The ifa lock is expected to be taken in BH context (by addrconf timers)
so we must disable BH when accessing it from user context.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the IDE fix for Jmicron went in one piece went walking somewhere
(send log shows my end somehow). Without this sometimes you get an oops
on boot.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

Patch from Dmitry Mishin <dim@openvz.org>:

Replace add_timer() by mod_timer() in dst_run_gc
in order to avoid BUG message.

       CPU1                            CPU2
dst_run_gc()  entered           dst_run_gc() entered
spin_lock(&dst_lock)                   .....
del_timer(&dst_gc_timer)         fail to get lock
       ....                         mod_timer() <--- puts 
                                                 timer back
                                                 to the list
add_timer(&dst_gc_timer) <--- BUG because timer is in list already.

Found during OpenVZ internal testing.

At first we thought that it is OpenVZ specific as we
added dst_run_gc(0) call in dst_dev_event(),
but as Alexey pointed to me it is possible to trigger
this condition in mainstream kernel.

F.e. timer has fired on CPU2, but the handler was preeempted
by an irq before dst_lock is tried.
Meanwhile, someone on CPU1 adds an entry to gc list and
starts the timer.
If CPU2 was preempted long enough, this timer can expire
simultaneously with resuming timer handler on CPU1, arriving
exactly to the situation described.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCSI EH locks door if sdev->locked is set.  Sometimes door lock
command fails continuously (e.g. when medium is not present) and as
libata uses EH to acquire sense data, this easily creates a loop where
a failed lock door invokes EH and EH issues lock door on completion.

This patch clears sdev->locked on door lock failure to break this
loop.  This problem has been spotted and diagnosed by Unicorn Chang
<uchang@tw.ibm.com>.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Fix a sata debug print statement that still uses an old variable name.

Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Dummy RDMA are always enabled on device startup since commit
9a71db72

 (to work around buggy
PCIe chipsets which do not implement resending properly). But,
we also need to always re-enable them when resuming the device.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Need to check some more cases in IPX receive.  If the skb is purely
fragments, the IPX header needs to be extracted. The function
pskb_may_pull() may in theory invalidate all the pointers in the skb,
so references to ipx header must be refreshed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ->set_mac_address handlers expect a pointer to a
sockaddr which contains the MAC address, whereas
IFLA_ADDRESS provides just the MAC address itself.

So whip up a sockaddr to wrap around the netlink
attribute for the ->set_mac_address call.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Yeasah Pell <yeasah@shwide.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

In bugzilla #6943, Maxim Britov reported:
"I can enable Logitech quickcam support in .config, but it want be compile.
I have to add into drivers/media/video/Makefile:
obj-$(CONFIG_USB_QUICKCAM_MESSENGER)    += usbvideo/"
He's right, just enable that driver as module while disabling every other
driver that gets into that directory, nothing will get compiled.
This patch fixes the Makefile.

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Without the LNA these tuners perform very poorly (read 'unwatchable') when
the signal is weak.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Due to a wrong statement order the 'standard' module option didn't
work for 'G' model chips.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

cx25840_read4 assembled the bytes in the wrong order.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

In pwc Kconfig, change 'depends' to 'depends on'
In dvb-core Makefile, change '=' to ':='

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Config option typo:
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

The compat_ioctl support of the pwc driver was dropped during the last update of the driver.
I suppose it was by mistake. If yes here is the patch to restore the support.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

TVMixer and FM801 Tea5757 are still using V4L1 API. 

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Compat32 should be able to handle V4L1 ioctls if the old API support were
selected.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Fix a subtle race condition between tg3_start_xmit() and tg3_tx()
discovered by Herbert Xu <herbert@gondor.apana.org.au>:

CPU0					CPU1
tg3_start_xmit()
	if (tx_ring_full) {
		tx_lock
					tg3_tx()
						if (!netif_queue_stopped)
		netif_stop_queue()
		if (!tx_ring_full)
						update_tx_ring 
			netif_wake_queue()
		tx_unlock
	}

Even though tx_ring is updated before the if statement in tg3_tx() in
program order, it can be re-ordered by the CPU as shown above.  This
scenario can cause the tx queue to be stopped forever if tg3_tx() has
just freed up the entire tx_ring.  The possibility of this happening
should be very rare though.

The following changes are made:

1. Add memory barrier to fix the above race condition.

2. Eliminate the private tx_lock altogether and rely solely on
netif_tx_lock.  This eliminates one spinlock in tg3_start_xmit()
when the ring is full.

3. Because of 2, use netif_tx_lock in tg3_tx() before calling
netif_wake_queue().

4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier.
Herbert and David suggested using the memory barrier instead of
volatile.

5. Check for the full wake queue condition before getting
netif_tx_lock in tg3_tx().  This reduces the number of unnecessary
spinlocks when the tx ring is full in a steady-state condition.

6. Update version to 3.65.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not count retransmitted segments.

Signed-off-by: Wei Yongjun <yjwei@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mirror the bug fix from fill_packet_ipv4()

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Chen-Li Tien <cltien@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Kirill Korotaev <dev@sw.ru>

During OpenVZ stress testing we found that UDP traffic with random src
can generate too much excessive rt hash growing leading finally to OOM
and kernel panics.

It was found that for 4GB i686 system (having 1048576 total pages and
  225280 normal zone pages) kernel allocates the following route hash:
syslog: IP route cache hash table entries: 262144 (order: 8, 1048576
bytes) => ip_rt_max_size = 4194304 entries, i.e.  max rt size is
4194304 * 256b = 1Gb of RAM > normal_zone

Attached the patch which removes HASH_HIGHMEM flag from
alloc_large_system_hash() call.

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch will linearize and check there is enough data.
It handles the pprop case as well as avoiding a whole audit of
the routing code.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All caller of netdev_alloc_skb need to assign skb->dev shortly
afterwards.  Move it into common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

external modules needs include/linux/autoconf.h and include/config/auto.conf
but skip the integrity test of these. Even with a newer Kconfig file we
shall just proceed since external modules simply uses the kernel source and
shall not attempt to modify it.
Error out if a config fiel is missing since they are mandatory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

When a file supplied via CONFIG_INITRAMFS pointed to a file
for which kbuild had a rule to compile it (foo.c => foo.o)
then kbuild would compile the file before adding the
file to the initramfs.

Teach make that files included in initramfs shall not be updated by adding
an 'empty command'. (See "Using Empty Commands" in info make).

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>