Pull scheduler fixes from Ingo Molnar:
 "Two load-balancing fixes for cgroups-intense workloads"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix calc_cfs_shares() fixed point arithmetics width confusion
  sched/fair: Fix effective_load() to consistently use smoothed load

Pull perf fixes from Ingo Molnar:
 "Various fixes:

   - 32-bit callgraph bug fix
   - suboptimal event group scheduling bug fix
   - event constraint fixes for Broadwell/Skylake
   - RAPL module name collision fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix pmu::filter_match for SW-led groups
  x86/perf/intel/rapl: Fix module name collision with powercap intel-rapl
  perf/x86: Fix 32-bit perf user callgraph collection
  perf/x86/intel: Update event constraints when HT is off

Pull irq fixes from Ingo Molnar:
 "Two MIPS-GIC irqchip driver fixes to unbreak certain MIPS boards"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Match IPI IRQ domain by bus token only
  irqchip/mips-gic: Map to VPs using HW VPNum

Pull GPIO fixes from Linus Walleij:
 "I don't like to toss in last minute patches, but these are all for
  things that are broken, and have bitten people for real.  Two of them
  go into stable.  Maybe all of them if the compile test problem is a
  pain in the ass also for stable folks.

  Final (hopefully) GPIO fixes for v4.7:

   - Fix an oops on the Asus Eee PC 1201

   - Revert a patch trying to split GPIO parsing and GPIO configuration

   - Revert a too liberal compile testing thing"

* tag 'gpio-v4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: gpiolib-of: Allow compile testing"
  Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"
  gpio: sch: Fix Oops on module load on Asus Eee PC 1201

Pull drm fixes from Dave Airlie:
 "One nouveau fix, and a few AMD Polaris fixes and some Allwinner fixes.

  I've got some vmware fixes that I might send separate over the
  weekend, they fix some black screens, but I'm still debating them"

* tag 'drm-fixes-for-v4.7-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation.
  drm/amd/powerplay: fix bug that get wrong polaris evv voltage.
  drm/amd/powerplay: incorrectly use of the function return value
  drm/amd/powerplay: fix incorrect voltage table value for tonga
  drm/amd/powerplay: fix incorrect voltage table value for polaris10
  drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern
  gpu: drm: sun4i_drv: add missing of_node_put after calling of_parse_phandle
  drm/sun4i: Send vblank event when the CRTC is disabled
  drm/sun4i: Report proper vblank

Pull apparmor fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()

Pull ACPI fixes from Rafael Wysocki:
 "All of these fix recent regressions in ACPICA, in the ACPI PCI IRQ
  management code and in the ACPI AML debugger.

  Specifics:

   - Fix a lock ordering issue in ACPICA introduced by a recent commit
     that attempted to fix a deadlock in the dynamic table loading code
     which in turn appeared after changes related to the handling of
     module-level AML also made in this cycle (Lv Zheng).

   - Fix a recent regression in the ACPI IRQ management code that may
     cause PCI drivers to be unable to register an IRQ if that IRQ
     happens to be shared with a device on the ISA bus, like the
     parallel port, by reverting one commit entirely and restoring the
     previous behavior in two other places (Sinan Kaya).

   - Fix a recent regression in the ACPI AML debugger introduced by the
     commit that removed incorrect usage of IS_ERR_VALUE() from multiple
     places (Lv Zheng)"

* tag 'acpi-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removal
  ACPICA: Namespace: Fix namespace/interpreter lock ordering
  ACPI,PCI,IRQ: separate ISA penalty calculation
  Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()"
  ACPI,PCI,IRQ: factor in PCI possible

Pull power management fixes from Rafael Wysocki:
 "One fix for a recent cpuidle core change that, against all odds,
  introduced a functional regression on Power systems and the fix for
  the crash during resume from hibernation on x86-64 that has been in
  the works for the last few weeks (it actually was ready last week, but
  I wanted to allow the reporters to test if for some more time).

  Specifics:

   - Fix a recent performance regression on Power systems (powernv and
     pseries) introduced by a core cpuidle commit that decreased the
     precision of the last_residency conversion from nano- to
     microseconds, which should not matter in theory, but turned out to
     play not-so-well with the special "snooze" idle state on Power
     (Shreyas B Prabhu).

   - Fix a crash during resume from hibernation on x86-64 caused by
     possible corruption of the kernel text part of page tables in the
     last phase of image restoration exposed by a security-related
     change during the 4.3 development cycle (Rafael Wysocki)"

* tag 'pm-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: Fix last_residency division
  x86/power/64: Fix kernel text mapping corruption during image restoration

Merge tag 'sunxi-drm-fixes-for-4.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes

Allwinner DRM driver fixes for 4.7, take 2

A new set of fixes for the sun4i driver, mostly related to vblank handling,
and a minor fix to release a reference on the device tree nodes we're
parsing in the probe logic.

* tag 'sunxi-drm-fixes-for-4.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  gpu: drm: sun4i_drv: add missing of_node_put after calling of_parse_phandle
  drm/sun4i: Send vblank event when the CRTC is disabled
  drm/sun4i: Report proper vblank

When proc_pid_attr_write() was changed to use memdup_user apparmor's
(interface violating) assumption that the setprocattr buffer was always
a single page was violated.

The size test is not strictly speaking needed as proc_pid_attr_write()
will reject anything larger, but for the sake of robustness we can keep
it in.

SMACK and SELinux look safe to me, but somebody else should probably
have a look just in case.

Based on original patch from Vegard Nossum <vegard.nossum@oracle.com>
modified for the case that apparmor provides null termination.

Fixes: bb646cdb


Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: stable@kernel.org
Signed-off-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Pull block IO fixes from Jens Axboe:
 "Three small fixes that have been queued up and tested for this series:

   - A bug fix for xen-blkfront from Bob Liu, fixing an issue with
     incomplete requests during migration.

   - A fix for an ancient issue in retrieving the IO priority of a
     different PID than self, preventing that task from going away while
     we access it.  From Omar.

   - A writeback fix from Tahsin, fixing a case where we'd call ihold()
     with a zero ref count inode"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix use-after-free in sys_ioprio_get()
  writeback: inode cgroup wb switch should not call ihold()
  xen-blkfront: save uncompleted reqs in blkfront_resume()

Pull configfs fix from Christoph Hellwig:
 "A fix from Marek for ppos handling in configfs_write_bin_file, which
  was introduced in Linux 4.5, but didn't have any users until recently"

* tag 'configfs-for-4.7' of git://git.infradead.org/users/hch/configfs:
  configfs: Remove ppos increment in configfs_write_bin_file

* acpica-fixes:
  ACPICA: Namespace: Fix namespace/interpreter lock ordering

* acpi-pci-fixes:
  ACPI,PCI,IRQ: separate ISA penalty calculation
  Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()"
  ACPI,PCI,IRQ: factor in PCI possible

* acpi-debug-fixes:
  ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removal

* pm-cpuidle-fixes:
  cpuidle: Fix last_residency division

* pm-sleep-fixes:
  x86/power/64: Fix kernel text mapping corruption during image restoration

The following commit:

  66eb579e

 ("perf: allow for PMU-specific event filtering")

added the pmu::filter_match() callback. This was intended to
avoid HW constraints on events from resulting in extremely
pessimistic scheduling.

However, pmu::filter_match() is only called for the leader of each event
group. When the leader is a SW event, we do not filter the groups, and
may fail at pmu::add() time, and when this happens we'll give up on
scheduling any event groups later in the list until they are rotated
ahead of the failing group.

This can result in extremely sub-optimal event scheduling behaviour,
e.g. if running the following on a big.LITTLE platform:

$ taskset -c 0 ./perf stat \
 -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \
 -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \
 ls

     <not counted>      context-switches                                              (0.00%)
     <not counted>      armv8_cortex_a57/config=0x11/                                 (0.00%)
                24      context-switches                                              (37.36%)
          57589154      armv8_cortex_a53/config=0x11/                                 (37.36%)

Here the 'a53' event group was always eligible to be scheduled, but
the 'a57' group never eligible to be scheduled, as the task was always
affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57'
group was eligible, but the HW event failed at pmu::add() time,
resulting in ctx_flexible_sched_in giving up on scheduling further
groups with HW events.

One way of avoiding this is to check pmu::filter_match() on siblings
as well as the group leader. If any of these fail their
pmu::filter_match() call, we must skip the entire group before
attempting to add any events.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 66eb579e ("perf: allow for PMU-specific event filtering")
Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com


[ Small readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Just one fix for a stupid thinko in a DP training pattern commit.

* 'linux-4.7' of git://github.com/skeggsb/linux:
  drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern

Just a couple of fixes for amdgpu for 4.7:
- 2 small tonga powerplay fixes
- Additional Polaris fixes

* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation.
  drm/amd/powerplay: fix bug that get wrong polaris evv voltage.
  drm/amd/powerplay: incorrectly use of the function return value
  drm/amd/powerplay: fix incorrect voltage table value for tonga
  drm/amd/powerplay: fix incorrect voltage table value for polaris10

The "expert" menu was broken (split) such that all entries in it after
KALLSYMS were displayed in the "General setup" area instead of in the
"Expert users" area.  Fix this by adding one kconfig dependency.

Yes, the Expert users menu is fragile.  Problems like this have happened
several times in the past.  I will attempt to isolate the Expert users
menu if there is interest in that.

Fixes: 4d5d5664

 ("x86: kallsyms: disable absolute percpu symbols on !SMP")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org  # 4.6
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As get the right evv voltage, update them to latest coefficients to
align with BB.

agd: squash in Slava's 32 bit build fix

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

value is 32 bits for polaris, not 16.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'0' means true.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull networking fixes from David Miller:

 1) All users of AF_PACKET's fanout feature want a symmetric packet
    header hash for load balancing purposes, so give it to them.

 2) Fix vlan state synchronization in e1000e, from Jarod Wilson.

 3) Use correct socket pointer in ip_skb_dst_mtu(), from Shmulik
    Ladkani.

 4) mlx5 bug fixes from Mohamad Haj Yahia, Daniel Jurgens, Matthew
    Finlay, Rana Shahout, and Shaker Daibes.  Mostly to do with
    operation timeouts and PCI error handling.

 5) Fix checksum handling in mirred packet action, from WANG Cong.

 6) Set skb->dev correctly when transmitting in !protect_frames case of
    macsec driver, from Daniel Borkmann.

 7) Fix MTU calculation in geneve driver, from Haishuang Yan.

 8) Missing netif_napi_del() in unregister path of qeth driver, from
    Ursula Braun.

 9) Handle malformed route netlink messages in decnet properly, from
    Vergard Nossum.

10) Memory leak of percpu data in ipv6 routing code, from Martin KaFai
    Lau.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ipv6: Fix mem leak in rt6i_pcpu
  net: fix decnet rtnexthop parsing
  cxgb4: update latest firmware version supported
  net/mlx5: Avoid setting unused var when modifying vport node GUID
  bonding: fix enslavement slave link notifications
  r8152: fix runtime function for RTL8152
  qeth: delete napi struct when removing a qeth device
  Revert "fsl/fman: fix error handling"
  fsl/fman: fix error handling
  cdc_ncm: workaround for EM7455 "silent" data interface
  RDS: fix rds_tcp_init() error path
  geneve: fix max_mtu setting
  net: phy: dp83867: Fix initialization of PHYCR register
  enc28j60: Fix race condition in enc28j60 driver
  net: stmmac: Fix null-function call in ISR on stmmac1000
  tipc: fix nl compat regression for link statistics
  net: bcmsysport: Device stats are unsigned long
  macsec: set actual real device for xmit when !protect_frames
  net_sched: fix mirrored packets checksum
  packet: Use symmetric hash for PACKET_FANOUT_HASH.
  ...

Pull sound fixes from Takashi Iwai:
 "Here are a collection of small fixes: at this time, we've got a
  slightly high amount, but all small and trivial fixes, and nothing
  scary can be seen there"

* tag 'sound-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup
  ALSA: timer: Fix negative queue usage by racy accesses
  ASoC: rt5645: fix reg-2f default value.
  ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode
  ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()
  ALSA: hda - Add PCI ID for Kabylake-H
  ALSA: echoaudio: Fix memory allocation
  ASoC: Intel: atom: fix missing breaks that would cause the wrong operation to execute
  ALSA: hda - fix read before array start
  ASoC: cx20442: set tty->receiver_room in v253_open
  ASoC: ak4613: Enable cache usage to fix crashes on resume
  ASoC: wm8940: Enable cache usage to fix crashes on resume
  ASoC: Intel: Skylake: Initialize module list for Broxton
  ASoC: wm5102: Correct supported channels on trace compressed DAI
  ASoC: wm5110: Add missing route from OUT3R to SYSCLK
  ASoC: rt5670: fix HP Playback Volume control
  ASoC: hdmi-codec: select CONFIG_HDMI
  ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG port
  ASoC: hdac_hdmi: Fix potential NULL dereference
  ASoC: ak4613: Remove owner assignment from platform_driver
  ...

Pull chrome platform fix from Olof Johansson:
 "A single fix this time, closing a window where ioctl args are fetched
  twice"

* tag 'chrome-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  platform/chrome: cros_ec_dev - double fetch bug in ioctl

Since commit 4b6e2571 the rapl perf module calls itself intel-rapl. That
name was already in use by the rapl powercap driver, which now fails to load
if the perf module is loaded. Fix the problem by renaming the perf module to
intel-rapl-perf, so that both modules can coexist.

Fixes: 4b6e2571

 ("x86/perf/intel/rapl: Make the Intel RAPL PMU driver modular")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466694409-3620-1-git-send-email-ville.syrjala@linux.intel.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

It was first reported and reproduced by Petr (thanks!) in
https://bugzilla.kernel.org/show_bug.cgi?id=119581

free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy().

However, after fixing a deadlock bug in
commit 9c7370a1

 ("ipv6: Fix a potential deadlock when creating pcpu rt"),
free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL.

It is worth to note that rt6i_pcpu is protected by table->tb6_lock.

kmemleak somehow did not report it.  We nailed it down by
observing the pcpu entries in /proc/vmallocinfo (first suggested
by Hannes, thanks!).

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Fixes: 9c7370a1

 ("ipv6: Fix a potential deadlock when creating pcpu rt")
Reported-by: Petr Novopashenniy <pety@rusnet.ru>
Tested-by: Petr Novopashenniy <pety@rusnet.ru>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Petr Novopashenniy <pety@rusnet.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

dn_fib_count_nhs() could enter an infinite loop if nhp->rtnh_len == 0
(i.e. if userspace passes a malformed netlink message).

Let's use the helpers from net/nexthop.h which take care of all this
stuff. We can do exactly the same as e.g. fib_count_nexthops() and
fib_get_nhs() from net/ipv4/fib_semantics.c.

This fixes the softlockup for me.

Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The FIFO unlocking mechanism in acpi_dbg has been broken by the
following commit:

  Commit: 287980e4
  Subject: remove lots of IS_ERR_VALUE abuses

It converted !IS_ERR_VALUE(ret) into !ret which was not entirely
correct. Fix the regression by taking ret > 0 into account too as
appropriate.

Fixes: 287980e4

 (remove lots of IS_ERR_VALUE abuses)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Simplifications, changelog & subject massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

We verify "u_cmd.outsize" and "u_cmd.insize" but we need to make sure
that those values have not changed between the two copy_from_user()
calls.  Otherwise it could lead to a buffer overflow.

Additionally, cros_ec_cmd_xfer() can set s_cmd->insize to a lower value.
We should use the new smaller value so we don't copy too much data to
the user.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: a8411784

 ('mfd: cros_ec: Use a zero-length array for command data')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Olof Johansson <olof@lixom.net>

Fixes a regression caused by a stupid thinko from "disp/sor/gf119: both
links use the same training register".

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

There is a lock order issue in acpi_load_tables(). The namespace lock
is held before holding the interpreter lock.

With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the
log during boot:

  [    0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263)
  [    0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95)
  [    0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326)
  [    0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133)

The issue has been introduced by the following commit:

  Commit: 2f38b1b1
  ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e
  Subject: ACPICA: Namespace: Fix a regression that MLC support triggers
           dead lock in dynamic table loading

Which fixed a deadlock issue for acpi_ns_load_table() in
acpi_ex_add_table() but didn't take care of the lock order in
acpi_ns_load_table() correctly.

Originally (before the above commit), ACPICA used the
namespace/interpreter locks in the following 2 key code
paths:

 1. Table loading:
 acpi_ns_load_table
	L(Namespace)
		acpi_ns_parse_table
			acpi_ns_one_complete_parse
	U(Namespace)
 2. Object evaluation:
 acpi_ns_evaluate
	L(Interpreter)
	acpi_ps_execute_method
		U(Interpreter)
		acpi_ns_load_table
			L(Namespace)
			U(Namespace)
		acpi_ev_initialize_region
			L(Namespace)
			U(Namespace)
		address_space.setup
			L(Namespace)
			U(Namespace)
		address_space.handler
			L(Namespace)
			U(Namespace)
		acpi_os_wait_semaphore
		acpi_os_acquire_mutex
		acpi_os_sleep
		L(Interpreter)
	U(Interpreter)

During runtime, while acpi_ns_evaluate is called, the lock order is
always Interpreter -> Namespace.

In turn, the problematic commit acquires the locks in the following
order:

 3. Table loading:
 acpi_ns_load_table
	L(Namespace)
		acpi_ns_parse_table
		L(Interpreter)
			acpi_ns_one_complete_parse
		U(Interpreter)
	U(Namespace)

To fix the lock order issue, move the interpreter lock to
acpi_ns_load_table() to ensure the lock order correctness:

 4. Table loading:
 acpi_ns_load_table
	L(Interpreter)
	L(Namespace)
		acpi_ns_parse_table
			acpi_ns_one_complete_parse
	U(Namespace)
	U(Interpreter)

However, this doesn't fix the current design issues related to the
namespace lock. For example, we can notice that in acpi_ns_evaluate(),
outside of acpi_ns_load_table(), the namespace objects may be created
by the named object creation control methods. And the creation of
the method-owned namespace objects are not locked by the namespace
lock. This patch doesn't try to fix such kind of existing issues.

Fixes: 2f38b1b1

 (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Change t4fw_version.h to update latest firmware version number

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GCC complains on unused-but-set-variable, clean this up.

Fixes: 23898c76

 ('net/mlx5: E-Switch, Modify node guid on vf set MAC')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, link notifications are not sent by
bond_set_slave_link_state() upon enslavement if
the slave is enslaved when up.

This happens because slave->link default init value
is 0, which is the same as BOND_LINK_UP, resulting
in bond_set_slave_link_state() ignoring this transition.

This patch sets the default value of slave->link to
BOND_LINK_NOCHANGE, assuring it will count as a state
transition and thus trigger notification logic.

Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RTL8152 doesn't have U1U2 and U2P3 features, so use different
runtime functions for RTL812 and RTL8153 by adding autosuspend_en()
to rtl_ops.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 1e4a8064

.

This creates more problems than it solves right now. Compile
testing needs to go in with patches fixing the problems it
uncovers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit fbde2d7d ("MIPS: Add generic SMP IPI support") introduced
code which calls irq_find_matching_host with a NULL node parameter in
order to discover IPI IRQ domains which are not associated with the DT
root node's interrupt parent. This suggests that implementations of IPI
IRQ domains should effectively ignore the node parameter if it is NULL
and search purely based upon the bus token. Commit 2af70a96
("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when
implementing the GIC IPI IRQ domain, and on MIPS Boston boards this
leads to no IPI domain being discovered and a NULL pointer dereference
when attempting to send an IPI:

  CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c
  Oops[#1]:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945
  task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000
  $ 0   : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003
  $ 4   : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000
  $ 8   : 0000000000000000 0000000000000023 0000000000000001 0000000000000001
  $12   : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000
  $16   : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc
  $20   : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000
  $24   : 0000000000000000 ffffffff8012de28
  $28   : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c
  Hi    : ffffffff8014c174
  Lo    : a800000001e1e140
  epc   : ffffffff8016e70c __ipi_send_mask+0x24/0x11c
  ra    : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178
  Status: 140084e2        KX SX UX KERNEL EXL
  Cause : 00800008 (ExcCode 02)
  BadVA : 0000000000000040
  PrId  : 0001a920 (MIPS I6400)
  Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000)
  Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc
            0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c
            0000000000000001 0000000000000020 0000000000000000 0000000000000000
            0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001
            0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8
            a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002
            ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc
            0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001
            ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50
            0000000000000003 a800000001e48308 0000000000000003 0000000000000008
            ...
  Call Trace:
  [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c
  [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178
  [<ffffffff801865e8>] generic_exec_single+0x150/0x170
  [<ffffffff801868b8>] smp_call_function_single+0x108/0x160
  [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394
  [<ffffffff80110534>] __cpu_up+0x38/0x90
  [<ffffffff8012de4c>] bringup_cpu+0x24/0xac
  [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc
  [<ffffffff8012e648>] cpu_up+0x118/0x18c
  [<ffffffff806dc158>] smp_init+0xbc/0xe8
  [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228
  [<ffffffff8056c908>] kernel_init+0x10/0xf0
  [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c

Fix this by allowing the GIC IPI IRQ domain to match purely based upon
the bus token if the node provided is NULL.

Fixes: 2af70a96

 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160705132600.27730-2-paul.burton@imgtec.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

When mapping an interrupt to a VP(E) we must use the identifier for the
VP that the hardware expects, and this does not always match up with the
Linux CPU number. Commit d46812bb ("irqchip: mips-gic: Use HW IDs
for VPE_OTHER_ADDR") corrected this for the cases that existed at the
time it was written, but commit 2af70a96 ("irqchip/mips-gic: Add a
IPI hierarchy domain") added another case before the former patch was
merged. This leads to incorrectly using Linux CPU numbers when mapping
interrupts to VPs, which breaks on certain systems such as those with
multi-core I6400 CPUs. Fix by adding the appropriate call to
mips_cm_vp_id() to retrieve the expected VP identifier.

Fixes: d46812bb ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR")
Fixes: 2af70a96

 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160705132600.27730-1-paul.burton@imgtec.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>