Pull more RISC-V updates from Palmer Dabbelt:

 - Some cleanups and fixes for the Zbb-optimized string routines

 - Support for custom (vendor or implementation defined) perf events

 - COMMAND_LINE_SIZE has been increased to 1024

* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Bump COMMAND_LINE_SIZE value to 1024
  drivers/perf: RISC-V: Allow programming custom firmware events
  riscv, lib: Fix Zbb strncmp
  RISC-V: improve string-function assembly

Pull RTC updates from Alexandre Belloni:
 "A few drivers got some nice cleanups and a new driver are making the
  bulk of the changes.

  Subsystem:
   - allow rtc_read_alarm without read_alarm callback

  New driver:
   - NXP BBNSM module RTC

  Drivers:
   - use IRQ flags from fwnode when available
   - abx80x: nvmem support
   - brcmstb-waketimer: add non-wake alarm support
   - ingenic: provide CLK32K clock
   - isl12022: cleanups
   - moxart: switch to using gpiod API
   - pcf85363: allow setting quartz load
   - pm8xxx: cleanups and support for setting time
   - rv3028, rv3032: add ACPI support"

* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
  rtc: pm8xxx: add support for nvmem offset
  dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
  rtc: abx80x: Add nvmem support
  rtc: rx6110: Remove unused of_gpio,h
  rtc: efi: Avoid spamming the log on RTC read failure
  rtc: isl12022: sort header inclusion alphabetically
  rtc: isl12022: Join string literals back
  rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
  rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
  rtc: isl12022: Get rid of unneeded private struct isl12022
  rtc: pcf85363: add support for the quartz-load-femtofarads property
  dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
  rtc: allow rtc_read_alarm without read_alarm callback
  rtc: rv3032: add ACPI support
  rtc: rv3028: add ACPI support
  rtc: bbnsm: Add the bbnsm rtc support
  rtc: jz4740: Register clock provider for the CLK32K pin
  rtc: jz4740: Use dev_err_probe()
  rtc: jz4740: Use readl_poll_timeout
  dt-bindings: rtc: Add #clock-cells property
  ...

Pull drm fixes from Dave Airlie:
 "fbdev:
   - fix uninit var in error path

  shmem:
   - revert unGPLing an export

  i915:
   - Don't use stolen memory or BAR mappings for ring buffers with LLC
   - Add inverted backlight quirk for HP 14-r206nv
   - Fix GSI offset for MCR lookups
   - GVT fixes (memleak, debugfs attributes, kconfig, typos)

  amdgpu:
   - SMU 13 fixes
   - Enable TMZ for GC 10.3.6
   - Misc display fixes
   - Buddy allocator fixes
   - GC 11 fixes
   - S0ix fix
   - INFO IOCTL queries for GC 11
   - VCN harvest fixes for SR-IOV
   - UMC 8.10 RAS fixes
   - Don't restrict bpc to 8
   - NBIO 7.5 fix
   - Allow freesync on PCon for more devices

  amdkfd:
   - SDMA fix
   - Illegal memory access fix"

* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
  drm/amdgpu/vcn: fix compilation issue with legacy gcc
  drm/amd/display: Extend Freesync over PCon support for more devices
  Revert "drm/amd/display: Do not set DRR on pipe commit"
  drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
  drm/amd/display: Ext displays with dock can't recognized after resume
  drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
  drm/amdgpu: remove unused variable ring
  drm/amd/display: fix dm irq error message in gpu recover
  drm/amd: Fix initialization for nbio 7.5.1
  drm/amd/display: Don't restrict bpc to 8 bpc
  drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
  drm/radeon: Fix eDP for single-display iMac11,2
  drm/shmem-helper: Revert accidental non-GPL export
  drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
  drm/amd/pm: downgrade log level upon SMU IF version mismatch
  drm/amdgpu: Add ecc info query interface for umc v8_10
  drm/amdgpu: Add convert_error_address function for umc v8_10
  drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
  drm/amdgpu: change default behavior of bad_page_threshold parameter
  drm/amdgpu: exclude duplicate pages from UMC RAS UE count
  ...

Pull arm64 fixes from Catalin Marinas:

 - In copy_highpage(), only reset the tag of the destination pointer if
   KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
   with KASAN_SW_TAGS (which relies on top-byte-ignore).

 - Remove warning if SME is detected without SVE, the kernel can cope
   with such configuration (though none in the field currently).

 - In cfi_handler(), pass the ESR_EL1 value to die() for consistency
   with other die() callers.

 - Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
   manipulation from the generic vmemmap_remap_pte() does not follow the
   required ARM break-before-make sequence (clear the pte, flush the
   TLBs, set the new pte). It may be re-enabled once this sequence is
   sorted.

 - Fix possible memory leak in the arm64 ACPI code if the SMCCC version
   and conduit checks fail.

 - Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
  -falign-functions=N with -Os.

 - Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
   randomisation would actually take place.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
  arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
  arm64: acpi: Fix possible memory leak of ffh_ctxt
  arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  arm64: pass ESR_ELx to die() of cfi_handler
  arm64/fpsimd: Remove warning for SME without SVE
  arm64: Reset KASAN tag in copy_highpage with HW tags only

Merge tag 'amd-drm-fixes-6.3-2023-03-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.3-2023-03-02:

amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices

amdkfd:
- SDMA fix
- Illegal memory access fix

radeon:
- Display fix for iMac11,2

UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403



Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-02-27' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-next

drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com

Merge tag 'drm-misc-next-fixes-2023-02-28' of git://anongit.freedesktop.org/drm/drm-misc

 into drm-next

Short summary of fixes pull:

Fixes uninitialized variables in fbdev error paths and reverts an
SHMEM-helper symbol back to being exported as GPL.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g

Pull watchdog updates from Wim Van Sebroeck:

 - qcom-wdt dt-bindings improvements and additions (like MSM8994 and
   MDM9615)

 - mtk_wdt: Add reset_by_toprgu support

 - devm_clk_get_enabled() helper changes

 - Fix kmemleak in watchdog_cdev_register

 - watchdog sysfs improvements

 - Other fixes and small improvements

* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
  watchdog: at91rm9200: Only warn once about problems in .remove()
  watchdog: mt7621-wdt: avoid ralink architecture dependent code
  watchdog: mt7621-wdt: avoid static global declarations
  dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
  watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
  dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
  watchdog: report options in sysfs
  watchdog: report fw_version in sysfs
  dt-bindings: watchdog: fsl-imx: document suspend in wait mode
  watchdog: imx2_wdg: suspend watchdog in WAIT mode
  watchdog: pcwd_usb: Fix attempting to access uninitialized memory
  dt-bindings: watchdog: qcom-wdt: merge MSM timer
  dt-bindings: watchdog: qcom-wdt: allow interrupts
  dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
  dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
  dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
  dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
  watchdog: Fix kmemleak in watchdog_cdev_register
  watchdog: Include <linux/kstrtox.h> when appropriate
  watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
  ...

Pull ceph fixes from Ilya Dryomov:
 "Two small fixes from Xiubo and myself, marked for stable"

* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
  rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
  ceph: update the time stamps and try to drop the suid/sgid

Pull more MIPS updates from Thomas Bogendoerfer:
 "A few more cleanups and fixes"

* tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Workaround clang inline compat branch issue
  mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
  mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'
  mips: ralink: make SOC_MT7621 select PINCTRL
  mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
  MIPS: cevt-r4k: Offset the value used to clear compare interrupt
  MIPS: smp-cps: Don't rely on CP0_CMGCRBASE
  MIPS: Remove DMA_PERDEV_COHERENT

Pull objtool updates from Ingo Molnar:

 - Shrink 'struct instruction', to improve objtool performance & memory
   footprint

 - Other maximum memory usage reductions - this makes the build both
   faster, and fixes kernel build OOM failures on allyesconfig and
   similar configs when they try to build the final (large) vmlinux.o

 - Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
   single-byte instruction (PUSH/POP or LEAVE). This requires the
   extension of the ORC metadata structure with a 'signal' field

 - Misc fixes & cleanups

* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  objtool: Fix ORC 'signal' propagation
  objtool: Remove instruction::list
  x86: Fix FILL_RETURN_BUFFER
  objtool: Fix overlapping alternatives
  objtool: Union instruction::{call_dest,jump_table}
  objtool: Remove instruction::reloc
  objtool: Shrink instruction::{type,visited}
  objtool: Make instruction::alts a single-linked list
  objtool: Make instruction::stack_ops a single-linked list
  objtool: Change arch_decode_instruction() signature
  x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
  x86/unwind/orc: Add 'signal' field to ORC metadata
  objtool: Optimize layout of struct special_alt
  objtool: Optimize layout of struct symbol
  objtool: Allocate multiple structures with calloc()
  objtool: Make struct check_options static
  objtool: Make struct entries[] static and const
  objtool: Fix HOSTCC flag usage
  objtool: Properly support make V=1
  objtool: Install libsubcmd in build
  ...

Pull auxdisplay fix from Miguel Ojeda:

  - hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie)

* tag 'auxdisplay-6.3' of https://github.com/ojeda/linux:
  auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()

Merge tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is another small set of driver core patches.

  They resolve some reported problems with the previous driver core
  patches that are in your tree.

  They solve a problem with the bus_type cleanup as reported and fixed
  by Geert, and two fw_devlink changes to make debugging problems
  easier.

  There is one known outstanding problem with the fw_deflink changes in
  your tree that is still being worked on, and it looks like a clk core
  change will be submitted soon for that, probably after 6.3-rc1.

  All three of these have been in linux-next with no reported problems
  (only reports that they fixed problems)"

* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: fw_devlink: Print full path and name of fwnode
  driver core: fw_devlink: Avoid spurious error message
  driver core: bus: Handle early calls to bus_to_subsys()

Pull spi fixes from Mark Brown:
 "A small set of fixes for SPI drivers, Krishna has been doing a bunch
  of work on Tegra210 QuadSPI and found a bunch of issues there and
  there's a couple of small fixes for other drivers too"

* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra210-quad: Fix iterator outside loop
  spi: tegra210-quad: Fix validate combined sequence
  spi: tegra210-quad: set half duplex flag
  spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
  spi: cadence-quadspi: Fix cancel the indirect read mask

Pull regulator fixes from Mark Brown:
 "Two fixes here, one driver fix for incorrect error codes and a fix in
  the core to use ktime_get_boottime() in order to fix accounting of the
  time regulators have been powered down over suspend. ktime_get()
  pauses over suspend which is not what we want"

* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
  regulator: max597x: Fix error return code in max597x_get_status

The single difference between returning 0 and returning an error code in
a platform remove callback is that in the latter case the platform core
emits a warning about the error being ignored.

at91wdt_remove() already emits a warning in the error case, so suppress
the more generic (and less helpful) one by returning 0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.de


Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

MT7621 SoC has a system controller node. Watchdog need to access to reset
status register. Ralink architecture and related driver are old and from
the beggining they are using some architecture dependent operations for
accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
header file. However this is not ideal from a driver perspective which can
just access to the system controller registers in an arch independent way
using regmap syscon APIs. Update Kconfig accordingly to select new added
dependencies and allow driver to be compile tested.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the
code.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com


[groeck: unsigned -> unsigned int]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

MT7621 SoC provides a system controller node for accessing to some registers.
Add a phandle in this node to avoid using MIPS related arch operations and
includes in watchdog driver code.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
	for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {

Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.

[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 4f1b5e73.

[Why & How]
Original change causes a regression. Revert
until fix is available.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:

  shift exponent 4294966273 is too large for 32-bit type 'int'

[HOW]

In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Needs to set the default value of the LTTPR timeout after resume.

[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.

[  489.885525] Call Trace:
[  489.885525]  <TASK>
[  489.885526]  amdttm_bo_put+0x34/0x50 [amdttm]
[  489.885529]  amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[  489.885620]  psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[  489.885720]  psp_hw_fini+0xce/0x170 [amdgpu]
[  489.885815]  amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[  489.885960]  ? blocking_notifier_chain_unregister+0x56/0xb0
[  489.885962]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[  489.886049]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[  489.886132]  ? __pm_runtime_resume+0x60/0x90
[  489.886134]  pci_device_remove+0x3e/0xb0
[  489.886135]  __device_release_driver+0x1ab/0x2a0
[  489.886137]  driver_detach+0xf3/0x140
[  489.886138]  bus_remove_driver+0x6c/0xf0
[  489.886140]  driver_unregister+0x31/0x60
[  489.886141]  pci_unregister_driver+0x40/0x90
[  489.886142]  amdgpu_exit+0x15/0x451 [amdgpu]

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
  ‘ring’ set but not used [-Werror=unused-but-set-variable]
   81 |         struct amdgpu_ring *ring;
      |                             ^~~~

ring is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.

  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3

[How]
Defer the initialization of num_types to eliminate the error logs.

Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.

Ensure that they're set during initialization.

Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

This will let us pass the kms_hdr.bpc_switch IGT
test.

The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.

Starting with this patch the issue is fixed:
commit cbd14ae7 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")

This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.

v2:
 - explain why this is no longer needed (Michel)
 - refer to commit that fixed bpc fallback (Michel)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load.  This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.

Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.

This patch is an extension of
commit 564d8a2c ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/


Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.

There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports.  That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull nfsd fix from Chuck Lever:

 - Make new GSS Kerberos Kunit tests work on non-x86 platforms

* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Properly terminate test case arrays
  SUNRPC: Let Kunit tests run with some enctypes compiled out

The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.

On 32-bit arm, do_div() causes a compile-time warning here:

    include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
      238 |   __rem = __div64_32(&(n), __base); \
          |                      ^~~~
          |                      |
          |                      unsigned int *
    drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
     1130 |    do_div(battmgr->status.percent, 100);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words.  It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.

That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more.  And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation.  It's a lose-lose
situation.

So just change the 'u32[2]' into a 'u64' and be done with it.

We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).

So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.

This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently.  By just using a saner data structure, it went from

	unsigned __capi;
	CAP_FOR_EACH_U32(__capi) {
		if (a.cap[__capi] != b.cap[__capi])
			return false;
	}
	return true;

to just being

	return a.val == b.val;

instead.  Which is rather more obvious both to humans and to compilers.

Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sh updates from John Paul Adrian Glaubitz:

 - regression fix in connection with the rtl8169 driver on SuperH boards
   that was introduced when the driver was switched to use
   devm_clk_get_optional_enabled() to simplify the code (Geert
   Uytterhoeven)

 - build warning fix to allow the kernel to be built with CONFIG_WERROR
   enabled (Michael Karcher)

* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: clk: Fix clk_enable() to return 0 on NULL clk
  sh: intc: Avoid spurious sizeof-pointer-div warning

Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Make -mstrict-align configurable

 - Add kernel relocation and KASLR support

 - Add single kernel image implementation for kdump

 - Add hardware breakpoints/watchpoints support

 - Add kprobes/kretprobes/kprobes_on_ftrace support

 - Add LoongArch support for some selftests.

* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
  selftests/ftrace: Add LoongArch kprobe args string tests support
  selftests/seccomp: Add LoongArch selftesting support
  tools: Add LoongArch build infrastructure
  samples/kprobes: Add LoongArch support
  LoongArch: Mark some assembler symbols as non-kprobe-able
  LoongArch: Add kprobes on ftrace support
  LoongArch: Add kretprobes support
  LoongArch: Add kprobes support
  LoongArch: Simulate branch and PC* instructions
  LoongArch: ptrace: Add hardware single step support
  LoongArch: ptrace: Add function argument access API
  LoongArch: ptrace: Expose hardware breakpoints to debuggers
  LoongArch: Add hardware breakpoints/watchpoints support
  LoongArch: kdump: Add crashkernel=YM handling
  LoongArch: kdump: Add single kernel image implementation
  LoongArch: Add support for kernel address space layout randomization (KASLR)
  LoongArch: Add support for kernel relocation
  LoongArch: Add la_abs macro implementation
  LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
  LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
  ...

Pull UML updates from Richard Weinberger:

 - Add support for rust (yay!)

 - Add support for LTO

 - Add platform bus support to virtio-pci

 - Various virtio fixes

 - Coding style, spelling cleanups

* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
  Documentation: rust: Fix arch support table
  uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
  um: virt-pci: properly remove PCI device from bus
  um: virtio_uml: move device breaking into workqueue
  um: virtio_uml: mark device as unregistered when breaking it
  um: virtio_uml: free command if adding to virtqueue failed
  UML: define RUNTIME_DISCARD_EXIT
  virt-pci: add platform bus support
  um-virt-pci: Make max delay configurable
  um: virt-pci: implement pcibios_get_phb_of_node()
  um: Support LTO
  um: put power options in a menu
  um: Use CFLAGS_vmlinux
  um: Prevent building modules incompatible with MODVERSIONS
  um: Avoid pcap multiple definition errors
  um: Make the definition of cpu_data more compatible
  x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
  rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
  rust: arch/um: Disable FP/SIMD instruction to match x86
  rust: arch/um: Use 'pie' relocation mode under UML
  ...

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
 "JFFS2:
   - Fix memory corruption in error path
   - Spelling and coding style fixes

  UBI:
   - Switch to BLK_MQ_F_BLOCKING in ubiblock
   - Wire up partent device (for sysfs)
   - Multiple UAF bugfixes
   - Fix for an infinite loop in WL error path

  UBIFS:
   - Fix for multiple memory leaks in error paths
   - Fixes for wrong space accounting
   - Minor cleanups
   - Spelling and coding style fixes"

* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
  ubi: block: Fix a possible use-after-free bug in ubiblock_create()
  ubifs: make kobj_type structures constant
  mtd: ubi: block: wire-up device parent
  mtd: ubi: wire-up parent MTD device
  ubi: use correct names in function kernel-doc comments
  ubi: block: set BLK_MQ_F_BLOCKING
  jffs2: Fix list_del corruption if compressors initialized failed
  jffs2: Use function instead of macro when initialize compressors
  jffs2: fix spelling mistake "neccecary"->"necessary"
  ubifs: Fix kernel-doc
  ubifs: Fix some kernel-doc comments
  UBI: Fastmap: Fix kernel-doc
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix permission display of the debugfs files
  ...