Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.

The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register.  For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.

After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this

This is a mix of 2 independent changes: one by me and the other by Matt
Roper.

v2:
  - Reword commit message to make it clearer why we don't call it
    "minor" (Matt Roper and Tvrtko)
  - Rename variables s/*_ver_release/*_rel/ and print them in a single
    line formatted as {ver}.{rel:2} (Jani and Matt Roper)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com

Brevity is not needed here, so just spell out "* version" in the string.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-1-lucas.demarchi@intel.com

The PUNIT FW is currently returning 0 for all memory bandwidth
parameters. Read the values directly from MCHBAR offsets 0x5918 and
0x4000(4).

v2 (Lucas): tidy up checking for ret slightly
v3 (Lucas):
  - Squash change to double the memory bandwidth based on
    MCHBAR Gear_type
  - Move ICL_GEAR_TYPE_MASK to the appropriate place and change prefix
    to DG1
  - Move register definitions to i915_reg.h
  - Make the MCHBAR path permanent for DG1
  - Convert to REG_BIT()/REG_GENMASK()
v4: Drop unneeded initializations

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708175226.2451260-1-lucas.demarchi@intel.com

On XELPD platforms, color management support is not yet enabled.
Fix wrongly reporting the same through platform info, which was
resulting in incorrect initialization and usage.

Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095253.23848-1-uma.shankar@intel.com

The 'has_cdclk_crawl' field in our device info structure is a boolean
flag and doesn't need a whole u8.  Add it as another 1-bit feature flag
and move it to the display section.  While we're at it, replace the
has_cdclk_crawl() function with a macro for consistency with our
handling of other feature flags.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707234206.2002849-1-matthew.d.roper@intel.com


Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Add a small helper to keep intel_plane_helper_funcs static.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518132426.7567-1-jani.nikula@intel.com

Now that all the codebase is converted to the new *VER macros, remove
the old GEN ones.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-4-lucas.demarchi@intel.com

Commit 161058fb

 ("drm/i915: Add remaining conversions to GRAPHICS_VER")
did the last conversions to the new macros for version checks, but left
one instance behind and some other changes sneaked in to use INTEL_GEN.
Remove the last users so we can remove the macros.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-3-lucas.demarchi@intel.com

Earlier HDCP over MST support was added for TGL Platform.
Extending it to all future platfroms.

v2:
- Remove the platform check and commit log changes. [Jani]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705122208.25618-1-anshuman.gupta@intel.com

If we hit the error path here we unconditionally call
i915_gem_stolen_remove_node, even though we only allocate the
compressed_llb on older platforms. Therefore we should first check that
we actually allocated the node before trying to remove it.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/3709
Fixes: 46b2c40e

 ("drm/i915/fbc: Allocate llb before cfb")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701090326.1056452-1-matthew.auld@intel.com

_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.

Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.

That is a regression introduced in the refactor done in
commit 351221ff ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.

BSpec: 50286
Fixes: 351221ff

 ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com

Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

While reading the SDP infoframe, we are getting filtered with
the encoder type INTEL_OUTPUT_DDI which causes the infoframe
mismatch. This patch will drop encoder->type check as we can
mask individual infoframe type.

[1025.606556] i915 0000:00:02.0: [drm] *ERROR* mismatch in drm infoframe
[1025.607865] i915 0000:00:02.0: [drm] *ERROR* expected:
[1025.607879] i915 0000:00:02.0: HDMI infoframe: Dynamic Range and Mastering, version 1, length 26
[1025.607889] i915 0000:00:02.0: length: 26
[1025.607898] i915 0000:00:02.0: metadata type: 0
[1025.608292] i915 0000:00:02.0: eotf: 2
[1025.608302] i915 0000:00:02.0: x[0]: 35400
[1025.608312] i915 0000:00:02.0: y[0]: 14599
[1025.609115] i915 0000:00:02.0: x[1]: 8500
[1025.609947] i915 0000:00:02.0: y[1]: 39850
[1025.609959] i915 0000:00:02.0: x[2]: 6550
[1025.609970] i915 0000:00:02.0: y[2]: 2300
[1025.609980] i915 0000:00:02.0: white point x: 15634
[1025.609989] i915 0000:00:02.0: white point y: 16450
[1025.610381] i915 0000:00:02.0: max_display_mastering_luminance: 1000
[1025.610392] i915 0000:00:02.0: min_display_mastering_luminance: 500
[1025.610401] i915 0000:00:02.0: max_cll: 500
[1025.610816] i915 0000:00:02.0: max_fall: 1000
[1025.612457] i915 0000:00:02.0: [drm] *ERROR* found:
[1025.614354] ------------[ cut here ]------------
[1025.616244] pipe state doesn't match!
[1025.617640] WARNING: CPU: 6 PID: 2114 at drivers/gpu/drm/i915/display/intel_display.c:9332 intel_atomic_commit_tail+0x14d4/0x17c0 [i915]

V2:
* Drop encoder->type check

V3:
* Remove internal reviews

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423141609.28568-1-bhanuprakash.modem@intel.com

Merge tag 'drm-intel-next-fixes-2021-06-29' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-next

The biggest fix is the restoration of mmap ioctl for gen12 integrated parts
which lack was breaking ADL-P with media stack.
Besides that a small selftest fix and a theoretical overflow on
i915->pipe_to_crtc_mapping.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YNtsfguvCRSROBUZ@intel.com

Merge tag 'drm-misc-next-fixes-2021-06-24' of git://anongit.freedesktop.org/drm/drm-misc

 into drm-next

Short summary of fixes pull:

 * amdgpu: Fix test for allocation failures

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YNQxVybBGdjLMUQJ@linux-uq9g

Removing force probe protection from EHL platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html

?

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629104954.927151-1-tejaskumarx.surendrakumar.upadhyay@intel.com

Removing force probe protection from JSL platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html

?

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629105356.927359-1-tejaskumarx.surendrakumar.upadhyay@intel.com

Reinstate the mmap ioctl for all current integrated platforms.
The intention was really to have it disabled for discrete graphics
where we enforce a single mmap mode.

This was reported to break ADL-P with the media stack, which was not the
intention. Although longer term we do still plan to sunset this ioctl
even for integrated, in favour of using mmap_offset instead.

Fixes: 35cbd91e

 ("drm/i915: Disable mmap ioctl for gen12+")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624112914.311984-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit d3f3baa3

)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Add a single point of truth for figuring out the primary/secondary crtc
for bigjoiner instead of duplicating the magic pipe +/- 1 in multiple
places.

Also fix the pipe validity checks to properly take non-contiguous pipes
into account. The current checks may theoretically overflow
i915->pipe_to_crtc_mapping[pipe], albeit with a warning, due to fused
off pipes, as INTEL_NUM_PIPES() returns the actual number of pipes on
the platform, and the check is for INTEL_NUM_PIPES() == pipe + 1.

Prefer primary/secondary terminology going forward.

v2:
- Improved abstractions for pipe validity etc.

Fixes: 8a029c11 ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
Fixes: d961eb20

 ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.dl.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610090528.20511-1-jani.nikula@intel.com
(cherry picked from commit 17203224

)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Since we are already loop through the levels to sanitize them, mark what
is the real max_level so it can be used in subsequent loop. This makes
it simpler to later add the adjustment latency to "valid levels". No
change in behavior, just makes the code easier to follow.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622212210.3746133-2-lucas.demarchi@intel.com

We should no longer increment level 0 by 1usec when we have 16Gb DIMMs.
Instead spec says to add 3usec (as opposed to 2) to each valid level
when punit replies 0 to level 0.

So set wm_lv_0_adjust_needed to false for DISPLAY_VER() >= 12 and set
the proper adjustment value when handling WaWmMemoryReadLatency.

Bspec: 49326, 4381
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622212210.3746133-1-lucas.demarchi@intel.com

PSR2 is not compatible with DC3CO or VRR in this stepping, so not
enabling PSR2 if VRR will be enabled or not enabling DC3CO if PSR2 is
possible.

BSpec: 54369
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-5-jose.souza@intel.com

In some modes there is not enough time during hblank to transmit PSR2
SDP plus the pixels CRC SDP, if such case happens PSR2 needs to be
disabled.
But eDP spec 1.4b allows to transmit PSR2 SDP in a prior scanline
alone and than later the CRC SDP, allowing PSR2 to be enabled in
those hblank constrained modes.

BSpec: 49274
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-4-jose.souza@intel.com

Another WA that is required for PSR2.

BSpec: 54369
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-3-jose.souza@intel.com

The PSR2_CTL io buffer wake and fast wake values do not match
expected in pre production hardware, so here adding a table that
matches with HW to program it with values that HW expect.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-2-jose.souza@intel.com

We were only handling X and width granularity, what was causing issues
when sink had a granularity different than 4.

While at it, renaming su_x_granularity to su_w_granularity to better
match reality.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-1-jose.souza@intel.com

Clear out the straggler 'intel_crtc' variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Sort out the mess with the local variables in
intel_fbdev_init_bios(). Get rid of all aliasing pointers,
use standard naming/types, and introduce a few more locals
in the loops to avoid the hard to read long struct walks.

While at we also polish the debugs a bit to use the
canonical [CRTC:%d:%s] style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-6-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Just pass the full atomic state+crtc to the pre-skl watermark
functions, and clean up the types/variable names around the area.

Note that having both .compute_pipe_wm() and .compute_intermediate_wm()
is entirely redundant now. We could unify them to a single vfunc.
But let's do this one step at a time.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-5-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Sort out the mess with the local variables in
intel_find_initial_plane_obj(). Get rid of all aliasing pointers
and use standard naming/types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-4-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Sort out the mess with the local variables in
intel_get_load_detect_pipe(). Get rid of all aliasing pointers
and use standard naming/types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-3-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Use drm_crtc_mask() instead of hand rolling it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-2-ville.syrjala@linux.intel.com


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Since the llb allocation has a fixed size, let's grab it before
the potentially variable sized cfb. That should avoid some allocation
failure cases once we allow different compression ratios for FBC1.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-10-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Write the cfb allocation loop as an actual loop instead of some
hard to read goto thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-9-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Declutter find_compression_limit() a bit by extracting
intel_fbc_stolen_end().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-8-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Exctract the limit->register value conversion into a common
helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-7-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

The limit++ for the 16bpp case is nonsense since the
compression limit is always supposed to be power of two.
Replace it with <<=1.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-6-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

No point in passing the mm node explicitly to find_compression_limit()
since it's always the same node for the cfb.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-5-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Not much point in dynamically allocating the line length
buffer mm node that I can see. Just embed it directly like
we do the for the cfb node. One less failure point to worry
about.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Extract the CFB (+LLB) programming into a separate function.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-3-ville.syrjala@linux.intel.com


Reviewed-by: José Roberto de Souza <jose.souza@intel.com>