Due to signed/unsigned comparison, the expression:

	info->size_goal - skb->len > 0

evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.

Due to the above, syzbot is able to trigger the following WARN_ON():

WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS:  00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
 release_sock+0xb4/0x1b0 net/core/sock.c:3206
 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
 call_write_iter include/linux/fs.h:2163 [inline]
 new_sync_write+0x40b/0x640 fs/read_write.c:507
 vfs_write+0x7cf/0xae0 fs/read_write.c:594
 ksys_write+0x1ee/0x250 fs/read_write.c:647
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000

Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.

Additionally, ensure that the skb in the tx cache always carries
the relevant extension.

Reported-and-tested-by:  <syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com>
Fixes: 1094c6fe

 ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc8

 ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-09-21

This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================

Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 0b9902c1 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c

 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.

STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.

So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.

As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.

Fixes: b41b554c

 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().

qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).

Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.

Fix it by checking the pointer for NULL before accessing it.

Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.

Fixes: eff73e16

 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Fix mdiobus users with devres

Commit ac3a68d5

 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski has introduced two
classes of potential bugs by making the devres callback of
devm_mdiobus_alloc stop calling mdiobus_unregister.

The exact buggy circumstances are presented in the individual commit
messages. I have searched the tree for other occurrences, but at the
moment:

- for issue (a) I have no concrete proof that other buses except SPI and
  I2C suffer from it, and the only SPI or I2C device drivers that call
  of_mdiobus_alloc are the DSA drivers that leave a NULL
  ds->slave_mii_bus and a non-NULL ds->ops->phy_read, aka ksz9477,
  ksz8795, lan9303_i2c, vsc73xx-spi.

- for issue (b), all drivers which call of_mdiobus_alloc either use
  of_mdiobus_register too, or call mdiobus_unregister sometime within
  the ->remove path.

Although at this point I've seen enough strangeness caused by this
"device_del during ->shutdown" that I'm just going to copy the SPI and
I2C subsystem maintainers to this patch series, to get their feedback
whether they've had reports about things like this before. I don't think
other buses behave in this way, it forces SPI and I2C devices to have to
protect themselves from a really strange set of issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, the Realtek drivers fall under category (b). To solve it,
we can register the MDIO bus under devres too, which restores the
previous behavior.

Fixes: ac3a68d5

 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
	/* For compatibility with error handling in drivers. */
	if (bus->state == MDIOBUS_ALLOCATED) {
		kfree(bus);
		return;
	}

	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
	bus->state = MDIOBUS_RELEASED;

	put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, DSA falls into category (a), it tries to be helpful and
registers an MDIO bus on behalf of the switch, which might be on such a
bus. I've no idea why it does it under devres.

It does this on probe:

	if (!ds->slave_mii_bus && ds->ops->phy_read)
		alloc and register mdio bus

and this on remove:

	if (ds->slave_mii_bus && ds->ops->phy_read)
		unregister mdio bus

I _could_ imagine using devres because the condition used on remove is
different than the condition used on probe. So strictly speaking, DSA
cannot determine whether the ds->slave_mii_bus it sees on remove is the
ds->slave_mii_bus that _it_ has allocated on probe. Using devres would
have solved that problem. But nonetheless, the existing code already
proceeds to unregister the MDIO bus, even though it might be
unregistering an MDIO bus it has never registered. So I can only guess
that no driver that implements ds->ops->phy_read also allocates and
registers ds->slave_mii_bus itself.

So in that case, if unregistering is fine, freeing must be fine too.

Stop using devres and free the MDIO bus manually. This will make devres
stop attempting to free a still registered MDIO bus on ->shutdown.

Fixes: ac3a68d5

 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a spelling typo in ice.rst

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the blamed commit, dsa_tree_teardown_switches() was split into two
smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports.

However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports.

Fixes: a57d8c21

 ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: fixes 2021-09-20

Please apply the following patches for smc to netdev's net tree.

The first patch adds a missing error check, and the second patch
fixes a possible leak of a lock in a worker.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().

Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().

Fixes: b286a065

 ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Coverity stumbled over a missing error check in smc_clc_prfx_set():

*** CID 1475954:  Error handling issues  (CHECKED_RETURN)
/net/smc/smc_clc.c: 233 in smc_clc_prfx_set()
>>>     CID 1475954:  Error handling issues  (CHECKED_RETURN)
>>>     Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times).
233     	kernel_getsockname(clcsock, (struct sockaddr *)&addrs);

Add the return code check in smc_clc_prfx_set().

Fixes: c246d942

 ("net/smc: restructure netinfo for CLC proposal msgs")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_get_reset_status() should return the tqp reset status.
However, if the CMDQ fails, the caller will take it as tqp reset
success status by mistake. Therefore, uses a parameters to get
the tqp reset status instead.

Fixes: 46a3df9f

 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The input parameters may not be reliable, so check the vlan id before
using it, otherwise may set wrong vlan id into hardware.

Fixes: dc8131d8

 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls")
Signed-off-by: liaoguojia <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The input parameters may not be reliable. Before using the
queue id, we should check this parameter. Otherwise, memory
overwriting may occur.

Fixes: d3410018

 ("net: hns3: refactor the mailbox message between PF and VF")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs.
So the actual vf id is equal to vport_id minus 1.

Some VF print logs are actually vport, and logs of vf id actually use
vport id, so this patch fixes them.

Fixes: ac887be5 ("net: hns3: change print level of RAS error log from warning to error")
Fixes: adcf738b

 ("net: hns3: cleanup some print format warning")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vf id from ethtool is added 1 before configured to driver.
So it's necessary to minus 1 when printing it, in order to
keep consistent with user's configuration.

Fixes: dd74f815

 ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When user change rss 'hfunc' without set rss 'hkey' by ethtool
-X command, the driver will ignore the 'hfunc' for the hkey is
NULL. It's unreasonable. So fix it.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 374ad291

 ("net: hns3: Add RSS general configuration support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without CONFIG_COMMON_CLK, this fails to link:

arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c':
ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate'
arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev'
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach':
ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate'

Fixes: a7e1abad

 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c5

 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.

The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.

This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.

Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.

Tested with fib_nexthops.sh:

Tests passed: 222
Tests failed:   0

[1]
 divide error: 0000 [#1] PREEMPT SMP KASAN
 CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
 RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
 Call Trace:
  fib_select_multipath+0x79b/0x1530
  fib_select_path+0x8fb/0x1c10
  ip_route_output_key_hash_rcu+0x1198/0x2da0
  ip_route_output_key_hash+0x190/0x340
  ip_route_output_flow+0x21/0x120
  raw_sendmsg+0x91d/0x2e10
  inet_sendmsg+0x9e/0xe0
  __sys_sendto+0x23d/0x360
  __x64_sys_sendto+0xe1/0x1b0
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: stable@vger.kernel.org
Fixes: 283a72a5

 ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.

The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.

                      CPU0       |                   CPU1       | napi.state
===============================================================================
napi_disable()                   |                              | SCHED | NPSVC
napi_enable()                    |                              |
{                                |                              |
    smp_mb__before_atomic();     |                              |
    clear_bit(SCHED, &n->state); |                              | NPSVC
                                 | napi_schedule_prep()         | SCHED | NPSVC
                                 | napi_poll()                  |
                                 |   napi_complete_done()       |
                                 |   {                          |
                                 |      if (n->state & (NPSVC | | (1)
                                 |               _BUSY_POLL)))  |
                                 |           return false;      |
                                 |     ................         |
                                 |   }                          | SCHED | NPSVC
                                 |                              |
    clear_bit(NPSVC, &n->state); |                              | SCHED
}                                |                              |
                                 |                              |
napi_schedule_prep()             |                              | SCHED | MISSED (2)

(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list

Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.

1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
   will cause the entire rtnl_lock to be locked, affecting the overall
   system.

This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.

Fixes: 2d8bff12

 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define
executables. TEST_PROGS is for shell scripts that need to be
installed and run by the common lib.mk framework. The common
framework doesn't touch TEST_PROGS when it does build and clean.

As a result "make kselftest-clean" and "make clean" fail to remove
executables. Run and install work because the common framework runs
and installs TEST_PROGS. Build works because the Makefile defines
"all" rule which is unnecessary if TEST_GEN_PROGS is used.

Use TEST_GEN_PROGS so the common framework can handle build/run/
install/clean properly.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Any link state change that's done prior to net device registration
isn't reflected on the state, thus the operational state is left
obsolete, with 'UNKNOWN' status.

To resolve the issue, query link state from FW upon open operations
to ensure operational state is updated.

Fixes: c27a02cd

 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the args to fprintf(). Splitting the message ends up passing
incorrect arg for "sigurg %d" and an extra arg overall. The test
result message ends up incorrect.

test_unix_oob.c: In function ‘main’:
test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=]
  274 |   fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
      |                                          ~^
      |                                           |
      |                                           int
      |                                          %s
  275 |   "atmark %d\n", signal_recvd, len, oob, atmark);
      |   ~~~~~~~~~~~~~
      |   |
      |   char *
test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args]
  274 |   fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to the inclusion of nvmem handling into the mac-address getter
function of_get_mac_address() by
commit d01f449c ("of_net: add NVMEM support to of_get_mac_address")
it is now possible to get a -EPROBE_DEFER return code. Which did cause
bgmac to assign a random ethernet address.

This exact issue happened on my Meraki MR32. The nvmem provider is
an EEPROM (at24c64) which gets instantiated once the module
driver is loaded... This happens once the filesystem becomes available.

With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
Then the driver subsystem will reschedule the probe at a later time.

Cc: Petr Štetiar <ynezz@true.cz>
Cc: Michael Walle <michael@walle.cc>
Fixes: d01f449c

 ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 86f8b1c0 ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.

Commit fb6ec87f ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.

Commit 08156ba4 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.

When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:

devlink_port_unregister:
	WARN_ON(!list_empty(&devlink_port->region_list));

So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.

Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.

But DSA's layering stays in our way quite badly here.

The options I've considered are:

1. Introduce a function in devlink to just change a port's type and
   flavour. No dice, devlink keeps a lot of state, it really wants the
   port to not be registered when you set its parameters, so changing
   anything can only be done by destroying what we currently have and
   recreating it.

2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
   and the region returned, keep those in a list, then when the devlink
   port unregister needs to take place, the existing devlink regions are
   destroyed by DSA, and we replay the creation of new regions using the
   cached parameters. Problem: mv88e6xxx keeps the region pointers in
   chip->ports[port].region, and these will remain stale after DSA frees
   them. There are many things DSA can do, but updating mv88e6xxx's
   private pointers is not one of them.

3. Just let the driver do it (i.e. introduce a very specific method
   called ds->ops->port_reinit_as_unused, which unregisters its devlink
   port devlink regions, then the old devlink port, then registers the
   new one, then the devlink port regions for it). While it does work,
   as opposed to the others, it's pretty horrible from an API
   perspective and we can do better.

4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
   which in the case of mv88e6xxx must register and unregister the
   devlink port regions. Call these 2 methods when the port must be
   reinitialized as unused.

Naturally, I went for the 4th approach.

Fixes: 08156ba4

 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MODULE_DEVICE_TABLE already creates proper alias for platform
driver.  Having another MODULE_ALIAS causes the alias to be duplicated.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Colin Foster says:

====================
ocelot phylink fixes

When the ocelot driver was migrated to phylink, e6e12df6

 ("net:
mscc: ocelot: convert to phylink") there were two additional writes to
registers that became stale. One write was to DEV_CLOCK_CFG and one was
to ANA_PFC_PCF_CFG.

Both of these writes referenced the variable "speed" which originally
was set to OCELOT_SPEED_{10,100,1000,2500}. These macros expand to
values of 3, 2, 1, or 0, respectively. After the update, the variable
speed is set to SPEED_{10,100,1000,2500} which expand to 10, 100, 1000,
and 2500. So invalid values were getting written to the two registers,
which would lead to either a lack of functionality or undefined
funcationality.

Fixing these values was the intent of v1 of this patch set - submitted
as "[PATCH v1 net] net: ethernet: mscc: ocelot: bug fix when writing MAC
speed"

During that review it was determined that both writes were actually
unnecessary. DEV_CLOCK_CFG is a duplicate write, so can be removed
entirely. This was accidentally submitted as as a new, lone patch titled
"[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to
DEV_CLOCK_CFG". This is part of what is considered v2 of this patch set.

Additionally, the write to ANA_PFC_PFC_CFG is also unnecessary. Priority
flow contol is disabled, so configuring it is useless and should be
removed. This was also submitted as a new, lone patch titled "[PATCH v1
net] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG".
This is the rest of what is considered v2 of this patch set.

v3
Identical to v2, but fixes the patch numbering to v3 and submitting the
two changes as a patch set.

v2
Note: I misunderstood and submitted two new "v1" patches instead of a
single "v2" patch set.
- Remove the buggy writes altogher
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.

Fixes: e6e12df6

 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.

Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.

Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.

Fixes: e6e12df6

 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.

sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.

lock_sock_nested() is a straight forward 'mutex' lock operation:

  might_sleep();
  spin_lock_bh(sock::sk_lock.slock)
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }

The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:

  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();

The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.

But that's from the lockdep perspective still the wrong place:

 1) The mutex_acquire() is issued _after_ the successful acquisition which
    is pointless because in a dead lock scenario this point is never
    reached which means that if the deadlock is the first instance of
    exposing the wrong lock order lockdep does not have a chance to detect
    it.

 2) It only works because lockdep is rather lax on the context from which
    the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
    and therefore non-preemptible region is obviously invalid, except for a
    trylock which is clearly not the case here.

    This 'works' stops working on RT enabled kernels where the bottom halves
    serialization is done via a local lock, which exposes this misplacement
    because the 'mutex' and the local lock nest the wrong way around and
    lockdep complains rightfully about a lock inversion.

The placement is wrong since the initial commit a5b5bb9a

 ("[PATCH]
lockdep: annotate sk_locks") which introduced this.

Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.

lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:

  spin_lock_bh(sock::sk_lock.slock)
  if (!sock::sk_lock.owned)
      return false;
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }
  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();
  return true;

But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.

In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().

Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.

As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.

The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.

Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.

Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The file sja1105.txt was converted to nxp,sja1105.yaml.

Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
not available to the igc driver. Make this driver depend on
PTP_1588_CLOCK_OPTIONAL so that it will build without errors.

Various igc commits have used ptp_*() functions without checking
that PTP_1588_CLOCK is enabled. Fix all of these here.

Fixes these build errors:

ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':

Fixes: 64433e5b ("igc: Enable internal i225 PPS")
Fixes: 60dbede0 ("igc: Add support for ethtool GET_TS_INFO command")
Fixes: 87938851 ("igc: enable auxiliary PHC functions for the i225")
Fixes: 5f295805

 ("igc: Add basic skeleton for PTP")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ederson de Souza <ederson.desouza@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only struct dim_sample member that does not get
initialized by dim_update_sample() is comp_ctr. (There
is special API to initialize comp_ctr:
dim_update_sample_with_comps(), and it is currently used
only for RDMA.) comp_ctr is used to compute curr_stats->cmps
and curr_stats->cpe_ratio (see dim_calc_stats()) which in
turn are consumed by the rdma_dim_*() API.  Therefore,
functionally, the net_dim*() API consumers are not affected.
Nevertheless, fix the computation of statistics based
on an uninitialized variable, even if the mentioned statistics
are not used at the moment.

Fixes: ae0e6a5d

 ("enetc: Add adaptive interrupt coalescing")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.

The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter.

Fixes: d4fd0404

 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We try to use build_skb() if we had sufficient tailroom. But we forget
to release the unused pages chained via private in big mode which will
leak pages. Fixing this by release the pages after building the skb in
big mode.

Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: fb32856b

 ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>