If qrtr_endpoint_register() failed, tun is leaked.
Fix this, by freeing tun in error path.

syzbot report:
BUG: memory leak
unreferenced object 0xffff88811848d680 (size 64):
  comm "syz-executor684", pid 10171, jiffies 4294951561 (age 26.070s)
  hex dump (first 32 bytes):
    80 dd 0a 84 ff ff ff ff 00 00 00 00 00 00 00 00  ................
    90 d6 48 18 81 88 ff ff 90 d6 48 18 81 88 ff ff  ..H.......H.....
  backtrace:
    [<0000000018992a50>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000018992a50>] kzalloc include/linux/slab.h:682 [inline]
    [<0000000018992a50>] qrtr_tun_open+0x22/0x90 net/qrtr/tun.c:35
    [<0000000003a453ef>] misc_open+0x19c/0x1e0 drivers/char/misc.c:141
    [<00000000dec38ac8>] chrdev_open+0x10d/0x340 fs/char_dev.c:414
    [<0000000079094996>] do_dentry_open+0x1e6/0x620 fs/open.c:817
    [<000000004096d290>] do_open fs/namei.c:3252 [inline]
    [<000000004096d290>] path_openat+0x74a/0x1b00 fs/namei.c:3369
    [<00000000b8e64241>] do_filp_open+0xa0/0x190 fs/namei.c:3396
    [<00000000a3299422>] do_sys_openat2+0xed/0x230 fs/open.c:1172
    [<000000002c1bdcef>] do_sys_open fs/open.c:1188 [inline]
    [<000000002c1bdcef>] __do_sys_openat fs/open.c:1204 [inline]
    [<000000002c1bdcef>] __se_sys_openat fs/open.c:1199 [inline]
    [<000000002c1bdcef>] __x64_sys_openat+0x7f/0xe0 fs/open.c:1199
    [<00000000f3a5728f>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<000000004b38b7ec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 28fb4e59 ("net: qrtr: Expose tunneling endpoint to user space")
Reported-by:  <syzbot+5d6e4af21385f5cfc56a@syzkaller.appspotmail.com>
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Link: https://lore.kernel.org/r/20210221234427.GA2140@DESKTOP


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The debug check must be done after unregister_netdevice_many() call --
the hlist_del_rcu() for this is done inside .ndo_stop.

This is the same with commit 0fda7600 ("geneve: move debug check after
netdev unregister")

Test commands:
    ip netns del A
    ip netns add A
    ip netns add B

    ip netns exec B ip link add vxlan0 type vxlan vni 100 local 10.0.0.1 \
	    remote 10.0.0.2 dstport 4789 srcport 4789 4789
    ip netns exec B ip link set vxlan0 netns A
    ip netns exec A ip link set vxlan0 up
    ip netns del B

Splat looks like:
[   73.176249][    T7] ------------[ cut here ]------------
[   73.178662][    T7] WARNING: CPU: 4 PID: 7 at drivers/net/vxlan.c:4743 vxlan_exit_batch_net+0x52e/0x720 [vxlan]
[   73.182597][    T7] Modules linked in: vxlan openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_core nfp mlxfw ixgbevf tls sch_fq_codel nf_tables nfnetlink ip_tables x_tables unix
[   73.190113][    T7] CPU: 4 PID: 7 Comm: kworker/u16:0 Not tainted 5.11.0-rc7+ #838
[   73.193037][    T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   73.196986][    T7] Workqueue: netns cleanup_net
[   73.198946][    T7] RIP: 0010:vxlan_exit_batch_net+0x52e/0x720 [vxlan]
[   73.201509][    T7] Code: 00 01 00 00 0f 84 39 fd ff ff 48 89 ca 48 c1 ea 03 80 3c 1a 00 0f 85 a6 00 00 00 89 c2 48 83 c2 02 49 8b 14 d4 48 85 d2 74 ce <0f> 0b eb ca e8 b9 51 db dd 84 c0 0f 85 4a fe ff ff 48 c7 c2 80 bc
[   73.208813][    T7] RSP: 0018:ffff888100907c10 EFLAGS: 00010286
[   73.211027][    T7] RAX: 000000000000003c RBX: dffffc0000000000 RCX: ffff88800ec411f0
[   73.213702][    T7] RDX: ffff88800a278000 RSI: ffff88800fc78c70 RDI: ffff88800fc78070
[   73.216169][    T7] RBP: ffff88800b5cbdc0 R08: fffffbfff424de61 R09: fffffbfff424de61
[   73.218463][    T7] R10: ffffffffa126f307 R11: fffffbfff424de60 R12: ffff88800ec41000
[   73.220794][    T7] R13: ffff888100907d08 R14: ffff888100907c50 R15: ffff88800fc78c40
[   73.223337][    T7] FS:  0000000000000000(0000) GS:ffff888114800000(0000) knlGS:0000000000000000
[   73.225814][    T7] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   73.227616][    T7] CR2: 0000562b5cb4f4d0 CR3: 0000000105fbe001 CR4: 00000000003706e0
[   73.229700][    T7] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   73.231820][    T7] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   73.233844][    T7] Call Trace:
[   73.234698][    T7]  ? vxlan_err_lookup+0x3c0/0x3c0 [vxlan]
[   73.235962][    T7]  ? ops_exit_list.isra.11+0x93/0x140
[   73.237134][    T7]  cleanup_net+0x45e/0x8a0
[ ... ]

Fixes: 57b61127 ("vxlan: speedup vxlan tunnels dismantle")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20210221154552.11749-1-ap420073@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Hayes Wang says:

====================
r8152: minor adjustments

These patches are used to adjust the code.
====================

Link: https://lore.kernel.org/r/1394712342-15778-341-Taiwan-albertk@realtek.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add rtl_eee_plus_en() and rtl_green_en().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some messages are before calling register_netdev(), so replace
netif_err() with dev_err().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Return error code if autosuspend_en, eee_get, or eee_set don't exist.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

U1/U2 shoued be enabled for USB 3.0 or later. The USB 2.0 doesn't
support it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add invalid and reply flags validate in the fl_validate_ct_state.
This makes the checking complete if compared to ovs'
validate_ct_state().

Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/1614064315-364-1-git-send-email-wenxu@ucloud.cn


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Fainelli says:

====================
net: dsa: Learning fixes for b53/bcm_sf2

This patch series contains a couple of fixes for the b53/bcm_sf2 drivers
with respect to configuring learning.

The first patch is wiring-up the necessary dsa_switch_ops operations in
order to support the offloading of bridge flags.

The second patch corrects the switch driver's default learning behavior
which was unfortunately wrong from day one.

This is submitted against "net" because this is technically a bug fix
since ports should not have had learning enabled by default but given
this is dependent upon Vladimir's recent br_flags series, there is no
Fixes tag provided.

I will be providing targeted stable backports that look a bit
different.

Changes in v2:

- added first patch
- updated second patch to include BR_LEARNING check in br_flags_pre as
  a support bridge flag to offload
====================

Link: https://lore.kernel.org/r/20210222223010.2907234-1-f.fainelli@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for being able to set the learning attribute on port, and
make sure that the standalone ports start up with learning disabled.

We can remove the code in bcm_sf2 that configured the ports learning
attribute because we want the standalone ports to have learning disabled
by default and port 7 cannot be bridged, so its learning attribute will
not change past its initial configuration.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Because bcm_sf2 implements its own dsa_switch_ops we need to export the
b53_br_flags_pre(), b53_br_flags() and b53_set_mrouter so we can wire-up
them up like they used to be with the former b53_br_egress_floods().

Fixes: a8b659e7 ("net: dsa: act as passthrough for bridge port flags")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sky2.c driver uses netdev_warn() before the net device is initialized.
Fix it by using dev_warn() instead.

Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>

Link: https://lore.kernel.org/r/m3a6s1r1ul.fsf@t19.piap.pl


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In ndo_stop functions, netdev_completed_queue() is called during forced
tx reclaim, after netdev_reset_queue(). This may trigger kernel panic if
there is any tx skb left.

This patch moves netdev_reset_queue() to after tx reclaim, so BQL can
complete successfully then reset.

Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Fixes: 4c59b0f5 ("bcm63xx_enet: add BQL support")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210222013530.1356-1-liew.s.piaw@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:

    panic+0x108/0x2ea
    __stack_chk_fail+0x14/0x20
    __icmp_send+0x5bd/0x5c0
    icmp_ndo_send+0x148/0x160

In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:

    // sptr/skb are attacker-controlled skb bytes
    sptr = skb_network_header(skb);
    // dptr/dopt points to stack memory allocated by __icmp_send
    dptr = dopt->__data;
    // sopt is the corrupt skb->cb in question
    if (sopt->rr) {
        optlen  = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
        soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
	// this now writes potentially attacker-controlled data, over
	// flowing the stack:
        memcpy(dptr, sptr+sopt->rr, optlen);
    }

In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.

This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:

    BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
    Write of size 38 at addr ffff888006f1f80e by task ping/89
    CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
    Call Trace:
     dump_stack+0x9a/0xcc
     print_address_description.constprop.0+0x1a/0x160
     __kasan_report.cold+0x20/0x38
     kasan_report+0x32/0x40
     check_memory_region+0x145/0x1a0
     memcpy+0x39/0x60
     __ip_options_echo+0xa0e/0x12b0
     __icmp_send+0x744/0x1700

Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.

This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.

Fixes: a2b78e9b ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs")
Reported-by: SinYu <liuxyon@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/


Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-02-19

This series contains updates to i40e driver only.

Slawomir resolves an issue with the IPv6 extension headers being
processed incorrectly.

Keita Suzuki fixes a memory leak on probe failure.

Mateusz initializes AQ command structures to zero to comply with
spec, fixes FW flow control settings being overwritten and resolves an
issue with adding VLAN filters after enabling FW LLDP. He also adds
an additional check when adding TC filter as the current check doesn't
properly distinguish between IPv4 and IPv6.

Sylwester removes setting disabled bit when syncing filters as this
prevents VFs from completing setup.

Norbert cleans up sparse warnings.

v2:
- Fix fixes tag on patch 7

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix endianness conversions
  i40e: Fix add TC filter for IPv6
  i40e: Fix VFs not created
  i40e: Fix addition of RX filters after enabling FW LLDP agent
  i40e: Fix overwriting flow control settings during driver loading
  i40e: Add zero-initialization of AQ command structures
  i40e: Fix memory leak in i40e_probe
  i40e: Fix flow for IPv6 next header (extension header)
====================

Link: https://lore.kernel.org/r/20210219213606.2567536-1-anthony.l.nguyen@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx4_do_mirror_rule() forgets to call mlx4_free_cmd_mailbox() to
free the memory region allocated by mlx4_alloc_cmd_mailbox() before
an exit.
Add the missed call to fix it.

Fixes: 78efed27 ("net/mlx4_core: Support mirroring VF DMFS rules on both ports")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210221143559.390277-1-hslester96@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When link speed is not 100 Mbps, port transmit rate and speed divider
are set to 8 and 1000000 respectively. These values are incorrect for
CBS idleslope and sendslope HW values calculation if the link speed is
not 1 Gbps.

This patch adds switch statement to set the values of port transmit rate
and speed divider for 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps, and 100 Mbps.
Note that CBS is not supported at 10 Mbps.

Fixes: bc41a668 ("net: stmmac: tc: Remove the speed dependency")
Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC")
Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/r/1613655653-11755-1-git-send-email-yoong.siang.song@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Paolo Abeni says:

====================
mptcp: a bunch of fixes

This series bundle a few MPTCP fixes for the current net tree.
They have been detected via syzkaller and packetdrill

Patch 1 fixes a slow close for orphaned sockets

Patch 2 fixes another hangup at close time, when no
data was actually transmitted before close

Patch 3 fixes a memory leak with unusual sockopts

Patch 4 fixes stray wake-ups on listener sockets
====================

Link: https://lore.kernel.org/r/cover.1613755058.git.pabeni@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MPJ subflows are not exposed as fds to user spaces. As such,
incoming MPJ subflows are removed from the accept queue by
tcp_check_req()/tcp_get_cookie_sock().

Later tcp_child_process() invokes subflow_data_ready() on the
parent socket regardless of the subflow kind, leading to poll
wakeups even if the later accept will block.

Address the issue by double-checking the queue state before
waking the user-space.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/164


Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp re-used inet(6)_release, so the subflow sockets are ignored.
Need to invoke ip(v6)_mc_drop_socket function to ensure mcast join
resources get free'd.

Fixes: 717e79c8 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/110


Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the msk is closed before sending or receiving any data,
no DATA_FIN is generated, instead an MPC ack packet is
crafted out.

In the above scenario, the MPTCP protocol creates and sends a
pure ack and such packets matches also the criteria for an
MPC ack and the protocol tries first to insert MPC options,
leading to the described error.

This change addresses the issue by avoiding the insertion of an
MPC option for DATA_FIN packets or if the sub-flow is not
established.

To avoid doing multiple times the same test, fetch the data_fin
flag in a bool variable and pass it to both the interested
helpers.

Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently we move orphaned msk sockets directly from FIN_WAIT2
state to CLOSE, with the rationale that incoming additional
data could be just dropped by the TCP stack/TW sockets.

Anyhow we miss sending MPTCP-level ack on incoming DATA_FIN,
and that may hang the peers.

Fixes: e16163b6 ("mptcp: refactor shutdown and close")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The core DSA framework uses hsr_is_master() which would not resolve to a
valid symbol if HSR is built-into the kernel and DSA is a module.

Fixes: 18596f50 ("net: dsa: add support for offloading HSR")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210220051222.15672-1-f.fainelli@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The comments to phy_select_page() say that "phy_restore_page() must
always be called after this, irrespective of success or failure of this
call."  If we don't call phy_restore_page() then we are still holding
the phy_lock_mdio_bus() so it eventually leads to a dead lock.

Fixes: 32ab60e5 ("net: phy: icplus: add MDI/MDIX support for IP101A/G")
Fixes: f9bc51e6 ("net: phy: icplus: fix paged register access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/YC+OpFGsDPXPnXM5@mwanda


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

PPv2 loopback port doesn't support RSS, so we should
skip RSS configurations for this port.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1613652123-19021-1-git-send-email-stefanc@marvell.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The current use of container_of is flawed and unnecessary. Obtain
the dpaa_napi_portal reference from the private percpu data instead.

Fixes: a1e031ff ("dpaa_eth: add XDP_REDIRECT support")
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20210218182106.22613-1-camelia.groza@nxp.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 bytes of the MTU are reserved for Atheros DSA tag, but DSA core
has already handled that since commit dc0fe7d4.
Remove the unnecessary reservation.

Fixes: d51b6ce4 ("net: ethernet: add ag71xx driver")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210218034514.3421-1-dqfext@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This code does not allocate enough memory for the NUL terminator so it
ends up putting it one character beyond the end of the buffer.

Fixes: 8756828a ("octeontx2-af: Add NPA aura and pool contexts to debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull performance event updates from Ingo Molnar:

 - Add CPU-PMU support for Intel Sapphire Rapids CPUs

 - Extend the perf ABI with PERF_SAMPLE_WEIGHT_STRUCT, to offer
   two-parameter sampling event feedback. Not used yet, but is intended
   for Golden Cove CPU-PMU, which can provide both the instruction
   latency and the cache latency information for memory profiling
   events.

 - Remove experimental, default-disabled perfmon-v4 counter_freezing
   support that could only be enabled via a boot option. The hardware is
   hopelessly broken, we'd like to make sure nobody starts relying on
   this, as it would only end in tears.

 - Fix energy/power events on Intel SPR platforms

 - Simplify the uprobes resume_execution() logic

 - Misc smaller fixes.

* tag 'perf-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Fix psys-energy event on Intel SPR platform
  perf/x86/rapl: Only check lower 32bits for RAPL energy counters
  perf/x86/rapl: Add msr mask support
  perf/x86/kvm: Add Cascade Lake Xeon steppings to isolation_ucodes[]
  perf/x86/intel: Support CPUID 10.ECX to disable fixed counters
  perf/x86/intel: Add perf core PMU support for Sapphire Rapids
  perf/x86/intel: Filter unsupported Topdown metrics event
  perf/x86/intel: Factor out intel_update_topdown_event()
  perf/core: Add PERF_SAMPLE_WEIGHT_STRUCT
  perf/intel: Remove Perfmon-v4 counter_freezing support
  x86/perf: Use static_call for x86_pmu.guest_get_msrs
  perf/x86/intel/uncore: With > 8 nodes, get pci bus die id from NUMA info
  perf/x86/intel/uncore: Store the logical die id instead of the physical die id.
  x86/kprobes: Do not decode opcode in resume_execution()

Pull scheduler updates from Ingo Molnar:
 "Core scheduler updates:

   - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
     preempt=none/voluntary/full boot options (default: full), to allow
     distros to build a PREEMPT kernel but fall back to close to
     PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
     a boot time selection.

     There's also the /debug/sched_debug switch to do this runtime.

     This feature is implemented via runtime patching (a new variant of
     static calls).

     The scope of the runtime patching can be best reviewed by looking
     at the sched_dynamic_update() function in kernel/sched/core.c.

     ( Note that the dynamic none/voluntary mode isn't 100% identical,
       for example preempt-RCU is available in all cases, plus the
       preempt count is maintained in all models, which has runtime
       overhead even with the code patching. )

     The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
     majority of distributions, are supposed to be unaffected.

   - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
     was found via rcutorture triggering a hang. The bug is that
     rcu_idle_enter() may wake up a NOCB kthread, but this happens after
     the last generic need_resched() check. Some cpuidle drivers fix it
     by chance but many others don't.

     In true 2020 fashion the original bug fix has grown into a 5-patch
     scheduler/RCU fix series plus another 16 RCU patches to address the
     underlying issue of missed preemption events. These are the initial
     fixes that should fix current incarnations of the bug.

   - Clean up rbtree usage in the scheduler, by providing & using the
     following consistent set of rbtree APIs:

       partial-order; less() based:
         - rb_add(): add a new entry to the rbtree
         - rb_add_cached(): like rb_add(), but for a rb_root_cached

       total-order; cmp() based:
         - rb_find(): find an entry in an rbtree
         - rb_find_add(): find an entry, and add if not found

         - rb_find_first(): find the first (leftmost) matching entry
         - rb_next_match(): continue from rb_find_first()
         - rb_for_each(): iterate a sub-tree using the previous two

   - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
     single pass. This is a 4-commit series where each commit improves
     one aspect of the idle sibling scan logic.

   - Improve the cpufreq cooling driver by getting the effective CPU
     utilization metrics from the scheduler

   - Improve the fair scheduler's active load-balancing logic by
     reducing the number of active LB attempts & lengthen the
     load-balancing interval. This improves stress-ng mmapfork
     performance.

   - Fix CFS's estimated utilization (util_est) calculation bug that can
     result in too high utilization values

  Misc updates & fixes:

   - Fix the HRTICK reprogramming & optimization feature

   - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code

   - Reduce dl_add_task_root_domain() overhead

   - Fix uprobes refcount bug

   - Process pending softirqs in flush_smp_call_function_from_idle()

   - Clean up task priority related defines, remove *USER_*PRIO and
     USER_PRIO()

   - Simplify the sched_init_numa() deduplication sort

   - Documentation updates

   - Fix EAS bug in update_misfit_status(), which degraded the quality
     of energy-balancing

   - Smaller cleanups"

* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  sched,x86: Allow !PREEMPT_DYNAMIC
  entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
  entry: Explicitly flush pending rcuog wakeup before last rescheduling point
  rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
  rcu/nocb: Perform deferred wake up before last idle's need_resched() check
  rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
  sched/features: Distinguish between NORMAL and DEADLINE hrtick
  sched/features: Fix hrtick reprogramming
  sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
  uprobes: (Re)add missing get_uprobe() in __find_uprobe()
  smp: Process pending softirqs in flush_smp_call_function_from_idle()
  sched: Harden PREEMPT_DYNAMIC
  static_call: Allow module use without exposing static_call_key
  sched: Add /debug/sched_preempt
  preempt/dynamic: Support dynamic preempt with preempt= boot option
  preempt/dynamic: Provide irqentry_exit_cond_resched() static call
  preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
  preempt/dynamic: Provide cond_resched() and might_resched() static calls
  preempt: Introduce CONFIG_PREEMPT_DYNAMIC
  static_call: Provide DEFINE_STATIC_CALL_RET0()
  ...

Pull tlb gather updates from Ingo Molnar:
 "Theses fix MM (soft-)dirty bit management in the procfs code & clean
  up the TLB gather API"

* tag 'core-mm-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ldt: Use tlb_gather_mmu_fullmm() when freeing LDT page-tables
  tlb: arch: Remove empty __tlb_remove_tlb_entry() stubs
  tlb: mmu_gather: Remove start/end arguments from tlb_gather_mmu()
  tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm()
  tlb: mmu_gather: Remove unused start/end arguments from tlb_finish_mmu()
  mm: proc: Invalidate TLB after clearing soft-dirty page state

Pull locking updates from Ingo Molnar:
 "Core locking primitives updates:
    - Remove mutex_trylock_recursive() from the API - no users left
    - Simplify + constify the futex code a bit

  Lockdep updates:
    - Teach lockdep about local_lock_t
    - Add CONFIG_DEBUG_IRQFLAGS=y debug config option to check for
      potentially unsafe IRQ mask restoration patterns. (I.e.
      calling raw_local_irq_restore() with IRQs enabled.)
    - Add wait context self-tests
    - Fix graph lock corner case corrupting internal data structures
    - Fix noinstr annotations

  LKMM updates:
    - Simplify the litmus tests
    - Documentation fixes

  KCSAN updates:
    - Re-enable KCSAN instrumentation in lib/random32.c

  Misc fixes:
    - Don't branch-trace static label APIs
    - DocBook fix
    - Remove stale leftover empty file"

* tag 'locking-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  checkpatch: Don't check for mutex_trylock_recursive()
  locking/mutex: Kill mutex_trylock_recursive()
  s390: Use arch_local_irq_{save,restore}() in early boot code
  lockdep: Noinstr annotate warn_bogus_irq_restore()
  locking/lockdep: Avoid unmatched unlock
  locking/rwsem: Remove empty rwsem.h
  locking/rtmutex: Add missing kernel-doc markup
  futex: Remove unneeded gotos
  futex: Change utime parameter to be 'const ... *'
  lockdep: report broken irq restoration
  jump_label: Do not profile branch annotations
  locking: Add Reviewers
  locking/selftests: Add local_lock inversion tests
  locking/lockdep: Exclude local_lock_t from IRQ inversions
  locking/lockdep: Clean up check_redundant() a bit
  locking/lockdep: Add a skip() function to __bfs()
  locking/lockdep: Mark local_lock_t
  locking/selftests: More granular debug_locks_verbose
  lockdep/selftest: Add wait context selftests
  tools/memory-model: Fix typo in klitmus7 compatibility table
  ...

Pull RCU updates from Ingo Molnar:
 "These are the latest RCU updates for v5.12:

   - Documentation updates.

   - Miscellaneous fixes.

   - kfree_rcu() updates: Addition of mem_dump_obj() to provide
     allocator return addresses to more easily locate bugs. This has a
     couple of RCU-related commits, but is mostly MM. Was pulled in with
     akpm's agreement.

   - Per-callback-batch tracking of numbers of callbacks, which enables
     better debugging information and smarter reactions to large numbers
     of callbacks.

   - The first round of changes to allow CPUs to be runtime switched
     from and to callback-offloaded state.

   - CONFIG_PREEMPT_RT-related changes.

   - RCU CPU stall warning updates.

   - Addition of polling grace-period APIs for SRCU.

   - Torture-test and torture-test scripting updates, including a
     "torture everything" script that runs rcutorture, locktorture,
     scftorture, rcuscale, and refscale. Plus does an allmodconfig
     build.

   - nolibc fixes for the torture tests"

* tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
  percpu_ref: Dump mem_dump_obj() info upon reference-count underflow
  rcu: Make call_rcu() print mem_dump_obj() info for double-freed callback
  mm: Make mem_obj_dump() vmalloc() dumps include start and length
  mm: Make mem_dump_obj() handle vmalloc() memory
  mm: Make mem_dump_obj() handle NULL and zero-sized pointers
  mm: Add mem_dump_obj() to print source of memory block
  tools/rcutorture: Fix position of -lgcc in mkinitrd.sh
  tools/nolibc: Fix position of -lgcc in the documented example
  tools/nolibc: Emit detailed error for missing alternate syscall number definitions
  tools/nolibc: Remove incorrect definitions of __ARCH_WANT_*
  tools/nolibc: Get timeval, timespec and timezone from linux/time.h
  tools/nolibc: Implement poll() based on ppoll()
  tools/nolibc: Implement fork() based on clone()
  tools/nolibc: Make getpgrp() fall back to getpgid(0)
  tools/nolibc: Make dup2() rely on dup3() when available
  tools/nolibc: Add the definition for dup()
  rcutorture: Add rcutree.use_softirq=0 to RUDE01 and TASKS01
  torture: Maintain torture-specific set of CPUs-online books
  torture: Clean up after torture-test CPU hotplugging
  rcutorture: Make object_debug also double call_rcu() heap object
  ...

Pull timer updates from Thomas Gleixner:
 "Time and timer updates:

   - Instead of new drivers remove tango, sirf, u300 and atlas drivers

   - Add suspend/resume support for microchip pit64b

   - The usual fixes, improvements and cleanups here and there"

* tag 'timers-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timens: Delete no-op time_ns_init()
  alarmtimer: Update kerneldoc
  clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resume
  clocksource/drivers/prima: Remove sirf prima driver
  clocksource/drivers/atlas: Remove sirf atlas driver
  clocksource/drivers/tango: Remove tango driver
  clocksource/drivers/u300: Remove the u300 driver
  dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified
  clocksource/drivers/davinci: Move pr_fmt() before the includes
  clocksource/drivers/efm32: Drop unused timer code

Pull irq updates from Thomas Gleixner:
 "Updates for the irq subsystem:

   - The usual new irq chip driver (Realtek RTL83xx)

   - Removal of sirfsoc and tango irq chip drivers

   - Conversion of the sun6i chip support to hierarchical irq domains

   - The usual fixes, improvements and cleanups all over the place"

* tag 'irq-core-2021-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/imx: IMX_INTMUX should not default to y, unconditionally
  irqchip/loongson-pch-msi: Use bitmap_zalloc() to allocate bitmap
  irqchip/csky-mpintc: Prevent selection on unsupported platforms
  irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller
  dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x support
  irqchip/ls-extirq: add IRQCHIP_SKIP_SET_WAKE to the irqchip flags
  genirq: Use new tasklet API for resend_tasklet
  dt-bindings: qcom,pdc: Add compatible for SM8350
  dt-bindings: qcom,pdc: Add compatible for SM8250
  irqchip/sun6i-r: Add wakeup support
  irqchip/sun6i-r: Use a stacked irqchip driver
  dt-bindings: irq: sun6i-r: Add a compatible for the H3
  dt-bindings: irq: sun6i-r: Split the binding from sun7i-nmi
  irqchip/gic-v3: Fix typos in PMR/RPR SCR_EL3.FIQ handling explanation
  irqchip: Remove sirfsoc driver
  irqchip: Remove sigma tango driver

Pull io_uring updates from Jens Axboe:
 "Highlights from this cycles are things like request recycling and
  task_work optimizations, which net us anywhere from 10-20% of speedups
  on workloads that mostly are inline.

  This work was originally done to put io_uring under memcg, which adds
  considerable overhead. But it's a really nice win as well. Also worth
  highlighting is the LOOKUP_CACHED work in the VFS, and using it in
  io_uring. Greatly speeds up the fast path for file opens.

  Summary:

   - Put io_uring under memcg protection. We accounted just the rings
     themselves under rlimit memlock before, now we account everything.

   - Request cache recycling, persistent across invocations (Pavel, me)

   - First part of a cleanup/improvement to buffer registration (Bijan)

   - SQPOLL fixes (Hao)

   - File registration NULL pointer fixup (Dan)

   - LOOKUP_CACHED support for io_uring

   - Disable /proc/thread-self/ for io_uring, like we do for /proc/self

   - Add Pavel to the io_uring MAINTAINERS entry

   - Tons of code cleanups and optimizations (Pavel)

   - Support for skip entries in file registration (Noah)"

* tag 'for-5.12/io_uring-2021-02-17' of git://git.kernel.dk/linux-block: (103 commits)
  io_uring: tctx->task_lock should be IRQ safe
  proc: don't allow async path resolution of /proc/thread-self components
  io_uring: kill cached requests from exiting task closing the ring
  io_uring: add helper to free all request caches
  io_uring: allow task match to be passed to io_req_cache_free()
  io-wq: clear out worker ->fs and ->files
  io_uring: optimise io_init_req() flags setting
  io_uring: clean io_req_find_next() fast check
  io_uring: don't check PF_EXITING from syscall
  io_uring: don't split out consume out of SQE get
  io_uring: save ctx put/get for task_work submit
  io_uring: don't duplicate io_req_task_queue()
  io_uring: optimise SQPOLL mm/files grabbing
  io_uring: optimise out unlikely link queue
  io_uring: take compl state from submit state
  io_uring: inline io_complete_rw_common()
  io_uring: move res check out of io_rw_reissue()
  io_uring: simplify iopoll reissuing
  io_uring: clean up io_req_free_batch_finish()
  io_uring: move submit side state closer in the ring
  ...

Pull block driver updates from Jens Axboe:

 - Remove the skd driver. It's been EOL for a long time (Damien)

 - NVMe pull requests
      - fix multipath handling of ->queue_rq errors (Chao Leng)
      - nvmet cleanups (Chaitanya Kulkarni)
      - add a quirk for buggy Amazon controller (Filippo Sironi)
      - avoid devm allocations in nvme-hwmon that don't interact well
        with fabrics (Hannes Reinecke)
      - sysfs cleanups (Jiapeng Chong)
      - fix nr_zones for multipath (Keith Busch)
      - nvme-tcp crash fix for no-data commands (Sagi Grimberg)
      - nvmet-tcp fixes (Sagi Grimberg)
      - add a missing __rcu annotation (Christoph)
      - failed reconnect fixes (Chao Leng)
      - various tracing improvements (Michal Krakowiak, Johannes
        Thumshirn)
      - switch the nvmet-fc assoc_list to use RCU protection (Leonid
        Ravich)
      - resync the status codes with the latest spec (Max Gurtovoy)
      - minor nvme-tcp improvements (Sagi Grimberg)
      - various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
        Kulkarni, Israel Rukshin)

 - Floppy O_NDELAY fix (Denis)

 - MD pull request
      - raid5 chunk_sectors fix (Guoqing)

 - Use lore links (Kees)

 - Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)

 - loop lock scaling (Pavel)

 - mtip32xx PCI fixes (Bjorn)

 - bcache fixes (Kai, Dongdong)

 - Misc fixes (Tian, Yang, Guoqing, Joe, Andy)

* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
  lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
  lightnvm: fix unnecessary NULL check warnings
  nvme-tcp: fix crash triggered with a dataless request submission
  block: Replace lkml.org links with lore
  nbd: Convert to DEFINE_SHOW_ATTRIBUTE
  nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
  nvme-hwmon: rework to avoid devm allocation
  nvmet: remove else at the end of the function
  nvmet: add nvmet_req_subsys() helper
  nvmet: use min of device_path and disk len
  nvmet: use invalid cmd opcode helper
  nvmet: use invalid cmd opcode helper
  nvmet: add helper to report invalid opcode
  nvmet: remove extra variable in id-ns handler
  nvmet: make nvmet_find_namespace() req based
  nvmet: return uniform error for invalid ns
  nvmet: set status to 0 in case for invalid nsid
  nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
  nvme-multipath: set nr_zones for zoned namespaces
  nvmet-tcp: fix potential race of tcp socket closing accept_work
  ...

Pull core block updates from Jens Axboe:
 "Another nice round of removing more code than what is added, mostly
  due to Christoph's relentless pursuit of tech debt removal/cleanups.
  This pull request contains:

   - Two series of BFQ improvements (Paolo, Jan, Jia)

   - Block iov_iter improvements (Pavel)

   - bsg error path fix (Pan)

   - blk-mq scheduler improvements (Jan)

   - -EBUSY discard fix (Jan)

   - bvec allocation improvements (Ming, Christoph)

   - bio allocation and init improvements (Christoph)

   - Store bdev pointer in bio instead of gendisk + partno (Christoph)

   - Block trace point cleanups (Christoph)

   - hard read-only vs read-only split (Christoph)

   - Block based swap cleanups (Christoph)

   - Zoned write granularity support (Damien)

   - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"

* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
  mm: simplify swapdev_block
  sd_zbc: clear zone resources for non-zoned case
  block: introduce blk_queue_clear_zone_settings()
  zonefs: use zone write granularity as block size
  block: introduce zone_write_granularity limit
  block: use blk_queue_set_zoned in add_partition()
  nullb: use blk_queue_set_zoned() to setup zoned devices
  nvme: cleanup zone information initialization
  block: document zone_append_max_bytes attribute
  block: use bi_max_vecs to find the bvec pool
  md/raid10: remove dead code in reshape_request
  block: mark the bio as cloned in bio_iov_bvec_set
  block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
  block: remove a layer of indentation in bio_iov_iter_get_pages
  block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
  block: remove the 1 and 4 vec bvec_slabs entries
  block: streamline bvec_alloc
  block: factor out a bvec_alloc_gfp helper
  block: move struct biovec_slab to bio.c
  block: reuse BIO_INLINE_VECS for integrity bvecs
  ...

Pull libata updates from Jens Axboe:
 "Regulartors management addition from Florian, and a trivial change to
  avoid comma separated statements from Joe"

* tag 'for-5.12/libata-2021-02-17' of git://git.kernel.dk/linux-block:
  ata: Avoid comma separated statements
  ata: ahci_brcm: Add back regulators management

Pull oprofile and dcookies removal from Viresh Kumar:
 "Remove oprofile and dcookies support

  The 'oprofile' user-space tools don't use the kernel OPROFILE support
  any more, and haven't in a long time. User-space has been converted to
  the perf interfaces.

  The dcookies stuff is only used by the oprofile code. Now that
  oprofile's support is getting removed from the kernel, there is no
  need for dcookies as well.

  Remove kernel's old oprofile and dcookies support"

* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  fs: Remove dcookies support
  drivers: Remove CONFIG_OPROFILE support
  arch: xtensa: Remove CONFIG_OPROFILE support
  arch: x86: Remove CONFIG_OPROFILE support
  arch: sparc: Remove CONFIG_OPROFILE support
  arch: sh: Remove CONFIG_OPROFILE support
  arch: s390: Remove CONFIG_OPROFILE support
  arch: powerpc: Remove oprofile
  arch: powerpc: Stop building and using oprofile
  arch: parisc: Remove CONFIG_OPROFILE support
  arch: mips: Remove CONFIG_OPROFILE support
  arch: microblaze: Remove CONFIG_OPROFILE support
  arch: ia64: Remove rest of perfmon support
  arch: ia64: Remove CONFIG_OPROFILE support
  arch: hexagon: Don't select HAVE_OPROFILE
  arch: arc: Remove CONFIG_OPROFILE support
  arch: arm: Remove CONFIG_OPROFILE support
  arch: alpha: Remove CONFIG_OPROFILE support