- Dec 13, 2006
-
-
Roland Dreier authored
Remove variables that are set but then never looked at in the iSER initiator. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
Remove variables that are set but then never looked at in the ipath driver. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
ib_flush_fmr_pool() stashes away the request generation number properly, but then goes ahead and rereads it every time it tests whether the flush generation number has caught up. This means that there is a theoretical possibility of livelock, if the request generation number keeps getting bumped and the flush generation number never catches up. The fix is simple: use the request generation number read at the beginning of the function. Also, atomic_inc() followed by atomic_read() can be replaced with atomic_int_return(). There's no real requirement for atomicity here but we might as well shrink the code. This bug was discovered using David Binderman's list of "set but never used" warnings from icc. Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Nicolas Pitre authored
Commit 2d4ba4a3 introduced a dependency that was never meant to exist when the ac97_bus.c module was created. Move ac97_bus.c up the directory hierarchy to make sure it is built when selected even if sound is configured out so things work as originally intended. Signed-off-by:
Nicolas Pitre <nico@cam.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [patch 3/3] OCFS2 Configurable timeouts - Protocol changes [patch 2/3] OCFS2 Configurable timeouts [patch 1/3] OCFS2 - Expose struct o2nm_cluster ocfs2: Synchronize feature incompat flags in ocfs2_fs.h ocfs2: update mount option documentation ocfs2: local mounts
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix OMAP clock prescaler to match the comment i2c: Refactor a kfree in i2c-dev i2c: Fix return value check in i2c-dev i2c: Enable PEC on more i2c-i801 devices i2c: Discard the i2c algo del_bus wrappers i2c: New ARM Versatile/Realview bus driver i2c: fix broken ds1337 initialization i2c: i2c-i801 documentation update i2c: Use the __ATTR macro where possible i2c: Whitespace cleanups i2c: Use put_user instead of copy_to_user where possible i2c: New Atmel AT91 bus driver i2c: Add support for nested i2c bus locking i2c: Cleanups to the i2c-nforce2 bus driver i2c: Add request/release_mem_region to i2c-ibm_iic bus driver i2c: New Philips PNX bus driver i2c: Delete the broken i2c-ite bus driver i2c: Update the list of driver IDs i2c: Fix documentation typos
-
Ingo Molnar authored
current -git doesnt boot on my laptop due to netpoll not unlocking the tx lock in the else branch. booted this up on my laptop with lockdep enabled and there are no locking complaints and it works fine. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits) sh: Fixup SH-2 BUG() trap handling. sh: Use early_param() for earlyprintk parsing. sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096. sh: Fixup .data.page_aligned. sh: Hook up SH7722 scif ipr interrupts. sh: Fixup sh_bios() trap handling. sh: SH-MobileR SH7722 CPU support. sh: Fixup dma_cache_sync() callers. sh: Convert remaining remap_area_pages() users to ioremap_page_range(). sh: Fixup kernel_execve() for syscall cleanups. sh: Fix get_wchan(). sh: BUG() handling through trapa vector. rtc: rtc-sh: alarm support. rtc: rtc-sh: fix rtc for out-by-one for the month. sh: Kill off unused SE7619 I/O ops. serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings. sh: Split out atomic ops logically. sh: Fix Solution Engine 7619 build. sh: Trivial build fixes for SH-2 support. sh: IPR IRQ updates for SH7619/SH7206. ...
-
Ingo Molnar authored
fix deadlock in the 8139too driver: poll handlers should never forcibly enable local interrupts, because they might be used by netpoll/printk from IRQ context. ================================= [ INFO: inconsistent lock state ] 2.6.19 #11 --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (&npinfo->poll_lock){-+..}, at: [<c0350a41>] net_rx_action+0x64/0x1de {softirq-on-W} state was registered at: [<c0134c86>] mark_lock+0x5b/0x39c [<c0135012>] mark_held_locks+0x4b/0x68 [<c01351e9>] trace_hardirqs_on+0x115/0x139 [<c02879e6>] rtl8139_poll+0x3d7/0x3f4 [<c035c85d>] netpoll_poll+0x82/0x32f [<c035c775>] netpoll_send_skb+0xc9/0x12f [<c035cdcc>] netpoll_send_udp+0x253/0x25b [<c0288463>] write_msg+0x40/0x65 [<c011cead>] __call_console_drivers+0x45/0x51 [<c011cf16>] _call_console_drivers+0x5d/0x61 [<c011d4fb>] release_console_sem+0x11f/0x1d8 [<c011d7d7>] register_console+0x1ac/0x1b3 [<c02883f8>] init_netconsole+0x55/0x67 [<c010040c>] init+0x9a/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff irq event stamp: 819992 hardirqs last enabled at (819992): [<c0350a16>] net_rx_action+0x39/0x1de hardirqs last disabled at (819991): [<c0350b1e>] net_rx_action+0x141/0x1de softirqs last enabled at (817552): [<c01214e4>] __do_softirq+0xa3/0xa8 softirqs last disabled at (819987): [<c0106051>] do_softirq+0x5b/0xc9 other info that might help us debug this: no locks held by swapper/1. stack backtrace: [<c0104d88>] dump_trace+0x63/0x1e8 [<c0104f26>] show_trace_log_lvl+0x19/0x2e [<c010532d>] show_trace+0x12/0x14 [<c0105343>] dump_stack+0x14/0x16 [<c0134980>] print_usage_bug+0x23c/0x246 [<c0134d33>] mark_lock+0x108/0x39c [<c01356a7>] __lock_acquire+0x361/0x9ed [<c0136018>] lock_acquire+0x56/0x72 [<c03aff1f>] _spin_lock+0x35/0x42 [<c0350a41>] net_rx_action+0x64/0x1de [<c0121493>] __do_softirq+0x52/0xa8 [<c0106051>] do_softirq+0x5b/0xc9 [<c0121338>] irq_exit+0x3c/0x48 [<c0106163>] do_IRQ+0xa4/0xbd [<c01047c6>] common_interrupt+0x2e/0x34 [<c011db92>] vprintk+0x2c0/0x309 [<c011dbf6>] printk+0x1b/0x1d [<c01003f2>] init+0x80/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 ======================= Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
seqlock_init() needs to use spin_lock_init() for dynamic locks, so that lockdep is notified about the presence of a new lock. (this is a fallout of the recent networking merge, which started using the so-far unused seqlock_init() API.) This fix solves the following lockdep-internal warning on current -git: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. __lock_acquire+0x10c/0x9f9 lock_acquire+0x56/0x72 _spin_lock+0x35/0x42 neigh_destroy+0x9d/0x12e neigh_periodic_timer+0x10a/0x15c run_timer_softirq+0x126/0x18e __do_softirq+0x6b/0xe6 do_softirq+0x64/0xd2 ksoftirqd+0x82/0x138 Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated
-
- Dec 12, 2006
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Fix conflicting superblock flags
-
Mauro Carvalho Chehab authored
i2c defines two callbacks (inb/outb). On ia64, since it defines also two macros with those names, it causes the following errors: drivers/media/video/usbvision/usbvision-i2c.c:64:39: macro "outb" passed 4 arguments, but takes just 2 drivers/media/video/usbvision/usbvision-i2c.c: In function `try_write_address': drivers/media/video/usbvision/usbvision-i2c.c:64: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:89:38: macro "inb" passed 4 arguments, but takes just 1 drivers/media/video/usbvision/usbvision-i2c.c: In function `try_read_address': drivers/media/video/usbvision/usbvision-i2c.c:89: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:85: warning: unused variable `buf' drivers/media/video/usbvision/usbvision-i2c.c:173:53: macro "inb" passed 4 arguments, but takes just 1 drivers/media/video/usbvision/usbvision-i2c.c: In function `usb_xfer': drivers/media/video/usbvision/usbvision-i2c.c:173: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:179:54: macro "outb" passed 4 arguments, but takes just 2 drivers/media/video/usbvision/usbvision-i2c.c:179: warning: assignment makes integer from pointer without a cast thanks to Andrew Morton for pointing this. Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
FUJITA Tomonori authored
When I converted the original patch, I left unnecessary blk_queue_bounce in SG_IO. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
FUJITA Tomonori authored
This patch fixes bio leaks in SG_IO. rq->bio can be changed after io completion, so we need to reset rq->bio before calling blk_rq_unmap_user() http://marc.theaimsgroup.com/?l=linux-kernel&m=116570666807983&w=2 Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
Boaz Harrosh authored
While working on bidi support at struct request level I have found that blk_queue_activity_fn is actually never used. The only user is in ide-probe.c with this code: /* enable led activity for disk drives only */ if (drive->media == ide_disk && hwif->led_act) blk_queue_activity_fn(q, hwif->led_act, drive); And led_act is never initialized anywhere. (Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18) Unless it is all for future use off course. (this patch is against linux-2.6-block.git as off 2006/12/4) Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) [NETPOLL]: Fix local_bh_enable() warning. [IPVS]: Make ip_vs_sync.c <= 80col wide. [IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep() [HAMRADIO]: Fix baycom_epp.c compile failure. [DCCP]: Whitespace cleanups [DCCP] ccid3: Fixup some type conversions related to rtts [DCCP] ccid3: BUG-FIX - conversion errors [DCCP] ccid3: Reorder packet history source file [DCCP] ccid3: Reorder packet history header file [DCCP] ccid3: Make debug output consistent [DCCP] ccid3: Perform history operations only after packet has been sent [DCCP] ccid3: TX history - remove unused field [DCCP] ccid3: Shift window counter computation [DCCP] ccid3: Sanity-check RTT samples [DCCP] ccid3: Initialise RTT values [DCCP] ccid: Deprecate ccid_hc_tx_insert_options [DCCP]: Warn when discarding packet due to internal errors [DCCP]: Only deliver to the CCID rx side in charge [DCCP]: Simplify TFRC calculation [DCCP]: Debug timeval operations ...
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds authored
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Add missing #include <linux/param.h> to delay.c [AVR32] Pass dev parameter to dma_cache_sync() [AVR32] Implement intc_get_pending() [AVR32] Don't include <asm/delay.h> [AVR32] Put the chip in "stop" mode when halting the system [AVR32] Set flow handler for external interrupts [AVR32] Remove unused file [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data [AVR32] Move ethernet tag parsing to board-specific code [AVR32] Add macb1 platform_device [AVR32] Portmux API update
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits) [POWERPC] Generic BUG for powerpc [PPC] Fix compile failure do to introduction of PHY_POLL [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set [POWERPC] Remove old dcr.S [POWERPC] Fix SPU coredump code for max_fdset removal [POWERPC] Fix irq routing on some 32-bit PowerMacs [POWERPC] ps3: Add vuart support [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes [POWERPC] dont allow pSeries_probe to succeed without initialising MMU [POWERPC] micro optimise pSeries_probe [POWERPC] Add SPURR SPR to sysfs [POWERPC] Add DSCR SPR to sysfs [POWERPC] Fix 440SPe CPU table entry [POWERPC] Add support for FP emulation for the e300c2 core [POWERPC] of_device_register: propagate device_create_file return code [POWERPC] Fix mmap of PCI resource with hack for X [POWERPC] iSeries: head_64.o needs to depend on lparmap.s [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group [POWERPC] Remove QE header files from lite5200.c [POWERPC] of_platform_make_bus_id(): make `magic' int ...
-
Franck Bui-Huu authored
This patch makes paging_init() use highend_pfn/highstart_pfn globals. It removes the need of 'high' local which was needed only by HIGHMEM config. More important perhaps, it fixes a bug when HIGHMEM is set but there's actually no physical highmem (highend_pfn = 0) Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
While the recent cset 86384d54 did improve things it didn't resolve all the problems. So bite the bullet and discard .exit.text and .exit.data at runtime. Which of course sucks because it bloats binaries with code that will never ever be used but it's the only thing that will work reliable as demonstrated by the function sd_major() in drivers/scsi/sd.c. Gcc may compile sd_major() using a jump table which it will put into .rodata. If it also inlines sd_major's function body into exit_sd() which gcc > 3.4.x does. If CONFIG_BLK_DEV_SD has been set to y we would like ld to discard exit_sd's code at link time. However sd_major happens to contain a switch statement which gcc will compile using a jump table in .rodata on the architectures I checked. So, when ld later discards .exit.text only the jump table in .rodata with its stale references to the discard .exit.text will be left which any no antique ld will honor with a link error. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Another way that old SGI types were getting dragged into generic code. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This also fixes the duplicate definition of nic_t in the s2io driver. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Nothing <asm/sn/arch.h> defines is used. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Andrew Morton authored
During boot we get: netconsole: device eth0 not up yet, forcing it e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex WARNING (!__warned) at kernel/softirq.c:137 local_bh_enable() Call Trace: [<ffffffff80235baf>] local_bh_enable+0x41/0xa3 [<ffffffff8045ab8e>] netpoll_send_skb+0x116/0x144 [<ffffffff8045b1ee>] netpoll_send_udp+0x263/0x271 [<ffffffff803d41ec>] write_msg+0x42/0x5e [<ffffffff80230c9b>] __call_console_drivers+0x5f/0x70 [<ffffffff80230d19>] _call_console_drivers+0x6d/0x71 [<ffffffff802313f0>] release_console_sem+0x148/0x1ec [<ffffffff802316ce>] register_console+0x1b1/0x1ba [<ffffffff803d4178>] init_netconsole+0x54/0x68 [<ffffffff802071ae>] init+0x152/0x308 [<ffffffff804dac8b>] _spin_unlock_irq+0x14/0x30 [<ffffffff8022c15e>] schedule_tail+0x43/0x9f [<ffffffff8020a758>] child_rip+0xa/0x12 Herbert sayeth: Normally networking isn't invoked with interrupts turned off, but I suppose we don't have a choice here. This is unique being a place where you can get called with BH on, off, or IRQs off. Given that this is only used for printk, the easiest solution is probably just to disable local IRQs instead of BH. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yoshinori Sato authored
This adds in support for the BUG() trap on SH-2. Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This had a bogus .data.idt reference, fix it up.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Add the SCIF IRQs to the IPR table for SH7722. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This was inadvertently broken when the entry.S code split up, restore the missing branch and get subsequent traps working under debug again. This manifested itself as a lockup when attempting to reload the VBR base. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This adds CPU support for the SH7722. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This now takes a struct device, update all of the callers. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
A couple of these were missed. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
SH-2 and SH-2A need to use a different syscall base for the trapa vector than the other parts, so fixup the logic in the kernel_execve() case. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Some time ago the schedule frame size changed and we failed to reflect this in get_wchan() at the time. This first popped up as a problem on SH7751R where schedule_frame ended up being unaligned and generating an unaligned trap. This fixes it up again.. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Previously we haven't been doing anything with verbose BUG() reporting, and we've been relying on the oops path for handling BUG()'s, which is rather sub-optimal. This switches BUG handling to use a fixed trapa vector (#0x3e) where we construct a small bug frame post trapa instruction to get the context right. This also makes it trivial to wire up a DIE_BUG for the atomic die chain, which we couldn't really do before. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Jamie Lenehan authored
This adds alarm support for the RTC_ALM_SET, RTC_ALM_READ, RTC_WKALM_SET and RTC_WKALM_RD operations to rtc-sh. The only unusual part is the handling of the alarm interrupt. If you clear the alarm flag (AF) while the time in the RTC still matches the time in the alarm registers than AF is immediately re-set, and if the alarm interrupt (AIE) is still enabled then it re-triggers. I was originally getting around 20k+ interrupts generated during the second when the RTC and alarm registers matches. The solution I've used is to clear AIE when the alarm goes off and then use the carry interrupt to re-enabled it. The carry interrupt will check AF and re-enabled AIE if it's clear. If AF is not clear it'll clear it and then the check will be repeated next carry interrupt. This a bit in rtc structure that indicates that it's waiting to have AIE re-enabled so it doesn't turn it on when it wasn't enabled anyway. Signed-off-by:
Jamie Lenehan <lenehan@twibble.org> Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-