- Jul 30, 2015
-
-
Michael Holzheu authored
Currently we assumed the following BPF to eBPF register mapping: - BPF_REG_A -> BPF_REG_7 - BPF_REG_X -> BPF_REG_8 Unfortunately this mapping is wrong. The correct mapping is: - BPF_REG_A -> BPF_REG_0 - BPF_REG_X -> BPF_REG_7 So clear the correct registers and use the BPF_REG_A and BPF_REG_X macros instead of BPF_REG_0/7. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Fix mistakenly used, hard coded, port number in get_phv_bit() Fixes: 77fc29c4 ("net/mlx4_core: Preparations for 802.1ad VLAN support") Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 29, 2015
-
-
David S. Miller authored
Joachim Eastwood says: ==================== stmmac clean up for 4.3 part2 This patch set creates proper probe functions in the remaining dwmac-* drivers, lets the drivers manage their own of match data structure, and cleans up some of the drivers a bit. Note that should be no functional change in any of the drivers. First patch from Fengguang fixes a Coccinelle that was found after the previous patch set when into next. Probe functions are best placed just above the platform_driver struct since it usually needs to call other functions in the driver but this requires some code movement in the drivers. To keep the conversion itself easier to review the code movement is done in separate patches. This creates some extra churn but I think it's worth it in this case. As only a couple of drivers actually needs to use of match data this pushed down from stmmac_platform and into the drivers. This also makes it possible for drivers to have their own match data structure. dwmac-rk benefits most from this. After each driver has it's own probe function and manages it's own match data the setup/free hooks and common match data struct are removed. Sorry for the slightly largish patch set this time around. Since I can only test the core changes on my platform and not the specific dwmac-drivers I greatly appreciate if people could test this on their respective platforms. I did spend quite a bit of time visually checking all these patches, but nothing beats real hardware testing. Thanks! Patch set based on net-next can also be picked up from here: https://github.com/manabian/linux-lpc.git stmmac_4.3_part2 For those who want to have a look at all the patches for v4.3 a branch based on Linus master can be found here: https://github.com/manabian/linux-lpc.git stmmac_4.2 Previous parts can be found here: http://www.spinics.net/lists/netdev/msg328997.html http://www.spinics.net/lists/netdev/msg329932.html http://www.spinics.net/lists/netdev/msg336097.html ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Remove the two platform specific init callbacks and make them use a common one by creating a function member in the internal data structure. This allow us to remove the layer of indirection and simplify the code a bit. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
As all dwmac-* drivers have been converted to have a proper probe function the setup callback can now be removed. Also remove the free callback that wasn't used by any driver. New dwmac-* drivers should implement standard probe and remove functions to preform any needed setup and teardown. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
As dwmac-* drivers that need OF match have been converted to use their own internal OF match data structure this can now be removed. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Remove the setup glue callback and use rk_gmac_ops as OF match data so it can used directly when calling rk_gmac_setup. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Mark the rk_gmac_ops structures as static const as they should be. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Create a new private structure for OF match data in the dwmac-sti driver. This enables us to eventually drop the common OF match data structure which contains a lot of unused fields. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Since only a few of the dwmac-* drivers actually need to use the OF match move handling into the dwmac-* drivers that need it. This will also allow dwmac-* drivers to use their own custom match data structure. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
As all dwmac-* drivers now have their own probe function move the common one into dwmac-generic driver and drop the EXPORT. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Create a new probe functions that call the necessary setup functions. This is done in preparation for a code refactor in this driver and dropping the common probe function in stmmac_platform.c. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and prepares the driver for further clean ups. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Move sun7i_gmac_setup in preparation for turning it into a proper probe function. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Move socfpga_dwmac_probe in preparation for turning it into a proper probe function. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joachim Eastwood authored
Move ipq806x_gmac_fix_mac_speed in preparation for turning the setup glue callback in a proper probe function. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fengguang Wu authored
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:304:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> [je: rebase and insert newline before return] Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Lars Persson says: ==================== dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS This is a driver supporting version 4.10a of the Synopsys DWC Ethernet QoS gigabit ethernet controller. The IP has changed significantly compared to the dwmac1000 so a separate driver is justified. The IP is highly configurable at synthesis time. This driver has been developed for a subset of the total available feature set. Currently it supports: * TSO * Checksum offload for RX and TX. * Energy efficient ethernet. * GMII phy interface. * The statistics module. * Single RX and TX queue. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lars Persson authored
Add maintainer information for the Synopsys DWC Ethernet QOS driver. Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lars Persson authored
Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lars Persson authored
This patch adds a platform driver for the new generation of the gigabit ethernet IP from Synopsys. It is developed for version 4.10a of the IP core. Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lars Persson authored
Add device tree binding documentation for the Synopsys DWC Ethernet QoS driver supporting revision 4.10a of the hardware IP. Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 28, 2015
-
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx4_en: Hardware accelerated 802.1ad This patchset by Hadar introduces support in Hardware accelerated 802.1ad, for ConnectX-3pro NIC's. In order to support existing deployment, and due to some hardware limitations, the feature is disabled by default, and needed to be enabled using a private flag in ethtool. Ofcourse user can enable the private flag only if hardware has support. After being enabled, the standard ethtool -k/-K can be used. Patchset was applied and tested over commit 71790a27 ("hv_netvsc: Add structs and handlers for VF messages") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
To enable device support in accelerated 802.1ad vlan, the port capability "packet has vlan enable" (phv_en) should be set. Firmware won't work properly, in case phv_en is not set. The user can enable "phv_en" port capability with the new ethtool private flag phv-bit. The phv-bit private flag default value is OFF, users who are interested in 802.1ad hardware acceleration should turn ON the phv-bit private flag: $ ethtool --set-priv-flags eth1 phv-bit on Once the private flag is set, the device is ready for 802.1ad vlan acceleration. The user should also change the interface device features and turn on "tx-vlan-stag-hw-insert" which is off by default: $ ethtool -K eth1 tx-vlan-stag-hw-insert on "phv-bit" private flag setting is available only for Physical Functions(PF), the Virtual Function (VF) will be able to use the feature by setting "tx-vlan-stag-hw-insert" ethtool device feature only if the feature was enabled by the Hypervisor. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
To add Hardware accelerated support in 802.1ad vlan, replace Current VLAN macros to CVLAN. Replace: MLX4_WQE_CTRL_INS_VLAN MLX4_CQE_VLAN_PRESENT_MASK With: MLX4_WQE_CTRL_INS_CVLAN MLX4_CQE_CVLAN_PRESENT_MASK Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
Currently we support only one ethtool private flag. Prepare mlx4_en_set_priv_flags function to support more than one private flag. Will be used in the next patch to support hardware accelerated 802.1ad vlan. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
mlx4_core preparation to support hardware accelerated 802.1ad VLAN device. To allow 802.1ad accelerated device, "packet has vlan" (phv) Firmware capability should be available. Firmware without the phv capability won't behave properly and can't support 802.1ad device acceleration. The driver checks the Firmware capability and sets the phv bit accordingly in SET_PORT command. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Schichan says: ==================== ARM BPF JIT features This series adds support for more instructions to the ARM BPF JIT namely skb netdevice type retrieval, skb payload offset retrieval, and skb packet type retrieval. This allows 35 tests to use the JIT instead of 29 before. This series depends on the "BPF JIT fixes for ARM" serie sent earlier. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 27, 2015
-
-
Dan Carpenter authored
kfree_skb() is correct here. Fixes: ffce4196 ('lwtunnel: support dst output redirect function') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While doing experiments with reordering resilience, we found linux senders were not able to send at full speed under reordering, because every incoming SACK was releasing one MSS. This patch removes the limitation, as we did for CWR state in commit a0ea700e ("tcp: tso: allow CA_CWR state in tcp_tso_should_defer()") Neal Cardwell had a concern about limited transmit so Yuchung conducted experiments on GFE and found nothing worth adding an extra check on fast path : if (icsk->icsk_ca_state == TCP_CA_Disorder && tcp_sk(sk)->reordering == sysctl_tcp_reordering) goto send_now; Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Renesas Ethernet AVB controller requires that all data are aligned on 4-byte boundary. While it's easily achievable for the RX data with the help of skb_reserve() (we even align on 128-byte boundary as recommended by the manual), we can't do the same with the TX data, and it always comes unaligned from the networking core. Originally we solved it an easy way, copying all packet to a preallocated aligned buffer; however, it's enough to copy only up to 3 first bytes from each packet, doing the transfer using 2 TX descriptors instead of just 1. Here's an implementation of the new TX algorithm that significantly reduces the driver's memory requirements. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
Move the temperature sensing code for mv88e6352 and mv88e6320 families into mv88e6xxx.c to simplify adding support for additional chips. With this change, mv88e6xxx_6320_family() no longer needs to be a global function and is made static. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
This patch adds data structures and handlers for messages related to SRIOV Virtual Function. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Martin KaFai Lau says: ==================== ipv6: Avoid rt6_probe() taking writer lock in the fast path v1 -> v2: 1. Separate the code re-arrangement into another patch 2. Fix style ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-