- May 03, 2018
-
-
Eric Dumazet authored
Normally, a socket can not be freed/reused unless all its TX packets left qdisc and were TX-completed. However connect(AF_UNSPEC) allows this to happen. With commit fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") we cleared f->time_next_packet but took no special action if the flow was still in the throttled rb-tree. Since f->time_next_packet is the key used in the rb-tree searches, blindly clearing it might break rb-tree integrity. We need to make sure the flow is no longer in the rb-tree to avoid this problem. Fixes: fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6"). Eric reported a division by zero in rt6_multipath_rebalance() which is caused by above commit that considers identical local routes to be siblings. The division by zero happens because a nexthop weight is not set for local routes. Revert the commit as it does not fix a bug and has side effects. To reproduce: # ip -6 address add 2001:db8::1/64 dev dummy0 # ip -6 address add 2001:db8::1/64 dev dummy1 Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
The smc_poll code tries to finish connect() if the socket is in state SMC_INIT and polling of the internal CLC-socket returns with EPOLLOUT. This makes sense for a select/poll call following a connect call, but not without preceding connect(). With this patch smc_poll starts connect logic only, if the CLC-socket is no longer in its initial state TCP_CLOSE. In addition, a poll error on the internal CLC-socket is always propagated to the SMC socket. With this patch the code path mentioned by syzbot https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396 is no longer possible. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Reported-by:
<syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ingo Molnar authored
Use disable_irq_nosync() instead of disable_irq() as this might be called in atomic context with netpoll. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 02, 2018
-
-
Xin Long authored
When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk. However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed. This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer(). Fixes: 26b87c78 ("net: sctp: fix remote memory pressure from excessive queueing") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When processing a duplicate cookie-echo chunk, for case 'D', sctp will not process the param from this chunk. It means old asoc has nothing to be updated, and the new temp asoc doesn't have the complete info. So there's no reason to use the new asoc when creating the cookie-ack chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk can not be set with auth, and it will definitely be dropped by peer. This issue is there since very beginning, and we fix it by using the old asoc instead. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When processing a duplicate cookie-echo chunk, for case 'A' and 'B', after sctp_process_init for the new asoc, if auth is enabled for the cookie-ack chunk, the active key should also be initialized. Otherwise, the cookie-ack chunk made later can not be set with auth shkey properly, and a crash can even be caused by this, as after Commit 1b1e0bc9 ("sctp: add refcnt support for sh_key"), sctp needs to hold the shkey when making control chunks. Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Previously the bbr->idle_restart tracking was zeroing out the bbr->idle_restart bit upon ACKs that did not SACK or ACK anything, e.g. receiving incoming data or receiver window updates. In such situations BBR would forget that this was a restart-from-idle situation, and if the min_rtt had expired it would unnecessarily enter PROBE_RTT (even though we were actually restarting from idle but had merely forgotten that fact). The fix is simple: we need to remember we are restarting from idle until we receive a S/ACK for some data (a S/ACK for the first flight of data we send as we are restarting). This commit is a stable candidate for kernels back as far as 4.9. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
In dual_mac mode packets arrived on one port should not be forwarded by switch hw to another port. Only Linux Host can forward packets between ports. The below test case (reported in [1]) shows that packet arrived on one port can be leaked to anoter (reproducible with dual port evms): - connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark - connect port 2 (eth1) to linux Host 1 with vlan 1 configured - ping <IPx> from Host 1 through vlan 1 interface. ARP packets will be seen on Host 0. Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port 1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for each vlan. By default, the ALE will find valid vlan record in its table when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all ports which are vlan 1 members (like Port. To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will drop ingress packets if Rx port is not VLAN member. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
This reverts commit 93c0d549c4c5a7382ad70de6b86610b7aae57406. Unfortunately the padding will break 32 bit userspace. Ouch. Need to add some compat code, revert for now. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Hurley authored
Firmware requires that the ttl value for an encapsulating ipv4 tunnel header be included as an action field. Prior to the support of Geneve tunnel encap (when ttl set was removed completely), ttl value was extracted from the tunnel key. However, tests have shown that this can still produce a ttl of 0. Fix the issue by setting the namespace default value for each new tunnel. Follow up patch for net-next will do a full route lookup. Fixes: 3ca3059d ("nfp: flower: compile Geneve encap actions") Fixes: b27d6a95 ("nfp: compile flower vxlan tunnel set actions") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dave Watson authored
It is reported that in some cases, write_space may be called in do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again: [ 660.468802] ? do_tcp_sendpages+0x8d/0x580 [ 660.468826] ? tls_push_sg+0x74/0x130 [tls] [ 660.468852] ? tls_push_record+0x24a/0x390 [tls] [ 660.468880] ? tls_write_space+0x6a/0x80 [tls] ... tls_push_sg already does a loop over all sending sg's, so ignore any tls_write_space notifications until we are done sending. We then have to call the previous write_space to wake up poll() waiters after we are done with the send loop. Reported-by:
Andre Tomt <andre@tomt.net> Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Winter authored
It is valid to have static routes where the nexthop is an interface not an address such as tunnels. For IPv4 it was possible to use ECMP on these routes but not for IPv6. Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Cc: David Ahern <dsahern@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wenwen Wang authored
In ethtool_get_rxnfc(), the object "info" is firstly copied from user-space. If the FLOW_RSS flag is set in the member field flow_type of "info" (and cmd is ETHTOOL_GRXFH), info needs to be copied again from user-space because FLOW_RSS is newer and has new definition, as mentioned in the comment. However, given that the user data resides in user-space, a malicious user can race to change the data after the first copy. By doing so, the user can inject inconsistent data. For example, in the second copy, the FLOW_RSS flag could be cleared in the field flow_type of "info". In the following execution, "info" will be used in the function ops->get_rxnfc(). Such inconsistent data can potentially lead to unexpected information leakage since ops->get_rxnfc() will prepare various types of data according to flow_type, and the prepared data will be eventually copied to user-space. This inconsistent data may also cause undefined behaviors based on how ops->get_rxnfc() is implemented. This patch simply re-verifies the flow_type field of "info" after the second copy. If the value is not as expected, an error code will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistake in mlx4_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
There's a 32 bit hole just after type. It's best to give it a name, this way compiler is forced to initialize it with rest of the structure. Reported-by:
Kevin Easton <kevin@guarana.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out() with following C-repro : socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242 setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0 writev(3, [{"\270", 1}], 1) = 1 setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0 writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144 The 3rd system call looks odd : setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0 This patch makes sure bound checking is using an unsigned compare. Fixes: ee995283 ("tcp: Initial repair mode") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(), root caused to a bad assumption of ICMP header being already pulled in skb->head ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug. BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 23aebdac ("ipv6: Compute multipath hash for ICMP errors from offending packet") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jakub Sitnicki <jkbs@redhat.com> Acked-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 30, 2018
-
-
Colin Ian King authored
Trivial fix to spelling mistake in tx_fw_stat_gstrings text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_INFO message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in netdev_warn warning message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible. v1 -> v2: use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device. Reported-by:
<syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 28, 2018
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: more ARFS fixes A couple more bits of breakage in my recent ARFS and async filters work. Patch #1 in particular fixes a bug that leads to memory trampling and consequent crashes. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Owing to a missing conditional, the result of rps_may_expire_flow() was being ignored and filters were being removed even if we'd decided not to expire them. Fixes: f8d62037 ("sfc: ARFS filter IDs") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
efx->type->filter_insert() returns an ID rather than the index that efx->type->filter_async_insert() used to, which causes it to exceed efx->type->max_rx_ip_filters on some EF10 configurations, leading to out- of-bounds array writes. So, in efx_filter_rfs_work(), convert this back into an index (which is what the remove call in the expiry path expects, anyway). Fixes: 3af0f342 ("sfc: replace asynchronous filter operations") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lance Richardson authored
For the x32 ABI, struct timeval has two 64-bit fields. However the kernel currently interprets the user-space values used for the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair of 32-bit fields. When the seconds portion of the requested timeout is less than 2**32, the seconds portion of the effective timeout is correct but the microseconds portion is zero. When the seconds portion of the requested timeout is zero and the microseconds portion is non-zero, the kernel interprets the timeout as zero (never timeout). Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required for the ABI. The code included below demonstrates the problem. Results before patch: $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 2.008181 seconds send time: 2.015985 seconds $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 2.016763 seconds send time: 2.016062 seconds $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo recv time: 1.007239 seconds send time: 1.023890 seconds Results after patch: $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.010062 seconds send time: 2.015836 seconds $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.013974 seconds send time: 2.015981 seconds $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo recv time: 2.030257 seconds send time: 2.013383 seconds #include <stdio.h> #include <stdlib.h> #include <sys/socket.h> #include <sys/types.h> #include <sys/time.h> void checkrc(char *str, int rc) { if (rc >= 0) return; perror(str); exit(1); } static char buf[1024]; int main(int argc, char **argv) { int rc; int socks[2]; struct timeval tv; struct timeval start, end, delta; rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks); checkrc("socketpair", rc); /* set timeout to 1.999999 seconds */ tv.tv_sec = 1; tv.tv_usec = 999999; rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv); rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv); checkrc("setsockopt", rc); /* measure actual receive timeout */ gettimeofday(&start, NULL); rc = recv(socks[0], buf, sizeof buf, 0); gettimeofday(&end, NULL); timersub(&end, &start, &delta); printf("recv time: %ld.%06ld seconds\n", (long)delta.tv_sec, (long)delta.tv_usec); /* fill send buffer */ do { rc = send(socks[0], buf, sizeof buf, 0); } while (rc > 0); /* measure actual send timeout */ gettimeofday(&start, NULL); rc = send(socks[0], buf, sizeof buf, 0); gettimeofday(&end, NULL); timersub(&end, &start, &delta); printf("send time: %ld.%06ld seconds\n", (long)delta.tv_sec, (long)delta.tv_usec); exit(0); } Fixes: 515c7af8 ("x32: Use compat shims for {g,s}etsockopt") Reported-by:
Gopal RajagopalSai <gopalsr83@gmail.com> Signed-off-by:
Lance Richardson <lance.richardson.net@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
"./scripts/get_maintainer.pl -f" does not actually show us David as the maintainer of drivers/net directories such as team, bonding, phy or dsa. Adding him in an M: entry of NETWORKING DRIVERS fixes this. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-04-26 This pull request includes fixes for mlx5 core and netdev driver. Please pull and let me know if there's any problems. For -stable v4.12 net/mlx5e: TX, Use correct counter in dma_map error flow For -stable v4.13 net/mlx5: Avoid cleaning flow steering table twice during error flow For -stable v4.14 net/mlx5e: Allow offloading ipv4 header re-write for icmp For -stable v4.15 net/mlx5e: DCBNL fix min inline header size for dscp For -stable v4.16 net/mlx5: Fix mlx5_get_vector_affinity function ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2018-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 A few fixes for 4.17 but nothing really special. The new ETSI WMM parameter support for iwlwifi is not technically a bugfix but important for regulatory compliance. iwlwifi * use new ETSI WMM parameters from regulatory database * fix a regression with the older firmware API 31 (eg. 31.560484.0) brcmfmac * fix a double free in nvmam loading fails rtlwifi * yet another fix for ant_sel module parameter ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When IGMP snooping is enabled on a bridge, traffic forwarded by an MDB entry should be sent to both ports member in the MDB's ports list and mrouter ports. In case a port needs to be removed from an MDB's ports list, but this port is also configured as an mrouter port, then do not update the device so that it will continue to forward traffic through that port. Fix a copy-paste error that checked that IGMP snooping is enabled twice instead of checking the port's mrouter state. Fixes: ded711c8 ("mlxsw: spectrum_switchdev: Consider mrouter status for mdb changes") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Colin King <colin.king@canonical.com> Reviewed-by:
Nogah Frankel <nogahf@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When processing a duplicate cookie-echo chunk, sctp moves the new temp asoc's stream out/in into the old asoc, and later frees this new temp asoc. But now after this move, the new temp asoc's stream->outcnt is not cleared while stream->out is set to NULL, which would cause a same crash as the one fixed in Commit 79d08951 ("sctp: fix error path in sctp_stream_init") when freeing this asoc later. This fix is to clear this outcnt in sctp_stream_update. Fixes: f952be79 ("sctp: introduce struct sctp_stream_out_ext") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
SZ Lin (林上智) authored
This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Since sctp ipv6 socket also supports v4 addrs, it's possible to compare two v4 addrs in pf v6 .cmp_addr, sctp_inet6_cmp_addr. However after Commit 1071ec9d ("sctp: do not check port in sctp_inet6_cmp_addr"), it no longer calls af1->cmp_addr, which in this case is sctp_v4_cmp_addr, but calls __sctp_v6_cmp_addr where it handles them as two v6 addrs. It would cause a out of bounds crash. syzbot found this crash when trying to bind two v4 addrs to a v6 socket. This patch fixes it by adding the process for two v4 addrs in sctp_inet6_cmp_addr. Fixes: 1071ec9d ("sctp: do not check port in sctp_inet6_cmp_addr") Reported-by:
<syzbot+cd494c1dd681d4d93ebb@syzkaller.appspotmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
While adding the DSA notifier, we will be sending DSA notifications with info->master that is going to point to a particular net_device instance. Our logic in bcm_sysport_map_queues() correctly disambiguates net_device instances that are not covered by our own driver, but it will not make sure that info->master points to a particular driver instance that we are interested in. In a system where e.g: two or more SYSTEMPORT instances are registered, this would lead in programming two or more times the queue mapping, completely messing with the logic which does the queue/port allocation and tracking. Fix this by looking at the notifier_block pointer which is unique per instance and allows us to go back to our driver private structure, and in turn to the backing net_device instance. Fixes: d1565763 ("net: systemport: Establish lower/upper queue mapping") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anders Roxell authored
Script in_netns.sh is a utility function and not its own test so it shouldn't be part of the TEST_PROGS. The in_netns.sh get used by run_afpackettests. To install in_netns.sh without being added to the main run_kselftest.sh script use the TEST_GEN_PROGS_EXTENDED variable. Fixes: 5ff9c1a3 ("selftests: net: add in_netns.sh to TEST_PROGS") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 27, 2018
-
-
Yuchung Cheng authored
The TCP repair sequence of operation is to first set the socket in repair mode, then inject the TCP stats into the socket with repair socket options, then call connect() to re-activate the socket. The connect syscall simply returns and set state to ESTABLISHED mode. As a result Fast Open is meaningless for TCP repair. However allowing sendto() system call with MSG_FASTOPEN flag half-way during the repair operation could unexpectedly cause data to be sent, before the operation finishes changing the internal TCP stats (e.g. MSS). This in turn triggers TCP warnings on inconsistent packet accounting. The fix is to simply disallow Fast Open operation once the socket is in the repair mode. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Maxime Chevallier says: ==================== net: mvpp2: Fix hangs when starting some interfaces on 7k/8k Armada 7K / 8K clock management has recently been reworked, see : commit c7e92def ("clk: mvebu: cp110: Fix clock tree representation") I have been experiencing overall system hangs on MacchiatoBin when starting the eth1 interface since then. It turns out some clocks dependencies were missing in the PPv2 and xmdio driver, the clock rework made this visible. This is the V2 series, that adds support for the missing 'MG Core clock' in mvpp2, and fixes an issue with the error path for the axi_clk. Thanks to Gregory Clement for finding the root cause of this bug. V2 : Remove all DT patches from this series, they will be merged through the mvebu tree. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
Marvell's PPv2.2 IP needs an additional clock named "MG Core clock". This is required on Armada 7K and 8K. This commit adds the required clock in mvpp2, making sure it's only used on PPv2.2. Fixes: c7e92def ("clk: mvebu: cp110: Fix clock tree representation") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When clk_prepare_enable fails for the axi_clk, the mg_clk isn't properly cleaned up. Add another jump label to handle that case, and make sure we jump to it in the later error cases. Fixes: 4792ea04 ("net: mvpp2: Fix clock resource by adding an optional bus clock") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-