- Jan 15, 2009
-
-
Dhananjay Phadke authored
Some firmware commands like mac address addition/deletion are sent on the transmit ring. So need to hold the tx lock before touching tx producer/consumer indices. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
This fixes a tiny memory leak when driver is unloaded. The mac address list maintained in netxen_adapter needs to deleted when driver is going down. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
o Fix order or rom register writes. o Reduce udelays when writing rom registers. This cuts the firmware init time by 40%. o Do not reset core/memory clocks when reinitializing driver. Firmware willl handle this when initialized. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
o Read negotiated link speed when link state changes. o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and 10Gbps ports. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniele Venzano authored
The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by:
Daniele Venzano <venza@brownhat.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mike Ditto authored
If something goes wrong attaching to phy driver, we weren't freeing the IRQ. Signed-off-by:
Mike Ditto <mditto@consentry.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When we get a GSO packet from an untrusted source, we need to ensure that it is sufficiently long so that we don't end up crashing. Based on discovery and patch by Ian Campbell. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Reported by Jiri Klimes. Fix suggested by Patrick McHardy. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Bolle authored
Minor cleanups, either made possible or obvious after commit d700555b (I4l: convert to net_device_ops). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Bolle authored
When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a scary warning is logged: isdn_free_channel: called with invalid drv(-1) or channel(-1) This warning is caused by isdn_net_unbind_channel(), which always calls isdn_free_channel() even if isdn_net_local->isdn_device and isdn_net_local->isdn_channel are (still) in a perfectly acceptable default state, so let's not do that. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anton Vorontsov authored
Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383 Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 14, 2009
-
-
Herbert Xu authored
When a fib6 table dump is prematurely ended, we won't unlink its walker from the list. This causes all sorts of grief for other users of the list later. Reported-by:
Chris Caputo <ccaputo@alt.net> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willy Tarreau authored
As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not optimal. It processes at most one segment per call. This results in low performance and very high overhead due to syscall rate when splicing from interfaces which do not support LRO. Willy provided a patch inside tcp_splice_read(), but a better fix is to let tcp_read_sock() process as many segments as possible, so that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less often. With this change, splice() behaves like tcp_recvmsg(), being able to consume many skbs in one system call. With typical 1460 bytes of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return 16*1460 = 23360 bytes. Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 13, 2009
-
-
John W. Linville authored
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’: drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
drivers/net/wireless/b43/main.c: In function ‘b43_op_config’: drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’: net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Cyrill Gorcunov authored
The commits: 7a95d267 ("net: ppp_generic - use idr technique instead of cardmaps") ab5024ab ("net: ppp_generic - use DEFINE_IDR for static initialization") introduced usage of IDR functionality but broke userspace side. Before this commits it was possible to allocate new ppp interface with specified number. Now it fails with EINVAL. Fix it by trying to allocate interface with specified unit number and return EEXIST if fail which allow pppd to ask us to allocate new unit number. And fix messages on memory allocation fails - add details that it's PPP module who is complaining. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anton Vorontsov authored
This patch fixes following bug: BUG: soft lockup - CPU#0 stuck for 61s! [S03mountvirtfs-:922] Modules linked in: NIP: c006505c LR: c00675f0 CTR: c0020438 REGS: c7a1db90 TRAP: 0901 Not tainted (2.6.28-rc8-01311-g8c7396a) MSR: 00009032 <EE,ME,IR,DR> CR: 28248442 XER: 20000000 TASK = c7a288a0[922] 'S03mountvirtfs-' THREAD: c7a1c000 GPR00: 00009032 c7a1dc40 c7a288a0 00000024 c79a1840 00000000 00000300 00000020 GPR08: c035f97c 00000000 00004008 c04d5210 00000000 NIP [c006505c] handle_IRQ_event+0x34/0xb0 LR [c00675f0] handle_level_irq+0xa8/0x144 Call Trace: [c7a1dc40] [c00204d8] ipic_mask_irq+0xa0/0xb4 (unreliable) [c7a1dc60] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1dc80] [c00067f8] do_IRQ+0x78/0x108 [c7a1dc90] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at gfar_schedule_cleanup+0x54/0x7c LR = gfar_transmit+0x14/0x28 [c7a1dd50] [c0352a3c] _spin_unlock_irqrestore+0x18/0x30 (unreliable) [c7a1dd60] [c01f49a8] gfar_transmit+0x14/0x28 [c7a1dd70] [c0065084] handle_IRQ_event+0x5c/0xb0 [c7a1dd90] [c00675f0] handle_level_irq+0xa8/0x144 [c7a1ddb0] [c00067f8] do_IRQ+0x78/0x108 [c7a1ddc0] [c0014d7c] ret_from_except+0x0/0x14 --- Exception: 501 at up_read+0x10/0x48 LR = do_page_fault+0x2b0/0x3e0 [c7a1de80] [c7a177e8] 0xc7a177e8 (unreliable) [c7a1de90] [c0017964] do_page_fault+0x2b0/0x3e0 [c7a1df40] [c0014b14] handle_page_fault+0xc/0x80 --- Exception: 301 at 0xfe98b7c LR = 0xfe989c0 Instruction dump: 7c0802a6 bf810010 7c9f2378 7c7c1b78 90010024 80040004 70090020 40820010 7c0000a6 60008000 7c000124 3bc00000 <3ba00000> 48000010 83ff0014 2f9f0000 The bug introduced by commit 8c7396ae ("gianfar: Merge Tx and Rx interrupt for scheduling clean up ring"). The commit merged TX and RX interrupt code into a single routine that schedules NAPI, but no locks were introduced. This causes irq races, so when irqs are enabled and netif_rx_schedule_prep() returns 0, nobody disable the interrupts again. This leads to interrupt storm and finally to the lockup. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis Joseph Barrow authored
Filip Aben says this fix is neccessary for big endian machines. Signed-off-by:
Denis Joseph Barrow <D.Barow@option.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Currently htb_do_events() breaks events recounting for a level after 2 jiffies, but there is no reason to repeat this for next levels and increase delays even more (with softirqs disabled). htb_dequeue_tree() can add to this too, btw. In such a case q->now time is invalid anyway. Thanks to Patrick McHardy for spotting an error around earlier version of this patch. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Next event time should consider jiffies used for recounting. Otherwise qdisc_watchdog_schedule() triggers hrtimer immediately with the event in the past, and may cause very high ksoftirqd cpu usage (if highres is on). There is also removed checking "event" for zero in htb_dequeue(): it's always true in this place. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Kennedy authored
reorder struct xt_match to remove 8 bytes of padding and make its size 128 bytes. This saves a small amount of data space in each of the xt netfilter modules and fits xt_match in one 128 byte cache line. Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
netfilter: xt_time: print timezone for user information Let users have a way to figure out if their distro set the kernel timezone at all. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
nf_conntrack_alloc cannot return NULL, so there is no need to check for NULL before using the value. I have also removed the initialization of ct to NULL in nf_conntrack_alloc, since the value is never used, and since perhaps it might lead one to think that return ct at the end might return NULL. The semantic patch that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; position p1,p2; statement S1, S2; @@ x@p1 = nf_conntrack_alloc(...) ... when != x = E ( if (x@p2 == NULL || ...) S1 else S2 | if (x@p2 == NULL && ...) S1 else S2 ) @other_match exists@ expression match.x, E1, E2; position p1!=match.p1,match.p2; @@ x@p1 = E1 ... when != x = E2 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "%s: call to nf_conntrack_alloc %s bad test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
An old bug crept back into the ICMP/ICMPv6 conntrack protocols: the timeout values are defined as unsigned longs, the sysctl's maxsize is set to sizeof(unsigned int). Use unsigned int for the timeout values as in the other conntrack protocols. Reported-by:
Jean-Mickael Guerin <jean-mickael.guerin@6wind.com> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
Commit 8cc784ee (netfilter: change return types of match functions for ebtables extensions) broke ebtables matches by inverting the sense of match/nomatch. Reported-by:
Matt Cross <matthltc@us.ibm.com> Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Commit 55b69e91 (netfilter: implement NFPROTO_UNSPEC as a wildcard for extensions) broke revision probing for matches and targets that are registered with NFPROTO_UNSPEC. Fix by continuing the search on the NFPROTO_UNSPEC list if nothing is found on the af-specific lists. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The PPPOE/VLAN processing code in the bridge netfilter is broken by design. The VLAN tag and the PPPOE session ID are an integral part of the packet flow information, yet they're completely ignored by the bridge netfilter. This is potentially a security hole as it treats all VLANs and PPPOE sessions as the same. What's more, it's actually broken for PPPOE as the bridge netfilter tries to trim the packets to the IP length without adjusting the PPPOE header (and adjusting the PPPOE header isn't much better since the PPPOE peer may require the padding to be present). Therefore we should disable this by default. It does mean that people relying on this feature may lose networking depending on how their bridge netfilter rules are configured. However, IMHO the problems this code causes are serious enough to warrant this. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Currently the bridge FORWARD/POST_ROUTING chains treats all non-IPv4 packets as IPv6. This packet fixes that by returning NF_ACCEPT on non-IP packets instead, just as is done in PRE_ROUTING. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Don't spam logs for locally generated short packets. these can only be generated by root. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krzysztof Hałasa authored
Fix a comment in include/linux/netdevice.h. Signed-off-by:
Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krzysztof Hałasa authored
Signed-off-by:
Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-