- Jul 09, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc filesystem updates from Al Viro: "Assorted normal VFS / filesystems stuff..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dentry name snapshots Make statfs properly return read-only state after emergency remount fs/dcache: init in_lookup_hashtable minix: Deinline get_block, save 2691 bytes fs: Reorder inode_owner_or_capable() to avoid needless fs: warn in case userspace lied about modprobe return
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull spi uaccess delousing from Al Viro: "Getting rid of pointless __get_user() and friends in drivers/spi. [ the only reason it's on a separate branch is that I hoped it would be picked by spi folks; looks like mail asking them to grab it got lost and I hadn't followed up on that ]" * 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: spidev: quit messing with access_ok()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull __copy_in_user removal from Al Viro: "There used to be 6 places in the entire tree calling __copy_in_user(), all of them bogus. Four got killed off in work.drm branch, this takes care of the remaining ones and kills the definition of that sucker" * 'work.__copy_in_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill __copy_in_user() sanitize do_i2c_smbus_ioctl()
-
- Jul 08, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull read/write fix from Al Viro: "file_start_write()/file_end_write() got mixed into vfs_iter_write() by accident; that's a deadlock for all existing callers - they already do that, some - quite a bit outside. Easily fixed, fortunately" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: move file_{start,end}_write() out of do_iter_write()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull iov_iter hardening from Al Viro: "This is the iov_iter/uaccess/hardening pile. For one thing, it trims the inline part of copy_to_user/copy_from_user to the minimum that *does* need to be inlined - object size checks, basically. For another, it sanitizes the checks for iov_iter primitives. There are 4 groups of checks: access_ok(), might_fault(), object size and KASAN. - access_ok() had been verified by whoever had set the iov_iter up. However, that has happened in a function far away, so proving that there's no path to actual copying bypassing those checks is hard and proving that iov_iter has not been buggered in the meanwhile is also not pleasant. So we want those redone in actual copyin/copyout. - might_fault() is better off consolidated - we know whether it needs to be checked as soon as we enter iov_iter primitive and observe the iov_iter flavour. No need to wait until the copyin/copyout. The call chains are short enough to make sure we won't miss anything - in fact, it's more robust that way, since there are cases where we do e.g. forced fault-in before getting to copyin/copyout. It's not quite what we need to check (in particular, combination of iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a cause to skip checks), but that's for later series. For now let's keep might_fault(). - KASAN checks belong in copyin/copyout - at the same level where other iov_iter flavours would've hit them in memcpy(). - object size checks should apply to *all* iov_iter flavours, not just iovec-backed ones. There are two groups of primitives - one gets the kernel object described as pointer + size (copy_to_iter(), etc.) while another gets it as page + offset + size (copy_page_to_iter(), etc.) For the first group the checks are best done where we actually have a chance to find the object size. In other words, those belong in inline wrappers in uio.h, before calling into iov_iter.c. Same kind as we have for inlined part of copy_to_user(). For the second group there is no object to look at - offset in page is just a number, it bears no type information. So we do them in the common helper called by iov_iter.c primitives of that kind. All it currently does is checking that we are not trying to access outside of the compound page; eventually we might want to add some sanity checks on the page involved. So the things we need in copyin/copyout part of iov_iter.c do not quite match anything in uaccess.h (we want no zeroing, we *do* want access_ok() and KASAN and we want no might_fault() or object size checks done on that level). OTOH, these needs are simple enough to provide a couple of helpers (static in iov_iter.c) doing just what we need..." * 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: saner checks on copyin/copyout iov_iter: sanity checks for copy to/from page primitives iov_iter/hardening: move object size checks to inlined part copy_{to,from}_user(): consolidate object size checks copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
-
Kees Cook authored
To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull Writeback error handling updates from Jeff Layton: "This pile represents the bulk of the writeback error handling fixes that I have for this cycle. Some of the earlier patches in this pile may look trivial but they are prerequisites for later patches in the series. The aim of this set is to improve how we track and report writeback errors to userland. Most applications that care about data integrity will periodically call fsync/fdatasync/msync to ensure that their writes have made it to the backing store. For a very long time, we have tracked writeback errors using two flags in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a writeback error occurs (via mapping_set_error) and are cleared as a side-effect of filemap_check_errors (as you noted yesterday). This model really sucks for userland. Only the first task to call fsync (or msync or fdatasync) will see the error. Any subsequent task calling fsync on a file will get back 0 (unless another writeback error occurs in the interim). If I have several tasks writing to a file and calling fsync to ensure that their writes got stored, then I need to have them coordinate with one another. That's difficult enough, but in a world of containerized setups that coordination may even not be possible. But wait...it gets worse! The calls to filemap_check_errors can be buried pretty far down in the call stack, and there are internal callers of filemap_write_and_wait and the like that also end up clearing those errors. Many of those callers ignore the error return from that function or return it to userland at nonsensical times (e.g. truncate() or stat()). If I get back -EIO on a truncate, there is no reason to think that it was because some previous writeback failed, and a subsequent fsync() will (incorrectly) return 0. This pile aims to do three things: 1) ensure that when a writeback error occurs that that error will be reported to userland on a subsequent fsync/fdatasync/msync call, regardless of what internal callers are doing 2) report writeback errors on all file descriptions that were open at the time that the error occurred. This is a user-visible change, but I think most applications are written to assume this behavior anyway. Those that aren't are unlikely to be hurt by it. 3) document what filesystems should do when there is a writeback error. Today, there is very little consistency between them, and a lot of cargo-cult copying. We need to make it very clear what filesystems should do in this situation. To achieve this, the set adds a new data type (errseq_t) and then builds new writeback error tracking infrastructure around that. Once all of that is in place, we change the filesystems to use the new infrastructure for reporting wb errors to userland. Note that this is just the initial foray into cleaning up this mess. There is a lot of work remaining here: 1) convert the rest of the filesystems in a similar fashion. Once the initial set is in, then I think most other fs' will be fairly simple to convert. Hopefully most of those can in via individual filesystem trees. 2) convert internal waiters on writeback to use errseq_t for detecting errors instead of relying on the AS_* flags. I have some draft patches for this for ext4, but they are not quite ready for prime time yet. This was a discussion topic this year at LSF/MM too. If you're interested in the gory details, LWN has some good articles about this: https://lwn.net/Articles/718734/ https://lwn.net/Articles/724307/" * tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: btrfs: minimal conversion to errseq_t writeback error reporting on fsync xfs: minimal conversion to errseq_t writeback error reporting ext4: use errseq_t based error handling for reporting data writeback errors fs: convert __generic_file_fsync to use errseq_t based reporting block: convert to errseq_t based writeback error tracking dax: set errors in mapping when writeback fails Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error fs: new infrastructure for writeback error handling and reporting lib: add errseq_t type and infrastructure for handling it mm: don't TestClearPageError in __filemap_fdatawait_range mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails jbd2: don't clear and reset errors after waiting on writeback buffer: set errors in mapping at the time that the error occurs fs: check for writeback errors after syncing out buffers in generic_file_fsync buffer: use mapping_set_error instead of setting the flag mm: fix mapping_set_error call in me_pagecache_dirty
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull Writeback error handling fixes from Jeff Layton: "The main rationale for all of these changes is to tighten up writeback error reporting to userland. There are many ways now that writeback errors can be lost, such that fsync/fdatasync/msync return 0 when writeback actually failed. This pile contains a small set of cleanups and writeback error handling fixes that I was able to break off from the main pile (#2). Two of the patches in this pile are trivial. The exceptions are the patch to fix up error handling in write_one_page, and the patch to make JFS pay attention to write_one_page errors" * tag 'for-linus-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: fs: remove call_fsync helper function mm: clean up error handling in write_one_page JFS: do not ignore return code from write_one_page() mm: drop "wait" parameter from write_one_page()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "First set of CIFS/SMB3 fixes for the merge window. Also improves POSIX character mapping for SMB3" * tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fix circular locking dependency cifs: set oparms.create_options rather than or'ing in CREATE_OPEN_BACKUP_INTENT cifs: Do not modify mid entry after submitting I/O in cifs_call_async CIFS: add SFM mapping for 0x01-0x1F cifs: hide unused functions cifs: Use smb 2 - 3 and cifsacl mount options getacl functions cifs: prototype declaration and definition for smb 2 - 3 and cifsacl mount options CIFS: add CONFIG_CIFS_DEBUG_KEYS to dump encryption keys cifs: set mapping error when page writeback fails in writepage or launder_pages SMB3: Enable encryption for SMB3.1.1
-
Linus Torvalds authored
Merge tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 fix from Bob Peterson: "Sorry for the additional merge request, but Andreas discovered this problem soon after you processed our last gfs2 merge. This fixes a regression introduced by a patch we did in mid-2015 (commit 88ffbf3e: "GFS2: Use resizable hash table for glocks"), so best to get it fixed. Some code was reverted that should not have been. The patch from Andreas Gruenbacher just re-adds code that had been there originally" * tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix glock rhashtable rcu bug
-
Al Viro authored
take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security layer fixes from James Morris: "Bugfixes for TPM and SELinux" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: IB/core: Fix static analysis warning in ib_policy_change_task IB/core: Fix uninitialized variable use in check_qp_port_pkey_settings tpm: do not suspend/resume if power stays on tpm: use tpm2_pcr_read() in tpm2_do_selftest() tpm: use tpm_buf functions in tpm2_pcr_read() tpm_tis: make ilb_base_addr static tpm: consolidate the TPM startup code tpm: Enable CLKRUN protocol for Braswell systems tpm/tpm_crb: fix priv->cmd_size initialisation tpm: fix a kernel memory leak in tpm-sysfs.c tpm: Issue a TPM2_Shutdown for TPM2 devices. Add "shutdown" to "struct class".
-
Linus Torvalds authored
Merge tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild thin archives updates from Masahiro Yamada: "Thin archives migration by Nicholas Piggin. THIN_ARCHIVES has been available for a while as an optional feature only for PowerPC architecture, but we do not need two different intermediate-artifact schemes. Using thin archives instead of conventional incremental linking has various advantages: - save disk space for builds - speed-up building a little - fix some link issues (for example, allyesconfig on ARM) due to more flexibility for the final linking - work better with dead code elimination we are planning As discussed before, this migration has been done unconditionally so that any problems caused by this will show up with "git bisect". With testing with 0-day and linux-next, some architectures actually showed up problems, but they were trivial and all fixed now" * tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: tile: remove unneeded extra-y in Makefile kbuild: thin archives make default for all archs x86/um: thin archives build fix tile: thin archives fix linking ia64: thin archives fix linking sh: thin archives fix linking kbuild: handle libs-y archives separately from built-in.o archives kbuild: thin archives use P option to ar kbuild: thin archives final link close --whole-archives option ia64: remove unneeded extra-y in Makefile.gate tile: fix dependency and .*.cmd inclusion for incremental build sparc64: Use indirect calls in hamming weight stubs
-
Linus Torvalds authored
Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull misc Kbuild updates from Masahiro Yamada: - Use more portable shebang for Perl scripts - Remove trailing spaces from GCC version in kernel log - Make initramfs generation deterministic * tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: create deterministic initramfs directory listings scripts/mkcompile_h: Remove trailing spaces from compiler version scripts: Switch to more portable Perl shebang
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - Clean up Makefiles and scripts - Improve clang support - Remove unneeded genhdr-y syntax - Remove unneeded cc-option-align macro - Introduce __cc-option macro and use it to fix x86 boot code compiler flags * tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: improve comments on KBUILD_SRC x86/build: Specify stack alignment for clang x86/build: Use __cc-option for boot code compiler options kbuild: Add __cc-option macro kbuild: remove cc-option-align kbuild: replace genhdr-y with generated-y kbuild: clang: Disable 'address-of-packed-member' warning kbuild: remove duplicated arch/*/include/generated/uapi include path kbuild: speed up checksyscalls.sh kbuild: simplify silent build (-s) detection
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "This update consists of: - TAP13 framework and changes to some tests to convert to TAP13. Converting kselftest output to standard format will help identify run to run differences and pin point failures easily. TAP13 format has been in use for several years and the output is human friendly. Please find the specification: https://testanything.org/tap-version-13-specification.html Credit goes to Tim Bird for recommending TAP13 as a suitable format, and to Grag KH for kick starting the work with help from Paul Elder and Alice Ferrazzi The first phase of the TAp13 conversion is included in this update. Future updates will include updates to rest of the tests. - Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels. - Kselftest documnetation has been converted to ReST format. Document now has a new home under Documentation/dev-tools. - kselftest_harness.h is now available for general use as a result of Mickaël Salaün's work. - Several fixes to skip and/or fail tests gracefully on older releases" * tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits) selftests: membarrier: use ksft_* var arg msg api selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13 selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api selftests: breakpoint_test: use ksft_* var arg msg api kselftest: add ksft_print_msg() function to output general information kselftest: make ksft_* output functions variadic selftests/capabilities: Fix the test_execve test selftests: intel_pstate: add .gitignore selftests: fix memory-hotplug test selftests: add missing test name in memory-hotplug test selftests: check percentage range for memory-hotplug test selftests: check hot-pluggagble memory for memory-hotplug test selftests: typo correction for memory-hotplug test selftests: ftrace: Use md5sum to take less time of checking logs tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict kselftest.rst: do some adjustments after ReST conversion selftest/net/Makefile: Specify output with $(OUTPUT) selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS selftest/memfd/Makefile: Fix build error selftests: lib: Skip tests on missing test modules ...
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "Openrisc fixes for this 4.13 merge window, there is not really much here: - include cleanups, one with should reduce build time slightly - switch to new toolchain to new (>2 year old) toolchain prefix" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: defconfig: Cleanup from old Kconfig options openrisc: explicitly include linux/bug.h in asm/fixmap.h openrisc: Switch to use export.h instead of module.h openrisc: Change toolchain from or32- to or1k-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li" * tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix powerpc/mm/hash: Implement mark_rodata_ro() for hash powerpc/vmlinux.lds: Align __init_begin to 16M powerpc/lib/code-patching: Use alternate map for patch_instruction() powerpc/xmon: Add patch_instruction() support for xmon powerpc/kprobes/optprobes: Use patch_instruction() powerpc/kprobes: Move kprobes over to patch_instruction() powerpc/mm/radix: Fix execute permissions for interrupt_vectors powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp() powerpc/64s: Blacklist rtas entry/exit from kprobes powerpc/64s: Blacklist functions invoked on a trap powerpc/64s: Un-blacklist system_call() from kprobes powerpc/64s: Move system_call() symbol to just after setting MSR_EE powerpc/64s: Blacklist system_call() and system_call_common() from kprobes powerpc/64s: Convert .L__replay_interrupt_return to a local label powerpc64/elfv1: Only dereference function descriptor for non-text symbols cxl: Export library to support IBM XSL powerpc/dts: Use #include "..." to include local DT powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8 ...
-
Linus Torvalds authored
Michael Ellerman reported that commit 8c6657cb ("Switch flock copyin/copyout primitives to copy_{from,to}_user()") broke his networking on a bunch of PPC machines (64-bit kernel, 32-bit userspace). The reason is a brown-paper bug by that commit, which had the arguments to "copy_flock_fields()" in the wrong order, breaking the compat handling for file locking. Apparently very few people run 32-bit user space on x86 any more, so the PPC people got the honor of noticing this "feature". Michael also sent a minimal diff that just changed the order of the arguments in that macro. This is not that minimal diff. This not only changes the order of the arguments in the macro, it also changes them to be pointers (to be consistent with all the other uses of those pointers), and makes the functions that do all of this also have the proper "const" attribution on the source pointers in order to make issues like that (using the source as a destination) be really obvious. Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some remaining USB fixes for 4.13-rc1. They were originally scheduled for 4.12-final, but I didn't send them to you in time. Because of that, they were in a separate branch from the larger USB set of patches, so here they are in a separate pull request. Nothing major here a all, just three small patches: - some usb-serial new device ids - xhci bugfix for some crazy AMD hardware All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Limit USB2 port wake support for AMD Promontory hosts USB: serial: qcserial: new Sierra Wireless EM7305 device ID USB: serial: option: add two Longcheer device ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Core Framework: - Report correct error status to user Fix-ups: - Move Backlight headers out of I2C (adp8860, adp8870)" * tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: video: adp8870: move header file out of I2C realm backlight: adp8860: Move header file out of I2C realm backlight: Report error on failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Drivers: - Intel Cherry Trail Whiskey Cove PMIC - TI LP87565 PMIC New Device Support: - Add support for Cannonlake to intel-lpss-pci - Add support for Simatic IOT2000 to intel_quark_i2c_gpio New Functionality: - Add Regulator support (axp20x) Fix-ups: - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec) - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core) - Provide deregistration on unbind (rn5t618) - Rework DT code/documentation (arizona) - Constify things (fsl-imx25-tsadc) - MAINTAINERS updates (DA9062/61) - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C) - Switch to DMI matching (intel_quark_i2c_gpio) - Provide an appropriate level of error checking (wm831x-{i2c,spi}, twl4030-irq, tc6393xb) - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc, stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc, exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099, motorola-cpcap)" [ Skipped the last commit in that series that added eight thousand lines of pointless repeated register definitions. - Linus ] * tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits) mfd: Add LP87565 PMIC support mfd: cros_ec: Free IRQ on exit dt-bindings: vendor-prefixes: Add arctic to vendor prefix mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: axp20x-i2c: Document that this must be builtin on x86 mfd: Add Cherry Trail Whiskey Cove PMIC driver mfd: tc6393xb: Handle return value of clk_prepare_enable mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency mfd: motorola-cpcap: Use devm_of_platform_populate() mfd: smsc-ece: Use devm_of_platform_populate() mfd: qcom-spmi-pmic: Use devm_of_platform_populate() mfd: palmas: Use devm_of_platform_populate() mfd: exynos: Use devm_of_platform_populate() mfd: fsl-imx25: Use devm_of_platform_populate() mfd: cros_ec: Use devm_of_platform_populate() mfd: atmel: Use devm_of_platform_populate() mfd: stm32-timers: Use devm_of_platform_populate() mfd: intel_soc_pmic: Select designware i2c-bus driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Stafford Horne <shorne@gmail.com>
-
Tobias Klauser authored
openrisc's asm/fixmap.h uses the BUG() and BUG_ON() macros but relies on implict inclusion of linux/bug.h which means that changes in other headers could break the build. Thus, add an explicit include. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Stafford Horne <shorne@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This time we've got one core change to introduce a bulk clk_get API, some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits) clk: gemini: Read status before using the value clk: scpi: error when clock fails to register clk: at91: Add sama5d2 suspend/resume gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K clk: keystone: TI_SCI_PROTOCOL is needed for clk driver clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL clk: uniphier: provide NAND controller clock rate clk: hisilicon: add usb2 clocks for hi3798cv200 SoC clk: Add Gemini SoC clock controller clk: iproc: Remove __init marking on iproc_pll_clk_setup() clk: bcm: Add clocks for Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC clk: mediatek: export cpu multiplexer clock for MT8173 SoCs clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work clk: renesas: cpg-mssr: Use of_device_get_match_data() helper clk: hi6220: add acpu clock clk: zx296718: export I2S mux clocks clk: imx7d: create clocks behind rawnand clock gate clk: hi3660: Set PPLL2 to 2880M ...
-
Andreas Gruenbacher authored
Before commit 88ffbf3e "GFS2: Use resizable hash table for glocks", glocks were freed via call_rcu to allow reading the glock hashtable locklessly using rcu. This was then changed to free glocks immediately, which made reading the glock hashtable unsafe. Bring back the original code for freeing glocks via call_rcu. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Cc: stable@vger.kernel.org # 4.3+
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - Minor improvement : avoid requiring unnecessary startup/shutdown callback that many drivers seem to not need - New controller driver for Qualcomm's APCS IPC * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce Qualcomm APCS IPC driver dt-bindings: mailbox: Introduce Qualcomm APCS global binding mailbox: Make startup and shutdown ops optional
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2 ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
-
- Jul 07, 2017
-
-
Al Viro authored
* might_fault() is better checked in caller (and e.g. fault-in + kmap_atomic codepath also needs might_fault() coverage) * we have already done object size checks * we have *NOT* done access_ok() recently enough; we rely upon the iovec array having passed sanity checks back when it had been created and not nothing having buggered it since. However, that's very much non-local, so we'd better recheck that. So the thing we want does not match anything in uaccess - we need access_ok + kasan checks + raw copy without any zeroing. Just define such helpers and use them here. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few hotfixes - various misc updates - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits) mm, memory_hotplug: move movable_node to the hotplug proper mm, memory_hotplug: drop CONFIG_MOVABLE_NODE mm, memory_hotplug: drop artificial restriction on online/offline mm: memcontrol: account slab stats per lruvec mm: memcontrol: per-lruvec stats infrastructure mm: memcontrol: use generic mod_memcg_page_state for kmem pages mm: memcontrol: use the node-native slab memory counters mm: vmstat: move slab statistics from zone to node counters mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare() mm/zswap.c: improve a size determination in zswap_frontswap_init() mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create() mm/swapfile.c: sort swap entries before free mm/oom_kill: count global and memory cgroup oom kills mm: per-cgroup memory reclaim stats mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects mm: kmemleak: factor object reference updating out of scan_block() mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures mm, mempolicy: don't check cpuset seqlock where it doesn't matter mm, cpuset: always use seqlock when changing task's nodemask mm, mempolicy: simplify rebinding mempolicies when updating cpusets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull probe_kernel_read() uses from Al Viro: "Several open-coded probe_kernel_read()..." * 'work.probe_kernel_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dio: use probe_kernel_read() hp_sdc: use probe_kernel_read() hpfb: use probe_kernel_read()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull alpha user access updates from Al Viro: "Several alpha osf_sys.c uaccess cleanups - getdomainname() had insane byte-by-byte copying of string to userland (instead of strnlen + copy_to_user) plus yet another compat variant of timeval/itimerval with associated copyin/copyout primitives" * 'misc.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: osf_sigstack(): switch to put_user() osf_sys.c: switch handling of timeval32/itimerval32 to copy_{to,from}_user() osf_getdomainname(): use copy_to_user()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc compat stuff updates from Al Viro: "This part is basically untangling various compat stuff. Compat syscalls moved to their native counterparts, getting rid of quite a bit of double-copying and/or set_fs() uses. A lot of field-by-field copyin/copyout killed off. - kernel/compat.c is much closer to containing just the copyin/copyout of compat structs. Not all compat syscalls are gone from it yet, but it's getting there. - ipc/compat_mq.c killed off completely. - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to drivers/block/floppy.c where they belong. Yes, there are several drivers that implement some of the same ioctls. Some are m68k and one is 32bit-only pmac. drivers/block/floppy.c is the only one in that bunch that can be built on biarch" * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mqueue: move compat syscalls to native ones usbdevfs: get rid of field-by-field copyin compat_hdio_ioctl: get rid of set_fs() take floppy compat ioctls to sodding floppy.c ipmi: get rid of field-by-field __get_user() ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one rt_sigtimedwait(): move compat to native select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap() put_compat_rusage(): switch to copy_to_user() sigpending(): move compat to native getrlimit()/setrlimit(): move compat to native times(2): move compat to native compat_{get,put}_bitmap(): use unsafe_{get,put}_user() fb_get_fscreeninfo(): don't bother with do_fb_ioctl() do_sigaltstack(): lift copying to/from userland into callers take compat_sys_old_getrlimit() to native syscall trim __ARCH_WANT_SYS_OLD_GETRLIMIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull DRM compat ioctl handling updates from Al Viro: "This kills the double-copies in there and tons of field-by-field copyin/copyout. Several dead ioctls put to rest, while we are at it - the native counterparts had been gone for a decade, so we can bloody well fail early on the compat side. No point rearranging the 32bit structure into 64bit one (and back) only to be told "piss off, I don't know that ioctl" by the native code..." * 'work.drm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits) Fix trivial misannotations mga: switch compat ioctls to drm_ioctl_kernel() radeon: take out dead compat ioctls drm compat: ia64 is not biarch drm_compat_ioctl(): tidy up a bit switch compat_drm_mapbufs() to drm_ioctl_kernel() switch compat_drm_rmmap() to drm_ioctl_kernel() switch compat_drm_mode_addfb2() to drm_ioctl_kernel() switch compat_drm_wait_vblank() to drm_ioctl_kernel() switch compat_drm_update_draw() compat_drm: switch sg ioctls compat_drm: switch AGP compat ioctls to drm_ioctl_kernel() switch compat_drm_dma() to drm_ioctl_kernel() switch compat_drm_resctx() to drm_ioctl_kernel() switch compat_drm_getsareactx() to drm_ioctl_kernel() switch compat_drm_setsareactx() to drm_ioctl_kernel() switch compat_drm_freebufs() to drm_ioctl_kernel() switch compat_drm_markbufs() to drm_ioctl_kernel() switch compat_drm_addmap() to drm_ioctl_kernel() switch compat_drm_getstats() to drm_ioctl_kernel() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "The new features of this release: - Added TRACE_DEFINE_SIZEOF() which allows trace events that use sizeof() it the TP_printk() to be converted to the actual size such that trace-cmd and perf can parse them correctly. - Some rework of the TRACE_DEFINE_ENUM() such that the above TRACE_DEFINE_SIZEOF() could reuse the same code. - Recording of tgid (Thread Group ID). This is similar to how task COMMs are recorded (cached at sched_switch), where it is in a table and used on output of the trace and trace_pipe files. - Have ":mod:<module>" be cached when written into set_ftrace_filter. Then the functions of the module will be traced at module load. - Some random clean ups and small fixes" * tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (26 commits) ftrace: Test for NULL iter->tr in regex for stack_trace_filter changes ftrace: Decrement count for dyn_ftrace_total_info for init functions ftrace: Unlock hash mutex on failed allocation in process_mod_list() tracing: Add support for display of tgid in trace output tracing: Add support for recording tgid of tasks ftrace: Decrement count for dyn_ftrace_total_info file ftrace: Remove unused function ftrace_arch_read_dyn_info() sh/ftrace: Remove only user of ftrace_arch_read_dyn_info() ftrace: Have cached module filters be an active filter ftrace: Implement cached modules tracing on module load ftrace: Have the cached module list show in set_ftrace_filter ftrace: Add :mod: caching infrastructure to trace_array tracing: Show address when function names are not found ftrace: Add missing comment for FTRACE_OPS_FL_RCU tracing: Rename update the enum_map file tracing: Add TRACE_DEFINE_SIZEOF() macros tracing: define TRACE_DEFINE_SIZEOF() macro to map sizeof's to their values tracing: Rename enum_replace to eval_replace trace: rename enum_map functions trace: rename trace.c enum functions ...
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull more s390 updates from Martin Schwidefsky: - The fixup for the blk-mq clash with the scm driver - An improvement for the dasd driver in regard to raw I/O - Bug fixes and cleanup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: Update my email address s390/syscalls: Fix out of bounds arguments access s390/vfio_ccw: remove unused variable s390/dasd: remove unneeded code s390/crash: Remove unused KEXEC_NOTE_BYTES s390/zcrypt: Fix missing newlines at some debug feature messages. s390/dasd: Make raw I/O usable without prefix support s390/dasd: Rename dasd_raw_build_cp() s390/dasd: Refactor prefix_LRE() and related functions s390: fix up for "blk-mq: switch ->queue_rq return value to blk_status_t"
-