- Nov 06, 2019
-
-
Christophe JAILLET authored
Use 'skb_queue_purge()' instead of re-implementing it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The order in which the ports are deleted from the list and freed and the call to dsa_switch_remove() is done is reversed, which leads to an use after free condition. Reverse the two: first tear down the ports and switch from the fabric, then free the ports associated with that switch fabric. Fixes: 05f294a8 ("net: dsa: allocate ports on touch") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Matteo Croce says: ==================== icmp: move duplicate code in helper functions Remove some duplicate code by moving it in two helper functions. First patch adds the helpers, the second one uses it. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
The same code which recognizes ICMP error packets is duplicated several times. Use the icmp_is_err() and icmpv6_is_err() helpers instead, which do the same thing. ip_multipath_l3_keys() and tcf_nat_act() didn't check for all the error types, assume that they should instead. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
Add two helper functions, one for IPv4 and one for IPv6, to recognize the ICMP packets which are error responses. This packets are special because they have as payload the original header of the packet which generated it (RFC 792 says at least 8 bytes, but Linux actually includes much more than that). Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== netvsc: RSS related patches Address a couple of issues related to recording RSS hash value in skb. These were found by reviewing RSS support. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Since RSS hash is available from the host, record it in the skb. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
When the driver needs to create a hash value because it was not done at higher level, then the hash should be marked as a software not hardware hash. Fixes: f72860af ("hv_netvsc: Exclude non-TCP port numbers from vRSS hashing") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-11-04 This series contains updates to the ice driver only. Anirudh refactors the code to reduce the kernel configuration flags and introduces ice_base.c file. Maciej does additional refactoring on the configuring of transmit rings so that we are not configuring per each traffic class flow. Added support for XDP in the ice driver. Provides additional re-organizing of the code in preparation for adding build_skb() support in the driver. Adjusted the computational padding logic for headroom and tailroom to better support build_skb(), which also aligns with the logic in other Intel LAN drivers. Added build_skb support and make use of the XDP's data_meta. Krzysztof refactors the driver to prepare for AF_XDP support in the driver and then adds support for AF_XDP. v2: Updated patch 3 of the series based on community feedback with the following changes... - return -EOPNOTSUPP instead of ENOTSUPP for too large MTU which makes it impossible to attach XDP prog - don't check for case when there's no XDP prog currently on interface and ice_xdp() is called with NULL bpf_prog; this happens when user does "ip link set eth0 xdp off" and no prog is present on VSI; no need for that as it is handled by higher layer - drop the extack message for unknown xdp->command - use the smp_processor_id() for accessing the XDP Tx ring for XDP_TX action - don't leave the interface in downed state in case of any failure during the XDP Tx resources handling - undo rename of ice_build_ctob The above changes caused a ripple effect in patches 4 & 5 to update references to ice_build_ctob() which are now build_ctob() ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2019-11-04 This series contains old Halloween candy updates, yet still sweet, to fm10k, ixgbe and i40e. Jake adds the missing initializers for a couple of the TLV attribute macros. Added support for capturing and reporting statistics for all of the VFs in a given PF. Lastly, bump the version of the fm10k driver to reflect the recent changes. Alex addresses locality issues in the ixgbe driver when it is loaded on a system supporting multiple NUMA nodes. Manjunath Patil provides changes to the ixgbe driver, similar to those made to igb, to prevent transmit packets to request a hardware timestamp when the NIC has not been setup via the SIOCSHWTSTAMP ioctl. Alice adds support for x710 by adding the missing device id's in the appropriate places to ensure all the features are enabled in i40e. Jesse adds support for VF stats gathering in the i40e via the kernel via ndo_get_vf_stats function. v2: Fixed up commit id references in patch 5's description to align with how commit id's should be referenced. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Nov 05, 2019
-
-
Jesse Brandeburg authored
Implement the VF stats gathering via the kernel via ndo_get_vf_stats(). The driver will show per-VF stats in the output of the command: ip -s link show dev <PF> Testing Hints: ip -s link show dev eth0 will return non-zero VF stats. ... vf 0 MAC 00:55:aa:00:55:aa, spoof checking on, link-state enable, trust off RX: bytes packets mcast bcast 128000 1000 104 104 TX: bytes packets 128000 1000 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alice Michael authored
The I40E_DEV_ID_10G_BASE_T_BC device id was added previously, but was not enabled in all the appropriate places. Adding it to enable it's use. Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Manjunath Patil authored
HW timestamping can only be requested for a packet if the NIC is first setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe driver still allowed TX packets to request HW timestamping. In this situation, we see 'clearing Tx Timestamp hang' noise in the log. Fix this by checking that the NIC is configured for HW TX timestamping before accepting a HW TX timestamping request. Similar-to: commit 26bd4e2d ("igb: protect TX timestamping from API misuse") commit 0a6f2f05 ("igb: Fix a test with HWTSTAMP_TX_ON") Signed-off-by:
Manjunath Patil <manjunath.b.patil@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
An upcoming out-of-tree release will be occurring which will include the recent functionality to support virtual function statistics. Update the kernel driver version to match this. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This patch is meant to address locality issues present in the ixgbe driver when it is loaded on a system supporting multiple NUMA nodes and more CPUs then the device can map in a 1:1 fashion. Instead of just arbitrarily mapping itself to CPUs 0-62 it would make much more sense to map itself to the local CPUs first, and then map itself to any remaining CPUs that might be used. The first effect of this is that queue 0 should always be allocated on the local CPU/NUMA node. This is important as it is the default destination if a packet doesn't match any existing flow director filter or RSS rule and as such having it local should help to reduce QPI cross-talk in the event of an unrecognized traffic type. In addition this should increase the likelihood of the RSS queues being allocated and used on CPUs local to the device while the ATR/Flow Director queues would be able to route traffic directly to the CPU that is likely to be processing it. Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Support capturing and reporting statistics for all of the VFs associated with a given PF device via the ndo_get_vf_stats callback. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Add the missing field initializers for a couple of the TLV attribute macros. This resolves the last few -Wmissing-field-initializers warnings for the fm10k Linux driver. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
At this point ice driver is able to work on order 1 pages that are split onto two 3k buffers. Let's reflect that when user is setting new MTU size and XDP is present on interface. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
Driver is now prepared for building the skb around the existing Rx buffer, so introduce the ice_build_skb responsible for it. Make use of XDP's data_meta as well. I've observed around 30% less CPU consumption with build_skb Rx path, in comparison to legacy Rx. What stands behind such result is the avoidance of flow_dissector (which we were diving into via eth_get_headlen) and no memcpy calls. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
Take into account the underlying architecture specific settings and based on that calculate the possible padding that can be supplied. Typically, for x86 and standard MTU size we will end up with 192 bytes of headroom. This is the same behavior as our other drivers have and we can dedicate it for XDP purposes. Furthermore, introduce the Rx ring flag for indicating whether build_skb is used on particular. Based on that invoke the routines for padding calculation. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
Add an ethtool "legacy-rx" priv flag for toggling the Rx path. This control knob will be mainly used for build_skb usage as well as buffer size/MTU manipulation. In preparation for adding build_skb support in a way that it takes care of how we set the values of max_frame and rx_buf_len fields of struct ice_vsi. Specifically, in this patch mentioned fields are set to values that will allow us to provide headroom and tailroom in-place. This can be mostly broken down onto following: - for legacy-rx "on" ethtool control knob, old behaviour is kept; - for standard 1500 MTU size configure the buffer of size 1536, as network stack is expecting the NET_SKB_PAD to be provided and NET_IP_ALIGN can have a non-zero value (these can be typically equal to 32 and 2, respectively); - for larger MTUs go with max_frame set to 9k and configure the 3k buffer in case when PAGE_SIZE of underlying arch is less than 8k; 3k buffer is implying the need for order 1 page, so that our page recycling scheme can still be applied; With that said, substitute the hardcoded ICE_RXBUF_2048 and PAGE_SIZE values in DMA API that we're making use of with rx_ring->rx_buf_len and ice_rx_pg_size(rx_ring). The latter is an introduced helper for determining the page size based on its order (which was figured out via ice_rx_pg_order). Last but not least, take care of truesize calculation. In the followup patch the headroom/tailroom computation logic will be introduced. This change aligns the buffer and frame configuration with other Intel drivers, most importantly with iavf. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Krzysztof Kazimierczak authored
Add zero copy AF_XDP support. This patch adds zero copy support for Tx and Rx; code for zero copy is added to ice_xsk.h and ice_xsk.c. For Tx, implement ndo_xsk_wakeup. As with other drivers, reuse existing XDP Tx queues for this task, since XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU ID. In turn, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. For Rx, allocate frames as MEM_TYPE_ZERO_COPY on queues that AF_XDP is enabled. Signed-off-by:
Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Co-developed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Krzysztof Kazimierczak authored
In preparation of AF XDP, move functions that will be used both by skb and zero-copy paths to a new file called ice_txrx_lib.c. This allows us to avoid using ifdefs to control the staticness of said functions. Move other functions (ice_rx_csum, ice_rx_hash and ice_ptype_to_htype) called only by the moved ones to the new file as well. Signed-off-by:
Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Daniel Borkmann authored
Commit 5bc60de5 ("selftests: bpf: Don't try to read files without read permission") got reverted as the fix was not working as expected and real fix came in via 8101e069 ("selftests: bpf: Skip write only files in debugfs"). When bpf-next got merged into net-next, the test_offload.py had a small conflict. Fix the resolution in ae8a76fb iby not reintroducing 5bc60de5 again. Fixes: ae8a76fb ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Building with W=1 (cf.scripts/Makefile.extrawarn) outputs: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Drop the unused 'ret' variable. Signed-off-by:
Christophe Roullier <christophe.roullier@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thomas Bogendoerfer authored
IOC3 hardware needs a 16k aligned TX ring. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
Set NETIF_F_HIGHDMA together with the NETIF_F_IP_CSUM flag instead of letting the second assignment overwrite it. Probably doesn't matter in practice as none of the systems an IOC3 is usually found in has highmem to start with. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
There is no need to fall back to a lower mask these days, the DMA mask just communicates the hardware supported features. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
dma_alloc_coherent always zeroes memory, there is no need for __GFP_ZERO. Also doing a GFP_ATOMIC allocation just before a GFP_KERNEL one is clearly bogus. Fixes: ed870f6a ("net: sgi: ioc3-eth: use dma-direct for dma allocations") Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
dma_direct_ is a low-level API that must never be used by drivers directly. Switch to use the proper DMA API instead. Fixes: ed870f6a ("net: sgi: ioc3-eth: use dma-direct for dma allocations") Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Faster jhash2() can be used instead of jhash(), since IPv6 addresses have the needed alignment requirement. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When commit df1c0b84 ("[BRIDGE]: Packets leaking out of disabled/blocked ports.") introduced the port state tests in br_fdb_update() it was to avoid learning/refreshing from STP BPDUs, it was also used to avoid learning/refreshing from user-space with NTF_USE. Those two tests are done for every packet entering the bridge if it's learning, but for the fast-path we already have them checked in br_handle_frame() and is unnecessary to do it again. Thus push the checks to the unlikely cases and drop them from br_fdb_update(), the new nbp_state_should_learn() helper is used to determine if the port state allows br_fdb_update() to be called. The two places which need to do it manually are: - user-space add call with NTF_USE set - link-local packet learning done in __br_handle_local_finish() Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maciej Fijalkowski authored
Add support for XDP. Implement ndo_bpf and ndo_xdp_xmit. Upon load of an XDP program, allocate additional Tx rings for dedicated XDP use. The following actions are supported: XDP_TX, XDP_DROP, XDP_REDIRECT, XDP_PASS, and XDP_ABORTED. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Maciej Fijalkowski authored
There's no reason for treating DCB as first class citizen when configuring the Tx queues and going through TCs. Reverse the logic and base the configuration logic on rings, which is the object of interest anyway. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
Remove a few uses of kernel configuration flags from ice_lib.c by introducing a new source file ice_base.c. Also move corresponding function prototypes from ice_lib.h to ice_base.h and include ice_base.h where required. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- Nov 04, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-11-01 Misc updates for mlx5 netdev and core driver 1) Steering Core: Replace CRC32 internal implementation with standard kernel lib. 2) Steering Core: Support IPv4 and IPv6 mixed matcher. 3) Steering Core: Lockless FTE read lookups 4) TC: Bit sized fields rewrite support. 5) FPGA: Standalone FPGA support. 6) SRIOV: Reset VF parameters configurations on SRIOV disable. 7) netdev: Dump WQs wqe descriptors on CQE with error events. 8) MISC Cleanups. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
drivers/isdn/hardware/mISDN/mISDNisar.c:30:17: warning: faxmodulation_s defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vincent Cheng authored
The IDT ClockMatrix (TM) family includes integrated devices that provide eight PLL channels. Each PLL channel can be independently configured as a frequency synthesizer, jitter attenuator, digitally controlled oscillator (DCO), or a digital phase lock loop (DPLL). Typically these devices are used as timing references and clock sources for PTP applications. This patch adds support for the device. Co-developed-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-