- Sep 08, 2005
-
-
John Hawkes authored
Revert the hack introduced last week. Signed-off-by:
John Hawkes <hawkes@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
John Hawkes authored
For a NUMA system with multiple CPUs per node, declaring a cpu-exclusive cpuset that includes only some, but not all, of the CPUs in a node will mangle the sched domain structures. Signed-off-by:
John Hawkes <hawkes@sgi.com> Cc; Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
John Hawkes authored
Signed-off-by:
John Hawkes <hawkes@sgi.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
Now the real motivation for this cpuset mem_exclusive patch series seems trivial. This patch keeps a task in or under one mem_exclusive cpuset from provoking an oom kill of a task under a non-overlapping mem_exclusive cpuset. Since only interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive containment, there is little to gain from oom killing a task under a non-overlapping mem_exclusive cpuset, as almost all kernel and user memory allocation must come from disjoint memory nodes. This patch enables configuring a system so that a runaway job under one mem_exclusive cpuset cannot cause the killing of a job in another such cpuset that might be using very high compute and memory resources for a prolonged time. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
This patch makes use of the previously underutilized cpuset flag 'mem_exclusive' to provide what amounts to another layer of memory placement resolution. With this patch, there are now the following four layers of memory placement available: 1) The whole system (interrupt and GFP_ATOMIC allocations can use this), 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use), 3) The current tasks cpuset (GFP_USER allocations constrained to here), and 4) Specific node placement, using mbind and set_mempolicy. These nest - each layer is a subset (same or within) of the previous. Layer (2) above is new, with this patch. The call used to check whether a zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is extended to take a gfp_mask argument, and its logic is extended, in the case that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if placement is allowed. The definition of GFP_USER, which used to be identical to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous cpuset_gfp_hardwall_flag patch. GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks cpuset, so long as any node therein is not too tight on memory, but will escape to the larger layer, if need be. The intended use is to allow something like a batch manager to handle several jobs, each job in its own cpuset, but using common kernel memory for caches and such. Swapper and oom_kill activity is also constrained to Layer (2). A task in or below one mem_exclusive cpuset should not cause swapping on nodes in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a task in another such cpuset. Heavy use of kernel memory for i/o caching and such by one job should not impact the memory available to jobs in other non-overlapping mem_exclusive cpusets. This patch enables providing hardwall, inescapable cpusets for memory allocations of each job, while sharing kernel memory allocations between several jobs, in an enclosing mem_exclusive cpuset. Like Dinakar's patch earlier to enable administering sched domains using the cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag that had previously done nothing much useful other than restrict what cpuset configurations were allowed. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
Add another GFP flag: __GFP_HARDWALL. A subsequent "cpuset_zone_allowed" patch will use this flag to mark GFP_USER allocations, and distinguish them from GFP_KERNEL allocations. Allocations (such as GFP_USER) marked GFP_HARDWALL are constrainted to the current tasks cpuset. Other allocations (such as GFP_KERNEL) can steal from the possibly larger nearest mem_exclusive cpuset ancestor, if memory is tight on every node in the current cpuset. This patch collides with Mel Gorman's patch to reduce fragmentation in the standard buddy allocator, which adds two GFP flags. This was discussed on linux-mm in July. Most likely, one of his flags for user reclaimable memory can be the same as my __GFP_HARDWALL flag, under some generic name meaning its user address space memory. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
This patch series extends the use of the cpuset attribute 'mem_exclusive' to support cpuset configurations that: 1) allow GFP_KERNEL allocations to come from a potentially larger set of memory nodes than GFP_USER allocations, and 2) can constrain the oom killer to tasks running in cpusets in a specified subtree of the cpuset hierarchy. Here's an example usage scenario. For a few hours or more, a large NUMA system at a University is to be divided in two halves, with a bunch of student jobs running in half the system under some form of batch manager, and with a big research project running in the other half. Each of the student jobs is placed in a small cpuset, but should share the classic Unix time share facilities, such as buffered pages of files in /bin and /usr/lib. The big research project wants no interference whatsoever from the student jobs, and has highly tuned, unusual memory and i/o patterns that intend to make full use of all the main memory on the nodes available to it. In this example, we have two big sibling cpusets, one of which is further divided into a more dynamic set of child cpusets. We want kernel memory allocations constrained by the two big cpusets, and user allocations constrained by the smaller child cpusets where present. And we require that the oom killer not operate across the two halves of this system, or else the first time a student job runs amuck, the big research project will likely be first inline to get shot. Tweaking /proc/<pid>/oom_adj is not ideal -- if the big research project really does run amuck allocating memory, it should be shot, not some other task outside the research projects mem_exclusive cpuset. I propose to extend the use of the 'mem_exclusive' flag of cpusets to manage such scenarios. Let memory allocations for user space (GFP_USER) be constrained by a tasks current cpuset, but memory allocations for kernel space (GFP_KERNEL) by constrained by the nearest mem_exclusive ancestor of the current cpuset, even though kernel space allocations will still _prefer_ to remain within the current tasks cpuset, if memory is easily available. Let the oom killer be constrained to consider only tasks that are in overlapping mem_exclusive cpusets (it won't help much to kill a task that normally cannot allocate memory on any of the same nodes as the ones on which the current task can allocate.) The current constraints imposed on setting mem_exclusive are unchanged. A cpuset may only be mem_exclusive if its parent is also mem_exclusive, and a mem_exclusive cpuset may not overlap any of its siblings memory nodes. This patch was presented on linux-mm in early July 2005, though did not generate much feedback at that time. It has been built for a variety of arch's using cross tools, and built, booted and tested for function on SN2 (ia64). There are 4 patches in this set: 1) Some minor cleanup, and some improvements to the code layout of one routine to make subsequent patches cleaner. 2) Add another GFP flag - __GFP_HARDWALL. It marks memory requests for USER space, which are tightly confined by the current tasks cpuset. 3) Now memory requests (such as KERNEL) that not marked HARDWALL can if short on memory, look in the potentially larger pool of memory defined by the nearest mem_exclusive ancestor cpuset of the current tasks cpuset. 4) Finally, modify the oom killer to skip any task whose mem_exclusive cpuset doesn't overlap ours. Patch (1), the one time I looked on an SN2 (ia64) build, actually saved 32 bytes of kernel text space. Patch (2) has no affect on the size of kernel text space (it just adds a preprocessor flag). Patches (3) and (4) added about 600 bytes each of kernel text space, mostly in kernel/cpuset.c, which matters only if CONFIG_CPUSET is enabled. This patch: This patch applies a few comment and code cleanups to mm/oom_kill.c prior to applying a few small patches to improve cpuset management of memory placement. The comment changed in oom_kill.c was seriously misleading. The code layout change in select_bad_process() makes room for adding another condition on which a process can be spared the oom killer (see the subsequent cpuset_nodes_overlap patch for this addition). Also a couple typos and spellos that bugged me, while I was here. This patch should have no material affect. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
John Hawkes authored
I've already sent this to the maintainers, and this is now being sent to a larger community audience. I have fixed a problem with the ia64 version of build_sched_domains(), but a similar fix still needs to be made to the generic build_sched_domains() in kernel/sched.c. The "dynamic sched domains" functionality has recently been merged into 2.6.13-rcN that sees the dynamic declaration of a cpu-exclusive (a.k.a. "isolated") cpuset and rebuilds the CPU Scheduler sched domains and sched groups to separate away the CPUs in this cpu-exclusive cpuset from the remainder of the non-isolated CPUs. This allows the non-isolated CPUs to completely ignore the isolated CPUs when doing load-balancing. Unfortunately, build_sched_domains() expects that a sched domain will include all the CPUs of each node in the domain, i.e., that no node will belong in both an isolated cpuset and a non-isolated cpuset. Declaring a cpuset that violates this presumption will produce flawed data structures and will oops the kernel. To trigger the problem (on a NUMA system with >1 CPUs per node): cd /dev/cpuset mkdir newcpuset cd newcpuset echo 0 >cpus echo 0 >mems echo 1 >cpu_exclusive I have fixed this shortcoming for ia64 NUMA (with multiple CPUs per node). A similar shortcoming exists in the generic build_sched_domains() (in kernel/sched.c) for NUMA, and that needs to be fixed also. The fix involves dynamically allocating sched_group_nodes[] and sched_group_allnodes[] for each invocation of build_sched_domains(), rather than using global arrays for these structures. Care must be taken to remember kmalloc() addresses so that arch_destroy_sched_domains() can properly kfree() the new dynamic structures. Signed-off-by:
John Hawkes <hawkes@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Brian King authored
I ran across a memory leak related to the cfq scheduler. The cfq init function increments the refcnt of the associated request_queue. This refcount gets decremented in cfq's exit function. Since blk_cleanup_queue only calls the elevator exit function when its refcnt goes to zero, the request_q never gets cleaned up. It didn't look like other io schedulers were incrementing this refcnt, so I removed the refcnt increment and it fixed the memory leak for me. To reproduce the problem, simply use cfq and use the scsi_host scan sysfs attribute to scan "- - -" repeatedly on a scsi host and watch the memory vanish. Signed-off-by:
Brian King <brking@us.ibm.com> Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Max Kellermann authored
The sunrpc stats are collected in unsigned integers, but they are printed with '%d'. That can result in negative numbers in /proc/net/rpc when the highest bit of a counter is set. The following patch changes '%d' to '%u' where appropriate. Cc: "David S. Miller" <davem@davemloft.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
John McCutchan authored
People have run into a problem when they do this: watch (file1, all_events); watch (file2, some_events); if file2 is a hard link to file1, some events will be missed because by default we replace the mask. The patch below adds a flag IN_MASK_ADD which will cause inotify to add to the existing mask if present. Signed-off-by:
John McCutchan <ttb@tentacle.dhs.org> Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This makes sense now that we have asm-powerpc. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This patch gathers all the struct flock64 definitions (and the operations), puts them under !CONFIG_64BIT and cleans up the arch files. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This patch just gathers together all the struct flock definitions except xtensa into asm-generic/fcntl.h. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This patch puts the most popular of each fcntl operation/flag into asm-generic/fcntl.h and cleans up the arch files. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This patch puts the most popular of each open flag into asm-generic/fcntl.h and cleans up the arch files. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
These two files are basically identical, so make one just include the other (protecting the 32-bit-only parts with __powerpc64__). Also remove some completely unused defines. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
This set of patches creates asm-generic/fcntl.h and consolidates as much as possible from the asm-*/fcntl.h files into it. This patch just gathers all the identical bits of the asm-*/fcntl.h files into asm-generic/fcntl.h. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Philipp Matthias Hahn authored
While installing Debian on our new IBM X41 Tablet, I tried briefly to use the built-in Atmel TPM. The Athmel TPM is also located on the LPC-bus of the ICH6. To make it work I had to apply the following patch: Signed-off-by:
Philipp Matthias Hahn <pmhahn@titan.lahn.de> Acked-by:
Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
Here's a small warning fix for drivers/isdn/i4l/isdn_v110.c drivers/isdn/i4l/isdn_v110.c:523: warning: `ret' might be used uninitialized in this function In addition to Karsten Keil signing off on the patch, Thomas Pfeiffer also commented on the patch, saying "initializing ret with the value zero is correct and should be done." Please apply. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alex Williamson authored
The HPET driver is using a parts per second drift factor instead of the standard parts per million drift the time interpolator code expects. This patch fixes that problem and updates the URL for the HPET spec. Signed-off-by:
Alex Williamson <alex.williamson@hp.com> Cc: "Robert W. Picco" <bob.picco@hp.com> Acked-by:
"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Antonino A. Daplas authored
Based on a patch from Andr Pereira de Almeida <andre@cachola.com.br> It might be possible for the saved pointer (*p) to become invalid in between vc_resizes, so saving the screen offset instead of the screen pointer is saner. This bug is very hard to trigger though, but Andre probably did, if he's submitting this patch. Anyway, with Andre's patch, it's still possible for the offsets to be still illegal, if the new screen size is smaller than the old one. So I've also added checks if the offsets are still within the screenbuffer size. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ralf Baechle authored
I've rewriten Atushi's fix for the 64-bit put_unaligned on 32-bit systems bug to generate more efficient code. This case has buzilla URL http://bugzilla.kernel.org/show_bug.cgi?id=5138. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
The file `fs/umsdos/notes' contains only a small note about a possible bug involving verify_area(). Since umsdos is no longer in the kernel and verify_area() is also gone, it seems to make sense that this file goes the way of the Dodo. After applying this patch the `fs/umsdos/' directory will be empty and can be removed entirely. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
Remove (or edit) remaining references to the now dead verify_area() function from files in Documentation/. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
Remove the deprecated (and unused) verify_area() from various uaccess.h headers. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Pekka Enberg authored
Remove a redundant fifo_poll() abstraction from fs/pipe.c and adds a big fat comment stating we set POLLERR for FIFOs too on Linux unlike most Unices. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
asm/segment.h varies greatly on different architectures but is clearly deprecated. Removing all non-architecture consumers will make it easier for us to get ride of asm/segment.h all together. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stuart McLaren authored
Per-queue parameters should be updated using the appropriate blk_queue_xxx functions. Signed-off-by:
Stuart McLaren <stuart.mclaren@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
John Stultz authored
This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Mark variables which are usually accessed for reads with __readmostly. Signed-off-by:
Alok N Kataria <alokk@calsoftinc.com> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Pekka Enberg authored
This patch cleans up the error path of futex_fd() by removing duplicate code. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
Tested with 2.12i and 2.13-pre2. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Oleg Nesterov authored
posix_timer_event() first checks that the thread (SIGEV_THREAD_ID case) does not have PF_EXITING flag, then it calls send_sigqueue() which locks task list. But if the thread exits in between the kernel will oops (->sighand == NULL after __exit_sighand). This patch moves the PF_EXITING check into the send_sigqueue(), it must be done atomically under tasklist_lock. When send_sigqueue() detects exiting thread it returns -1. In that case posix_timer_event will send the signal to thread group. Also, this patch fixes task_struct use-after-free in posix_timer_event. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dave Johnson authored
Every time cramfs_lookup() is called to lookup and inode for a dentry, get_cramfs_inode() will allocate a new inode without checking to see if that inode already exists in the inode cache. This is fine the first time, but if the dentry cache entry(ies) associated with that inode are aged out, but the inode entry is not aged out (which can be quite common if the inode has buffer cache linked to it), cramfs_lookup() will be called again and another inode will be allocated and added to the inode cache creating a duplicate in the inode cache. The big issue here is that the buffers associated with each inode cache entry are not shared between the duplicates! The older inode entries are now orphaned as no dentry points to it and won't be freed until the buffer cache assoicated with them are first freed. The newest entry will have to create all new buffer cache for each part of its file as the old buffer cache is now orphaned as well. Patch below fixes this by making get_cramfs_inode() use the inode cache before blindly creating a new entry every time. This eliminates the duplicate inodes and duplicate buffer cache. Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
The second arg of do_timer_interrupt() is not used in the functions, and all callers pass NULL. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Paul Mundt <lethal@Linux-SH.ORG> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Eric Dumazet authored
struct file cleanup: f_maxcount has an unique value (INT_MAX). Just use the hard-wired value. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jesper Juhl authored
The patch removes a redundant variable `sig' from sys_prctl(). For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG then the value of arg2 is assigned to an int variable named sig. Then sig is tested with valid_signal() and later used to set the value of current->pdeath_signal . There is no reason to use this intermediate variable since valid_signal() takes a unsigned long argument, so it can handle being passed arg2 directly, and if the call to valid_signal is OK, then we know the value of arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int and thus there's no problem assigning it later to current->pdeath_signal (which is an int). The patch gets rid of the pointless variable `sig'. This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my system. Patch has been compile tested, boot tested, and just to make damn sure I didn't break anything I wrote a quick test app that calls prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a unsigned long, and it behaves as expected with and without the patch. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Tejun Heo authored
In update_atime(), timespec_equal() test is done twice in succession and the second is always false. This patch removes the second test. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Peter Staubach authored
There is a problem in the accounting subsystem in the kernel can not correctly handle files larger than 2GB. The output file containing the process accounting data can grow very large if the system is large enough and active enough. If the 2GB limit is reached, then the system simply stops storing process accounting data. Another annoying problem is that once the system reaches this 2GB limit, then every process which exits will receive a signal, SIGXFSZ. This signal is generated because an attempt was made to write beyond the limit for the file descriptor. This signal makes it look like every process has exited due to a signal, when in fact, they have not. The solution is to add the O_LARGEFILE flag to the list of flags used to open the accounting file. The rest of the accounting support is already largefile safe. The changes were tested by constructing a large file (just short of 2GB), enabling accounting, and then running enough commands to cause the accounting data generated to increase the size of the file to 2GB. Without the changes, the file grows to 2GB and the last command run in the test script appears to exit due a signal when it has not. With the changes, things work as expected and quietly. There are some user level changes required so that it can deal with largefiles, but those are being handled separately. Signed-off-by:
Peter Staubach <staubach@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-