Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Pull HID updates from Jiri Kosina:

 - hid driver transport cleanup, finalizing the long-desired decoupling
   of core from transport layers, by Benjamin Tissoires and Henrik
   Rydberg

 - support for hybrid finger/pen multitouch HID devices, by Benjamin
   Tissoires

 - fix for long-standing issue in Logitech unifying driver sometimes not
   inializing properly due to device specifics, by Andrew de los Reyes

 - Wii remote driver updates to support 2nd generation of devices, by
   David Herrmann

 - support for Apple IR remote

 - roccat driver now supports new devices (Roccat Kone Pure, IskuFX), by
   Stefan Achatz

 - debugfs locking fixes in hid debug interface, by Jiri Kosina

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits)
  HID: protect hid_debug_list
  HID: debug: break out hid_dump_report() into hid-debug
  HID: Add PID for Japanese version of NE4K keyboard
  HID: hid-lg4ff add support for new version of DFGT wheel
  HID: icade: u16 which never < 0
  HID: clarify Magic Mouse Kconfig description
  HID: appleir: add support for Apple ir devices
  HID: roccat: added media key support for Kone
  HID: hid-lenovo-tpkbd: remove doubled hid_get_drvdata
  HID: i2c-hid: fix length for set/get report in i2c hid
  HID: wiimote: parse reduced status reports
  HID: wiimote: add 2nd generation Wii Remote IDs
  HID: wiimote: use unique battery names
  HID: hidraw: warn if userspace headers are outdated
  HID: multitouch: force BTN_STYLUS for pen devices
  HID: multitouch: append " Pen" to the name of the stylus input
  HID: multitouch: add handling for pen in dual-sensors device
  HID: multitouch: change touch sensor detection in mt_input_configured()
  HID: multitouch: do not map usage from non used reports
  HID: multitouch: breaks out touch handling in specific functions
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...

Pull x86 RAS changes from Ingo Molnar:

 - Add an Intel CMCI hotplug fix

 - Add AMD family 16h EDAC support

 - Make the AMD MCE banks code more flexible for virtual environments

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  amd64_edac: Add Family 16h support
  x86/mce: Rework cmci_rediscover() to play well with CPU hotplug
  x86, MCE, AMD: Use MCG_CAP MSR to find out number of banks on AMD
  x86, MCE, AMD: Replace shared_bank array with is_shared_bank() helper

Pull x86 platform changes from Ingo Molnar:
 "Small fixes and cleanups all over the map"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Drop unneeded include <asm/dmi.h>
  x86/olpc/xo1/sci: Don't call input_free_device() after input_unregister_device()
  x86/platform/intel/mrst: Remove cast for kmalloc() return value
  x86/platform/uv: Replace kmalloc() & memset with kzalloc()

Pull x86 paravirt update from Ingo Molnar:
 "Various paravirtualization related changes - the biggest one makes
  guest support optional via CONFIG_HYPERVISOR_GUEST"

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, wakeup, sleep: Use pvops functions for changing GDT entries
  x86, xen, gdt: Remove the pvops variant of store_gdt.
  x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed
  x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed.
  x86: Make Linux guest support optional
  x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu

Pull x86 mm changes from Ingo Molnar:
 "Misc smaller changes all over the map"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu/dmar: Remove warning for HPET scope type
  x86/mm/gart: Drop unnecessary check
  x86/mm/hotplug: Put kernel_physical_mapping_remove() declaration in CONFIG_MEMORY_HOTREMOVE
  x86/mm/fixmap: Remove unused FIX_CYCLONE_TIMER
  x86/mm/numa: Simplify some bit mangling
  x86/mm: Re-enable DEBUG_TLBFLUSH for X86_32
  x86/mm/cpa: Cleanup split_large_page() and its callee
  x86: Drop always empty .text..page_aligned section

Pull perparatory x86 kasrl changes from Ingo Molnar:
 "This contains changes from the ongoing KASLR work, by Kees Cook.

  The main changes are the use of a read-only IDT on x86 (which
  decouples the userspace visible virtual IDT address from the physical
  address), and a rework of ELF relocation support, in preparation of
  random, boot-time kernel image relocation."

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Refactor the relocs tool to merge 32- and 64-bit ELF
  x86, relocs: Build separate 32/64-bit tools
  x86, relocs: Add 64-bit ELF support to relocs tool
  x86, relocs: Consolidate processing logic
  x86, relocs: Generalize ELF structure names
  x86: Use a read-only IDT alias on all CPUs

Pull x86 debug update from Ingo Molnar:
 "Two small changes: a documentation update and a constification"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, early-printk: Update earlyprintk documentation (and kill x86 copy)
  x86: Constify a few items

Pull x86 cpuid changes from Ingo Molnar:
 "The biggest change is x86 CPU bug handling refactoring and cleanups,
  by Borislav Petkov"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, CPU, AMD: Drop useless label
  x86, AMD: Correct {rd,wr}msr_amd_safe warnings
  x86: Fold-in trivial check_config function
  x86, cpu: Convert AMD Erratum 400
  x86, cpu: Convert AMD Erratum 383
  x86, cpu: Convert Cyrix coma bug detection
  x86, cpu: Convert FDIV bug detection
  x86, cpu: Convert F00F bug detection
  x86, cpu: Expand cpufeature facility to include cpu bugs

Pull x86 cleanups from Ingo Molnar:
 "Misc smaller cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Fix spelling, put space between a numeral and its units
  x86/lib: Fix spelling in the comments
  x86, quirks: Shut-up a long-standing gcc warning
  x86, msr: Unify variable names
  x86-64, docs, mm: Add vsyscall range to virtual address space layout
  x86: Drop KERNEL_IMAGE_START
  x86_64: Use __BOOT_DS instead_of __KERNEL_DS for safety

Pull extable dmesg fixlet from Ingo Molnar:
 "Small tweak to reduce kmsg boot time spam"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  extable: Flip the sorting message

Pull core timer updates from Ingo Molnar:
 "The main changes in this cycle's merge are:

   - Implement shadow timekeeper to shorten in kernel reader side
     blocking, by Thomas Gleixner.

   - Posix timers enhancements by Pavel Emelyanov:

   - allocate timer ID per process, so that exact timer ID allocations
     can be re-created be checkpoint/restore code.

   - debuggability and tooling (/proc/PID/timers, etc.) improvements.

   - suspend/resume enhancements by Feng Tang: on certain new Intel Atom
     processors (Penwell and Cloverview), there is a feature that the
     TSC won't stop in S3 state, so the TSC value won't be reset to 0
     after resume.  This can be taken advantage of by the generic via
     the CLOCK_SOURCE_SUSPEND_NONSTOP flag: instead of using the RTC to
     recover/approximate sleep time, the main (and precise) clocksource
     can be used.

   - Fix /proc/timer_list for 4096 CPUs by Nathan Zimmer: on so many
     CPUs the file goes beyond 4MB of size and thus the current
     simplistic seqfile approach fails.  Convert /proc/timer_list to a
     proper seq_file with its own iterator.

   - Cleanups and refactorings of the core timekeeping code by John
     Stultz.

   - International Atomic Clock time is managed by the NTP code
     internally currently but not exposed externally.  Separate the TAI
     code out and add CLOCK_TAI support and TAI support to the hrtimer
     and posix-timer code, by John Stultz.

   - Add deep idle support enhacement to the broadcast clockevents core
     timer code, by Daniel Lezcano: add an opt-in CLOCK_EVT_FEAT_DYNIRQ
     clockevents feature (which will be utilized by future clockevents
     driver updates), which allows the use of IRQ affinities to avoid
     spurious wakeups of idle CPUs - the right CPU with an expiring
     timer will be woken.

   - Add new ARM bcm281xx clocksource driver, by Christian Daudt

   - ... various other fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  clockevents: Set dummy handler on CPU_DEAD shutdown
  timekeeping: Update tk->cycle_last in resume
  posix-timers: Remove unused variable
  clockevents: Switch into oneshot mode even if broadcast registered late
  timer_list: Convert timer list to be a proper seq_file
  timer_list: Split timer_list_show_tickdevices
  posix-timers: Show sigevent info in proc file
  posix-timers: Introduce /proc/PID/timers file
  posix timers: Allocate timer id per process (v2)
  timekeeping: Make sure to notify hrtimers when TAI offset changes
  hrtimer: Fix ktime_add_ns() overflow on 32bit architectures
  hrtimer: Add expiry time overflow check in hrtimer_interrupt
  timekeeping: Shorten seq_count region
  timekeeping: Implement a shadow timekeeper
  timekeeping: Delay update of clock->cycle_last
  timekeeping: Store cycle_last value in timekeeper struct as well
  ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state
  timekeeping: Simplify tai updating from do_adjtimex
  timekeeping: Hold timekeepering locks in do_adjtimex and hardpps
  timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()
  ...

Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...

Pull scheduler changes from Ingo Molnar:
 "The main changes in this development cycle were:

   - full dynticks preparatory work by Frederic Weisbecker

   - factor out the cpu time accounting code better, by Li Zefan

   - multi-CPU load balancer cleanups and improvements by Joonsoo Kim

   - various smaller fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  sched: Fix init NOHZ_IDLE flag
  sched: Prevent to re-select dst-cpu in load_balance()
  sched: Rename load_balance_tmpmask to load_balance_mask
  sched: Move up affinity check to mitigate useless redoing overhead
  sched: Don't consider other cpus in our group in case of NEWLY_IDLE
  sched: Explicitly cpu_idle_type checking in rebalance_domains()
  sched: Change position of resched_cpu() in load_balance()
  sched: Fix wrong rq's runnable_avg update with rt tasks
  sched: Document task_struct::personality field
  sched/cpuacct/UML: Fix header file dependency bug on the UML build
  cgroup: Kill subsys.active flag
  sched/cpuacct: No need to check subsys active state
  sched/cpuacct: Initialize cpuacct subsystem earlier
  sched/cpuacct: Initialize root cpuacct earlier
  sched/cpuacct: Allocate per_cpu cpuusage for root cpuacct statically
  sched/cpuacct: Clean up cpuacct.h
  sched/cpuacct: Remove redundant NULL checks in cpuacct_acount_field()
  sched/cpuacct: Remove redundant NULL checks in cpuacct_charge()
  sched/cpuacct: Add cpuacct_acount_field()
  sched/cpuacct: Add cpuacct_init()
  ...

Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle are mostly related to preparatory work
  for the full-dynticks work:

   - Remove restrictions on no-CBs CPUs, make RCU_FAST_NO_HZ take
     advantage of numbered callbacks, do callback accelerations based on
     numbered callbacks.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/960

   - RCU documentation updates.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/570

   - Miscellaneous fixes.  Posted to LKML at
        https://lkml.org/lkml/2013/3/18/594"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  rcu: Make rcu_accelerate_cbs() note need for future grace periods
  rcu: Abstract rcu_start_future_gp() from rcu_nocb_wait_gp()
  rcu: Rename n_nocb_gp_requests to need_future_gp
  rcu: Push lock release to rcu_start_gp()'s callers
  rcu: Repurpose no-CBs event tracing to future-GP events
  rcu: Rearrange locking in rcu_start_gp()
  rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks
  rcu: Accelerate RCU callbacks at grace-period end
  rcu: Export RCU_FAST_NO_HZ parameters to sysfs
  rcu: Distinguish "rcuo" kthreads by RCU flavor
  rcu: Add event tracing for no-CBs CPUs' grace periods
  rcu: Add event tracing for no-CBs CPUs' callback registration
  rcu: Introduce proper blocking to no-CBs kthreads GP waits
  rcu: Provide compile-time control for no-CBs CPUs
  rcu: Tone down debugging during boot-up and shutdown.
  rcu: Add softirq-stall indications to stall-warning messages
  rcu: Documentation update
  rcu: Make bugginess of code sample more evident
  rcu: Fix hlist_bl_set_first_rcu() annotation
  rcu: Delete unused rcu_node "wakemask" field
  ...

During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig changes from Steven Rostedt:
 "A bug was recently found in the make localmodconfig where it would
  miss dependencies of config files are include in other config files
  inside an if statement.

  Also added a debug print that helped in solving this bug."

* tag 'localmodconfig-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Process source kconfig files as they are found
  localmodconfig: Add debug prints for dependencies of module configs

* patchwork: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Conflicts:
	drivers/media/pci/cx25821/cx25821-video.c
	drivers/media/platform/Kconfig

Linux 3.9

* tag 'v3.9': (1099 commits)
  Linux 3.9
  vm: add no-mmu vm_iomap_memory() stub
  efivars: only check for duplicates on the registered list
  TTY: fix atime/mtime regression
  aio: fix possible invalid memory access when DEBUG is enabled
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
  Revert "gpio: pxa: set initcall level to module init"
  efi: Check EFI revision in setup_efi_vars
  x86, efi: Fix a build warning
  Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
  kernel/hz.bc: ignore.
  Linux 3.9-rc8
  events: Protect access via task_subsys_state_check()
  net: fix incorrect credentials passing
  x86, microcode: Verify the family before dispatching microcode patching
  ...

Conflicts:
	drivers/hid/Kconfig

Conflicts:
	drivers/hid/hid-multitouch.c

Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', 'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus

Accesses to hid_device->hid_debug_list are not serialized properly, which
could result in SMP concurrency issues when HID debugfs events are accessesed
by multiple userspace processess.

Serialize all the list operations by a mutex.

Spotted by Al Viro.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

No semantic changes, but hid_dump_report should be in hid-debug.c, not
in hid-core.c

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge second batch of fixes from Andrew Morton:

 - various misc bits

 - some printk updates

 - a new "SRAM" driver.

 - MAINTAINERS updates

 - the backlight driver queue

 - checkpatch updates

 - a few init/ changes

 - a huge number of drivers/rtc changes

 - fatfs updates

 - some lib/idr.c work

 - some renaming of the random driver interfaces

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (285 commits)
  net: rename random32 to prandom
  net/core: remove duplicate statements by do-while loop
  net/core: rename random32() to prandom_u32()
  net/netfilter: rename random32() to prandom_u32()
  net/sched: rename random32() to prandom_u32()
  net/sunrpc: rename random32() to prandom_u32()
  scsi: rename random32() to prandom_u32()
  lguest: rename random32() to prandom_u32()
  uwb: rename random32() to prandom_u32()
  video/uvesafb: rename random32() to prandom_u32()
  mmc: rename random32() to prandom_u32()
  drbd: rename random32() to prandom_u32()
  kernel/: rename random32() to prandom_u32()
  mm/: rename random32() to prandom_u32()
  lib/: rename random32() to prandom_u32()
  x86: rename random32() to prandom_u32()
  x86: pageattr-test: remove srandom32 call
  uuid: use prandom_bytes()
  raid6test: use prandom_bytes()
  sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic()
  ...

Pull cgroup updates from Tejun Heo:

 - Fixes and a lot of cleanups.  Locking cleanup is finally complete.
   cgroup_mutex is no longer exposed to individual controlelrs which
   used to cause nasty deadlock issues.  Li fixed and cleaned up quite a
   bit including long standing ones like racy cgroup_path().

 - device cgroup now supports proper hierarchy thanks to Aristeu.

 - perf_event cgroup now supports proper hierarchy.

 - A new mount option "__DEVEL__sane_behavior" is added.  As indicated
   by the name, this option is to be used for development only at this
   point and generates a warning message when used.  Unfortunately,
   cgroup interface currently has too many brekages and inconsistencies
   to implement a consistent and unified hierarchy on top.  The new flag
   is used to collect the behavior changes which are necessary to
   implement consistent unified hierarchy.  It's likely that this flag
   won't be used verbatim when it becomes ready but will be enabled
   implicitly along with unified hierarchy.

   The option currently disables some of broken behaviors in cgroup core
   and also .use_hierarchy switch in memcg (will be routed through -mm),
   which can be used to make very unusual hierarchy where nesting is
   partially honored.  It will also be used to implement hierarchy
   support for blk-throttle which would be impossible otherwise without
   introducing a full separate set of control knobs.

   This is essentially versioning of interface which isn't very nice but
   at this point I can't see any other options which would allow keeping
   the interface the same while moving towards hierarchy behavior which
   is at least somewhat sane.  The planned unified hierarchy is likely
   to require some level of adaptation from userland anyway, so I think
   it'd be best to take the chance and update the interface such that
   it's supportable in the long term.

   Maintaining the existing interface does complicate cgroup core but
   shouldn't put too much strain on individual controllers and I think
   it'd be manageable for the foreseeable future.  Maybe we'll be able
   to drop it in a decade.

Fix up conflicts (including a semantic one adding a new #include to ppc
that was uncovered by header the file changes) as per Tejun.

* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits)
  cpuset: fix compile warning when CONFIG_SMP=n
  cpuset: fix cpu hotplug vs rebuild_sched_domains() race
  cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn()
  cgroup: restore the call to eventfd->poll()
  cgroup: fix use-after-free when umounting cgroupfs
  cgroup: fix broken file xattrs
  devcg: remove parent_cgroup.
  memcg: force use_hierarchy if sane_behavior
  cgroup: remove cgrp->top_cgroup
  cgroup: introduce sane_behavior mount option
  move cgroupfs_root to include/linux/cgroup.h
  cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix
  cgroup: make cgroup_path() not print double slashes
  Revert "cgroup: remove bind() method from cgroup_subsys."
  perf: make perf_event cgroup hierarchical
  cgroup: implement cgroup_is_descendant()
  cgroup: make sure parent won't be destroyed before its children
  cgroup: remove bind() method from cgroup_subsys.
  devcg: remove broken_hierarchy tag
  cgroup: remove cgroup_lock_is_held()
  ...

Pull workqueue updates from Tejun Heo:
 "A lot of activities on workqueue side this time.  The changes achieve
  the followings.

   - WQ_UNBOUND workqueues - the workqueues which are per-cpu - are
     updated to be able to interface with multiple backend worker pools.
     This involved a lot of churning but the end result seems actually
     neater as unbound workqueues are now a lot closer to per-cpu ones.

   - The ability to interface with multiple backend worker pools are
     used to implement unbound workqueues with custom attributes.
     Currently the supported attributes are the nice level and CPU
     affinity.  It may be expanded to include cgroup association in
     future.  The attributes can be specified either by calling
     apply_workqueue_attrs() or through /sys/bus/workqueue/WQ_NAME/* if
     the workqueue in question is exported through sysfs.

     The backend worker pools are keyed by the actual attributes and
     shared by any workqueues which share the same attributes.  When
     attributes of a workqueue are changed, the workqueue binds to the
     worker pool with the specified attributes while leaving the work
     items which are already executing in its previous worker pools
     alone.

     This allows converting custom worker pool implementations which
     want worker attribute tuning to use workqueues.  The writeback pool
     is already converted in block tree and there are a couple others
     are likely to follow including btrfs io workers.

   - WQ_UNBOUND's ability to bind to multiple worker pools is also used
     to make it NUMA-aware.  Because there's no association between work
     item issuer and the specific worker assigned to execute it, before
     this change, using unbound workqueue led to unnecessary cross-node
     bouncing and it couldn't be helped by autonuma as it requires tasks
     to have implicit node affinity and workers are assigned randomly.

     After these changes, an unbound workqueue now binds to multiple
     NUMA-affine worker pools so that queued work items are executed in
     the same node.  This is turned on by default but can be disabled
     system-wide or for individual workqueues.

     Crypto was requesting NUMA affinity as encrypting data across
     different nodes can contribute noticeable overhead and doing it
     per-cpu was too limiting for certain cases and IO throughput could
     be bottlenecked by one CPU being fully occupied while others have
     idle cycles.

  While the new features required a lot of changes including
  restructuring locking, it didn't complicate the execution paths much.
  The unbound workqueue handling is now closer to per-cpu ones and the
  new features are implemented by simply associating a workqueue with
  different sets of backend worker pools without changing queue,
  execution or flush paths.

  As such, even though the amount of change is very high, I feel
  relatively safe in that it isn't likely to cause subtle issues with
  basic correctness of work item execution and handling.  If something
  is wrong, it's likely to show up as being associated with worker pools
  with the wrong attributes or OOPS while workqueue attributes are being
  changed or during CPU hotplug.

  While this creates more backend worker pools, it doesn't add too many
  more workers unless, of course, there are many workqueues with unique
  combinations of attributes.  Assuming everything else is the same,
  NUMA awareness costs an extra worker pool per NUMA node with online
  CPUs.

  There are also a couple things which are being routed outside the
  workqueue tree.

   - block tree pulled in workqueue for-3.10 so that writeback worker
     pool can be converted to unbound workqueue with sysfs control
     exposed.  This simplifies the code, makes writeback workers
     NUMA-aware and allows tuning nice level and CPU affinity via sysfs.

   - The conversion to workqueue means that there's no 1:1 association
     between a specific worker, which makes writeback folks unhappy as
     they want to be able to tell which filesystem caused a problem from
     backtrace on systems with many filesystems mounted.  This is
     resolved by allowing work items to set debug info string which is
     printed when the task is dumped.  As this change involves unifying
     implementations of dump_stack() and friends in arch codes, it's
     being routed through Andrew's -mm tree."

* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (84 commits)
  workqueue: use kmem_cache_free() instead of kfree()
  workqueue: avoid false negative WARN_ON() in destroy_workqueue()
  workqueue: update sysfs interface to reflect NUMA awareness and a kernel param to disable NUMA affinity
  workqueue: implement NUMA affinity for unbound workqueues
  workqueue: introduce put_pwq_unlocked()
  workqueue: introduce numa_pwq_tbl_install()
  workqueue: use NUMA-aware allocation for pool_workqueues
  workqueue: break init_and_link_pwq() into two functions and introduce alloc_unbound_pwq()
  workqueue: map an unbound workqueues to multiple per-node pool_workqueues
  workqueue: move hot fields of workqueue_struct to the end
  workqueue: make workqueue->name[] fixed len
  workqueue: add workqueue->unbound_attrs
  workqueue: determine NUMA node of workers accourding to the allowed cpumask
  workqueue: drop 'H' from kworker names of unbound worker pools
  workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]
  workqueue: move pwq_pool_locking outside of get/put_unbound_pool()
  workqueue: fix memory leak in apply_workqueue_attrs()
  workqueue: fix unbound workqueue attrs hashing / comparison
  workqueue: fix race condition in unbound workqueue free path
  workqueue: remove pwq_lock which is no longer used
  ...

Pull async update from Tejun Heo:
 "This contains three cleanup patches for async from Lai.  All three
  patches are essentially cosmetic."

* 'for-3.10-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  async: rename and redefine async_func_ptr
  async: remove unused @node from struct async_domain
  async: simplify lowest_in_progress()

Pull percpu patch from Tejun Heo:
 "A puny pull request for percpu.  We were expecting more cleanup
  patches but didn't happen this time, so just a single patch adding
  documentation from Christoph."

* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: add documentation on this_cpu operations

Commit 496f2f93

 ("random32: rename random32 to prandom") renamed
random32() and srandom32() to prandom_u32() and prandom_seed()
respectively.

net_random() and net_srandom() need to be redefined with prandom_* in
order to finish the naming transition.

While I'm at it, enclose macro argument of net_srandom() with parenthesis.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove duplicate statements by using do-while loop instead of while loop.

- A;
- while (e) {
+ do {
	A;
- }
+ } while (e);

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: James Smart <james.smart@emulex.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>