislav Petkov) - Enable the MCE threshold irq on AMD CPUs by default (Aravind Gopalakrishnan) - Add AMD-specific MCE-severity grading function. Further error recovery actions will be based on its output (Aravind Gopalakrishnan) - Documentation updates (Borislav Petkov) - ... assorted fixes and cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/severity: Fix warning about indented braces x86/mce: Define mce_severity function pointer x86/mce: Add an AMD severities-grading function x86/mce: Reindent __mcheck_cpu_apply_quirks() properly x86/mce: Use safe MSR accesses for AMD quirk x86/MCE/AMD: Enable thresholding interrupts by default if supported x86/MCE: Make mce_panic() fatal machine check msg in the same pattern x86/MCE/intel: Cleanup CMCI storm logic Documentation/acpi/einj: Correct and streamline text x86/MCE/AMD: Drop bogus const modifier from AMD's bank4_names()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 platform change from Ingo Molnar: "An Intel Quark SoC fix" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/quark: Run IMR self-test on IMR capble hw only
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm changes from Ingo Molnar: "The main changes in this cycle were: - reduce the x86/32 PAE per task PGD allocation overhead from 4K to 0.032k (Fenghua Yu) - early_ioremap/memunmap() usage cleanups (Juergen Gross) - gbpages support cleanups (Luis R Rodriguez) - improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to increase randomization by 3 bits (per bootup) (Hector Marco-Gisbert) - misc fixlets" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Improve AMD Bulldozer ASLR workaround x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion init.h: Clean up the __setup()/early_param() macros x86/mm: Simplify probe_page_size_mask() x86/mm: Further simplify 1 GB kernel linear mappings handling x86/mm: Use early_param_on_off() for direct_gbpages init.h: Add early_param_on_off() x86/mm: Simplify enabling direct_gbpages x86/mm: Use IS_ENABLED() for direct_gbpages x86/mm: Unexport set_memory_ro() and set_memory_rw() x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c x86/mm: Use early_memunmap() instead of early_iounmap() x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode changes from Ingo Molnar: "Microcode driver updates: mostly cleanups but also some fixes (Borislav Petkov)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/amd: Drop the pci_ids.h dependency x86/microcode/intel: Fix printing of microcode blobs in show_saved_mc() x86/microcode/intel: Check scan_microcode()'s retval x86/microcode/intel: Sanitize microcode_pointer() x86/microcode/intel: Move mc arg last in get_matching_{microcode|sig} x86/microcode/intel: Simplify generic_load_microcode_early() x86/microcode: Consolidate family,model, ... code x86/microcode/intel: Rename update_match_revision() x86/microcode/intel: Sanitize _save_mc() x86/microcode/intel: Make _save_mc() return the updated saved count x86/microcode/intel: Simplify load_ucode_intel_bsp() x86/microcode/intel: Get rid of last arg to load_ucode_intel_bsp() x86/microcode/intel: Do the mc_saved_src NULL check first x86/microcode/intel: Check if microcode was found before applying x86/microcode/intel: Fix out of bounds memory access to the extended header
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu changes from Ingo Molnar: "Various x86 FPU handling cleanups, refactorings and fixes (Borislav Petkov, Oleg Nesterov, Rik van Riel)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/fpu: Kill eager_fpu_init_bp() x86/fpu: Don't allocate fpu->state for swapper/0 x86/fpu: Rename drop_init_fpu() to fpu_reset_state() x86/fpu: Fold __drop_fpu() into its sole user x86/fpu: Don't abuse drop_init_fpu() in flush_thread() x86/fpu: Use restore_init_xstate() instead of math_state_restore() on kthread exec x86/fpu: Introduce restore_init_xstate() x86/fpu: Document user_fpu_begin() x86/fpu: Factor out memset(xstate, 0) in fpu_finit() paths x86/fpu: Change xstateregs_get()/set() to use ->xsave.i387 rather than ->fxsave x86/fpu: Don't abuse FPU in kernel threads if use_eager_fpu() x86/fpu: Always allow FPU in interrupt if use_eager_fpu() x86/fpu: __kernel_fpu_begin() should clear fpu_owner_task even if use_eager_fpu() x86/fpu: Also check fpu_lazy_restore() when use_eager_fpu() x86/fpu: Use task_disable_lazy_fpu_restore() helper x86/fpu: Use an explicit if/else in switch_fpu_prepare() x86/fpu: Introduce task_disable_lazy_fpu_restore() helper x86/fpu: Move lazy restore functions up a few lines x86/fpu: Change math_error() to use unlazy_fpu(), kill (now) unused save_init_fpu() x86/fpu: Don't do __thread_fpu_end() if use_eager_fpu() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 debug changes from Ingo Molnar: "Stack printing fixlets" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kernel: Use kstack_end() in dumpstack_64.c x86/kernel: Fix output of show_stack_log_lvl()
-