Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix to make sure features are detected before they are
   queried.

 - Intel IOMMU address alignment check fix for an IOLTB flushing
   command.

 - Performance fix for Intel IOMMU to make sure the code does not do
   full IOTLB flushes all the time. Those flushes are very expensive
   on emulated IOMMUs.

* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Do not use flush-queue when caching-mode is on
  iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
  iommu/amd: Use IVHD EFR for early initialization of IOMMU features

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the 'kexec jump' code and address a possible
  hibernation image creation issue.

  Specifics:

   - Fix a deadlock caused by attempting to acquire the same mutex twice
     in a row in the "kexec jump" code (Baoquan He)

   - Modify the hibernation image saving code to flush the unwritten
     data to the swap storage later so as to avoid failing to write the
     image signature which is possible in some cases (Laurent Badel)"

* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: flush swap writer after marking
  kernel: kexec: remove the lock operation of system_transition_mutex

Pull ACPI fixes from Rafael Wysocki:
 "These fix the handling of notifications in the ACPI thermal driver and
  address a device enumeration issue leading to the presence of multiple
  'MODALIAS=' entries in one uevent file in sysfs in some cases.

  Specifics:

   - Modify the ACPI thermal driver to avoid evaluating _TMP directly in
     its Notify () handler callback and running too many thermal checks
     for one thermal zone at the same time so as to address a work item
     accumulation issue observed on some systems that fail to shut down
     as a result of it (Rafael Wysocki)

   - Modify the ACPI uevent file creation code to avoid putting multiple
     'MODALIAS=' entries in one uevent file in sysfs which breaks
     systemd-udevd (Kai-Heng Feng)"

* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Do not call acpi_thermal_check() directly
  ACPI: sysfs: Prefer "compatible" modalias

Pull drm fixes from Dave Airlie:
 "Weekly fixes for graphics, nothing too major, nouveau has a few
  regression fixes for various fallout from header changes previously,
  vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.

  All seems on course for a quieter rc7, fingers crossed.

  nouveau:
   - fix svm init conditions
   - fix nv50 modesetting regression
   - fix cursor plane modifiers
   - fix > 64x64 cursor regression

  vc4:
   - Fix LBM size calculation
   - Fix high resolutions for hvs5

  i915:
   - Fix ICL MG PHY vswing
   - Fix subplatform handling
   - Fix selftest memleak
   - Clear CACHE_MODE prior to clearing residuals
   - Always flush the active worker before returning from the wait
   - Always try to reserve GGTT address 0x0

  amdgpu:
   - Fix a fan control regression on some boards
   - Fix clang warning"

* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
  drm/nouveau/kms/nv50-: Report max cursor size to userspace
  drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
  drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
  drm/nouveau/dispnv50: Restore pushing of all data.
  amdgpu: fix clang build warning
  Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
  drm/i915/gt: Always try to reserve GGTT address 0x0
  drm/i915: Always flush the active worker before returning from the wait
  drm/i915/selftest: Fix potential memory leak
  drm/i915: Check for all subplatform bits
  drm/i915: Fix ICL MG PHY vswing handling
  drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
  drm/vc4: Correct POS1_SCL for hvs5
  drm/vc4: Correct lbm size and calculation
  drm/nouveau/nvif: fix method count when pushing an array

It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).

That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).

This subtly broke the tty conversion to write_iter in commit
9bb48c82 ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.

The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.

Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer.  Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.

Fixes: 9bb48c82 ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-sysfs:
  ACPI: sysfs: Prefer "compatible" modalias

Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fix from Tyler Hicks:
 "Fix a regression that resulted in two rounds of UID translations when
  setting v3 namespaced file capabilities in some configurations"

* tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: fix uid translation for setxattr on security.capability

Merge tag 'amd-drm-fixes-5.11-2021-01-28' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-5.11-2021-01-28:

amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-01-28' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

drm/i915 fixes for v5.11-rc6:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com

Short summary of fixes pull (less than what git shortlog provides):

 * drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g

Mostly a regression fixes here, a couple of which could lead to
display hanging, and have been affecting a number of users.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com

While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.

This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a9 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Nvidia hardware doesn't actually support using tiling formats with the
cursor plane, only linear is allowed. In the future, we should write a
testcase for this.

Fixes: c586f30b ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Cc: James Jones <jajones@nvidia.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.

Fixes: eeaf06ac ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Commit f844eb48 introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.

In the changes of f844eb48 only the first line
was correctly translated to the new NVIDIA header macros:

-		PUSH_NVSQ(push, NV827C, 0x0110, 0,
-					0x0114, 0);
+		PUSH_MTHD(push, NV827C, SET_PROCESSING,
+			  NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));

The lower part ("0x0114, 0") was probably omitted by accident.

This patch restores the push of the missing data and fixes the regression.

Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb48 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14


Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes including fixes from can, xfrm, wireless,
  wireless-drivers and netfilter trees. Nothing scary, Intel
  WiFi-related fixes seemed most notable to the users.

  Current release - regressions:

   - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
     CPU port correctly

  Current release - new code bugs:

   - iwlwifi: pcie: reschedule in long-running memory reads

  Previous releases - regressions:

   - iwlwifi: dbg: don't try to overwrite read-only FW data

   - iwlwifi: provide gso_type to GSO packets

   - octeontx2: make sure the buffer is 128 byte aligned

   - tcp: make TCP_USER_TIMEOUT accurate for zero window probes

   - xfrm: fix wraparound in xfrm_policy_addr_delta()

   - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
     CPUs in presence of packet reorder

   - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
     OPEN

   - wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

  Previous releases - always broken:

   - igc: fix link speed advertising

   - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
     addressing

   - team: protect features update by RCU to avoid deadlock

   - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
     themselves

   - fec: fix temporary RMII clock reset on link up

   - can: dev: prevent potential information leak in can_fill_info()

  Misc:

   - mrp: fix bad packing of MRP test packet structures

   - uapi: fix big endian definition of ipv6_rpl_sr_hdr

   - add David Ahern to IPv4/IPv6 maintainers"

* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  rxrpc: Fix memory leak in rxrpc_lookup_local
  mlxsw: spectrum_span: Do not overwrite policer configuration
  selftests: forwarding: Specify interface when invoking mausezahn
  stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
  net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
  ibmvnic: Ensure that CRQ entry read are correctly ordered
  MAINTAINERS: add missing header for bonding
  net: decnet: fix netdev refcount leaking on error path
  net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
  can: dev: prevent potential information leak in can_fill_info()
  net: fec: Fix temporary RMII clock reset on link up
  net: lapb: Add locking to the lapb module
  team: protect features update by RCU to avoid deadlock
  MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
  net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
  net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
  net/mlx5e: Revert parameters on errors when changing trust state without reset
  net/mlx5e: Correctly handle changing the number of queues when the interface is down
  net/mlx5e: Fix CT rule + encap slow path offload and deletion
  net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
  ...

Commit 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

	struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
	-               peer->local = local;
	+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by:  <syzbot+305326672fed51b205f7@syzkaller.appspotmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Various fixes

Patch #1 fixes wrong invocation of mausezahn in a couple of selftests.
The tests started failing after Fedora updated their libnet package from
version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet
version.

Patch #2 fixes an issue in the mirroring to CPU code that results in
policer configuration being overwritten.
====================

Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d10 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d87 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4 ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lsusb -v for this device:

Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x0069
  bcdDevice            0.00
  iManufacturer           4 Cinterion Wireless Modules
  iProduct                3 PLSx3
  iSerial                 5 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          352
    bNumInterfaces         10
    bConfigurationValue     1
    iConfiguration          2 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         8
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       0
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 00A0C6C14190
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull locking fixes from Thomas Gleixner:
 "A set of PI futex fixes:

   - Address a longstanding issue where the user space part of the PI
     futex is not writeable. The kernel returns with inconsistent state
     which can in the worst case result in a UAF of a tasks kernel
     stack.

     The solution is to establish consistent kernel state which makes
     future operations on the futex fail because user space and kernel
     space state are inconsistent. Not a problem as PI futexes
     fundamentaly require a functional RW mapping and if user space
     pulls the rug under it, then it can keep the pieces it asked for.

   - Address an issue where the return value is incorrect in case that
     the futex was acquired after a timeout/signal made the waiter drop
     out of the rtmutex wait.

     In one of the corner cases the kernel returned an error code
     despite having successfully acquired the futex"

* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle faults correctly for PI futexes
  futex: Simplify fixup_pi_state_owner()
  futex: Use pi_state_update_owner() in put_pi_state()
  rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
  futex: Provide and use pi_state_update_owner()
  futex: Replace pointless printk in fixup_owner()
  futex: Ensure the correct return value from futex_lock_pi()

clang warns about the -mhard-float command line arguments
on architectures that do not support this:

clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]

Move this into the gcc-specific arguments.

Fixes: e77165bf ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11.  The follow on patch
fixes this properly for 5.12.

This reverts commit 8d6e65ad.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408


Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pull xen fixes from Juergen Gross:

 - A fix for a regression introduced in 5.11 resulting in Xen dom0
   having problems to correctly initialize Xenstore.

 - A fix for avoiding WARN splats when booting as Xen dom0 with
   CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the
   #VC exception (even if the handler should never be called).

 - A fix for the Xen bklfront driver adapting to the correct but
   unexpected behavior of new qemu.

* tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled
  xen: Fix XenStore initialisation for XS_LOCAL
  xen-blkfront: allow discard-* nodes to be optional

Merge tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull ia64 fixes from Arnd Bergmann:
 "asm-generic/ia64 fixes, and mark as orphaned

  Commit 2b49ddce ("ia64: convert to legacy_timer_tick") from my
  timer series I merged through the asm-generic tree caused a regression
  on all ia64 machines, as bisected by Adrian Glaubitz.

  Tony Luck is no longer really working on ia64, so instead of merging
  the fix through his tree, we ended up deciding that I'd merge the fix
  myself along a patch to mark the architecture as Orphaned and a
  compile time warning fix I made while working on the regression"

[ HPE no longer accepts orders for new Itanium hardware, and Intel
  stopped accepting orders a year ago. While intel is still officially
  shipping chips until July 29, 2021, it's unlikely that any such orders
  actually exist.

  It's dead, Jim.
                     - Linus ]

* tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ia64: Mark architecture as orphaned
  ia64: fix xchg() warning
  ia64: fix timer cleanup regression

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the current arm-soc bug fixes for linux-5.11. I already
  merged a larger set that just came in during the past three days but
  has not had much exposure in linux-next, but this is the subset I
  merged last week.

  Most of these are for the NXP i.MX platform (descriptions from their
  pull request):

   - Fix pcf2127 reset for imx7d-flex-concentrator board.
   - Fix i.MX6 suspend with Thumb-2 kernel.
   - Fix ethernet-phy address issue on imx6qdl-sr-som board.
   - Fix GPIO3 `gpio-ranges` on i.MX8MP.
   - Select SOC_BUS for IMX_SCU driver to fix build issue.
   - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
     #pwm-cells conversion.
   - Fix duplicated bus node name for i.MX8MN SoC.
   - Fix reset register offset on LS1028A SoC.
   - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
     index consistent with previous kernel version.
   - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
     failure with i.MX8M SoC driver.
   - Fix typos with status property on imx6qdl-kontron-samx6i board.
   - Fix duplicated regulator-name on imx6qdl-gw52xx board.

  Aside from i.MX, the bugfixes are all over the place:

   - Coccinelle found a refcount imbalance on integrator
   - defconfig fix for TI K3
   - A boot regression fix for ST ux500
   - A code preemption fix for the optee driver
   - USB DMA regression on Broadcom Stingray
   - A bogus boot time warning fix for at91 code"

* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Include bcm2835 subsequents into search
  arm64: dts: broadcom: Fix USB DMA address translation for Stingray
  drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
  drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
  tee: optee: replace might_sleep with cond_resched
  firmware: imx: select SOC_BUS to fix firmware build
  arm64: dts: imx8mp: Correct the gpio ranges of gpio3
  ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
  ARM: imx: build suspend-imx6.S with arm instruction set
  ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
  ARM: dts: ux500: Reserve memory carveouts
  arm64: defconfig: Drop unused K3 SoC specific options
  bus: arm-integrator-lm: Add of_node_put() before return statement
  ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
  ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
  ARM: imx: fix imx8m dependencies
  ARM: dts: tbs2910: rename MMC node aliases
  arm64: dts: ls1028a: fix the offset of the reset register
  arm64: dts: imx8mn: Fix duplicate node name
  ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight

Pull rdma fixes from Jason Gunthorpe:
 "Several recent regressions and some bug fixes:

   - Typo corrupting the max_recv_sge for cxgb4

   - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma

   - Sleeping inside a spinlock in hns

   - Revert the attempt to fix devlink deadlocks as the fix is more buggy

   - Typo in sysfs_emit_at conversions

   - Revert the removal of VLAN support in rxe"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  Revert "RDMA/rxe: Remove VLAN code leftovers from RXE"
  RDMA/usnic: Fix misuse of sysfs_emit_at
  Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"
  RDMA/hns: Use mutex instead of spinlock for ida allocation
  RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC
  RDMA/cxgb4: Fix the reported max_recv_sge value

Pull HID fixes from Jiri Kosina:

 - NULL pointer dereference regression fix for Wacom driver (Jason
   Gerecke)

 - functional regression fix for pam handling on some Elan and Synaptics
   touchpads (Kai-Heng Feng)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Correct NULL dereference on AES pen proximity
  HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices

Pull media fixes from Mauro Carvalho Chehab:

 - a V4L2 core regression at videobuf2 when checking for single-plane
   dmabuf

 - a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT()
   macro is not available in userspace

 - fix some regressions at RC core due to the usage of microseconds
   everywhere on it

 - a fix for a race condition at RC core

 - a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate),
   currently used only by a single driver

 - Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus,
   and cec drivers.

* tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: hantro: Fix reset_raw_fmt initialization
  media: cec: add stm32 driver
  media: cedrus: Fix H264 decoding
  media: v4l2-subdev.h: BIT() is not available in userspace
  media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"
  media: rc: ite-cir: fix min_timeout calculation
  media: venus: core: Fix platform driver shutdown
  media: rc: fix timeout handling after switch to microsecond durations
  media: v4l: common: Fix naming of v4l2_get_link_rate
  media: rcar-vin: fix return, use ret instead of zero
  media: ccs: Get static data version minor correctly
  media: ccs-pll: Fix link frequency for C-PHY
  media: rc: ensure that uevent can be read directly after rc device register

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Build fix for CONFIG_PM=n in the mmp2 driver

   - Kconfig warning for unmet dependencies in the i.MX driver

   - Make the camera AHB clk always be enabled on qcom sc7180

   - Use rate round down semantics for qcom sm8250 SD clks"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mmp2: fix build without CONFIG_PM
  clk: qcom: gcc-sm250: Use floor ops for sdcc clks
  clk: imx: fix Kconfig warning for i.MX SCU clk
  clk: qcom: gcc-sc7180: Mark the camera abh clock always ON

Pull sound fixes from Takashi Iwai:
 "Although the incoming fixes haven't settled down yet, all changes here
  are small and mostly device-specific fixes, so nothing look worrisome.

   - Yet another USB-audio regression fixes

   - HD-audio ID fix and device-specific quirks

   - SOF Intel / SoundWire fixes including topology

   - ASoC Qualcomm and Mediatek fixes"

* tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda/via: Apply the workaround generically for Clevo machines
  ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E
  ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
  ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682
  ASoC: ak4458: correct reset polarity
  ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
  ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
  ALSA: hda: intel-dsp-config: add PCI id for TGL-H
  ALSA: usb-audio: workaround for iface reset issue
  ALSA: pcm: One more dependency for hw constraints
  ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256
  ASoC: Intel: Skylake: Zero snd_ctl_elem_value
  ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete
  ASoC: qcom: Fix number of HDMI RDMA channels on sc7180
  ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default
  ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
  ASoC: topology: Properly unregister DAI on removal
  ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()
  ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field
  ASoC: AMD Renoir - refine DMI entries for some Lenovo products
  ...

This reverts commit dde3c6b7.

syzbot report a double-free bug. The following case can cause this bug.

 - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
   it does:

	out_free_cache:
		kmem_cache_free(kmem_cache, s);

 - but __kmem_cache_create() - at least for slub() - will have done

	sysfs_slab_add(s)
		-> sysfs_create_group() .. fails ..
		-> kobject_del(&s->kobj); .. which frees s ...

We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.

So, revert the commit dde3c6b7 ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.

Reported-by:  <syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com>
Fixes: dde3c6b7 ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When an Intel IOMMU is virtualized, and a physical device is
passed-through to the VM, changes of the virtual IOMMU need to be
propagated to the physical IOMMU. The hypervisor therefore needs to
monitor PTE mappings in the IOMMU page-tables. Intel specifications
provide "caching-mode" capability that a virtual IOMMU uses to report
that the IOMMU is virtualized and a TLB flush is needed after mapping to
allow the hypervisor to propagate virtual IOMMU mappings to the physical
IOMMU. To the best of my knowledge no real physical IOMMU reports
"caching-mode" as turned on.

Synchronizing the virtual and the physical IOMMU tables is expensive if
the hypervisor is unaware which PTEs have changed, as the hypervisor is
required to walk all the virtualized tables and look for changes.
Consequently, domain flushes are much more expensive than page-specific
flushes on virtualized IOMMUs with passthrough devices. The kernel
therefore exploited the "caching-mode" indication to avoid domain
flushing and use page-specific flushing in virtualized environments. See
commit 78d5f0f5 ("intel-iommu: Avoid global flushes with caching
mode.")

This behavior changed after commit 13cf0174 ("iommu/vt-d: Make use
of iova deferred flushing"). Now, when batched TLB flushing is used (the
default), full TLB domain flushes are performed frequently, requiring
the hypervisor to perform expensive synchronization between the virtual
TLB and the physical one.

Getting batched TLB flushes to use page-specific invalidations again in
such circumstances is not easy, since the TLB invalidation scheme
assumes that "full" domain TLB flushes are performed for scalability.

Disable batched TLB flushes when caching-mode is on, as the performance
benefit from using batched TLB invalidations is likely to be much
smaller than the overhead of the virtual-to-physical IOMMU page-tables
synchronization.

Fixes: 13cf0174 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org

Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com


Signed-off-by: Joerg Roedel <jroedel@suse.de>

An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid()
to check the address alignment. This leads to a lot of spurious kernel
warnings:

[  485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[  485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[  492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed
[  492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11
[  492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11

Fix it by checking the alignment in right way.

Fixes: 288d08e7 ("iommu/vt-d: Handle non-page aligned address")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com


Signed-off-by: Joerg Roedel <jroedel@suse.de>

IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.

However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")

Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.

Fixes: 6d39bdee ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com


Signed-off-by: Joerg Roedel <jroedel@suse.de>

Saeed Mahameed says:

====================
mlx5 fixes 2021-01-26

This series introduces some fixes to mlx5 driver.

* tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
  net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
  net/mlx5e: Revert parameters on errors when changing trust state without reset
  net/mlx5e: Correctly handle changing the number of queues when the interface is down
  net/mlx5e: Fix CT rule + encap slow path offload and deletion
  net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
  net/mlx5: Maintain separate page trees for ECPF and PF functions
  net/mlx5e: Fix IPSEC stats
  net/mlx5e: Reduce tc unsupported key print level
  net/mlx5e: free page before return
  net/mlx5e: E-switch, Fix rate calculation for overflow
  net/mlx5: Fix memory leak on flow table creation error flow
====================

Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>