- Jan 26, 2022
-
-
Marc Zyngier authored
A recent bug report outlined that the way GICv4.1 is handled across kexec is pretty bad. We can end-up in a situation where ITSs share memory (this is the case when SVPET==1) and reprogram the base registers, creating a situation where ITSs that are part of a given affinity group see different pointers. Which is illegal. Boo. In order to restore some sanity, reset the BASERn registers to 0 *before* probing any ITS. Although this isn't optimised at all, this is only a once-per-boot cost, which shouldn't show up on anyone's radar. Cc: Jay Chen <jkchen@linux.alibaba.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20211216190315.GA14220@lpieralisi Link: https://lore.kernel.org/r/20220124133809.1291195-1-maz@kernel.org
-
- Jan 22, 2022
-
-
Ard Biesheuvel authored
Commit 835f442f ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") added a reference to cpus_booted_once_mask, which does not exist on !SMP builds, breaking the build for such configurations. Given the intent of the check, short circuit it to always pass. Cc: Valentin Schneider <valentin.schneider@arm.com> Fixes: 835f442f ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220122151614.133766-1-ardb@kernel.org
-
- Jan 17, 2022
-
-
Christophe JAILLET authored
kfree() and bitmap_free() are the same. But using the latter is more consistent when freeing memory allocated with bitmap_zalloc(). Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/0b982ab54844803049c217b2899baa59602faacd.1640529916.git.christophe.jaillet@wanadoo.fr
-
Sander Vanheule authored
Instead of only servicing the lowest pending interrupt line, make sure all pending SoC interrupts are serviced before exiting the chained handler. This adds a small overhead if only one interrupt is pending, but should prevent rapid re-triggering of the handler. Signed-off-by:
Sander Vanheule <sander@svanheule.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
-
Sander Vanheule authored
There is an offset between routing values (1..6) and the connected MIPS CPU interrupts (2..7), but no distinction was made between these two values. This issue was previously hidden during testing, because an interrupt mapping was used where for each required interrupt another (unused) routing was configured, with an offset of +1. Offset the CPU IRQ numbers by -1 to retrieve the correct routing value. Fixes: 9f3a0f34 ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by:
Sander Vanheule <sander@svanheule.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/177b920aa8d8610615692d0e657e509f363c85ca.1641739718.git.sander@svanheule.net
-
Sander Vanheule authored
The driver assigned the irqchip and irq handler to the hardware irq, instead of the virq. This is incorrect, and only worked because these irq numbers happened to be the same on the devices used for testing the original driver. Fixes: 9f3a0f34 ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller") Signed-off-by:
Sander Vanheule <sander@svanheule.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4b4936606480265db47df152f00bc2ed46340599.1641739718.git.sander@svanheule.net
-
Marc Zyngier authored
This field was never used, remove it. Signed-off-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220108140118.3378937-1-maz@kernel.org
-
- Dec 20, 2021
-
-
Marc Zyngier authored
* irq/misc-5.17: : . : Misc irqchip fixes: : : - Disable GICv4.1 RD's VPE table at boot time to avoid RAS errors : - Fix Ingenic TCU's u32/unsigned long abuse : - Some GICv2m constifying : - Mark imx_gpcv2_instance as __ro_after_init : - Enable a few missing IRQs on Spear : - Conversion to platform_get_irq_optional() for the Renesas irqchips : . irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 Signed-off-by:
Marc Zyngier <maz@kernel.org>
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-1-prabhakar.mahadev-lad.rj@bp.renesas.com
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211216182121.5323-2-prabhakar.mahadev-lad.rj@bp.renesas.com
-
- Dec 16, 2021
-
-
Marc Zyngier authored
Jay Chen reported that using a kdump kernel on a GICv4.1 system results in a RAS error being delivered when the secondary kernel configures the ITS's view of the new VPE table. As it turns out, that's because each RD still has a pointer to the previous instance of the VPE table, and that particular implementation is very upset by seeing two bits of the HW that should point to the same table with different values. To solve this, let's invalidate any reference that any RD has to the VPE table when discovering the RDs. The ITS can then be programmed as expected. Reported-by:
Jay Chen <jkchen@linux.alibaba.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20211214064716.21407-1-jkchen@linux.alibaba.com Link: https://lore.kernel.org/r/20211216144804.1578566-1-maz@kernel.org
-
Kees Cook authored
The find.h APIs are designed to be used only on unsigned long arguments. This can technically result in a over-read, but it is harmless in this case. Regardless, fix it to avoid the warning seen under -Warray-bounds, which we'd like to enable globally: In file included from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./include/linux/smp.h:13, from ./include/linux/lockdep.h:14, from ./include/linux/mutex.h:17, from ./include/linux/notifier.h:14, from ./include/linux/clk.h:14, from drivers/irqchip/irq-ingenic-tcu.c:7: drivers/irqchip/irq-ingenic-tcu.c: In function 'ingenic_tcu_intc_cascade': ./include/linux/find.h:40:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'uint32_t[1]' {aka 'unsigned int[1]'} [-Warray-bounds] 40 | val = *addr & GENMASK(size - 1, offset); | ^~~~~ drivers/irqchip/irq-ingenic-tcu.c:30:18: note: while referencing 'irq_reg' 30 | uint32_t irq_reg, irq_mask; | ^~~~~~~ Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215232457.2069969-1-keescook@chromium.org
-
Xiang wangx authored
struct of_device_id should normally be const. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211209132453.25623-1-wangxiang@cdjrlc.com
-
Peng Fan authored
imx_gpcv2_instance will not be updated after init, so mark it with __ro_after_init. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211214084711.1357325-1-peng.fan@oss.nxp.com
-
Herve Codina authored
IRQ 0..7 are not supported by the driver for SPEAr320 SOC family. IRQ 0 is not reserved in SPEAr320 SOC (assigned to GPIOINT). Furthermore, in SPEAr320s SOC variant, IRQ 0..6 are assigned as follow: IRQ 6 - NGPIO_INTR: Combined status of edge programmable interrupts from GPIO ports IRQ 5 - TX_OR_INTR: I2S interrupt on Transmit FIFO overrun IRQ 4 - TX_EMP_INTR: I2S interrupt on Transmit FIFO empty IRQ 3 - RX_OR_INTR: I2S interrupt on Receive FIFO overrun IRQ 2 - RX_DA_INTR: I2S interrupt on data available in Receive FIFO IRQ 1 - Reserved IRQ 0 - GPIO_INTR: Legacy interrupt from GPIO ports Add support for these IRQs in SPEAr320 SOC family. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211202095255.165797-6-herve.codina@bootlin.com
-
Marc Zyngier authored
* irq/its-kexec-rt: : . : Series from Valentin Schneider, aiming at fixing the issues : the ITS driver has with PREEMPT_RT whilst trying to reserve : memory at early boot to support kexec. : . irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve irqchip/gic-v3-its: Give the percpu rdist struct its own flags field Signed-off-by:
Marc Zyngier <maz@kernel.org>
-
Valentin Schneider authored
The new memreserve cpuhp callback only needs to survive up until a point where every CPU in the system has booted once. Beyond that, it becomes a no-op and can be put in the bin. Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-4-valentin.schneider@arm.com
-
Valentin Schneider authored
Memory used by the LPI tables have to be made persistent for kexec to have a chance to work, as explained in [1]. If they have been made persistent and we are booting into a kexec'd kernel, we also need to free the pages that were preemptively allocated by the new kernel for those tables. Both of those operations currently happen during its_cpu_init(), which happens in a _STARTING (IOW atomic) cpuhp callback for secondary CPUs. efi_mem_reserve_iomem() issues a GFP_ATOMIC allocation, which unfortunately doesn't work under PREEMPT_RT (this ends up grabbing a non-raw spinlock, which can sleep under PREEMPT_RT). Similarly, freeing the pages ends up grabbing a sleepable spinlock. Since the memreserve is only required by kexec, it doesn't have to be done so early in the secondary boot process. Issue the reservation in a new CPUHP_AP_ONLINE_DYN cpuhp callback, and piggy-back the page freeing on top of it. A CPU gets to run the body of this new callback exactly once. As kexec issues a machine_shutdown() prior to machine_kexec(), it will be serialized vs a CPU being plugged to life by the hotplug machinery - either the CPU will have been brought up and have had its redistributor's pending table memreserved, or it never went online and will have its table allocated by the new kernel. [1]: https://lore.kernel.org/lkml/20180921195954.21574-1-marc.zyngier@arm.com/ Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-3-valentin.schneider@arm.com
-
Valentin Schneider authored
Later patches will require tracking some per-rdist status. Reuse the bytes "lost" to padding within the __percpu rdist struct as a flags field, and re-encode ->lpi_enabled within said flags. No change in functionality intended. Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211027151506.2085066-2-valentin.schneider@arm.com
-
- Dec 06, 2021
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Some bug and warning fixes: - Fix "make install" to use debians "installkernel" script which is now in /usr/sbin - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name - Fix compiler warnings by annotating parisc agp init functions with __init - Fix timekeeping on SMP machines with dual-core CPUs - Enable some more config options in the 64-bit defconfig" * tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Mark cr16 CPU clocksource unstable on all SMP machines parisc: Fix "make install" on newer debian releases parisc/agp: Annotate parisc agp init functions with __init parisc: Enable sata sil, audit and usb support on 64-bit defconfig parisc: Fix KBUILD_IMAGE for self-extracting kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for a few reported issues. Included in here are: - xhci fix for a _much_ reported regression. I don't think there's a community distro that has not reported this problem yet :( - new USB quirk addition - cdns3 minor fixes - typec regression fix. All of these have been in linux-next with no reported problems, and the xhci fix has been reported by many to resolve their reported problem" * tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub xhci: Fix commad ring abort, write all 64 bits to CRCR register.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve a number of reported problems. They include: - liteuart serial driver fixes - 8250_pci serial driver fixes for pericom devices - 8250 RTS line control fix while in RS-485 mode - tegra serial driver fix - msm_serial driver fix - pl011 serial driver new id - fsl_lpuart revert of broken change - 8250_bcm7271 serial driver fix - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1 - vgacon fix for reported problem All of these, except for the 8250_bcm7271 fix have been in linux-next with no reported problem. The 8250_bcm7271 fix was added to the tree on Friday so no chance to be linux-next yet. But it should be fine as the affected developers submitted it" * tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_bcm7271: UART errors after resuming from S2 serial: 8250_pci: rewrite pericom_do_set_divisor() serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array serial: 8250: Fix RTS modem control while in rs485 mode Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 serial: liteuart: relax compile-test dependencies serial: liteuart: fix minor-number leak on probe errors serial: liteuart: fix use-after-free and memleak on unbind serial: liteuart: Fix NULL pointer dereference in ->remove() vgacon: Propagate console boot parameters before calling `vc_resize' tty: serial: msm_serial: Deactivate RX DMA for polling support serial: pl011: Add ACPI SBSA UART match id serial: core: fix transmit-buffer reset and memleak MAINTAINERS: Add rpmsg tty driver maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full mode runs for prolonged periods with interrupts disabled and ends up programming the next tick in the past, leading to that storm * tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/nohz: Last resort update jiffies on nohz_full IRQ entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Properly init uclamp_flags of a runqueue, on first enqueuing - Fix preempt= callback return values - Correct utime/stime resource usage reporting on nohz_full to return the proper times instead of shorter ones * tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Fix rq->uclamp_max not set on first enqueue preempt/dynamic: Fix setup_preempt_mode() return value sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Fix a couple of SWAPGS fencing issues in the x86 entry code - Use the proper operand types in __{get,put}_user() to prevent truncation in SEV-ES string io - Make sure the kernel mappings are present in trampoline_pgd in order to prevent any potential accesses to unmapped memory after switching to it - Fix a trivial list corruption in objtool's pv_ops validation - Disable the clocksource watchdog for TSC on platforms which claim that the TSC is constant, doesn't stop in sleep states, CPU has TSC adjust and the number of sockets of the platform are max 2, to prevent erroneous markings of the TSC as unstable. - Make sure TSC adjust is always checked not only when going idle - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in the FPU code - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention * tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Add xenpv_restore_regs_and_return_to_usermode() x86/entry: Use the correct fence macro after swapgs in kernel CR3 x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry() x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword x86/64/mm: Map all kernel memory into trampoline_pgd objtool: Fix pv_ops noinstr validation x86/tsc: Disable clocksource watchdog for TSC on qualified platorms x86/tsc: Add a timer to make sure TSC_adjust is always checked x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog() x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more kvm fixes from Paolo Bonzini: - Static analysis fix - New SEV-ES protocol for communicating invalid VMGEXIT requests - Ensure APICv is considered inactive if there is no APIC - Fix reserved bits for AMD PerfEvtSeln register * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails KVM: x86/mmu: Retry page fault if root is invalidated by memslot update KVM: VMX: Set failure code in prepare_vmcs02() KVM: ensure APICv is considered inactive if there is no APIC KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
-
- Dec 05, 2021
-
-
Tom Lendacky authored
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT exit code or exit parameters fails. The VMGEXIT instruction can be issued from userspace, even though userspace (likely) can't update the GHCB. To prevent userspace from being able to kill the guest, return an error through the GHCB when validation fails rather than terminating the guest. For cases where the GHCB can't be updated (e.g. the GHCB can't be mapped, etc.), just return back to the guest. The new error codes are documented in the lasest update to the GHCB specification. Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so that KVM falls back to __vmalloc() if physically contiguous memory isn't available. The buffer is purely a KVM software construct, i.e. there's no need for it to be physically contiguous. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211109222350.2266045-3-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Return appropriate error codes if setting up the GHCB scratch area for an SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM when allocating the kernel buffer could be confusing as userspace would likely suspect a guest issue. Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211109222350.2266045-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Remove an unnecessary (and backwards) rename flags check that duplicates a VFS level check" * tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove incorrect ASSERT in xfs_rename
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three SMB3 multichannel/fscache fixes and a DFS fix. In testing multichannel reconnect scenarios recently various problems with the cifs.ko implementation of fscache were found (e.g. incorrect initialization of fscache cookies in some cases)" * tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: avoid use of dstaddr as key for fscache client cookie cifs: add server conn_id to fscache client cookie cifs: wait for tcon resource_id before getting fscache super cifs: fix missed refcounting of ipc tcon
-
Helge Deller authored
In commit c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources") I assumed that CPUs on the same physical core are syncronous. While booting up the kernel on two different C8000 machines, one with a dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be wrong. The symptom was that I saw a jump in the internal clocks printed to the syslog and strange overall behaviour. On machines which have 4 cores (2 dual-cores) the problem isn't visible, because the current logic already marked the cr16 clocksource unstable in this case. This patch now marks the cr16 interval timers unstable if we have more than one CPU in the system, and it fixes this issue. Fixes: c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources") Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.15+
-
Helge Deller authored
On newer debian releases the debian-provided "installkernel" script is installed in /usr/sbin. Fix the kernel install.sh script to look for the script in this directory as well. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.13+
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "A single fix for repeated printk spam from loop" * tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block: loop: Use pr_warn_once() for loop_control_remove() warning
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Just a single fix preventing repeated retries of task_work based io-wq thread creation, fixing a regression from when io-wq was made more (a bit too much) resilient against signals" * tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block: io-wq: don't retry task_work creation failure on fatal conditions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two patches, both in drivers. One is a fix to FC recovery (lpfc) and the other is an enhancement to support the Intel Alder Motherboard with the UFS driver which comes under the -rc exception process for hardware enabling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufs-pci: Add support for Intel ADL scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: - Since commit 486408d6 ("gfs2: Cancel remote delete work asynchronously"), inode create and lookup-by-number can overlap more easily and we can end up with temporary duplicate inodes. Fix the code to prevent that. - Fix a BUG demoting weak glock holders from a remote node. * tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_create_inode rework gfs2: gfs2_inode_lookup rework gfs2: gfs2_inode_lookup cleanup gfs2: Fix remote demote of weak glock holders
-
- Dec 04, 2021
-
-
Qais Yousef authored
Commit d81ae8aa ("sched/uclamp: Fix initialization of struct uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to match the woken up task's uclamp_max when the rq is idle. The code was relying on rq->uclamp_max initialized to zero, so on first enqueue static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p, enum uclamp_id clamp_id) { ... if (uc_se->value > READ_ONCE(uc_rq->value)) WRITE_ONCE(uc_rq->value, uc_se->value); } was actually resetting it. But since commit d81ae8aa changed the default to 1024, this no longer works. And since rq->uclamp_flags is also initialized to 0, neither above code path nor uclamp_idle_reset() update the rq->uclamp_max on first wake up from idle. This is only visible from first wake up(s) until the first dequeue to idle after enabling the static key. And it only matters if the uclamp_max of this task is < 1024 since only then its uclamp_max will be effectively ignored. Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to ensure uclamp_idle_reset() is called which then will update the rq uclamp_max value as expected. Fixes: d81ae8aa ("sched/uclamp: Fix initialization of struct uclamp_rq") Signed-off-by:
Qais Yousef <qais.yousef@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <Valentin.Schneider@arm.com> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
-
Andrew Halaney authored
__setup() callbacks expect 1 for success and 0 for failure. Correct the usage here to reflect that. Fixes: 826bfeb3 ("preempt/dynamic: Support dynamic preempt with preempt= boot option") Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
-