- Jul 11, 2007
-
-
Adrian Bunk authored
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Jay Vosburgh authored
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Alexey Dobriyan authored
Code will do local_irq_save() on it. Signed-off-by:
Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Peter Korsgaard authored
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Francois Romieu authored
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Olof Johansson authored
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Olof Johansson authored
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Ben Dooks authored
Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Alan Cox authored
Convert the IOC3 driver to use ref counting pci interfaces so that we can obsolete the (usually unsafe) pci_find_{slot/device} interfaces and avoid future authors writing hotplug-unsafe device drivers. Signed-off-by:
Alan Cox <alan@redhat.com> Build fixes: Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
David Graham authored
The 82550 & 51 parts have an extended configuration block that includes a bit "GMRC", required to enable the expected TCO behavior, in config byte offset 22d. The config block sent by the failing driver does include the extension area, but this bit is not initialised, and the downlaod only specifies 0x16 bytes to be sent to the NIC (thaht's bytes 00..21d). By initializing the GMRC bit, and extending the download size for D102+ MACs, the problem is resolved. Signed-off-by:
David Graham <david.graham@intel.com> Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Timur Tabi authored
The QE Ethernet driver was writing to the wrong register to mask interrupts. In ucc_geth_stop(), it was clearing UCCE instead of UCCM. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x26e3f2): Section mismatch: reference to .init.text:rr_init (between 'rr_init_one' and 'rr_remove_one') ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x361ef1): Section mismatch: reference to .init.text:xl_init (between 'xl_probe' and 'xl_hw_reset') ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Rolf Eike Beer authored
Introduced in d796fdb7 . Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Marcin Juszkiewicz authored
One card submitted by Ångström user. Signed-off-by:
Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Ishizaki Kou authored
We intend this patch to improve spidernet interrupt handling to be more strict. We had following problem and this patch solves it. -when CONFIG_DEBUG_SHIRQ=y, request_irq() calls handler(). -when spider_net_open() is called, it calls request_irq() which calls spider_net_interrupt(). -if some specific interrupt bit is set at this timing, it calls netif_rx_schedule() and spider_net_poll() is scheduled. -spider_net_open() calls netif_poll_enable() which clears the bit __LINK_STATE_RX_SCHED. -when spider_net_poll() is called, it calls netif_rx_complete() which causes BUG_ON() because __LINK_STATE_RX_SCHED is not set. Signed-off-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Steffen Klassert authored
The 3cSOHO100-TX needs a mdio_sync() before mdio_read() to read the MII transceiver registers properly. Adding EXTRA_PREAMBLE to drv_flags of the 3cSOHO100-TX will force this. This problem exists already for years (I checked back to 2.6.8). Setting duplex for the 3cSOHO100-TX was more or less a random process. Till 2.6.15 it was more likely that the diver ends up in half duplex mode, after the code change in 2.6.16 it was more likely to end up in full duplex mode. I wonder why nobody noticed this earier. Hopefully addresses Bug 7454 3c59x (3cSOHO100-TX Hurricane) slow network bug http://bugzilla.kernel.org/show_bug.cgi?id=7454 and Bug 3654 3cSOHO100-TX: No MII transceiver present http://bugzilla.kernel.org/show_bug.cgi?id=3654 Cc: Jonas Sandberg <jonassa@gmail.com> Cc: Jon Sanchez <bugs@niluje.net> Signed-off-by:
Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
vignesh babu authored
Replace (n & (n-1)) with is_power_of_2() Signed-off-by:
vignesh babu <vignesh.babu@wipro.com> Cc: Brice Goglin <brice@myri.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
vignesh babu authored
Replace (n & (n-1)) with is_power_of_2() Signed-off-by:
vignesh babu <vignesh.babu@wipro.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Yoann Padioleau authored
Use consistent function declaration style. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Eliminate extra debug messages Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Use upper_32_bits() inline Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Use roundup() macro to size receive buffer. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
If packet larger than MTU is received, the driver uses hardware to truncate the packet. Use the status registers to catch/drop them. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Add get/set eeprom support for sky2. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Simplify receive buffer refill logic. Rather than trying to update incrementally; do receive ring refill at end of receive processing. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
This patch avoids generating another IRQ if more packets arrive while in the NAPI poll routine. Before marking device as finished, it rechecks that the status ring is empty. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Add an optional debug interface for displaying state of transmit/receive rings. Creates a file debugfs/sky2/ethX for each device that is up. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Make sky2 handle carrier similar to other drivers, eliminate some possible races in carrier state transistions. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
This patch restores a couple of workarounds from 2.6.16: * restart transmit moderation timer in case it expires during IRQ routine * default to having 10 HZ watchdog timer. At this point it more important not to hang than to worry about the power cost. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
- Jul 10, 2007
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (31 commits) firewire: fw-sbp2: fix DMA mapping of management ORBs firewire: fw-sbp2: fix DMA mapping of command ORBs firewire: fw-sbp2: fix DMA mapping of S/G tables firewire: fw-sbp2: add a boundary check firewire: fw-sbp2: correctly align page tables firewire: fw-sbp2: memset wants string.h firewire: fw-sbp2: use correct speed in sbp2_agent_reset firewire: fw-sbp2: correctly dereference by container_of firewire: Document userspace ioctl interface. firewire: fw-sbp2: implement nonexclusive login firewire: fw-sbp2: let SCSI shutdown commands through before logout firewire: fw-sbp2: implement max sectors limit for some old bridges firewire: simplify a struct type firewire: support S100B...S400B and link slower than PHY firewire: optimize gap count with 1394b leaf nodes firewire: remove unused macro firewire: missing newline in printk firewire: fw-sbp2: remove unused struct member ieee1394: remove old isochronous ABI ieee1394: sbp2: change some module parameters from int to bool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: handle cases of volume knobs generating relative values HID: Logitech keyboard 0xc311 needs reset leds quirk HID: support for logitech cordless desktop LX500 special mapping HID: fix autocentering of PID devices HID: separate quirks for report descriptor fixup HID: Add NOGET quirk for all NCR devices HID: support for Petalynx Maxter remote control HID: fix mismatch between hid-input HUT find/search mapping and the HUT HID: support for Gameron dual psx adaptor USB HID: avoid flush_scheduled_work() HID: Use menuconfig objects HID: force hid-input for Microsoft SideWinder GameVoice device HID: input mapping for Chicony KU-0418 tactical pad HID: make debugging output runtime-configurable
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (75 commits) Ethernet driver for EISA only SNI RM200/RM400 machines Extract chip specific code out of lasi_82596.c ehea: Whitespace cleanup pasemi_mac: Fix TX interrupt threshold spidernet: Replace literal with const r8169: perform RX config change after mac filtering r8169: mac address change support r8169: display some extra debug information during startup r8169: add endianess annotations to [RT]xDesc r8169: align the IP header when there is no DMA constraint r8169: add bit description for the TxPoll register r8169: cleanup r8169: remove the media option r8169: small 8101 comment r8169: confusion between hardware and IP header alignment r8169: merge with version 8.001.00 of Realtek's r8168 driver r8169: merge with version 6.001.00 of Realtek's r8169 driver r8169: prettify mac_version r8169: populate the hw_start handler for the 8110 r8169: populate the hw_start handler for the 8168 ...
-
Stefan Richter authored
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Kristian Høgsberg <krh@redhat.com>
-
Stefan Richter authored
The CPU must not touch the buffer after it was DMA-mapped. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Kristian Høgsberg <krh@redhat.com>
-