Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Pull s390 fixes from Vasily Gorbik:

 - Fix max number of VCPUs reported via ultravisor information sysfs
   interface.

 - Fix memory leaks during vfio-ap resources clean up on KVM pointer
   invalidation notification.

 - Fix potential specification exception by avoiding unnecessary
   interrupts disable after queue reset in vfio-ap.

* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: uv: Fix sysfs max number of VCPUs reporting
  s390/vfio-ap: No need to disable IRQ after queue reset
  s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated

Pull RISC-V fix from Palmer Dabbelt:
 "A fix to avoid initializing max_mapnr to be too large, which may
  manifest on NUMA systems"

* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup pfn_valid error with wrong max_mapnr

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

Pull arm64 fixes from Catalin Marinas:

 - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.

 - Do not blindly trust the DMA masks from ACPI/IORT.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Do not blindly trust DMA masks from firmware
  arm64: Fix kernel address detection of __is_lm_address()

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion

Pull block fixes from Jens Axboe:
 "All over the place fixes for this release:

   - blk-cgroup iteration teardown resched fix (Baolin)

   - NVMe pull request from Christoph:
        - add another Write Zeroes quirk (Chaitanya Kulkarni)
        - handle a no path available corner case (Daniel Wagner)
        - use the proper RCU aware list_add helper (Chao Leng)

   - bcache regression fix (Coly)

   - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
     but for now, we'll make it IRQ safe (Damien)

   - null_blk zoned init fix (Damien)

   - add_partition() error handling fix (Dinghao)

   - s390 dasd kobject fix (Jan)

   - nbd fix for freezing queue while adding connections (Josef)

   - tag queueing regression fix (Ming)

   - revert of a patch that inadvertently meant that we regressed write
     performance on raid (Maxim)"

* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  null_blk: cleanup zoned mode initialization
  nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
  nvme-multipath: Early exit if no path is available
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
  bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
  block: fix bd_size_lock use
  blk-cgroup: Use cond_resched() when destroy blkgs
  Revert "block: simplify set_init_blocksize" to regain lost performance
  nbd: freeze the queue while we're adding connections
  s390/dasd: Fix inconsistent kobject removal
  block: Fix an error handling in add_partition
  blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue

Pull io_uring fixes from Jens Axboe:
 "We got the cancelation story sorted now, so for all intents and
  purposes, this should be it for 5.11 outside of any potential little
  fixes that may come in. This contains:

   - task_work task state fixes (Hao, Pavel)

   - Cancelation fixes (me, Pavel)

   - Fix for an inflight req patch in this release (Pavel)

   - Fix for a lock deadlock issue (Pavel)"

* tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  io_uring: reinforce cancel on flush during exit
  io_uring: fix sqo ownership false positive warning
  io_uring: fix list corruption for splice file_get
  io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE
  io_uring: fix wqe->lock/completion_lock deadlock
  io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE
  io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE
  io_uring: only call io_cqring_ev_posted() if events were posted
  io_uring: if we see flush on exit, cancel related tasks

Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix to make sure features are detected before they are
   queried.

 - Intel IOMMU address alignment check fix for an IOLTB flushing
   command.

 - Performance fix for Intel IOMMU to make sure the code does not do
   full IOTLB flushes all the time. Those flushes are very expensive
   on emulated IOMMUs.

* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Do not use flush-queue when caching-mode is on
  iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
  iommu/amd: Use IVHD EFR for early initialization of IOMMU features

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the 'kexec jump' code and address a possible
  hibernation image creation issue.

  Specifics:

   - Fix a deadlock caused by attempting to acquire the same mutex twice
     in a row in the "kexec jump" code (Baoquan He)

   - Modify the hibernation image saving code to flush the unwritten
     data to the swap storage later so as to avoid failing to write the
     image signature which is possible in some cases (Laurent Badel)"

* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: flush swap writer after marking
  kernel: kexec: remove the lock operation of system_transition_mutex

Pull ACPI fixes from Rafael Wysocki:
 "These fix the handling of notifications in the ACPI thermal driver and
  address a device enumeration issue leading to the presence of multiple
  'MODALIAS=' entries in one uevent file in sysfs in some cases.

  Specifics:

   - Modify the ACPI thermal driver to avoid evaluating _TMP directly in
     its Notify () handler callback and running too many thermal checks
     for one thermal zone at the same time so as to address a work item
     accumulation issue observed on some systems that fail to shut down
     as a result of it (Rafael Wysocki)

   - Modify the ACPI uevent file creation code to avoid putting multiple
     'MODALIAS=' entries in one uevent file in sysfs which breaks
     systemd-udevd (Kai-Heng Feng)"

* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Do not call acpi_thermal_check() directly
  ACPI: sysfs: Prefer "compatible" modalias

Pull drm fixes from Dave Airlie:
 "Weekly fixes for graphics, nothing too major, nouveau has a few
  regression fixes for various fallout from header changes previously,
  vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.

  All seems on course for a quieter rc7, fingers crossed.

  nouveau:
   - fix svm init conditions
   - fix nv50 modesetting regression
   - fix cursor plane modifiers
   - fix > 64x64 cursor regression

  vc4:
   - Fix LBM size calculation
   - Fix high resolutions for hvs5

  i915:
   - Fix ICL MG PHY vswing
   - Fix subplatform handling
   - Fix selftest memleak
   - Clear CACHE_MODE prior to clearing residuals
   - Always flush the active worker before returning from the wait
   - Always try to reserve GGTT address 0x0

  amdgpu:
   - Fix a fan control regression on some boards
   - Fix clang warning"

* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
  drm/nouveau/kms/nv50-: Report max cursor size to userspace
  drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
  drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
  drm/nouveau/dispnv50: Restore pushing of all data.
  amdgpu: fix clang build warning
  Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
  drm/i915/gt: Always try to reserve GGTT address 0x0
  drm/i915: Always flush the active worker before returning from the wait
  drm/i915/selftest: Fix potential memory leak
  drm/i915: Check for all subplatform bits
  drm/i915: Fix ICL MG PHY vswing handling
  drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
  drm/vc4: Correct POS1_SCL for hvs5
  drm/vc4: Correct lbm size and calculation
  drm/nouveau/nvif: fix method count when pushing an array

It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).

That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).

This subtly broke the tty conversion to write_iter in commit
9bb48c82 ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.

The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.

Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer.  Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.

Fixes: 9bb48c82

 ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-sysfs:
  ACPI: sysfs: Prefer "compatible" modalias

To avoid potential compilation problems, replaced the badly written
MB_TO_SECTS() macro (missing parenthesis around the argument use) with
the inline function mb_to_sects(). And while at it, simplify the
calculation of the total number of zones of the device using the
round_up() macro.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fix from Tyler Hicks:
 "Fix a regression that resulted in two rounds of UID translations when
  setting v3 namespaced file capabilities in some configurations"

* tag 'ecryptfs-5.11-rc6-setxattr-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: fix uid translation for setxattr on security.capability

Merge tag 'amd-drm-fixes-5.11-2021-01-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.11-2021-01-28:

amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128191558.3821-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-01-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.11-rc6:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2gdi3mp.fsf@intel.com

Short summary of fixes pull (less than what git shortlog provides):

 * drm/vc4: Fix LBM size calculation; Fix high resolutions for hvs5

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YBEco1Vxeny8U/ca@linux-uq9g

Mostly a regression fixes here, a couple of which could lead to
display hanging, and have been affecting a number of users.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4Y0ZiAevSvgphLAOaZjFi75ECXqUD9ShBvRxZ6S-pb9Q@mail.gmail.com

While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.

This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a9

 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Nvidia hardware doesn't actually support using tiling formats with the
cursor plane, only linear is allowed. In the future, we should write a
testcase for this.

Fixes: c586f30b

 ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Cc: James Jones <jajones@nvidia.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: James Jones <jajones@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.

Fixes: eeaf06ac

 ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Commit f844eb48 introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.

In the changes of f844eb48

 only the first line
was correctly translated to the new NVIDIA header macros:

-		PUSH_NVSQ(push, NV827C, 0x0110, 0,
-					0x0114, 0);
+		PUSH_MTHD(push, NV827C, SET_PROCESSING,
+			  NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));

The lower part ("0x0114, 0") was probably omitted by accident.

This patch restores the push of the missing data and fixes the regression.

Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb48

 ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

What 84965ff8

 ("io_uring: if we see flush on exit, cancel related tasks")
really wants is to cancel all relevant REQ_F_INFLIGHT requests reliably.
That can be achieved by io_uring_cancel_files(), but we'll miss it
calling io_uring_cancel_task_requests(files=NULL) from io_uring_flush(),
because it will go through __io_uring_cancel_task_requests().

Just always call io_uring_cancel_files() during cancel, it's good enough
for now.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes including fixes from can, xfrm, wireless,
  wireless-drivers and netfilter trees. Nothing scary, Intel
  WiFi-related fixes seemed most notable to the users.

  Current release - regressions:

   - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
     CPU port correctly

  Current release - new code bugs:

   - iwlwifi: pcie: reschedule in long-running memory reads

  Previous releases - regressions:

   - iwlwifi: dbg: don't try to overwrite read-only FW data

   - iwlwifi: provide gso_type to GSO packets

   - octeontx2: make sure the buffer is 128 byte aligned

   - tcp: make TCP_USER_TIMEOUT accurate for zero window probes

   - xfrm: fix wraparound in xfrm_policy_addr_delta()

   - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
     CPUs in presence of packet reorder

   - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
     OPEN

   - wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

  Previous releases - always broken:

   - igc: fix link speed advertising

   - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
     addressing

   - team: protect features update by RCU to avoid deadlock

   - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
     themselves

   - fec: fix temporary RMII clock reset on link up

   - can: dev: prevent potential information leak in can_fill_info()

  Misc:

   - mrp: fix bad packing of MRP test packet structures

   - uapi: fix big endian definition of ipv6_rpl_sr_hdr

   - add David Ahern to IPv4/IPv6 maintainers"

* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  rxrpc: Fix memory leak in rxrpc_lookup_local
  mlxsw: spectrum_span: Do not overwrite policer configuration
  selftests: forwarding: Specify interface when invoking mausezahn
  stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
  net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
  ibmvnic: Ensure that CRQ entry read are correctly ordered
  MAINTAINERS: add missing header for bonding
  net: decnet: fix netdev refcount leaking on error path
  net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
  can: dev: prevent potential information leak in can_fill_info()
  net: fec: Fix temporary RMII clock reset on link up
  net: lapb: Add locking to the lapb module
  team: protect features update by RCU to avoid deadlock
  MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
  net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
  net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
  net/mlx5e: Revert parameters on errors when changing trust state without reset
  net/mlx5e: Correctly handle changing the number of queues when the interface is down
  net/mlx5e: Fix CT rule + encap slow path offload and deletion
  net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
  ...

Commit 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

	struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
	-               peer->local = local;
	+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef

 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by:  <syzbot+305326672fed51b205f7@syzkaller.appspotmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Various fixes

Patch #1 fixes wrong invocation of mausezahn in a couple of selftests.
The tests started failing after Fedora updated their libnet package from
version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet
version.

Patch #2 fixes an issue in the mirroring to CPU code that results in
policer configuration being overwritten.
====================

Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e

 ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d10 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d87

 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4

 ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

lsusb -v for this device:

Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x0069
  bcdDevice            0.00
  iManufacturer           4 Cinterion Wireless Modules
  iProduct                3 PLSx3
  iSerial                 5 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          352
    bNumInterfaces         10
    bConfigurationValue     1
    iConfiguration          2 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         8
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       0
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 00A0C6C14190
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull locking fixes from Thomas Gleixner:
 "A set of PI futex fixes:

   - Address a longstanding issue where the user space part of the PI
     futex is not writeable. The kernel returns with inconsistent state
     which can in the worst case result in a UAF of a tasks kernel
     stack.

     The solution is to establish consistent kernel state which makes
     future operations on the futex fail because user space and kernel
     space state are inconsistent. Not a problem as PI futexes
     fundamentaly require a functional RW mapping and if user space
     pulls the rug under it, then it can keep the pieces it asked for.

   - Address an issue where the return value is incorrect in case that
     the futex was acquired after a timeout/signal made the waiter drop
     out of the rtmutex wait.

     In one of the corner cases the kernel returned an error code
     despite having successfully acquired the futex"

* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle faults correctly for PI futexes
  futex: Simplify fixup_pi_state_owner()
  futex: Use pi_state_update_owner() in put_pi_state()
  rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
  futex: Provide and use pi_state_update_owner()
  futex: Replace pointless printk in fixup_owner()
  futex: Ensure the correct return value from futex_lock_pi()

Pull NVMe fixes from Christoph:

"nvme fixes for 5.11:

 - add another Write Zeroes quirk (Chaitanya Kulkarni)
 - handle a no path available corner case (Daniel Wagner)
 - use the proper RCU aware list_add helper (Chao Leng)"

* tag 'nvme-5.11-2021-01-28' of git://git.infradead.org/nvme:
  nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
  nvme-multipath: Early exit if no path is available
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device

WARNING: CPU: 0 PID: 21359 at fs/io_uring.c:9042
    io_uring_cancel_task_requests+0xe55/0x10c0 fs/io_uring.c:9042
Call Trace:
 io_uring_flush+0x47b/0x6e0 fs/io_uring.c:9227
 filp_close+0xb4/0x170 fs/open.c:1295
 close_files fs/file.c:403 [inline]
 put_files_struct fs/file.c:418 [inline]
 put_files_struct+0x1cc/0x350 fs/file.c:415
 exit_files+0x7e/0xa0 fs/file.c:435
 do_exit+0xc22/0x2ae0 kernel/exit.c:820
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x427/0x20f0 kernel/signal.c:2773
 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
 handle_signal_work kernel/entry/common.c:147 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Now io_uring_cancel_task_requests() can be called not through file
notes but directly, remove a WARN_ONCE() there that give us false
positives. That check is not very important and we catch it in other
places.

Fixes: 84965ff8

 ("io_uring: if we see flush on exit, cancel related tasks")
Cc: stable@vger.kernel.org # 5.9+
Reported-by:  <syzbot+3e3d9bd0c6ce9efbc3ef@syzkaller.appspotmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

kernel BUG at lib/list_debug.c:29!
Call Trace:
 __list_add include/linux/list.h:67 [inline]
 list_add include/linux/list.h:86 [inline]
 io_file_get+0x8cc/0xdb0 fs/io_uring.c:6466
 __io_splice_prep+0x1bc/0x530 fs/io_uring.c:3866
 io_splice_prep fs/io_uring.c:3920 [inline]
 io_req_prep+0x3546/0x4e80 fs/io_uring.c:6081
 io_queue_sqe+0x609/0x10d0 fs/io_uring.c:6628
 io_submit_sqe fs/io_uring.c:6705 [inline]
 io_submit_sqes+0x1495/0x2720 fs/io_uring.c:6953
 __do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9353
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

io_file_get() may be called from splice, and so REQ_F_INFLIGHT may
already be set.

Fixes: 02a13674

 ("io_uring: account io_uring internal files as REQ_F_INFLIGHT")
Cc: stable@vger.kernel.org # 5.9+
Reported-by:  <syzbot+6879187cf57845801267@syzkaller.appspotmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

clang warns about the -mhard-float command line arguments
on architectures that do not support this:

clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]

Move this into the gcc-specific arguments.

Fixes: e77165bf

 ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On some boards the rpm interface apparently does not work at all
leading to the fan not spinning or spinning at strange speeds.
Revert this for now to fix 5.10, 5.11.  The follow on patch
fixes this properly for 5.12.

This reverts commit 8d6e65ad

.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1408
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The "list" of nvme_ns_head is used as rcu list, now in nvme_init_ns_head
list_add_tail is used to add ns->siblings to the rcu list. It is not safe.
Should use list_add_tail_rcu instead of list_add_tail.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>