Commit 8bb9a2b2 authored by BALATON Zoltan's avatar BALATON Zoltan Committed by Gerd Hoffmann
Browse files

ati-vga: Add limited support for big endian frame buffer aperture 



Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.

Signed-off-by: default avatarBALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: default avatarGerd Hoffmann <kraxel@redhat.com>
parent c026350a

hw/display/ati.c

+9 −1
Original line number Diff line number Diff line
@@ -90,7 +90,9 @@ static void ati_vga_switch_mode(ATIVGAState *s) 
            DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs);

            vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);

            vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED);

            s->vga.big_endian_fb = false;

            s->vga.big_endian_fb = (s->regs.config_cntl & APER_0_ENDIAN ||

                                    s->regs.config_cntl & APER_1_ENDIAN ?

                                    true : false);

            /* reset VBE regs then set up mode */

            s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h;

            s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v;
@@ -310,6 +312,9 @@ static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size) 
    case PALETTE_DATA:

        val = vga_ioport_read(&s->vga, VGA_PEL_D);

        break;

    case CNFG_CNTL:

        val = s->regs.config_cntl;

        break;

    case CNFG_MEMSIZE:

        val = s->vga.vram_size;

        break;
@@ -604,6 +609,9 @@ static void ati_mm_write(void *opaque, hwaddr addr, 
        data >>= 8;

        vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff);

        break;

    case CNFG_CNTL:

        s->regs.config_cntl = data;

        break;

    case CRTC_H_TOTAL_DISP:

        s->regs.crtc_h_total_disp = data & 0x07ff07ff;

        break;

hw/display/ati_int.h

+1 −0
Original line number Diff line number Diff line
@@ -39,6 +39,7 @@ typedef struct ATIVGARegs { 
    uint32_t gpio_vga_ddc;

    uint32_t gpio_dvi_ddc;

    uint32_t gpio_monid;

    uint32_t config_cntl;

    uint32_t crtc_h_total_disp;

    uint32_t crtc_h_sync_strt_wid;

    uint32_t crtc_v_total_disp;

hw/display/ati_regs.h

+2 −0
Original line number Diff line number Diff line
@@ -317,6 +317,8 @@ 
#define X_MPLL_REF_DIV_MASK                     0x000000FF



/* Config control values (CONFIG_CNTL) */

#define APER_0_ENDIAN                           0x00000003

#define APER_1_ENDIAN                           0x0000000c

#define CFG_VGA_IO_DIS                          0x00000400



/* CRTC control values (CRTC_GEN_CNTL) */