- Sep 30, 2011
-
-
Ram Pai authored
__find_resource() incorrectly returns a resource window which overlaps an existing allocated window. This happens when the parent's resource-window spans 0x00000000 to 0xffffffff and is entirely allocated to all its children resource-windows. __find_resource() looks for gaps in resource allocation among the children resource windows. When it encounters the last child window it blindly tries the range next to one allocated to the last child. Since the last child's window ends at 0xffffffff the calculation overflows, leading the algorithm to believe that any window in the range 0x0000000 to 0xfffffff is available for allocation. This leads to a conflicting window allocation. Michal Ludvig reported this issue seen on his platform. The following patch fixes the problem and has been verified by Michal. I believe this bug has been there for ages. It got exposed by git commit 2bbc6942 ("PCI : ability to relocate assigned pci-resources") Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Tested-by:
Michal Ludvig <mludvig@logix.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/NewDreamNetwork/ceph-clientLinus Torvalds authored
* 'for-linus' of git://github.com/NewDreamNetwork/ceph-client: libceph: fix pg_temp mapping update libceph: fix pg_temp mapping calculation libceph: fix linger request requeuing libceph: fix parse options memory leak libceph: initialize ack_stamp to avoid unnecessary connection reset
-
git://linuxtv.org/mchehab/for_linusLinus Torvalds authored
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] omap3isp: Fix build error in ispccdc.c [media] uvcvideo: Fix crash when linking entities [media] v4l: Make sure we hold a reference to the v4l2_device before using it [media] v4l: Fix use-after-free case in v4l2_device_release [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: fix cio_tpi ignoring adapter interrupts [S390] gmap: always up mmap_sem properly [S390] Do not clobber personality flags on exec
-
git://github.com/davem330/sparcLinus Torvalds authored
* git://github.com/davem330/sparc: sparc64: Force the execute bit in OpenFirmware's translation entries. sparc: Make '-p' boot option meaningful again. sparc, exec: remove redundant addr_limit assignment sparc64: Future proof Niagara cpu detection.
-
git://people.freedesktop.org/~keithp/linuxLinus Torvalds authored
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915: FBC off for ironlake and older, otherwise on by default drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI drm/i915: Enable dither whenever display bpc < frame buffer bpc
-
Benjamin Herrenschmidt authored
Apple Quad G5 has some oddity in it's device-tree which causes the new generic matching code to fail to relate nodes for PCI-E devices below U4 with their respective struct pci_dev. This breaks graphics on those machines among others. This fixes it using a quirk which copies the node pointer from the host bridge for the root complex, which makes the generic code work for the children afterward. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
wangyanqing authored
Commit d5767c53 ("bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()") moved 'usermodehelper_enable()' to end of do_basic_setup() to after the initcalls. But then I get failed to let uvesafb work on my computer, and lose the splash boot. So maybe we could start usermodehelper_enable a little early to make some task work that need eary init with the help of user mode. [ I would *really* prefer that initcalls not call into user space - even the real 'init' hasn't been execve'd yet, after all! But for uvesafb it really does look like we don't have much choice. I considered doing this when we mount the root filesystem, but depending on config options that is in multiple places. We could do the usermode helper enable as a rootfs_initcall().. So I'm just using wang yanqing's trivial patch. It's not wonderful, but it's simple and should work. We should revisit this some day, though. - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
In the OF 'translations' property, the template TTEs in the mappings never specify the executable bit. This is the case even though some of these mappings are for OF's code segment. Therefore, we need to force the execute bit on in every mapping. This problem can only really trigger on Niagara/sun4v machines and the history behind this is a little complicated. Previous to sun4v, the sun4u TTE entries lacked a hardware execute permission bit. So OF didn't have to ever worry about setting anything to handle executable pages. Any valid TTE loaded into the I-TLB would be respected by the chip. But sun4v Niagara chips have a real hardware enforced executable bit in their TTEs. So it has to be set or else the I-TLB throws an instruction access exception with type code 6 (protection violation). We've been extremely fortunate to not get bitten by this in the past. The best I can tell is that the OF's mappings for it's executable code were mapped using permanent locked mappings on sun4v in the past. Therefore, the fact that we didn't have the exec bit set in the OF translations we would use did not matter in practice. Thanks to Greg Onufer for helping me track this down. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Sep 29, 2011
-
-
Linus Torvalds authored
Doing it just before starting to call into cpu_idle() made a sick kind of sense only because the original bug we fixed (see commit 288d5abe: "Boot up with usermodehelper disabled") was about problems with some scheduler data structures not being initialized, and they had better be initialized at that point. But it really didn't make any other conceptual sense, and doing it after the initial "schedule()" call for the idle thread actually opened up a race: what if the main initialization thread did everything without needing to sleep, and got all the way into user land too? Without actually having scheduled back to the idle thread? Now, in normal circumstances that doesn't ever happen, but it looks like Richard Cochran triggered exactly that on his ARM IXP4xx machines: "I have some ARM IXP4xx based machines that use the two on chip MAC ports (aka NPEs). The NPE needs a firmware in order to function. Ever since the following commit [that 288d5abe one], it is no longer possible to bring up the interfaces during the init scripts." with a call trace showing an ioctl coming from user space. Richard says: "The init is busybox, and the startup script does mount, syslogd, and then ifup, so that all can go by quickly." The fix is to move the usermodehelper_enable() into the main 'init' thread, and just put it after we've done all our initcalls. By then, everything really should be up, but we've obviously not actually started the user-mode portion of init yet. Reported-and-tested-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sage Weil authored
The incremental map updates have a record for each pg_temp mapping that is to be add/updated (len > 0) or removed (len == 0). The old code was written as if the updates were a complete enumeration; that was just wrong. Update the code to remove 0-length entries and drop the rbtree traversal. This avoids misdirected (and hung) requests that manifest as server errors like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 Signed-off-by:
Sage Weil <sage@newdream.net>
-
Sage Weil authored
We need to apply the modulo pg_num calculation before looking up a pgid in the pg_temp mapping rbtree. This fixes pg_temp mappings, and fixes (some) misdirected requests that result in messages like [WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11 on the server and stall make the client block without getting a reply (at least until the pg_temp mapping goes way, but that can take a long long time). Reorder calc_pg_raw() a bit to make more sense. Signed-off-by:
Sage Weil <sage@newdream.net>
-
- Sep 28, 2011
-
-
git://github.com/davem330/netLinus Torvalds authored
* git://github.com/davem330/net: ipv6-multicast: Fix memory leak in IPv6 multicast. ipv6: check return value for dst_alloc net: check return value for dst_alloc ipv6-multicast: Fix memory leak in input path. bnx2x: add missing break in bnx2x_dcbnl_get_cap bnx2x: fix WOL by enablement PME in config space bnx2x: fix hw attention handling net: fix a typo in Documentation/networking/scaling.txt ath9k: Fix a dma warning/memory leak rtlwifi: rtl8192cu: Fix unitialized struct iwlagn: fix dangling scan request batman-adv: do_bcast has to be true for broadcast packets only cfg80211: Fix validation of AKM suites iwlegacy: do not use interruptible waits iwlegacy: fix command queue timeout ath9k_hw: Fix Rx DMA stuck for AR9003 chips
-
git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6Linus Torvalds authored
* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: [SCSI] 3w-9xxx: fix iommu_iova leak [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference [SCSI] scsi: qla4xxx needs libiscsi.o [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child. [SCSI] aacraid: reset should disable MSI interrupt
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-block: block: Free queue resources at blk_release_queue()
-
git://github.com/fengguang/linuxLinus Torvalds authored
* 'writeback-for-linus' of git://github.com/fengguang/linux: writeback: show raw dirtied_when in trace writeback_single_inode
-
Hannes Reinecke authored
A kernel crash is observed when a mounted ext3/ext4 filesystem is physically removed. The problem is that blk_cleanup_queue() frees up some resources eg by calling elevator_exit(), which are not checked for in normal operation. So we should rather move these calls to the destructor function blk_release_queue() as at that point all remaining references are gone. However, in doing so we have to ensure that any externally supplied queue_lock is disconnected as the driver might free up the lock after the call of blk_cleanup_queue(), Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
-
Linus Torvalds authored
-
git://github.com/tiwai/soundLinus Torvalds authored
* 'for-linus' of git://github.com/tiwai/sound: ASoC: ssm2602: Re-enable oscillator after suspend ALSA: usb-audio: Check for possible chip NULL pointer before clearing probing flag ALSA: hda/realtek - Don't detect LO jack when identical with HP ALSA: hda/realtek - Avoid bogus HP-pin assignment ALSA: HDA: No power nids on 92HD93 ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is active
-
git://github.com/rjwysocki/linux-pmLinus Torvalds authored
* 'pm-fixes' of git://github.com/rjwysocki/linux-pm: PM / Clocks: Do not acquire a mutex under a spinlock
-
-
Ben Greear authored
If reg_vif_xmit cannot find a routing entry, be sure to free the skb before returning the error. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
return value of dst_alloc must be checked before use Signed-off-by:
Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
return value of dst_alloc must be checked before use Signed-off-by:
Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Greear authored
Have to free the skb before returning if we fail the fib lookup. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Shmulik Ravid authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
Use register name to initialize attention mask Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Takashi Iwai authored
-
- Sep 27, 2011
-
-
Linus Torvalds authored
That flag no longer makes sense, since we don't look up automount points as eagerly any more. Additionally, it turns out that the NO_AUTOMOUNT handling was buggy to begin with: it would avoid automounting even for cases where we really *needed* to do the automount handling, and could return ENOENT for autofs entries that hadn't been instantiated yet. With our new non-eager automount semantics, one discussion has been about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the newfstatat() and fstatat64() system calls), but it's probably not worth it: you can always force at least directory automounting by simply adding the final '/' to the filename, which works for *all* of the stat family system calls, old and new. So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a result of our bad default behavior. Acked-by:
Ian Kent <raven@themaw.net> Acked-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lars-Peter Clausen authored
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Trond Myklebust authored
The concensus seems to be that system calls such as stat() etc should not trigger an automount. Neither should the l* versions. This patch therefore adds a LOOKUP_AUTOMOUNT flag to tag those lookups that _should_ trigger an automount on the last path element. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [ Edited to leave out the cases that are already covered by LOOKUP_OPEN, LOOKUP_DIRECTORY and LOOKUP_CREATE - all of which also fundamentally force automounting for their own reasons - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Since we've now turned around and made LOOKUP_FOLLOW *not* force an automount, we want to add the ability to force an automount event on lookup even if we don't happen to have one of the other flags that force it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..) Most cases will never want to use this, since you'd normally want to delay automounting as long as possible, which usually implies LOOKUP_OPEN (when we open a file or directory, we really cannot avoid the automount any more). But Trond argued sufficiently forcefully that at a minimum bind mounting a file and quotactl will want to force the automount lookup. Some other cases (like nfs_follow_remote_path()) could use it too, although LOOKUP_DIRECTORY would work there as well. This commit just adds the flag and logic, no users yet, though. It also doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and was made irrelevant by the same change that made us not follow on LOOKUP_FOLLOW. Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ian Kent <raven@themaw.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/kgene/linux-samsungLinus Torvalds authored
* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
-
Sylwester Nawrocki authored
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Sylwester Nawrocki authored
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
git://github.com/groeck/linuxLinus Torvalds authored
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) remove struct platform_data * parameter from create_core_data() hwmon: (coretemp) constify static data hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID hwmon: (ds620) Fix handling of negative temperatures hwmon: (w83791d) rename prototype parameter from 'register' to 'reg' hwmon: (coretemp) Don't use threshold registers for tempX_max hwmon: (coretemp) Let the user force TjMax hwmon: (coretemp) Drop duplicate function get_pkg_tjmax
-