- Oct 24, 2020
-
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull clone/dedupe/remap code refactoring from Darrick Wong: "Move the generic file range remap (aka reflink and dedupe) functions out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to reduce clutter in the first two files" * tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: move the generic write and copy checks out of mm vfs: move the remap range helpers to remap_range.c vfs: move generic_remap_checks out of mm
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: "vhost, vdpa, and virtio cleanups and fixes A very quiet cycle, no new features" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: add URL for virtio-mem vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call vringh: fix __vringh_iov() when riov and wiov are different vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK s390: virtio: PV needs VIRTIO I/O device protection virtio: let arch advertise guest's memory access restrictions vhost_vdpa: Fix duplicate included kernel.h vhost: reduce stack usage in log_used virtio-mem: Constify mem_id_table virtio_input: Constify id_table virtio-balloon: Constify id_table vdpa/mlx5: Fix failure to bring link up vdpa/mlx5: Make use of a specific 16 bit endianness API
-
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fix from Vineet Gupta: "I found a snafu in perf driver which made it into 5.9-rc4 and the fix should go in now than wait" * tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: redo the pct irq missing in device-tree handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 updates from Will Deacon: "A small selection of further arm64 fixes and updates. Most of these are fixes that came in during the merge window, with the exception of the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018 and somehow forgot to enable upstream. - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if you're lucky enough to have one) - Select HAVE_MOVE_PMD. This has been shown to improve mremap() performance, which is used heavily by the Android runtime GC, and it seems we forgot to enable this upstream back in 2018. - Ensure linker flags are consistent between LLVM and BFD - Fix stale comment in Spectre mitigation rework - Fix broken copyright header - Fix KASLR randomisation of the linear map - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)" Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/ * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: proton-pack: Update comment to reflect new function name arm64: spectre-v2: Favour CPU-specific mitigation at EL2 arm64: link with -z norelro regardless of CONFIG_RELOCATABLE arm64: Fix a broken copyright header in gen_vdso_offsets.sh arm64: mremap speedup - Enable HAVE_MOVE_PMD arm64: mm: use single quantity to represent the PA to VA translation arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
-
- Oct 23, 2020
-
-
Ben Gardon authored
When KVM maps a largepage backed region at a lower level in order to make it executable (i.e. NX large page shattering), it reduces the TLB performance of that region. In order to avoid making this degradation permanent, KVM must periodically reclaim shattered NX largepages by zapping them and allowing them to be rebuilt in the page fault handler. With this patch, the TDP MMU does not respect KVM's rate limiting on reclaim. It traverses the entire TDP structure every time. This will be addressed in a future patch. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Direct roots don't have a write flooding count because the guest can't affect that paging structure. Thus there's no need to clear the write flooding count on a fast CR3 switch for direct roots. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-20-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
In order to support MMIO, KVM must be able to walk the TDP paging structures to find mappings for a given GFN. Support this walk for the TDP MMU. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 v2: Thanks to Dan Carpenter and kernel test robot for finding that root was used uninitialized in get_mmio_spte. Signed-off-by:
Ben Gardon <bgardon@google.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20201014182700.2888246-19-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
To support nested virtualization, KVM will sometimes need to write protect pages which are part of a shadowed paging structure or are not writable in the shadowed paging structure. Add a function to write protect GFN mappings for this purpose. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-18-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Dirty logging ultimately breaks down MMU mappings to 4k granularity. When dirty logging is no longer needed, these granaular mappings represent a useless performance penalty. When dirty logging is disabled, search the paging structure for mappings that could be re-constituted into a large page mapping. Zap those mappings so that they can be faulted in again at a higher mapping level. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-17-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Dirty logging is a key feature of the KVM MMU and must be supported by the TDP MMU. Add support for both the write protection and PML dirty logging modes. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-16-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add a hook and handle the change_pte MMU notifier. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-15-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. The main Linux MM uses the access tracking MMU notifiers for swap and other features. Add hooks to handle the test/flush HVA (range) family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-14-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add hooks to handle the invalidate range family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-13-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Attach struct kvm_mmu_pages to every page in the TDP MMU to track metadata, facilitate NX reclaim, and enable inproved parallelism of MMU operations in future patches. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-12-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
Add functions to handle page faults in the TDP MMU. These page faults are currently handled in much the same way as the x86 shadow paging based MMU, however the ordering of some operations is slightly different. Future patches will add eager NX splitting, a fast page fault handler, and parallel page faults. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-11-bgardon@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kconfig updates from Masahiro Yamada: - Remove unused or useless code from qconf - Allow to edit "int", "hex", "string" options in place, and remove the separate edit box from qconf * tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: create QApplication after option checks kconfig: qconf: remove Y, M, N columns kconfig: qconf: remove ConfigView class kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView kconfig: qconf: remove ConfigLineEdit class kconfig: qconf: allow to edit "int", "hex", "string" menus in-place kconfig: qconf: show data column all the time kconfig: qconf: move ConfigView::updateList(All) to ConfigList class kconfig: qconf: remove unused ConfigItem::okRename() kconfig: qconf: update the intro message to match to the current code kconfig: qconf: reformat the intro message
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules updates from Jessica Yu: "Code cleanups: more informative error messages and statically initialize init_free_wq to avoid a workqueue warning" * tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: statically initialize init section freeing data module: Add more error message for failed kernel module loading
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - New fsl-mc vfio bus driver supporting userspace drivers of objects within NXP's DPAA2 architecture (Diana Craciun) - Support for exposing zPCI information on s390 (Matthew Rosato) - Fixes for "detached" VFs on s390 (Matthew Rosato) - Fixes for pin-pages and dma-rw accesses (Yan Zhao) - Cleanups and optimize vconfig regen (Zenghui Yu) - Fix duplicate irq-bypass token registration (Alex Williamson) * tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits) vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages vfio/pci: Clear token on bypass registration failure vfio/fsl-mc: fix the return of the uninitialized variable ret vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit MAINTAINERS: Add entry for s390 vfio-pci vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO vfio/fsl-mc: Add support for device reset vfio/fsl-mc: Add read/write support for fsl-mc devices vfio/fsl-mc: trigger an interrupt via eventfd vfio/fsl-mc: Add irq infrastructure for fsl-mc devices vfio/fsl-mc: Added lock support in preparation for interrupt handling vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO s390/pci: track whether util_str is valid in the zpci_dev s390/pci: stash version in the zpci_dev vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This introduces rpmsg_char support for GLINK and fixes a few issues" * tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: glink: Expose rpmsg name attr for glink rpmsg: glink: Add support for rpmsg glink chrdev rpmsg: Guard against null endpoint ops in destroy rpmsg: glink: Use complete_all for open states rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description rpmsg: Avoid double-free in mtk_rpmsg_register_device rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
-
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces support for the Mediatek MT9182 SCP and controlling the Cortex R5F processors found in TI K3 platforms. It clones the longstanding debugfs interface for controlling crash handling to sysfs. Lastly it solves a bug where after a warm reset of Qualcomm platforms the modem would crash upon first boot" * tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc/mediatek: Remove non-standard dsb() remoteproc: Add recovery configuration to the sysfs interface remoteproc: Add coredump as part of sysfs interface remoteproc: Change default dump configuration to "disabled" remoteproc: k3-r5: Add loading support for on-chip SRAM regions remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc/mediatek: Add support for mt8192 SCP remoteproc: Fixup coredump debugfs disable request remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot remoteproc/mediatek: fix null pointer dereference on null scp pointer remoteproc: stm32: Fix pointer assignement remoteproc: scp: add COMPILE_TEST dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block foun...
-
Linus Torvalds authored
Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This release cycle's updates are mostly cleanup and some minor fixes" * tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support pwm: Allow store 64-bit duty cycle from sysfs interface pwm: img: Fix null pointer access in probe pwm: pca9685: Disable unused alternative addresses pwm: pca9685: Use BIT() macro instead of shift pwm: pca9685: Make comments more consistent pwm: sun4i: Simplify with dev_err_probe() pwm: sprd: Simplify with dev_err_probe() pwm: sifive: Simplify with dev_err_probe() pwm: rockchip: Simplify with dev_err_probe() pwm: jz4740: Simplify with dev_err_probe() pwm: bcm2835: Simplify with dev_err_probe() pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro pwm: rockchip: Keep enabled PWMs running while probing dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an AC...
-
Vineet Gupta authored
commit feb92d7d "(ARC: perf: don't bail setup if pct irq missing in device-tree)" introduced a silly brown-paper bag bug: The assignment and comparison in an if statement were not bracketed correctly leaving the order of evaluation undefined. | | if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | ^^^ ^^^^ And given such a chance, the compiler will bite you hard, fully entitled to generating this piece of beauty: | | # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) { | | bl.d @platform_get_irq <-- irq returned in r0 | | setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false | brlt.d r0, 0, @.L114 | | st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val | st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1 | | # return __request_percpu_irq(irq, handler, 0, | | bl.d @__request_percpu_irq; | mov_s r0,1 <-- drops even bool and assumes 1 which fails With the snafu fixed, everything is as expected. | bl.d @platform_get_irq <-- returns irq in r0 | | mov_s r2,r0 | brlt.d r2, 0, @.L112 | | st_s r0,[sp] <-- irq isaved is actual return value above | st r0,[r13,160] #arc_pmu.18_27->irq | | bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned | add r4,r4,r12 #, tmp363, __ptr Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "The siginificant new ext4 feature this time around is Harshad's new fast_commit mode. In addition, thanks to Mauricio for fixing a race where mmap'ed pages that are being changed in parallel with a data=journal transaction commit could result in bad checksums in the failure that could cause journal replays to fail. Also notable is Ritesh's buffered write optimization which can result in significant improvements on parallel write workloads. (The kernel test robot reported a 330.6% improvement on fio.write_iops on a 96 core system using DAX) Besides that, we have the usual miscellaneous cleanups and bug fixes" Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: fix invalid inode checksum ext4: add fast commit stats in procfs ext4: add a mount opt to forcefully turn fast commits on ext4: fast commit recovery path jbd2: fast commit recovery path ext4: main fast-commit commit path jbd2: add fast commit machinery ext4 / jbd2: add fast commit initialization ext4: add fast_commit feature and handling for extended mount options doc: update ext4 and journalling docs to include fast commit feature ext4: Detect already used quota file early jbd2: avoid transaction reuse after reformatting ext4: use the normal helper to get the actual inode ext4: fix bs < ps issue reported with dioread_nolock mount opt ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() ext4: data=journal: fixes for ext4_page_mkwrite() jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers() jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable() ext4: use ext4_sb_bread() instead of sb_bread() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "The one new feature this time, from Anna Schumaker, is READ_PLUS, which has the same arguments as READ but allows the server to return an array of data and hole extents. Otherwise it's a lot of cleanup and bugfixes" * tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits) NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy SUNRPC: fix copying of multiple pages in gss_read_proxy_verf() sunrpc: raise kernel RPC channel buffer size svcrdma: fix bounce buffers for unaligned offsets and multiple pages nfsd: remove unneeded break net/sunrpc: Fix return value for sysctl sunrpc.transports NFSD: Encode a full READ_PLUS reply NFSD: Return both a hole and a data segment NFSD: Add READ_PLUS hole segment encoding NFSD: Add READ_PLUS data support NFSD: Hoist status code encoding into XDR encoder functions NFSD: Map nfserr_wrongsec outside of nfsd_dispatch NFSD: Remove the RETURN_STATUS() macro NFSD: Call NFSv2 encoders on error returns NFSD: Fix .pc_release method for NFSv2 NFSD: Remove vestigial typedefs NFSD: Refactor nfsd_dispatch() error paths NFSD: Clean up nfsd_dispatch() variables NFSD: Clean up stale comments in nfsd_dispatch() NFSD: Clean up switch statement in nfsd_dispatch() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat updates from Namjae Jeon: - Replace memcpy with structure assignment - Remove unneeded codes and use helper function i_blocksize() - Fix typos found by codespell * tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: remove useless check in exfat_move_file() exfat: remove 'rwoffset' in exfat_inode_info exfat: replace memcpy with structure assignment exfat: remove useless directory scan in exfat_add_entry() exfat: eliminate dead code in exfat_find() exfat: use i_blocksize() to get blocksize exfat: fix misspellings using codespell tool
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "A couple of small fixes (loff_t overflow on 32bit, syzbot uninitialized variable warning) and code cleanup (xen)" * tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux: net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid 9p/xen: Fix format argument warning 9P: Cast to loff_t before multiplying
-
- Oct 22, 2020
-
-
Luo Meng authored
During the stability test, there are some errors: ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid. If the inode->i_iblocks too big and doesn't set huge file flag, checksum will not be recalculated when update the inode information to it's buffer. If other inode marks the buffer dirty, then the inconsistent inode will be flushed to disk. Fix this problem by checking i_blocks in advance. Cc: stable@kernel.org Signed-off-by:
Luo Meng <luomeng12@huawei.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This commit adds a file in procfs that tracks fast commit related statistics. root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info fc stats: 7772 commits 15 ineligible 4083 numblks 2242us avg_commit_time Ineligible reasons: "Extended attributes changed": 0 "Cross rename": 0 "Journal flag changed": 0 "Insufficient memory": 0 "Swap boot": 0 "Resize": 0 "Dir renamed": 0 "Falloc range op": 0 "FC Commit Failed": 15 Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This is a debug only mount option that forcefully turns fast commits on at mount time. Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-9-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This patch adds fast commit recovery path support for Ext4 file system. We add several helper functions that are similar in spirit to e2fsprogs journal recovery path handlers. Example of such functions include - a simple block allocator, idempotent block bitmap update function etc. Using these routines and the fast commit log in the fast commit area, the recovery path (ext4_fc_replay()) performs fast commit log recovery. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This patch adds fast commit recovery support in JBD2. Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This patch adds main fast commit commit path handlers. The overall patch can be divided into two inter-related parts: (A) Metadata updates tracking This part consists of helper functions to track changes that need to be committed during a commit operation. These updates are maintained by Ext4 in different in-memory queues. Following are the APIs and their short description that are implemented in this patch: - ext4_fc_track_link/unlink/creat() - Track unlink. link and creat operations - ext4_fc_track_range() - Track changed logical block offsets inodes - ext4_fc_track_inode() - Track inodes - ext4_fc_mark_ineligible() - Mark file system fast commit ineligible() - ext4_fc_start_update() / ext4_fc_stop_update() / ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These functions are useful for co-ordinating inode updates with commits. (B) Main commit Path This part consists of functions to convert updates tracked in in-memory data structures into on-disk commits. Function ext4_fc_commit() is the main entry point to commit path. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Harshad Shirwadkar authored
This functions adds necessary APIs needed in JBD2 layer for fast commits. Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-