Introduce a new ndo: ndo_get_vf_guid, to get from the net
device the port and node GUID.

New applications can choose to use this interface to show
GUIDs with iproute2 with commands such as:

- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0     link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off

Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Netfilter tables (nftables) implements a software datapath that
comes after tc ingress datapath. The datapath supports offloading
such rules via the flow table offload API.

This API is currently only used by NFT and it doesn't provide the
global priority in regards to tc offload, so we assume offloading such
rules must come after tc. It does provide a flow table priority
parameter, so we need to provide some supported priority range.

For that, split fastpath prio to two, flow table offload and tc offload,
with one dedicated priority chain for flow table offload.

Next patch will re-use the multi chain API to access this chain by
allowing access to this chain by the fdb_sub_namespace.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Next patch will re-use this to add a new chain but in a
different prio.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Tc chains are implemented by creating a chained prio steering type, and
inside it there is a namespace for each chain (FDB_TC_MAX_CHAINS). Each
of those has a list of priorities.

Currently, all namespaces in a prio start at the parent prio level.
But since we can jump from chain (namespace) to another chain in the
same prio, we need the levels for higher chains to be higher as well.
So we created unused prios to account for levels in previous namespaces.

Fix that by accumulating the namespaces levels if we are inside a chained
type prio, and removing the unused prios.

Fixes: 328edb49

 ('net/mlx5: Split FDB fast path prio to multiple namespaces')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Define FDB_TC_LEVELS_PER_PRIO instead of magic number 2.
This is the number of levels used by each tc prio table in the fdb.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Rename it to prepare for next patch that will add a
different type of offload to the FDB.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

FDB_MAX_CHAIN and FDB_MAX_PRIO were defined differently depending
on if CONFIG_MLX5_ESWITCH is enabled to save space on allocations.

This is a minor space saving, and there is no real need for it.
Simplify things instead, and define them the same in both cases.

Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When RoCE is disabled load mlx5_ib in raw_eth profile.
Clean pf_profile roce capability checks as it will not be used without
roce capability.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Rename uplink_rep_profile and its unique init and cleanup stages to
suit its upcoming use as the profile when RoCE is disabled.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Register "enable_roce" param, default value is RoCE enabled.
Current configuration is stored on mlx5_core_dev and exposed to user
through the cmode runtime devlink param.
Changing configuration requires changing the cmode driverinit devlink
param and calling devlink reload.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add documentation for current mlx5 supported devlink param.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

New device parameter to enable/disable handling of RoCE traffic in the
device.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

There is a spelling mistake in a esw_warn warning message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently when a call to  esw_vport_create_legacy_ingress_acl_group
fails the error exit path to label 'out' will cause a kvfree on the
uninitialized pointer spec.  Fix this by ensuring pointer spec is
initialized to NULL to avoid this issue.

Addresses-Coverity: ("Uninitialized pointer read")
Fixes: 10652f39

 ("net/mlx5: Refactor ingress acl configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Instead of deciding a given device is virtual function or
not based on a device is PF or not, use already defined
MLX5_COREDEV_VF by introducing an helper API mlx5_core_is_vf().

This enables to clearly identify PF, VF and non virtual functions.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently on ECPF, metadata is enabled on the ECPF vport = 0xfffe
(manager vport).
Metadata when supported, must be enabled on own vport which is
used to pass metadata to vport of NIC Rx Flow Table.

Due to this error, traffic tagged by ingress ACL is not processed
correctly at NIC rx flow table level which is supposed to work
on metadata tag.

Hence, instead of working on eswitch manager vport, always working on
eswitch own vport regardless of PF or ECPF.

Given that mlx5_eswitch_query/modify_esw_vport_context() is used to
access other vport in legacy mode and own vport settings in switchdev mode,
extend low level API to explicitly specify other_vport.

Fixes: c1286050

 ("net/mlx5: E-Switch, Pass metadata from FDB to eswitch manager")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Drop, untagged, spoof check and untagged spoof check flow groups are
limited to legacy mode only.

Therefore, following refactoring is done to
(a) improve code readability
(b) have better code split between legacy and offloads mode

1. Move legacy flow groups under legacy structure
2. Add validity check for group deletion
3. Restrict scope of esw_vport_disable_ingress_acl to legacy mode
4. Rename esw_vport_enable_ingress_acl() to
esw_vport_create_ingress_acl_table() and limit its scope to
table creation
5. Introduce legacy flow groups creation helper
esw_legacy_create_ingress_acl_groups() and keep its scope to legacy mode
6. Reduce offloads ingress groups from 4 to just 1 metadata group
per vport
7. Removed redundant IS_ERR_OR_NULL as entries are marked NULL on free.
8. Shortern error message to remove redundant 'E-switch'

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Now that there is clear separation for acl setup/cleanup between legacy
and offloads mode, limit metdata disablement to offloads mode.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently legacy mode enables ACL while enabling vport, while offloads
mode enable ACL when moving to offloads mode.

Bring consistency to both modes by enabling/disabling ACL when
enabling/disabling a vport.

It also eliminates creating ingress ACL table on unused ECPF vport in
offloads mode.

Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Introduce and use per vport ACL tables creation and destroy APIs, so that
subsequently patch can use them during enabling/disabling a vport.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

It is better to create/destroy ACL related drop counters where the actual
drop rule ACLs are created/destroyed, so that ACL configuration is self
contained for ingress and egress.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Introduce and use per vport ACL tables creation and destroy APIs, so that
subsequently patch can use them during enabling/disabling a vport in
unified way for legacy vs offloads mode.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In subsequent patch, esw_enable_vport() could fail and return error.
Prepare code to handle such error.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When eswitch is disabled, vport event handler is unregistered.
This unregistration already synchronizes with running EQ event handler
in below code flow.

mlx5_eswitch_disable()
  mlx5_eswitch_event_handlers_unregister()
    mlx5_eq_notifier_unregister()
      atomic_notifier_chain_unregister()
        synchronize_rcu()

notifier_callchain
  eswitch_vport_event()
    queue_work()

Additionally vport->enabled flag is set under state_lock during
esw_enable_vport() but is not read under state_lock in
(a) esw_disable_vport() and (b) under atomic context
eswitch_vport_event().

It is also necessary to synchronize with already scheduled vport event.
This is already achieved using below sequence.

mlx5_eswitch_event_handlers_unregister()
  [..]
  flush_workqueue()

Hence,
(a) Remove vport->enabled check in eswitch_vport_event() which
doesn't make any sense.
(b) Remove redundant flush_workqueue() on every vport disable.
(c) Keep esw_disable_vport() symmetric with esw_enable_vport() for
state_lock.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

To improve code readability, move legacy drop counters and droup rule
under legacy structure.

While at it,
(a) prefix drop flow counters helper with legacy_.
(b) nullify the rule pointers only if they were valid.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Metadata fields are offload mode specific.
To improve code readability, move metadata under offloads structure.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

fdb_table is used for both legacy and offloads mode.
It was incorrect to comment that fdb_table is legacy specific.
Hence, fix the comment to reflect that fdb_table is used in legacy and
offloads mode.

Fixes: 131ce701

 ("net/mlx5: E-Switch, Remove redundant mc_promisc NULL check")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently esw_enable_vport() does vport check for zero to enable drop
counters regardless of execution on ECPF/PF.
While esw_disable_vport() considers such scenario.

To keep consistency across code for checking for manager_vport,
introduce and use mlx5_esw_is_manager_vport() to check if a specified
vport is eswitch manager vport or not.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Between legacy mode and switchdev mode, only two fields are changed,
vlan_tag and flow action.
Hence to avoid duplicte code between two modes, introduce and and use
helper function to configure allowed VLAN rule.

While at it, get rid of duplicate debug message.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Changing the function name esw_ingress_acl_common_config() to
esw_ingress_acl_config() to be consistent with egress config
function naming in offloads mode.

Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Refactor vport egress config in offloads mode

Refactoring vport egress configuration in offloads mode that
includes egress prio tag configuration.
This makes code symmetric to ingress configuration.

Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Changed "managerss" to "managers".

Fixes: a1b3839a

 ("net/mlx5: E-Switch, Properly refer to the esw manager vport")
Signed-off-by: Qing Huang <qing.huang@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Expose maximum scatter entries per RDMA READ for optimal performance.

Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.

Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac7

 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases.  But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.

Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case.  End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.

Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.

This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.

Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes.  We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.

It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.

Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.

In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.

Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac7

 ("elf: enforce  MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping regression fix from Christoph Hellwig:
 "Revert an incorret hunk from a patch that caused problems on various
  arm boards (Andrey Smirnov)"

* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix false positive warnings in dma_common_free_remap()

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes this time around:

   - Fixup of some clock specifications for DRA7 (device-tree fix)

   - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
     warnings at boot

   - A few more minor fixups for OMAPs, most around display

   - Enable STM32 QSPI as =y since their rootfs sometimes comes from
     there

   - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool

   - Fix of thermal zone definition for ux500 (5.4 regression)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
  ARM: dts: ux500: Fix up the CPU thermal zone
  arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unneeded ar-option and KBUILD_ARFLAGS

 - remove long-deprecated SUBDIRS

 - fix modpost to suppress false-positive warnings for UML builds

 - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}

 - make setlocalversion work for /bin/sh

 - make header archive reproducible

 - fix some Makefiles and documents

* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: make headers archive reproducible
  kbuild: update compile-test header list for v5.4-rc2
  kbuild: two minor updates for Documentation/kbuild/modules.rst
  scripts/setlocalversion: clear local variable to make it work for sh
  namespace: fix namespace.pl script to support relative paths
  video/logo: do not generate unneeded logo C files
  video/logo: remove unneeded *.o pattern from clean-files
  integrity: remove pointless subdir-$(CONFIG_...)
  integrity: remove unneeded, broken attempt to add -fshort-wchar
  modpost: fix static EXPORT_SYMBOL warnings for UML build
  kbuild: correct formatting of header in kbuild module docs
  kbuild: remove SUBDIRS support
  kbuild: remove ar-option and KBUILD_ARFLAGS

Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()