- Oct 14, 2017
-
-
Amritha Nambiar authored
The offload types currently supported in mqprio are 0 (no offload) and 1 (offload only TCs) by setting these values for the 'hw' option. If offloads are supported by setting the 'hw' option to 1, the default offload mode is 'dcb' where only the TC values are offloaded to the device. This patch introduces a new hardware offload mode called 'channel' with 'hw' set to 1 in mqprio which makes full use of the mqprio options, the TCs, the queue configurations and the QoS parameters for the TCs. This is achieved through a new netlink attribute for the 'mode' option which takes values such as 'dcb' (default) and 'channel'. The 'channel' mode also supports QoS attributes for traffic class such as minimum and maximum values for bandwidth rate limits. This patch enables configuring additional HW shaper attributes associated with a traffic class. Currently the shaper for bandwidth rate limiting is supported which takes options such as minimum and maximum bandwidth rates and are offloaded to the hardware in the 'channel' mode. The min and max limits for bandwidth rates are provided by the user along with the TCs and the queue configurations when creating the mqprio qdisc. The interface can be extended to support new HW shapers in future through the 'shaper' attribute. Introduces a new data structure 'tc_mqprio_qopt_offload' for offloading mqprio queue options and use this to be shared between the kernel and device driver. This contains a copy of the existing data structure for mqprio queue options. This new data structure can be extended when adding new attributes for traffic class such as mode, shaper, shaper parameters (bandwidth rate limits). The existing data structure for mqprio queue options will be shared between the kernel and userspace. Example: queues 4@0 4@4 hw 1 mode channel shaper bw_rlimit\ min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit To dump the bandwidth rates: qdisc mqprio 804a: root tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 queues:(0:3) (4:7) mode:channel shaper:bw_rlimit min_rate:1Gbit 2Gbit max_rate:4Gbit 5Gbit Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- Oct 13, 2017
-
-
David S. Miller authored
Jon Maloy says: ==================== tipc: Introduce Communcation Group feature With this commit series we introduce a 'Group Communication' feature in order to resolve the datagram and multicast flow control problem. This new feature makes it possible for a user to instantiate multiple private virtual brokerless message buses by just creating and joining member sockets. The main features are as follows: --------------------------------- - Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN. If it is the first socket of the group this implies creation of the group. This call takes four parameters: 'type' serves as group identifier, 'instance' serves as member identifier, and 'scope' indicates the visibility of the group (node/cluster/zone). Finally, 'flags' indicates different options for the socket joining the group. For the time being, there are only two such flags: 1) 'LOOPBACK' indicates if the creator of the socket wants to receive a copy of broadcast or multicast messages it sends to the group, 2) EVENTS indicates if it wants to receive membership (JOINED/LEFT) events for the other members of the group. - Groups are closed, i.e., sockets which have not joined a group will not be able to send messages to or receive messages from members of the group, and vice versa. A socket can only be member of one group at a time. - There are four transmission modes. 1: Unicast. The sender transmits a message using the port identity (node:port tuple) of the receiving socket. 2: Anycast. The sender transmits a message using a port name (type: instance:scope) of one of the receiving sockets. If more than one member socket matches the given address a destination is selected according to a round-robin algorithm, but also considering the destination load (advertised window size) as an additional criteria. 3: Multicast. The sender transmits a message using a port name (type:instance:scope) of one or more of the receiving sockets. All sockets in the group matching the given address will receive a copy of the message. 4: Broadcast. The sender transmits a message using the primtive send(). All members of the group, irrespective of their member identity (instance) number receive a copy of the message. - TIPC broadcast is used for carrying messages in mode 3 or 4 when this is deemed more efficient, i.e., depending on number of actual destinations. - All transmission modes are flow controlled, so that messages never are dropped or rejected, just like we are used to from connection oriented communication. A special algorithm guarantees that this is true even for multipoint-to-point communication, i.e., at occasions where many source sockets may decide to send simultaneously towards the same destination socket. - Sequence order is always guaranteed, even between the different transmission modes. - Member join/leave events are received in all other member sockets in guaranteed order. I.e., a 'JOINED' (an empty message with the OOB bit set) will always be received before the first data message from a new member, and a 'LEAVE' (like 'JOINED', but with EOR bit set) will always arrive after the last data message from a leaving member. ----- v2: Reordered variable declarations in descending length order, as per feedback from David Miller. This was done as far as permitted by the the initialization order. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We already have point-to-multipoint flow control within a group. But we even need the opposite; -a scheme which can handle that potentially hundreds of sources may try to send messages to the same destination simultaneously without causing buffer overflow at the recipient. This commit adds such a mechanism. The algorithm works as follows: - When a member detects a new, joining member, it initially set its state to JOINED and advertises a minimum window to the new member. This window is chosen so that the new member can send exactly one maximum sized message, or several smaller ones, to the recipient before it must stop and wait for an additional advertisement. This minimum window ADV_IDLE is set to 65 1kB blocks. - When a member receives the first data message from a JOINED member, it changes the state of the latter to ACTIVE, and advertises a larger window ADV_ACTIVE = 12 x ADV_IDLE blocks to the sender, so it can continue sending with minimal disturbances to the data flow. - The active members are kept in a dedicated linked list. Each time a message is received from an active member, it will be moved to the tail of that list. This way, we keep a record of which members have been most (tail) and least (head) recently active. - There is a maximum number (16) of permitted simultaneous active senders per receiver. When this limit is reached, the receiver will not advertise anything immediately to a new sender, but instead put it in a PENDING state, and add it to a corresponding queue. At the same time, it will pick the least recently active member, send it an advertisement RECLAIM message, and set this member to state RECLAIMING. - The reclaimee member has to respond with a REMIT message, meaning that it goes back to a send window of ADV_IDLE, and returns its unused advertised blocks beyond that value to the reclaiming member. - When the reclaiming member receives the REMIT message, it unlinks the reclaimee from its active list, resets its state to JOINED, and notes that it is now back at ADV_IDLE advertised blocks to that member. If there are still unread data messages sent out by reclaimee before the REMIT, the member goes into an intermediate state REMITTED, where it stays until the said messages have been consumed. - The returned advertised blocks can now be re-advertised to the pending member, which is now set to state ACTIVE and added to the active member list. - To be proactive, i.e., to minimize the risk that any member will end up in the pending queue, we start reclaiming resources already when the number of active members exceeds 3/4 of the permitted maximum. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The following scenario is possible: - A user sends a broadcast message, and thereafter immediately leaves the group. - The LEAVE message, following a different path than the broadcast, arrives ahead of the broadcast, and the sending member is removed from the receiver's list. - The broadcast message arrives, but is dropped because the sender now is unknown to the receipient. We fix this by sequence numbering membership events, just like ordinary unicast messages. Currently, when a JOIN is sent to a peer, it contains a synchronization point, - the sequence number of the next sent broadcast, in order to give the receiver a start synchronization point. We now let even LEAVE messages contain such an "end synchronization" point, so that the recipient can delay the removal of the sending member until it knows that all messages have been received. The received synchronization points are added as sequence numbers to the generated membership events, making it possible to handle them almost the same way as regular unicasts in the receiving filter function. In particular, a DOWN event with a too high sequence number will be kept in the reordering queue until the missing broadcast(s) arrive and have been delivered. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The following scenario is possible: - A user joins a group, and immediately sends out a broadcast message to its members. - The broadcast message, following a different data path than the initial JOIN message sent out during the joining procedure, arrives to a receiver before the latter.. - The receiver drops the message, since it is not ready to accept any messages until the JOIN has arrived. We avoid this by treating group protocol JOIN messages like unicast messages. - We let them pass through the recipient's multicast input queue, just like ordinary unicasts. - We force the first following broadacst to be sent as replicated unicast and being acknowledged by the recipient before accepting any more broadcast transmissions. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We need a mechanism guaranteeing that group unicasts sent out from a socket are not bypassed by later sent broadcasts from the same socket. We do this as follows: - Each time a unicast is sent, we set a the broadcast method for the socket to "replicast" and "mandatory". This forces the first subsequent broadcast message to follow the same network and data path as the preceding unicast to a destination, hence preventing it from overtaking the latter. - In order to make the 'same data path' statement above true, we let group unicasts pass through the multicast link input queue, instead of as previously through the unicast link input queue. - In the first broadcast following a unicast, we set a new header flag, requiring all recipients to immediately acknowledge its reception. - During the period before all the expected acknowledges are received, the socket refuses to accept any more broadcast attempts, i.e., by blocking or returning EAGAIN. This period should typically not be longer than a few microseconds. - When all acknowledges have been received, the sending socket will open up for subsequent broadcasts, this time giving the link layer freedom to itself select the best transmission method. - The forced and/or abrupt transmission method changes described above may lead to broadcasts arriving out of order to the recipients. We remedy this by introducing code that checks and if necessary re-orders such messages at the receiving end. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
Group unicast messages don't follow the same path as broadcast messages, and there is a high risk that unicasts sent from a socket might bypass previously sent broadcasts from the same socket. We fix this by letting all unicast messages carry the sequence number of the next sent broadcast from the same node, but without updating this number at the receiver. This way, a receiver can check and if necessary re-order such messages before they are added to the socket receive buffer. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The previously introduced message transport to all group members is based on the tipc multicast service, but is logically a broadcast service within the group, and that is what we call it. We now add functionality for sending messages to all group members having a certain identity. Correspondingly, we call this feature 'group multicast'. The service is using unicast when only one destination is found, otherwise it will use the bearer broadcast service to transfer the messages. In the latter case, the receiving members filter arriving messages by looking at the intended destination instance. If there is no match, the message will be dropped, while still being considered received and read as seen by the flow control mechanism. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
In this commit, we make it possible to send connectionless unicast messages to any member corresponding to the given member identity, when there is more than one such member. The sender must use a TIPC_ADDR_NAME address to achieve this effect. We also perform load balancing between the destinations, i.e., we primarily select one which has advertised sufficient send window to not cause a block/EAGAIN delay, if any. This mechanism is overlayed on the always present round-robin selection. Anycast messages are subject to the same start synchronization and flow control mechanism as group broadcast messages. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We now make it possible to send connectionless unicast messages within a communication group. To send a message, the sender can use either a direct port address, aka port identity, or an indirect port name to be looked up. This type of messages are subject to the same start synchronization and flow control mechanism as group broadcast messages. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We introduce an end-to-end flow control mechanism for group broadcast messages. This ensures that no messages are ever lost because of destination receive buffer overflow, with minimal impact on performance. For now, the algorithm is based on the assumption that there is only one active transmitter at any moment in time. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
Like with any other service, group members' availability can be subscribed for by connecting to be topology server. However, because the events arrive via a different socket than the member socket, there is a real risk that membership events my arrive out of synch with the actual JOIN/LEAVE action. I.e., it is possible to receive the first messages from a new member before the corresponding JOIN event arrives, just as it is possible to receive the last messages from a leaving member after the LEAVE event has already been received. Since each member socket is internally also subscribing for membership events, we now fix this problem by passing those events on to the user via the member socket. We leverage the already present member synch- ronization protocol to guarantee correct message/event order. An event is delivered to the user as an empty message where the two source addresses identify the new/lost member. Furthermore, we set the MSG_OOB bit in the message flags to mark it as an event. If the event is an indication about a member loss we also set the MSG_EOR bit, so it can be distinguished from a member addition event. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
With group communication, it becomes important for a message receiver to identify not only from which socket (identfied by a node:port tuple) the message was sent, but also the logical identity (type:instance) of the sending member. We fix this by adding a second instance of struct sockaddr_tipc to the source address area when a message is read. The extra address struct is filled in with data found in the received message header (type,) and in the local member representation struct (instance.) Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
As a preparation for introducing flow control for multicast and datagram messaging we need a more strictly defined framework than we have now. A socket must be able keep track of exactly how many and which other sockets it is allowed to communicate with at any moment, and keep the necessary state for those. We therefore introduce a new concept we have named Communication Group. Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN. The call takes four parameters: 'type' serves as group identifier, 'instance' serves as an logical member identifier, and 'scope' indicates the visibility of the group (node/cluster/zone). Finally, 'flags' makes it possible to set certain properties for the member. For now, there is only one flag, indicating if the creator of the socket wants to receive a copy of broadcast or multicast messages it is sending via the socket, and if wants to be eligible as destination for its own anycasts. A group is closed, i.e., sockets which have not joined a group will not be able to send messages to or receive messages from members of the group, and vice versa. Any member of a group can send multicast ('group broadcast') messages to all group members, optionally including itself, using the primitive send(). The messages are received via the recvmsg() primitive. A socket can only be member of one group at a time. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We often see a need for a linked list of destination identities, sometimes containing a port number, sometimes a node identity, and sometimes both. The currently defined struct u32_list is not generic enough to cover all cases, so we extend it to contain two u32 integers and rename it to struct tipc_dest_list. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
We see an increasing need to send multiple single-buffer messages of TIPC_SYSTEM_IMPORTANCE to different individual destination nodes. Instead of looping over the send queue and sending each buffer individually, as we do now, we add a new help function tipc_node_distr_xmit() to do this. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
In the following commits we will need to handle multiple incoming and rejected/returned buffers in the function socket.c::filter_rcv(). As a preparation for this, we generalize the function by handling buffer queues instead of individual buffers. We also introduce a help function tipc_skb_reject(), and rename filter_rcv() to tipc_sk_filter_rcv() in line with other functions in socket.c. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
In the coming commits, functions at the socket level will need the ability to read the availability status of a given node. We therefore introduce a new function for this purpose, while renaming the existing static function currently having the wanted name. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The address given to tipc_connect() is not completely sanity checked, under the assumption that this will be done later in the function __tipc_sendmsg() when the address is used there. However, the latter functon will in the next commits serve as caller to several other send functions, so we want to move the corresponding sanity check there to the beginning of that function, before we possibly need to grab the address stored by tipc_connect(). We must therefore be able to trust that this address already has been thoroughly checked. We do this in this commit. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
As preparation for introducing communication groups, we add the ability to issue topology subscriptions and receive topology events from kernel space. This will make it possible for group member sockets to keep track of other group members. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The module clock is used for two purposes: - Wake-on-LAN (WoL), which is optional, - gPTP Timer Increment (GTI) configuration, which is mandatory. As the clock is needed for GTI configuration anyway, WoL is always available. Hence remove duplication and repeated obtaining of the clock by making GTI use the stored clock for WoL use. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rafał Miłecki says: ==================== net: support bgmac with B50212E B1 PHY I got a report that a board with BCM47189 SoC and B50212E B1 PHY doesn't work well some devices as there is massive ping loss. After analyzing PHY state it has appeared that is runs in slave mode and doesn't auto switch to master properly when needed. This patchset fixes this by: 1) Adding new flag support to the PHY driver for setting master mode 2) Modifying bgmac to request master mode for reported hardware ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
There are 4 very similar PHYs: 0x600d84a1: BCM54210E (rev B0) 0x600d84a2: BCM54210E (rev B1) 0x600d84a5: B50212E (rev B0) 0x600d84a6: B50212E (rev B1) that need setting master mode manually. It's because they run in slave mode by default with Automatic Slave/Master configuration disabled which can lead to unreliable connection with massive ping loss. So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY connected to the bgmac supported ethernet device. Telling PHY driver to setup PHY properly solves this issue. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
Some of Broadcom's PHYs run by default in slave mode with Automatic Slave/Master configuration disabled. It stops them from working properly with some devices. So far it has been verified for BCM54210E and BCM50212E which don't work well with Intel's I217-LM and I218-LM: http://ark.intel.com/products/60019/Intel-Ethernet-Connection-I217-LM http://ark.intel.com/products/71307/Intel-Ethernet-Connection-I218-LM I was told there is massive ping loss. This commit adds support for a new flag which can be set by an ethernet driver to fixup PHY setup. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
If the underlying master ever changes its L2 (e.g. bonding device), then make sure that the IPvlan slaves always emit packets with the current L2 of the master instead of the stale mac addr which was copied during the device creation. The problem can be seen with following script - #!/bin/bash # Create a vEth pair ip link add dev veth0 type veth peer name veth1 ip link set veth0 up ip link set veth1 up ip link show veth0 ip link show veth1 # Create an IPvlan device on one end of this vEth pair. ip link add link veth0 dev ipvl0 type ipvlan mode l2 ip link show ipvl0 # Change the mac-address of the vEth master. ip link set veth0 address 02:11:22:33:44:55 Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexander Aring says: ==================== sched: act: ife: UAPI checks and performance tweaks this patch series contains at first a patch which adds a check for IFE_ENCODE and IFE_DECODE when a ife act gets created or updated and adding handling of these cases only inside the act callback only. The second patch use per-cpu counters and move the spinlock around so that the spinlock is less being held in act callback. The last patch use rcu for update parameters and also move the spinlock for the same purpose as in patch 2. Notes: - There is still a spinlock around for protecting the metalist and a rw-lock for another list. Should be migrated to a rcu list, ife possible. - I use still dereference in dump callback, so I think what I didn't got was what happened when rcu_assign_pointer will do when rcu read lock is held. I suppose the pointer will be updated, then we don't have any issue here. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Aring authored
This patch changes the parameter updating via RCU and not protected by a spinlock anymore. This reduce the time that the spinlock is being held. Signed-off-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Aring authored
This patch migrates the current counter handling which is protected by a spinlock to a per-cpu counter handling. This reduce the time where the spinlock is being held. Signed-off-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Aring authored
This patch adds the check of the two possible ife handlings encode and decode to the init callback. The decode value is for usability aspect and used in userspace code only. The current code offers encode else decode only. This patch avoids any other option than this. Signed-off-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roman Mashak says: ==================== net: sched: Fix IFE meta modules loading Adjust module alias names of IFE meta modules and fix the bug that prevented auto-loading IFE modules in run-time. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Macro __stringify_1() can stringify a macro argument, however IFE_META_* are enums, so they never expand, however request_module expects an integer in IFE module name, so as a result it always fails to auto-load. Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Make style of module alias name consistent with other subsystems in kernel, for example net devices. Fixes: 084e2f65 ("Support to encoding decoding skb mark on IFE action") Fixes: 200e10f4 ("Support to encoding decoding skb prio on IFE action") Fixes: 408fbc22 ("net sched ife action: Introduce skb tcindex metadata encap decap") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christos Gkekas authored
Delete unused channel variables in vxge-traffic. Signed-off-by:
Christos Gkekas <chris.gekas@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
This file contains unnecessary whitespaces as newlines, remove them, found by looking at what struct tc_mirred looks like. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
When af_mpls is built-in but the tunnel support is a module, we get a link failure: net/mpls/af_mpls.o: In function `mpls_init': af_mpls.c:(.init.text+0xdc): undefined reference to `ip_tunnel_encap_add_ops' This adds a Kconfig statement to prevent the broken configuration and force mpls to be a module as well in this case. Fixes: bdc47641 ("ip_tunnel: add mpls over gre support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Amine Kherbouche <amine.kherbouche@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: ib_query_gid() patches triggered by Parav Pandit here are 2 cleanup patches for usage of ib_query_gid() in the smc-code. Thanks, Ursula v2 changes advised by Parav Pandit: extra check is_vlan_dev() in patch 2/2 "RoCE" spelling added "Reported-by" added "Reviewed-by" added "Fixes" ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For RoCEs ib_query_gid() takes a reference count on the net_device. This reference count must be decreased by the caller. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Fixes: 0cfdd8f9 ("smc: connection and link group creation") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
SMC should not open code the function pointer get_netdev of the IB device. Replacing ib_query_gid(..., NULL) with ib_query_gid(..., gid_attr) allows access to the netdev. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Suggested-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== Enable ACB for bcm_sf2 and bcmsysport This patch series enables Broadcom's Advanced Congestion Buffering mechanism which requires cooperation between the CPU/Management Ethernet MAC controller and the switch. I took the notifier approach because ultimately the information we need to carry to the master network device is DSA specific and I saw little room for generalizing beyond what DSA requires. Chances are that this is highly specific to the Broadcom HW as I don't know of any HW out there that supports something nearly similar for similar or identical needs. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-