bpf: fix out of bounds backwards jmps due to dead code removal

systemtap folks reported the following splat recently:

  [ 7790.862212] WARNING: CPU: 3 PID: 26759 at arch/x86/kernel/kprobes/core.c:1022 kprobe_fault_handler+0xec/0xf0
  [...]
  [ 7790.864113] CPU: 3 PID: 26759 Comm: sshd Not tainted 5.1.0-0.rc7.git1.1.fc31.x86_64 #1
  [ 7790.864198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS[...]
  [ 7790.864314] RIP: 0010:kprobe_fault_handler+0xec/0xf0
  [ 7790.864375] Code: 48 8b 50 [...]
  [ 7790.864714] RSP: 0018:ffffc06800bdbb48 EFLAGS: 00010082
  [ 7790.864812] RAX: ffff9e2b75a16320 RBX: 0000000000000000 RCX: 0000000000000000
  [ 7790.865306] RDX: ffffffffffffffff RSI: 000000000000000e RDI: ffffc06800bdbbf8
  [ 7790.865514] RBP: ffffc06800bdbbf8 R08: 0000000000000000 R09: 0000000000000000
  [ 7790.865960] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc06800bdbbf8
  [ 7790.866037] R13: ffff9e2ab56a0418 R14: ffff9e2b6d0bb400 R15: ffff9e2b6d268000
  [ 7790.866114] FS:  00007fde49937d80(0000) GS:ffff9e2b75a00000(0000) knlGS:0000000000000000
  [ 7790.866193] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 7790.866318] CR2: 0000000000000000 CR3: 000000012f312000 CR4: 00000000000006e0
  [ 7790.866419] Call Trace:
  [ 7790.866677]  do_user_addr_fault+0x64/0x480
  [ 7790.867513]  do_page_fault+0x33/0x210
  [ 7790.868002]  async_page_fault+0x1e/0x30
  [ 7790.868071] RIP: 0010:          (null)
  [ 7790.868144] Code: Bad RIP value.
  [ 7790.868229] RSP: 0018:ffffc06800bdbca8 EFLAGS: 00010282
  [ 7790.868362] RAX: ffff9e2b598b60f8 RBX: ffffc06800bdbe48 RCX: 0000000000000004
  [ 7790.868629] RDX: 0000000000000004 RSI: ffffc06800bdbc6c RDI: ffff9e2b598b60f0
  [ 7790.868834] RBP: ffffc06800bdbcf8 R08: 0000000000000000 R09: 0000000000000004
  [ 7790.870432] R10: 00000000ff6f7a03 R11: 0000000000000000 R12: 0000000000000001
  [ 7790.871859] R13: ffffc06800bdbcb8 R14: 0000000000000000 R15: ffff9e2acd0a5310
  [ 7790.873455]  ? vfs_read+0x5/0x170
  [ 7790.874639]  ? vfs_read+0x1/0x170
  [ 7790.875834]  ? trace_call_bpf+0xf6/0x260
  [ 7790.877044]  ? vfs_read+0x1/0x170
  [ 7790.878208]  ? vfs_read+0x5/0x170
  [ 7790.879345]  ? kprobe_perf_func+0x233/0x260
  [ 7790.880503]  ? vfs_read+0x1/0x170
  [ 7790.881632]  ? vfs_read+0x5/0x170
  [ 7790.882751]  ? kprobe_ftrace_handler+0x92/0xf0
  [ 7790.883926]  ? __vfs_read+0x30/0x30
  [ 7790.885050]  ? ftrace_ops_assist_func+0x94/0x100
  [ 7790.886183]  ? vfs_read+0x1/0x170
  [ 7790.887283]  ? vfs_read+0x5/0x170
  [ 7790.888348]  ? ksys_read+0x5a/0xe0
  [ 7790.889389]  ? do_syscall_64+0x5c/0xa0
  [ 7790.890401]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some debugging, turns out that the logic in 2cbd95a5
("bpf: change parameters of call/branch offset adjustment") has
a bug that is exposed after 52875a04 ("bpf: verifier: remove
dead code") in that we miss some of the jump offset adjustments
after code patching when we remove dead code, more concretely,
upon backward jump spanning over the area that is being removed.

BPF insns of a case that was hit pre 52875a04:

  [...]
  676: (85) call bpf_perf_event_output#-47616
  677: (05) goto pc-636
  678: (62) *(u32 *)(r10 -64) = 0
  679: (bf) r7 = r10
  680: (07) r7 += -64
  681: (05) goto pc-44
  682: (05) goto pc-1
  683: (05) goto pc-1

BPF insns afterwards:

  [...]
  618: (85) call bpf_perf_event_output#-47616
  619: (05) goto pc-638
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

To illustrate the bug, situation looks as follows:
     ____
  0 |    | <-- foo: [...]
  1 |____|
  2 |____| <-- pos / end_new  ^
  3 |    |                    |
  4 |    |                    |  len
  5 |____|                    |  (remove region)
  6 |    | <-- end_old        v
  7 |    |
  8 |    | <-- curr  (jmp foo)
  9 |____|

The condition curr >= end_new && curr + off + 1 < end_new in the
branch delta adjustments is never hit because curr + off + 1 <
end_new is compared as unsigned and therefore curr + off + 1 >
end_new in unsigned realm as curr + off + 1 becomes negative
since the insns are memmove()'d before the offset adjustments.

Correct BPF insns after this fix:

  [...]
  618: (85) call bpf_perf_event_output#-47216
  619: (05) goto pc-578
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

Note that unprivileged case is not affected from this.

Fixes: 52875a04 ("bpf: verifier: remove dead code")
Fixes: 2cbd95a5 ("bpf: change parameters of call/branch offset adjustment")
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>