- May 17, 2016
-
-
Vitaly Kuznetsov authored
netvsc_link_change() can race with netvsc_change_mtu() or netvsc_set_channels() as these functions destroy struct netvsc_device and rndis filter. Use start_remove flag for syncronization. As netvsc_change_mtu()/netvsc_set_channels() are called with rtnl lock held we need to take it before checking start_remove value in netvsc_link_change(). Reported-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vitaly Kuznetsov authored
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Uwe Kleine-König authored
The framework only asserts (for now) that the reset gpio is not active. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 16, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-05-14 This series contains updates to i40e and i40evf. Kevin adds support to disable link on all ports and changes bits set for telling firmware the PHY needs to be modified by the driver. Anjali adds a feature to enable/disable all multicast for a trusted VF. Added priv-flag knob to configure global true promiscuous support. Shannon adds the support code for calling the admin queue API call aq_set_switch_config(). Mitch modifies the VF, to log a message if an untrusted VF attempts to configure promiscuous mode, but lies to it and returns everything is ok instead of returning an error. Corrects the logic for reporting the receive packet hash. Fixed the adding of a broadcast filter for VFs, since that all VSIs are configured to receive broadcasts as default, so do not need to add a filter. Catherine refactors the ethtool get_settings to report the possible supported link modes from what we know about the current PHY type and that with the firmware supported PHY types. Jacob changes the driver to use WARN_ONCE in order to highlight the issue, but do not display a warning every time when receive hang message is received. Akeem corrects receive ptype payload layer for non_tunneled IPv6, when it should be layer 4 for UDP, instead of layer 3. Dan Carpenter fixes an uninitialized variable bug. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: updates for net-next. Non-critical bug fixes, improvements, a new ethtool feature, and a new device ID. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Ajit Khaparde (2): bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO bnxt_en: Report PCIe link speed and width during driver load Michael Chan (6): bnxt_en: Reduce maximum ring pages if page size is 64K. bnxt_en: Improve the delay logic for firmware response. bnxt_en: Fix length value in dmesg log firmware error message. bnxt_en: Simplify and improve unsupported SFP+ module reporting. bnxt_en: Add BCM57314 device ID. bnxt_en: Use dma_rmb() instead of rmb(). Satish Baddipadige (1): bnxt_en: Fix invalid max channel parameter in ethtool -l. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Use the weaker but more appropriate dma_rmb() to order the reading of the completion ring. Suggested-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current code is more complicated than necessary and can only report unsupported SFP+ module if it is plugged in after the device is up. Rename bnxt_port_module_event() to bnxt_get_port_module_status(). We already have the current module_status in the link_info structure, so just check that and report any unsupported SFP+ module status. Delete the unnecessary last_port_module_event. Call this function at the end of bnxt_open to report unsupported module already plugged in. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The len value in the hwrm error message is wrong. Use the properly adjusted value in the variable len. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current code has 2 problems: 1. The maximum wait time is not long enough. It is about 60% of the duration specified by the firmware. It is calling usleep_range(600, 800) for every 1 msec we are supposed to wait. 2. The granularity of the delay is too coarse. Many simple firmware commands finish in 25 usec or less. We fix these 2 issues by multiplying the original 1 msec loop counter by 40 and calling usleep_range(25, 40) for each iteration. There is also a second delay loop to wait for the last DMA word to complete. This delay loop should be a very short 5 usec wait. This change results in much faster bring-up/down time: Before the patch: time ip link set p4p1 up real 0m0.120s user 0m0.001s sys 0m0.009s After the patch: time ip link set p4p1 up real 0m0.030s user 0m0.000s sys 0m0.010s Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The chip supports 4K/8K/64K page sizes for the rings and we try to match it to the CPU PAGE_SIZE. The current page size limits for the rings are based on 4K/8K page size. If the page size is 64K, these limits are too large. Reduce them appropriately. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Add code to log a message during driver load indicating PCIe link speed and width. The log message will look like this: bnxt_en 0000:86:00.0 eth0: PCIe: Speed 8.0GT/s Width x8 Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Add support to fetch the SFP EEPROM settings from the firmware and display it via the ethtool -m command. We support SFP+ and QSFP modules. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Signed-off-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Satish Baddipadige authored
When there is only 1 MSI-X vector or in INTA mode, tx and rx pre-set max channel parameters are shown incorrectly in ethtool -l. With only 1 vector, bnxt_get_max_rings() will return -ENOMEM. bnxt_get_channels should check this return value, and set max_rx/max_tx to 0 if it is non-zero. Signed-off-by:
Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 15, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix mvneta/bm dependencies, from Arnd Bergmann. 2) RX completion hw bug workaround in bnxt_en, from Michael Chan. 3) Kernel pointer leak in nf_conntrack, from Linus. 4) Hoplimit route attribute limits not enforced properly, from Paolo Abeni. 5) qlcnic driver NULL deref fix from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: arm64: bpf: jit JMP_JSET_{X,K} net/route: enforce hoplimit max value nf_conntrack: avoid kernel pointer value leak in slab name drivers: net: xgene: fix register offset drivers: net: xgene: fix statistics counters race condition drivers: net: xgene: fix ununiform latency across queues drivers: net: xgene: fix sharing of irqs drivers: net: xgene: fix IPv4 forward crash xen-netback: fix extra_info handling in xenvif_tx_err() net: mvneta: bm: fix dependencies again bnxt_en: Add workaround to detect bad opaque in rx completion (part 2) bnxt_en: Add workaround to detect bad opaque in rx completion (part 1) qlcnic: potential NULL dereference in qlcnic_83xx_get_minidump_template()
-
Florian Fainelli authored
Switchdev has been around for quite a while now, putting "EXPERIMENTAL" in the description is no longer accurate, drop it. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zi Shen Lim authored
Original implementation commit e54bcde3 ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde3 ("arm64: eBPF JIT compiler") Signed-off-by:
Zi Shen Lim <zlim.lnx@gmail.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
The slab name ends up being visible in the directory structure under /sys, and even if you don't have access rights to the file you can see the filenames. Just use a 64-bit counter instead of the pointer to the 'net' structure to generate a unique name. This code will go away in 4.7 when the conntrack code moves to a single kmemcache, but this is the backportable simple solution to avoiding leaking kernel pointers to user space. Fixes: 5b3501fa ("netfilter: nf_conntrack: per netns nf_conntrack_cachep") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Overlayfs fixes from Miklos, assorted fixes from me. Stable fodder of varying severity, all sat in -next for a while" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: ignore permissions on underlying lookup vfs: add lookup_hash() helper vfs: rename: check backing inode being equal vfs: add vfs_select_inode() helper get_rock_ridge_filename(): handle malformed NM entries ecryptfs: fix handling of directory opening atomic_open(): fix the handling of create_error fix the copy vs. map logics in blk_rq_map_user_iov() do_splice_to(): cap the size before passing to ->splice_read()
-
- May 14, 2016
-
-
Dan Carpenter authored
We removed this initialization but it is required. Let's put it back. Fixes: 895106a5 ('i40e: trivial fixes') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bimmy Pujari authored
Signed-off-by:
Bimmy Pujari <bimmy.pujari@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
Now that all VSIs are configured to receive broadcasts as default, we don't need to add a filter. This eliminates an annoying but harmless error message each time VFs are created or reset. Change-ID: I4cd6339684df45b0d2722133eeb84c14fa93ea19 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
This logic is inverted. If the RXHASH flag is set, then we should go ahead and call skb_set_hash. Change-ID: Ib2e30356dced1d3e939c8061ab6ad5bd94197e7c Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ashish Shah authored
For the SR-IOV VSIs, when the queue filtering section is valid, the RSS LUT needs to be set to use the VSI specific lookup table (otherwise it will use the PF RSS LUT table). Change-ID: Ia9377cc818078238a75c3bdeade1b593a91b3480 Signed-off-by:
Ashish Shah <ashish.n.shah@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G Abodunrin authored
This patch corrects Rx ptype payload layer for non_tunneled ipv6. It should be layer 4 for UDP, instead of layer 3. Change-ID: I9382e4458ab3c4e58f6d2e9f195d5d4ee513805e Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Use WARN_ONCE in order to highlight the issue, but don't display a warning every time. The user should be able to see the ethtool counter we created if necessary to see how often it is occurring. Change-ID: I40c4ea159819b64a7d33b7f5716749089791533a Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Previously we were only looking at the FW supported PHY types if link was down, because we want to be more specific when link is up. This refactor changes this. When link is down, we still rely on the FW supported PHY types, but when link is up, we select the possible supported link modes from what we know about the current PHY type, and AND that with the FW supported PHY types. Change-ID: Ice5dad83f2a17932b0b8b59f07439696ad6aa013 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
If an untrusted VF attempts to configure promiscuous mode, log a message pointing out its naughty behavior. But then, instead of returning an error to the offender, just lie to it and say everything's OK. It will continue on its way, thinking it's in promiscuous mode, but receiving no packets except its own. Change-ID: I63369215b1720f3c531eedfc06af86ff8c0e3dc8 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
This patch adds priv-flag knob to configure global true promisc support. With this patch the user can decide the flavor of promiscuous that the VFs will see when promiscuous mode is enabled on the interface. Since this a global setting for the whole device, the priv-flag is exposed only on the first PF of the device. The default is true promisc support is off, which means the promisc mode for the VF will be limited/defport mode. For the PF, we still will be in limited promisc unless in MFP mode irrespective of the flavor picked through this knob. Usage: On PF0 ethtool --show-priv-flags p261p1 Private flags for p261p1: MFP : off LinkPolling : off flow-director-atr : on veb-stats : off hw-atr-eviction : off vf-true-promisc-support: off to enable setting true promisc ethtool --set-priv-flags p261p1 vf-true-promisc-support on At this point if the VF is set to trust and promisc is enabled on the VF through ip link set ... promisc on The VF/VFs will be able to see ALL ingress traffic Change-Id: I8fac4b6eb1af9ca77b5376b79c50bdce5055bd94 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add the support code for calling the AdminQ API call aq_set_switch_config Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
This patch enables a feature to enable/disable all multicast for a trusted VF. Change-Id: I926eba7f8850c8d40f8ad7e08bbe4056bbd3985f Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Kevin Scott authored
Add flag to tell firmware to disable link on all ports. This patch changes the bits set for telling firmware the PHY needs to be modified by driver. Without this patch, the setting will only set that mode for the current port on the device. Because the MDIO interface is common for the copper device. The command needs to set the mode for all ports. Change-ID: I8baa7da91d384291ac95b41ae1a516604f8eb67f Signed-off-by:
Kevin Scott <kevin.c.scott@intel.com> Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Bug fixes This patch set addresses the following bug fixes that were found during testing. 1. IPv4 forward test crash - drivers: net: xgene: fix IPv4 forward crash 2. Sharing of irqs - drivers: net: xgene: fix sharing of irqs 3. Ununiform latency across queues - drivers: net: xgene: fix ununiform latency across queues 4. Fix statistics counters race condition - drivers: net: xgene: fix statistics counters race condition 5. Correcting register offset and field lengths - drivers: net: xgene: fix register offset v2: Address review comments from v1 - Defer TSO fix, and reposting all other patches from v1 v1: - Initial version ==================== Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes SG_RX_DV_GATE_REG_0_ADDR register offset and ring state field lengths. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes the race condition on updating the statistics counters by moving the counters to the ring structure. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch addresses ununiform latency across queues by adding more queues to match with, upto number of CPU cores. Also, number of interrupts are increased and the channel numbers are reordered. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Since hardware doesn't allow sharing of interrupts, this patch fixes the same by removing IRQF_SHARED flag. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes the crash observed during IPv4 forward test by setting the drop field in the dbptr. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-