Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de

Fix ranges property warnings:
pci@f0000d00:ranges: 'oneOf' conditional failed, one must be fixed:

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-3-agust@denx.de

Add ranges property to fix build warnings:
Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge)

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-2-agust@denx.de

(!ptr && !ptr->foo) strikes again. :)

The expression (!ptr && !ptr->foo) is bogus and in case ptr is NULL,
it leads to a NULL pointer dereference: ptr->foo.

Fix this by converting && to ||

This issue was detected with the help of Coccinelle, and audited and
fixed manually.

Fixes: 1a0d0d5e ("powerpc/vas: Add platform specific user window operations")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015050345.GA1161918@embeddedor

Enable STRICT_KERNEL_RWX on fsl_booke.

For that, we need additional TLBCAMs dedicated to linear mapping,
based on the alignment of _sinittext.

By default, up to 768 Mbytes of memory are mapped.
It uses 3 TLBCAMs of size 256 Mbytes.

With a data alignment of 16, we need up to 9 TLBCAMs:
  16/16/16/16/64/64/64/256/256

With a data alignment of 4, we need up to 12 TLBCAMs:
  4/4/4/4/16/16/16/64/64/64/256/256

With a data alignment of 1, we need up to 15 TLBCAMs:
  1/1/1/1/4/4/4/16/16/16/64/64/64/256/256

By default, set a 16 Mbytes alignment as a compromise between memory
usage and number of TLBCAMs. This can be adjusted manually when needed.

For the time being, it doens't work when the base is randomised.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/29f9e5d2bbbc83ae9ca879265426a6278bf4d5bb.1634292136.git.christophe.leroy@csgroup.eu

After init, set readonly memory as ROX and set readwrite
memory as RWX, if STRICT_KERNEL_RWX is enabled.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/66bef0b9c273e1121706883f3cf5ad0a053d863f.1634292136.git.christophe.leroy@csgroup.eu

Reorganise TLBCAM allocation so that when STRICT_KERNEL_RWX is
enabled, TLBCAMs are allocated such that readonly memory uses
different TLBCAMs.

This results in an allocation looking like:

Memory CAM mapping: 4/4/4/1/1/1/1/16/16/16/64/64/64/256/256 Mb, residual: 256Mb

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca169bc288261a0e0558712f979023c3a960ebb.1634292136.git.christophe.leroy@csgroup.eu

In order to be able to call map_mem_in_cams() once more
after init for STRICT_KERNEL_RWX, add an argument.

For now, map_mem_in_cams() is always called only during init.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3b69a7e0b393b16984ade882a5eae5d727717459.1634292136.git.christophe.leroy@csgroup.eu

Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.

When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.

We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.

So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9d517fbfbc940f56103c46b323f6eb8f4485571.1634292136.git.christophe.leroy@csgroup.eu

Don't force MAS3_SX and MAS3_UX at all time. Take into account the
exec flag.

While at it, fix a couple of closeby style problems (indent with space
and unnecessary parenthesis), it keeps more readability.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5467044e59f27f9fcf709b9661779e3ce5f784f6.1634292136.git.christophe.leroy@csgroup.eu

We have a myriad of CONFIG symbols around different variants
of BOOKEs, which would be worth tidying up one day.

But at least, make file names and CONFIG option match:

We have CONFIG_FSL_BOOKE and CONFIG_PPC_FSL_BOOK3E.

fsl_booke.c is selected by and only by CONFIG_PPC_FSL_BOOK3E.
So rename it fsl_book3e to reduce confusion.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dc871db1f67739319bec11f049ca450da1c13a2.1634292136.git.christophe.leroy@csgroup.eu

fsl_booke and 44x are not able to map kernel linear memory with
pages, so they can't support DEBUG_PAGEALLOC and KFENCE, and
STRICT_KERNEL_RWX is also a problem for now.

Enable those only on book3s (both 32 and 64 except KFENCE), 8xx and 40x.

Fixes: 88df6e90 ("[POWERPC] DEBUG_PAGEALLOC for 32-bit")
Fixes: 95902e6c ("powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32")
Fixes: 90cbac0e ("powerpc: Enable KFENCE for PPC32")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1ad9fdd9b27da3fdfa16510bb542ed51fa6e134.1634292136.git.christophe.leroy@csgroup.eu

Fix following coccicheck warning:
./arch/powerpc/kexec/file_load_64.c:698:1-22: WARNING: Function
for_each_node_by_type should have of_node_put() before goto

Early exits from for_each_node_by_type should decrement the
node reference counter.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211018015418.10182-1-wanjiabing@vivo.com

Fix following coccicheck warning:

./arch/powerpc/platforms/pseries/iommu.c:924:1-28: WARNING: Function
for_each_node_with_property should have of_node_put() before break

Early exits from for_each_node_with_property should decrement the
node reference counter.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211014075624.16344-1-wanjiabing@vivo.com

The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.

As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.

There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au

.opd section contains function descriptors used to locate
functions in the kernel. If someone is able to modify a
function descriptor he will be able to run arbitrary
kernel function instead of another.

To avoid that, move .opd section inside read-only memory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3cd40b682fb6f75bb40947b55ca0bac20cb3f995.1634136222.git.christophe.leroy@csgroup.eu

On power9 and earlier platforms, the default event used for cyles and
instructions is PM_CYC (0x0001e) and PM_INST_CMPL (0x00002)
respectively. These events use two programmable PMCs and by default will
count irrespective of the run latch state (idle state). But since they
use programmable PMCs, these events can lead to multiplexing with other
events, because there are only 4 programmable PMCs. Hence in power10,
performance monitoring unit (PMU) driver uses performance monitor
counter 5 (PMC5) and performance monitor counter6 (PMC6) for counting
instructions and cycles.

Currently on power10, the event used for cycles is PM_RUN_CYC (0x600F4)
and instructions uses PM_RUN_INST_CMPL (0x500fa). But counting of these
events in idle state is controlled by the CC56RUN bit setting in Monitor
Mode Control Register0 (MMCR0). If the CC56RUN bit is zero, PMC5/6 will
not count when CTRL[RUN] (run latch) is zero. This could lead to missing
some counts if a thread is in idle state during system wide profiling.

To fix it, set the CC56RUN bit in MMCR0 for power10, which makes PMC5
and PMC6 count instructions and cycles regardless of the run latch
state. Since this change make PMC5/6 count as PM_INST_CMPL/PM_CYC,
rename the event code 0x600f4 as PM_CYC instead of PM_RUN_CYC and event
code 0x500fa as PM_INST_CMPL instead of PM_RUN_INST_CMPL. The changes
are only for PMC5/6 event codes and will not affect the behaviour of
PM_RUN_CYC/PM_RUN_INST_CMPL if progammed in other PMC's.

Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.cm>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Tweak change log wording for style and consistency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007075121.28497-1-atrajeev@linux.vnet.ibm.com

We fix the following warnings when building kernel with W=1:
arch/powerpc/kernel/eeh.c:598: warning: Function parameter or member 'function' not described in 'eeh_pci_enable'
arch/powerpc/kernel/eeh.c:774: warning: Function parameter or member 'edev' not described in 'eeh_set_dev_freset'
arch/powerpc/kernel/eeh.c:774: warning: expecting prototype for eeh_set_pe_freset(). Prototype was for eeh_set_dev_freset() instead
arch/powerpc/kernel/eeh.c:814: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset_full'
arch/powerpc/kernel/eeh.c:944: warning: Function parameter or member 'ops' not described in 'eeh_init'
arch/powerpc/kernel/eeh.c:1451: warning: Function parameter or member 'include_passed' not described in 'eeh_pe_reset'
arch/powerpc/kernel/eeh.c:1526: warning: Function parameter or member 'func' not described in 'eeh_pe_inject_err'
arch/powerpc/kernel/eeh.c:1526: warning: Excess function parameter 'function' described in 'eeh_pe_inject_err'

Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211009041630.4135-1-songkai01@inspur.com

CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is
used to compile support for other platforms such as Microwatt. There
is no need for OPAL calls on these.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org

max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.

It must only include lowmem PFNs, like other architectures.

Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu

Patch adds support to include Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers. Update the definition of PERF_REG_PMU_MASK_300/31 and
PERF_REG_EXTENDED_MAX to include these SPR's.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Kajol <Jain&lt;kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-4-atrajeev@linux.vnet.ibm.com

PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask
value for extended registers. Current definition of these mask values
uses hex constant and does not use registers by name, making it less
readable. Patch refactor the macro values by or'ing together the actual
register value constants. Also include PERF_REG_EXTENDED_MAX as
part of enum definition.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol <Jain&lt;kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-2-atrajeev@linux.vnet.ibm.com

This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.

Remove it to prevent confusion.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-5-nathanl@linux.ibm.com

The core DLPAR code supports two actions (add and remove) and three
subtypes of action:

* By DRC index: the action is attempted on a single specified resource.
  This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
  beginning at the specified index. This is implemented only by the memory
  DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
  specified number of resources to which the action can be applied.

I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:

  $ ppc64_cpu --smt ; nproc
  SMT=8
  24
  $ printf "cpu remove count 2" > /sys/kernel/dlpar
  $ nproc
  8
  $ printf "cpu add count 2" > /sys/kernel/dlpar
  -bash: printf: write error: Invalid argument
  $ dmesg | tail -2
  pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
  dlpar: Could not handle DLPAR request "cpu add count 2"
  $ nproc
  8
  $ drmgr -c cpu -a -q 2         # this uses the by-index method
  Validating CPU DLPAR capability...yes.
  CPU 1
  CPU 17
  $ nproc
  24

This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.

This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.

Summary:

* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
  difficult to test.

So let's remove it.

Fixes: ac713800 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184 ("powerpc/pseries: Add CPU dlpar add functionality")
Fixes: b015f6bc ("powerpc/pseries: Add cpu DLPAR support for drc-info property")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com

If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com

On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.

The CPU DLPAR code has the following shortcomings:

* Cache nodes returned as siblings of a new CPU node by
  ibm,configure-connector are silently discarded; only the CPU node is
  added to the device tree.

* Cache nodes which become unreferenced in the processor removal path are
  not removed from the device tree. This can lead to duplicate nodes when
  the post-migration device tree update code replaces cache nodes.

This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.

Booted with two processors:

  $ pwd
  /sys/firmware/devicetree/base/cpus
  $ ls -1d */
  l2-cache@2010/
  l2-cache@2011/
  l3-cache@3110/
  l3-cache@3111/
  PowerPC,POWER9@0/
  PowerPC,POWER9@8/
  $ lsprop */l2-cache
  l2-cache@2010/l2-cache
                 00003110 (12560)
  l2-cache@2011/l2-cache
                 00003111 (12561)
  PowerPC,POWER9@0/l2-cache
                 00002010 (8208)
  PowerPC,POWER9@8/l2-cache
                 00002011 (8209)
  $ ls /sys/devices/system/cpu/cpu0/cache/
  index0  index1  index2  index3

After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:

  $ ls -1d */
  l2-cache@2010/
  l2-cache@2011/
  l3-cache@3110/
  l3-cache@3111/
  PowerPC,POWER9@0/
  PowerPC,POWER9@10/
  PowerPC,POWER9@8/
  $ lsprop PowerPC\,POWER9@10/l2-cache
  PowerPC,POWER9@10/l2-cache
                 00002012 (8210)
  $ ls /sys/devices/system/cpu/cpu16/cache/
  index0  index1
  $ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name
  /sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
  /sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
  /sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
  /sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT
  /sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE
  /sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE
  /sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT
  /sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE

When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:

  $ ls -1d */
  l2-cache@2010/
  l2-cache@2011/
  l3-cache@3110/
  l3-cache@3111/
  PowerPC,POWER9@0/

When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:

  Duplicate name in cpus, renamed to "l2-cache@2011#1"
  Duplicate name in cpus, renamed to "l3-cache@3111#1"

and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:

  $ lsprop l[23]-cache@*/ibm,phandle
  l2-cache@2010/ibm,phandle
                   00002010 (8208)
  l2-cache@2011#1/ibm,phandle
                   00002011 (8209)
  l2-cache@2011/ibm,phandle
                   00002011 (8209)
  l3-cache@3110/ibm,phandle
                   00003110 (12560)
  l3-cache@3111#1/ibm,phandle
                   00003111 (12561)
  l3-cache@3111/ibm,phandle
                   00003111 (12561)

Address these issues by:

* Correctly processing siblings of the node returned from
  dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
  that they are not associated with other CPUs or caches.

Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.

Fixes: ac713800 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com

vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:

BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160
[c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0
[c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0
[c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70
[c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0
[c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250

The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.

Fixes: ca3f969d ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com

Add comments more clearly documenting that this function determines whether
hypervisor-level preemption of the VM has occurred.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-2-nathanl@linux.ibm.com

When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.

Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.

Fixes: 107c5500 ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com

While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:

  --- interrupt: 600 at memset+0x60/0xc0
  NIP:  c0021414 LR: c03fc49c CTR: 00007fff
  REGS: ca021c10 TRAP: 0600   Tainted: G        W          (5.14.2-pmac-00727-g12a41fa69492)
  MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 44008442  XER: 20000100
  DAR: cab80020 DSISR: 00017c07
  GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
  GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
  GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
  GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
  NIP [c0021414] memset+0x60/0xc0
  LR [c03fc49c] chipsfb_pci_init+0x160/0x580
  --- interrupt: 600
  [ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
  [ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8
  [ca021d50] [c043d584] really_probe.part.0+0xac/0x388
  [ca021d70] [c043d914] __driver_probe_device+0xb4/0x170
  [ca021d90] [c043da18] driver_probe_device+0x48/0x144
  [ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4
  [ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0
  [ca021e10] [c043c724] bus_add_driver+0x190/0x22c
  [ca021e40] [c043ee94] driver_register+0x9c/0x170
  [ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec
  [ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270
  [ca021f10] [c0006fdc] kernel_init+0x28/0x11c
  [ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c
  Instruction dump:
  7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
  7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970

This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.

When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:

  drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
  drivers/video/fbdev/chipsfb.c:334:17:    expected void *
  drivers/video/fbdev/chipsfb.c:334:17:    got char [noderef] __iomem *screen_base
  drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576

Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.

Fixes: 8c870933 ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914143802.54325-1-hegdevasant@linux.vnet.ibm.com

UPD_CONSTR was previously a preprocessor define for an old GCC 4.9
inline asm bug with m<> constraints.

Fixes: 6563139d ("powerpc: remove GCC version check for UPD_CONSTR")
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914161712.2463458-1-ndesaulniers@google.com

powerpc/mem: Fix arch/powerpc/mm/mem.c:53:12: error: no previous prototype for 'create_section_mapping'

Commit 8e11d62e ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6b ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h

Fixes: 8e11d62e ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu

On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups
that are done under pcibios_add_device() which in turn is only called in
pci_device_add() whih is called when a PCI device is scanned.

pci_dev_assign_added() is called in pci_bus_add_device() which is only
called after scanning the device. Thus pci_dev_is_added() is always
false and can be dropped.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log slightly to reflect Oliver's comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210910141940.2598035-2-schnelle@linux.ibm.com

pmac_md doesn't exist anymore, remove stall declaration.

Fixes: e8222502 ("[PATCH] powerpc: Kill _machine and hard-coded platform numbers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b2e52934e5a500f149e6d94db3cfa0569bc35081.1630657402.git.christophe.leroy@csgroup.eu

commit 6d7f58b0 ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
removed of_show_percpuinfo but didn't remove the prototype.

Remove it.

Fixes: 6d7f58b0 ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903063246.70691-1-dja@axtens.net

Fix sparse errors:
  arch/powerpc/platforms/44x/ppc476.c:236:17: warning: cast removes address space '__iomem' of expression
  arch/powerpc/platforms/44x/ppc476.c:241:34: warning: incorrect type in argument 1 (different address spaces)
  arch/powerpc/platforms/44x/ppc476.c:241:34:    expected void const volatile [noderef] __iomem *addr
  arch/powerpc/platforms/44x/ppc476.c:241:34:    got unsigned char [usertype] *
  arch/powerpc/platforms/44x/ppc476.c:243:17: warning: incorrect type in argument 1 (different address spaces)
  arch/powerpc/platforms/44x/ppc476.c:243:17:    expected void volatile [noderef] __iomem *addr
  arch/powerpc/platforms/44x/ppc476.c:243:17:    got unsigned char [usertype] *[assigned] fpga

Mark 'fpga' pointer as __iomem.

Fixes: ab9a4183 ("powerpc: Update currituck pci/usb fixup for new board revision")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aa6055769b92a5d8685b8d0adab99c48a0b0ef4b.1631956926.git.christophe.leroy@csgroup.eu

When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.

arch/powerpc/kernel/smp.c:
  int __cpu_up(unsigned int cpu, struct task_struct *tidle)
  {
  	...
  	if (smp_ops->give_timebase)
  		smp_ops->give_timebase();
  	...
  }

  void start_secondary(void *unused)
  {
  	...
  	if (smp_ops->take_timebase)
  		smp_ops->take_timebase();
  	...
  }

When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
 smp_85xx_ops.give_timebase is NULL,
 smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.

Timebase  synchronization does not depend on CONFIG_HOTPLUG_CPU.

Fixes: 56f1ba28 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com

When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.

Fixes: 56f1ba28 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com

The upcoming PAPR spec adds a 2M page size, bit 23 right after 16G page
size in the "ibm,query-pe-dma-window" call.

This adds support for the new page size. Since the new page size is out
of sorted order, this changes the loop to not assume that shift[] is
sorted.

This has now been tested and is known to work on a pre-release version
of phyp.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006044735.1114669-1-aik@ozlabs.ru