- May 27, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains a few HD-audio device-specific quirks and an endianess fix for USB-audio, as well as the update of quirk model list document. All fixes are small and trivial. The document update could have been postponed, but it's a good thing for user and has absolutely zero risk of breakage, so included here" * tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430 ALSA: hda - Update the list of quirk models ALSA: hda - Provide dual-codecs model option for a few Realtek codecs ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo ALSA: hda - No loopback on ALC299 codec ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts
-
- May 26, 2017
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not a whole lot happening here, a set of amdgpu fixes and one core deadlock fix, and some misc drivers fixes" * tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: fix null point error when rmmod amdgpu. drm/amd/powerplay: fix a signedness bugs drm/amdgpu: fix NULL pointer panic of emit_gds_switch drm/radeon: Unbreak HPD handling for r600+ drm/amd/powerplay/smu7: disable mclk switching for high refresh rates drm/amd/powerplay/smu7: add vblank check for mclk switching (v2) drm/radeon/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu: fix fundamental suspend/resume issue drm/gma500/psb: Actually use VBT mode when it is found drm: Fix deadlock retry loop in page_flip_ioctl drm: qxl: Delay entering atomic context during cursor update drm/radeon: Fix oops upon driver load on PowerXpress laptops
-
Christoph Hellwig authored
We need to return an error for any call that asks for MSI / MSI-X vectors only, so that non-trivial fallback logic can work properly. Also valid dev->irq and use the "correct" errno value based on feedback from Linus. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A bunch of bug fixes: - Fix display flickering on some chips at high refresh rates - suspend/resume fix - hotplug fix - a couple of segfault fixes for certain cases * 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix null point error when rmmod amdgpu. drm/amd/powerplay: fix a signedness bugs drm/amdgpu: fix NULL pointer panic of emit_gds_switch drm/radeon: Unbreak HPD handling for r600+ drm/amd/powerplay/smu7: disable mclk switching for high refresh rates drm/amd/powerplay/smu7: add vblank check for mclk switching (v2) drm/radeon/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu: fix fundamental suspend/resume issue
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Core Changes: - Don't drop vblank reference more than once in cases of ww retry (Daniel) Driver Changes: - radeon: Fix oops during radeon probe trying to reference wrong device (Lukas) - qxl: Avoid sleeping while in atomic context on cursor update (Gabriel) - gma500: Use VBT mode instead of pre-programmed mode for LVDS (Patrik) Cc: Lukas Wunner <lukas@wunner.de> Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> * tag 'drm-misc-fixes-2017-05-25' of git://anongit.freedesktop.org/git/drm-misc: drm/gma500/psb: Actually use VBT mode when it is found drm: Fix deadlock retry loop in page_flip_ioctl drm: qxl: Delay entering atomic context during cursor update drm/radeon: Fix oops upon driver load on PowerXpress laptops
-
Rex Zhu authored
this bug happened when amdgpu load failed. [ 75.740951] BUG: unable to handle kernel paging request at 00000000000031c0 [ 75.748167] IP: [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.755774] PGD 0 [ 75.759185] Oops: 0000 [#1] SMP [ 75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E) [ 75.835574] cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E) [ 75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G OE 4.9.0-custom #2 [ 75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015 [ 75.875050] task: ffff88045d1bbb80 task.stack: ffffc90002de4000 [ 75.881094] RIP: 0010:[<ffffffffa064a0e0>] [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.891238] RSP: 0018:ffffc90002de7d48 EFLAGS: 00010286 [ 75.896648] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 75.903933] RDX: 0000000000000000 RSI: ffff88045d1bbb80 RDI: 0000000000000286 [ 75.911183] RBP: ffffc90002de7d50 R08: 0000000000000502 R09: 0000000000000004 [ 75.918449] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880464bf0000 [ 75.925675] R13: ffffffffa0853000 R14: 0000000000000000 R15: 0000564e44f88210 [ 75.932980] FS: 00007f13d5400700(0000) GS:ffff880476540000(0000) knlGS:0000000000000000 [ 75.941238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.947088] CR2: 00000000000031c0 CR3: 000000045fd0b000 CR4: 00000000003406e0 [ 75.954332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 75.961566] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 75.968834] Stack: [ 75.970881] ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80 [ 75.978454] ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8 [ 75.986076] ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000 [ 75.993692] Call Trace: [ 75.996177] [<ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu] [ 76.003700] [<ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm] [ 76.009777] [<ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm] [ 76.016255] [<ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm] [ 76.022139] [<ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu] [ 76.028800] [<ffffffff81416499>] pci_device_remove+0x39/0xc0 [ 76.034661] [<ffffffff81531caa>] __device_release_driver+0x9a/0x140 [ 76.041121] [<ffffffff81531e58>] driver_detach+0xb8/0xc0 [ 76.046575] [<ffffffff81530c95>] bus_remove_driver+0x55/0xd0 [ 76.052401] [<ffffffff815325fc>] driver_unregister+0x2c/0x50 [ 76.058244] [<ffffffff81416289>] pci_unregister_driver+0x29/0x90 [ 76.064466] [<ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm] [ 76.070507] [<ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu] [ 76.076609] [<ffffffff81104810>] SyS_delete_module+0x1a0/0x200 [ 76.082627] [<ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50 [ 76.089001] [<ffffffff8100392e>] do_syscall_64+0x6e/0x180 [ 76.094583] [<ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25 [ 76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03 [ 76.121432] RIP [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- May 25, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is quite a big update because it includes a rework of the lpfc driver to separate the NVMe part from the FC part. The reason for doing this is because two separate trees (the nvme and scsi trees respectively) want to update the individual components and this separation will prevent a really nasty cross tree entanglement by the time we reach the next merge window. The rest of the fixes are the usual minor sort with no significant security implications" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (25 commits) scsi: zero per-cmd private driver data for each MQ I/O scsi: csiostor: fix use after free in csio_hw_use_fwconfig() scsi: ufs: Clean up some rpm/spm level SysFS nodes upon remove scsi: lpfc: fix build issue if NVME_FC_TARGET is not defined scsi: lpfc: Fix NULL pointer dereference during PCI error recovery scsi: lpfc: update version to 11.2.0.14 scsi: lpfc: Add MDS Diagnostic support. scsi: lpfc: Fix NVMEI's handling of NVMET's PRLI response attributes scsi: lpfc: Cleanup entry_repost settings on SLI4 queues scsi: lpfc: Fix debugfs root inode "lpfc" not getting deleted on driver unload. scsi: lpfc: Fix NVME I+T not registering NVME as a supported FC4 type scsi: lpfc: Added recovery logic for running out of NVMET IO context resources scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context scsi: lpfc: Separate NVMET data buffer pool fir ELS/CT. scsi: lpfc: Fix NMI watchdog assertions when running nvmet IOPS tests scsi: lpfc: Fix NVMEI driver not decrementing counter causing bad rport state. scsi: lpfc: Fix nvmet RQ resource needs for large block writes. scsi: lpfc: Adding additional stats counters for nvme. scsi: lpfc: Fix system crash when port is reset. scsi: lpfc: Fix used-RPI accounting problem. ...
-
Dan Carpenter authored
Smatch complains about a signedness bug here: vega10_hwmgr.c:4202 vega10_force_clock_level() warn: always true condition '(i >= 0) => (0-u32max >= 0)' Fixes: 7b52db39 ("drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Chunming Zhou authored
[ 338.384770] BUG: unable to handle kernel NULL pointer dereference at (null) [ 338.384817] IP: [< (null)>] (null) [ 338.385505] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 338.385950] Call Trace: [ 338.385993] [<ffffffffa05d2313>] ? amdgpu_vm_flush+0x283/0x400 [amdgpu] [ 338.386025] [<ffffffff811818d3>] ? printk+0x4d/0x4f [ 338.386074] [<ffffffffa05d4906>] amdgpu_ib_schedule+0x4a6/0x4d0 [amdgpu] [ 338.386140] [<ffffffffa0673e54>] amdgpu_job_run+0x64/0x180 [amdgpu] [ 338.386203] [<ffffffffa0672e09>] amd_sched_main+0x2e9/0x4a0 [amdgpu] [ 338.386232] [<ffffffff810bfce0>] ? prepare_to_wait_event+0x110/0x110 [ 338.386295] [<ffffffffa0672b20>] ? amd_sched_select_entity+0xe0/0xe0 [amdgpu] [ 338.386327] [<ffffffff8109b423>] kthread+0xd3/0xf0 [ 338.386349] [<ffffffff8109b350>] ? kthread_park+0x60/0x60 [ 338.386376] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30 [ 338.386401] Code: Bad RIP value. [ 338.386420] RIP [< (null)>] (null) [ 338.386443] RSP <ffffc90001bd7d40> [ 338.386458] CR2: 0000000000000000 [ 338.398508] ---[ end trace 4c66fcdc74b9a0a2 ]--- Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Lyude authored
We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Even if the vblank period would allow it, it still seems to be problematic on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Check to make sure the vblank period is long enough to support mclk switching. v2: drop needless initial assignment (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Reinitializing the VM manager during suspend/resume is a very very bad idea since all the VMs are still active and kicking. This can lead to random VM faults after resume when new processes become the same client ID assigned. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- May 24, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull ptrace fix from Eric Biederman: "This fixes a brown paper bag bug. When I fixed the ptrace interaction with user namespaces I added a new field ptracer_cred in struct_task and I failed to properly initialize it on fork. This dangling pointer wound up breaking runing setuid applications run from the enlightenment window manager. As this is the worst sort of bug. A regression breaking user space for no good reason let's get this fixed" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Properly initialize ptracer_cred on fork
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v4.12 rc3: - sdhci-xenon: Don't free data for phy allocated by devm* - sdhci-iproc: Suppress spurious interrupts - cavium: Fix probing race with regulator - cavium: Prevent crash with incomplete DT - cavium-octeon: Use proper GPIO name for power control - cavium-octeon: Fix interrupt enable code" * tag 'mmc-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read mmc: cavium: Fix probing race with regulator of/platform: Make of_platform_device_destroy globally visible mmc: cavium: Prevent crash with incomplete DT mmc: cavium-octeon: Use proper GPIO name for power control mmc: cavium-octeon: Fix interrupt enable code mmc: sdhci-xenon: kill xenon_clean_phy()
-
Patrik Jakobsson authored
With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562 Cc: <stable@vger.kernel.org> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Fix the i2c-designware regression of rc2. Also, a DMA buffer fix for the tiny-usb driver where the USB core now loudly complains about the non DMA-capable buffer" [ I had cherry-picked the designware fix separately because it hit my laptop, but here is the proper sync with the i2c tree - Linus ] * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Fix bogus sda_hold_time due to uninitialized vars i2c: i2c-tiny-usb: fix buffer not being DMA capable
-
- May 23, 2017
-
-
Eric W. Biederman authored
When I introduced ptracer_cred I failed to consider the weirdness of fork where the task_struct copies the old value by default. This winds up leaving ptracer_cred set even when a process forks and the child process does not wind up being ptraced. Because ptracer_cred is not set on non-ptraced processes whose parents were ptraced this has broken the ability of the enlightenment window manager to start setuid children. Fix this by properly initializing ptracer_cred in ptrace_init_task This must be done with a little bit of care to preserve the current value of ptracer_cred when ptrace carries through fork. Re-reading the ptracer_cred from the ptracing process at this point is inconsistent with how PT_PTRACE_CAP has been maintained all of these years. Tested-by:
Takashi Iwai <tiwai@suse.de> Fixes: 64b875f7 ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
Daniel Vetter authored
I failed to properly onion-wrap the unwind code: We acquire the vblank reference before we start with the wait-wound locking dance, hence we must make sure we retry before we drop the reference. Oops. v2: The vblank_put must be after the frambuffer_put (Michel). I suck at unwrapping code that doesn't use separate labels for each stage, but checks each pointer first ... While re-reading everything I also realized that we must clean up the fb refcounts, and specifically plane->old_fb before we drop the locks, either in the final unlocking, or in the w/w retry path. Hence the correct fix is to drop the vblank_put to the very bottom. Fixes: 29dc0d1d ("drm: Roll out acquire context for the page_flip ioctl") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reported-by:
Tommi Rantala <tt.rantala@gmail.com> Cc: Tommi Rantala <tt.rantala@gmail.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by:
Tommi Rantala <tt.rantala@gmail.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170522135945.28831-1-daniel.vetter@ffwll.ch
-
Gabriel Krisman Bertazi authored
qxl_release_map will enter an atomic context, but since we still need to alloc memory for BOs, we better delay that until we have everything we need, in case we need to sleep inside the allocation. This avoids the Sleep in atomic state below, which was reported by Mike. [ 43.910362] BUG: sleeping function called from invalid context at mm/slab.h:432 [ 43.910955] in_atomic(): 1, irqs_disabled(): 0, pid: 2077, name: Xorg [ 43.911472] Preemption disabled at: [ 43.911478] [<ffffffffa02b1c45>] qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.912103] CPU: 0 PID: 2077 Comm: Xorg Tainted: G E 4.12.0-master #38 [ 43.912550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20161202_174313-build11a 04/01/2014 [ 43.913202] Call Trace: [ 43.913371] dump_stack+0x65/0x89 [ 43.913581] ? qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.913876] ___might_sleep+0x11a/0x190 [ 43.914095] __might_sleep+0x4a/0x80 [ 43.914319] ? qxl_bo_create+0x50/0x190 [qxl] [ 43.914565] kmem_cache_alloc_trace+0x46/0x180 [ 43.914836] qxl_bo_create+0x50/0x190 [qxl] [ 43.915082] ? refcount_dec_and_test+0x11/0x20 [ 43.915332] ? ttm_mem_io_reserve+0x41/0xe0 [ttm] [ 43.915595] qxl_alloc_bo_reserved+0x37/0xb0 [qxl] [ 43.915884] qxl_cursor_atomic_update+0x8f/0x260 [qxl] [ 43.916172] ? drm_atomic_helper_update_legacy_modeset_state+0x1d6/0x210 [drm_kms_helper] [ 43.916623] drm_atomic_helper_commit_planes+0xec/0x230 [drm_kms_helper] [ 43.916995] drm_atomic_helper_commit_tail+0x2b/0x60 [drm_kms_helper] [ 43.917398] commit_tail+0x65/0x70 [drm_kms_helper] [ 43.917693] drm_atomic_helper_commit+0xa9/0x100 [drm_kms_helper] [ 43.918039] drm_atomic_commit+0x4b/0x50 [drm] [ 43.918334] drm_atomic_helper_update_plane+0xf1/0x110 [drm_kms_helper] [ 43.918902] __setplane_internal+0x19f/0x280 [drm] [ 43.919240] drm_mode_cursor_universal+0x101/0x1c0 [drm] [ 43.919541] drm_mode_cursor_common+0x15b/0x1d0 [drm] [ 43.919858] drm_mode_cursor2_ioctl+0xe/0x10 [drm] [ 43.920157] drm_ioctl+0x211/0x460 [drm] [ 43.920383] ? drm_mode_cursor_ioctl+0x50/0x50 [drm] [ 43.920664] ? handle_mm_fault+0x93/0x160 [ 43.920893] do_vfs_ioctl+0x96/0x6e0 [ 43.921117] ? __fget+0x73/0xa0 [ 43.921322] SyS_ioctl+0x41/0x70 [ 43.921545] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 43.922188] RIP: 0033:0x7f1145804bc7 [ 43.922526] RSP: 002b:00007ffcd3e50508 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 43.923367] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007f1145804bc7 [ 43.923852] RDX: 00007ffcd3e50540 RSI: 00000000c02464bb RDI: 000000000000000b [ 43.924299] RBP: 0000000000000040 R08: 0000000000000040 R09: 000000000000000c [ 43.924694] R10: 00007ffcd3e50340 R11: 0000000000003246 R12: 0000000000000018 [ 43.925128] R13: 00000000022bc390 R14: 0000000000000040 R15: 00007ffcd3e5062c Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170519175819.15682-1-krisman@collabora.co.uk Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Alexander Tsoy authored
This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a regression in the skcipher interface that allows bogus key parameters to hit underlying implementations which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Add missing API setkey checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests
-
Jan Kiszka authored
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kees Cook authored
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by:
Marta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580 ("pstore: Replace arguments for write() API") Fixes: a61072aa ("pstore: Replace arguments for erase() API") Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
Marta Lofstedt <marta.lofstedt@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ...
-
Jiri Pirko authored
Since the head is guaranteed by the check above to be null, the call_rcu would explode. Remove the previously logically dead code that was made logically very much alive and kicking. Fixes: 985538ee ("net/sched: remove redundant null check on head") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f ("net: fix sleeping for sk_wait_event()"). Reported-by:
Michal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarod Wilson authored
In commit dc9c4d0f, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines: [ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0 [ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.204892] lacp0: Setting MII monitoring interval to 100 [ 32.211071] lacp0: Removing ARP target 216.124.228.17 [ 32.216824] lacp0: Removing ARP target 218.160.255.255 [ 32.222646] lacp0: Removing ARP target 185.170.136.184 [ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.243987] lacp0: Removing ARP target 56.125.228.17 [ 32.249625] lacp0: Removing ARP target 218.160.255.255 [ 32.255432] lacp0: Removing ARP target 15.157.233.184 [ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.276632] lacp0: Removing ARP target 16.0.0.0 [ 32.281755] lacp0: Removing ARP target 218.160.255.255 [ 32.287567] lacp0: Removing ARP target 72.125.228.17 [ 32.293165] lacp0: Removing ARP target 218.160.255.255 [ 32.298970] lacp0: Removing ARP target 8.125.228.17 [ 32.304458] lacp0: Removing ARP target 218.160.255.255 None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled. The fix: just zero out arp_target at init time. While we're in here, init arp_all_targets_value in the right place. Fixes: dc9c4d0f ("bonding: reduce scope of some global variables") CC: Mahesh Bandewar <maheshb@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
* pm-sleep: PM / hibernate: Declare variables as static RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() * powercap: PowerCap: Fix an error code in powercap_register_zone()
-
Rafael J. Wysocki authored
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
-
Rafael J. Wysocki authored
* intel_pstate: cpufreq: intel_pstate: Document the current behavior and user interface * pm-cpufreq: cpufreq: dbx500: add a Kconfig symbol * pm-cpufreq-sched: cpufreq: schedutil: use now as reference when aggregating shared policy requests
-
David S. Miller authored
The assignmnet: ip_align = strict ? 2 : NET_IP_ALIGN; in compare_pkt_ptr_alignment() trips up Coverity because we can only get to this code when strict is true, therefore ip_align will always be 2 regardless of NET_IP_ALIGN's value. So just assign directly to '2' and explain the situation in the comment above. Reported-by:
"Gustavo A. R. Silva" <garsilva@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Srinath Mannam authored
The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Jarod Wilson authored
As of 7bb11dc9 and 0622cab0, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Khoroshilov authored
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-